COLUBRIS-SYSTEM-MIB

All MIBs › COLUBRIS-SYSTEM-MIB

Organization: Colubris Networks, Inc.

Last Updated: 2010-05-03

Category: Vendor: HP/HPE, Wireless and WLAN

Description: Monitors system resources including CPU load, memory, and uptime on Colubris/HP wireless platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COLUBRIS-SYSTEM-MIB?

COLUBRIS-SYSTEM-MIB is a vendor-specific SNMP module providing generic system identification and status information for Colubris Networks (later HP MSM) wireless devices. It exposes configuration/identity data such as product name, hardware and firmware revisions, serial number, MAC address, and WAN IP address, alongside basic runtime status. It is directly useful for monitoring device software and hardware status: systemUpTime tracks how long the device has been running (revealing unexpected reboots), systemFirmwareRevision and systemFirmwareBuildDate track software version for patch compliance, and systemHardwareRevision/systemSerialNumber support hardware inventory and lifecycle tracking. It is a standalone enterprise system MIB, functioning much like a vendor-specific analogue to the standard SNMPv2-MIB system group. It is typically deployed for baseline inventory and health polling of Colubris/HP wireless access points and controllers in enterprise networks. Engineers can download the COLUBRIS-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COLUBRIS-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Colubris/HP wireless access point
Colubris/HP wireless LAN controller

Monitoring Examples

An administrator would poll systemUpTime to detect unplanned reboots and systemFirmwareRevision together with systemFirmwareBuildDate to confirm all deployed access points are running an approved firmware build. systemProductName, systemHardwareRevision, and systemSerialNumber under systemInfo let an inventory tool automatically catalog device models across a site, while systemWanPortIpAddress helps verify WAN connectivity configuration on gateway-mode units. A sudden drop and reset of systemUpTime across many devices simultaneously would point to a power event or firmware push affecting the whole deployment.

What Can Be Monitored

system uptime
firmware revision and build date
hardware revision
serial number
MAC address
WAN IP address

Imported Objects

From COLUBRIS-SMI

colubrisMgmtV2

OBJECT-IDENTITY

From COLUBRIS-TC

ColubrisAuthenticationMode
ColubrisNotificationEnable
ColubrisProfileIndexOrZero

From IF-MIB

ifInErrors	OBJECT-TYPE
ifInUcastPkts	OBJECT-TYPE
ifOutErrors	OBJECT-TYPE
ifOutUcastPkts	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using systemUpTime OID:

Select a Colubris/HP wireless access point/controller (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type systemUpTime into the Find box to locate it in the OID tree, then select it and click OK. It reports the how long the system has been running since its last restart. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
colubrisSystemMIB	1.3.6.1.4.1.8744.5.6			Generic system information for Colubris Networks devices.
colubrisSystemMIBObjects	1.3.6.1.4.1.8744.5.6.1
systemInfo	1.3.6.1.4.1.8744.5.6.1.1
STR systemProductName	1.3.6.1.4.1.8744.5.6.1.1.1	DisplayString	read-only	HP product name for the device.
STR systemFirmwareRevision	1.3.6.1.4.1.8744.5.6.1.1.2	DisplayString	read-only	Revision number of the device firmware.
STR systemBootRevision	1.3.6.1.4.1.8744.5.6.1.1.3	DisplayString	read-only	Revision number of the device boot loader.
STR systemHardwareRevision	1.3.6.1.4.1.8744.5.6.1.1.4	DisplayString	read-only	Revision number of the system hardware.
STR systemSerialNumber	1.3.6.1.4.1.8744.5.6.1.1.5	DisplayString	read-only	Device serial number.
STR systemConfigurationVersion	1.3.6.1.4.1.8744.5.6.1.1.6	DisplayString	read-write	User-defined string to identify the current device configuration. This string could be anything in printable ASCII characters.
C32 systemUpTimeEx	1.3.6.1.4.1.8744.5.6.1.1.7	Counter32	read-only	How long the system has been running since its last restart. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
MAC systemMacAddress	1.3.6.1.4.1.8744.5.6.1.1.8	MacAddress	accessible-for-notify	MAC address of the device. This information is only returned in a systemHeartbeatNotification event.
IP systemWanPortIpAddress	1.3.6.1.4.1.8744.5.6.1.1.9	IpAddress	accessible-for-notify	IP address of the device WAN port. This information is only returned in a systemHeartbeatNotification event.
STR systemProductFlavor	1.3.6.1.4.1.8744.5.6.1.1.10	DisplayString	read-only	The product flavor can extend or alter the functionality of a HP product.
MAC systemDeviceIdentification	1.3.6.1.4.1.8744.5.6.1.1.11	MacAddress	read-only	Manufacturing Ethernet base MAC address.
OCT systemFirmwareBuildDate	1.3.6.1.4.1.8744.5.6.1.1.12	OCTET STRING	read-only	Build date of the device firmware in the format YYYY/MM/DD.
INT systemControllerMode	1.3.6.1.4.1.8744.5.6.1.1.13	INTEGER	read-only	Indicates the current controller mode.
T/F systemCDPOperState	1.3.6.1.4.1.8744.5.6.1.1.14	TruthValue	read-only	When True indicates that CDP support is enabled.
T/F systemLLDPOperState	1.3.6.1.4.1.8744.5.6.1.1.15	TruthValue	read-only	When True indicates that the LLDP agent is started.
systemTime	1.3.6.1.4.1.8744.5.6.1.2
INT systemTimeUpdateMode	1.3.6.1.4.1.8744.5.6.1.2.1	INTEGER	read-write	Specifies the method and format used to set the system time. 'manual': Operator must configures the system time parameters manually in the GMT zone. 'sntpUdp': Look for time servers in the systemTimeServerTable in order to synchronize the device system time using SNTP. 'tp': Look for time servers in the systemTimeServerTable in order to synchronize the device system time using the Time Protocol.
T/F systemTimeLostWhenRebooting	1.3.6.1.4.1.8744.5.6.1.2.2	TruthValue	read-only	Indicates if the system time is lost after rebooting or not. 'true': Indicates that the system time has been lost. 'false': Indicates that the system time has been kept.
T/F systemTimeDSTOn	1.3.6.1.4.1.8744.5.6.1.2.3	TruthValue	read-write	Specifies if the system time need to be adjusted to compensate for daylight savings. 'true': Adjusts the system time by adding one hour. 'false': Keep the current system time.
OCT systemDate	1.3.6.1.4.1.8744.5.6.1.2.4	OCTET STRING	read-write	Specifies the current GMT system date when systemTimeUpdateMode attribute is set to 'manual' mode. Reading this attribute will return the current date. Specify year (1995-3000), month (01-12), and day (01-31) in the format YYYY/MM/DD. The '/' character is mandatory between the fields.
OCT systemTimeOfDay	1.3.6.1.4.1.8744.5.6.1.2.5	OCTET STRING	read-write	Specifies the current GMT system time when systemTimeUpdateMode attribute is set to 'manual' mode. Specify hour (00-24), minutes (00-59), and seconds (00-59) in the format HH:MM:SS. The ':' character is mandatory between the fields.
OCT systemTimeZone	1.3.6.1.4.1.8744.5.6.1.2.6	OCTET STRING	read-write	Specifies the current system time zone in the relation to UTC. Specify the direction from UTC (+ or -), hours from UTC (00-14 or 00-12), and minutes from UTC (00 or 30) in the format +/-HH:MM. The '+' or '-' character is mandatory at the beginning of the expression. The ':' character is mandatory between the time fields.
systemTimeServerTable	1.3.6.1.4.1.8744.5.6.1.2.7		not-accessible	A table containing the list of SNTP time servers that can be used to synchronize the system time. In tabular form to allow multiple instances on an agent.
systemTimeServerEntry	1.3.6.1.4.1.8744.5.6.1.2.7.1		not-accessible	A SNTP time server used to get the device time. systemTimeServerIndex - Uniquely identifies a time server in the table.
I32 systemTimeServerIndex	1.3.6.1.4.1.8744.5.6.1.2.7.1.1	Integer32	not-accessible	Index of the time server in the systemTimeServerTable.
STR systemTimeServerAddress	1.3.6.1.4.1.8744.5.6.1.2.7.1.2	DisplayString	read-write	Specifies the DNS name or IP address of the time server to use. Setting an entry to a null string will delete the entry.
COL systemTimeServerNotificationEnabled	1.3.6.1.4.1.8744.5.6.1.2.8	ColubrisNotificationEnable	read-write	Specifies if timeServerFailure notifications are generated.
adminAccess	1.3.6.1.4.1.8744.5.6.1.3
COL adminAccessAuthenMode	1.3.6.1.4.1.8744.5.6.1.3.1	ColubrisAuthenticationMode	read-write	Specifies if administrator authentication is performed locally or via a RADIUS server. You must have configured a RADIUS profile and the adminAccessAuthenProfileIndex attribute before you can select a profile or an error will be returned.
COL adminAccessAuthenProfileIndex	1.3.6.1.4.1.8744.5.6.1.3.2	ColubrisProfileIndexOrZero	read-write	Specifies the RADIUS profile to be used in order to authenticate the administrator. This parameter only applies when the adminAccessAuthenMode is set to 'profile'. When the special value zero is specified, no RADIUS server profile is selected.
I32 adminAccessMaxLoginAttempts	1.3.6.1.4.1.8744.5.6.1.3.3	Integer32	read-write	Specifies the number of successive unsuccessful authentications that must occur to generate an adminAccessAuthFailureNotification event.
I32 adminAccessLockOutPeriod	1.3.6.1.4.1.8744.5.6.1.3.4	Integer32	read-write	Specifies the duration when further login attempts are blocked after adminAccessMaxLoginAttempts has been reached. Setting this value to zero disables the lock out feature.
COL adminAccessLoginNotificationEnabled	1.3.6.1.4.1.8744.5.6.1.3.5	ColubrisNotificationEnable	read-write	Specifies if an adminAccessLoginNotification event is generated after an administrator is successfully authenticated.
COL adminAccessAuthFailureNotificationEnabled	1.3.6.1.4.1.8744.5.6.1.3.6	ColubrisNotificationEnable	read-write	Specifies if an adminAccessAuthFailureNotification event is generated when the number of successive unsuccessful authentications attempts exceed the value of adminAccessMaxLoginAttempts.
STR adminAccessInfo	1.3.6.1.4.1.8744.5.6.1.3.7	DisplayString	accessible-for-notify	Contains various information about the administrator. This parameter is used in the adminAccessAuthFailureNotification event to return the administrator status to a management system.
adminAccessProfileTable	1.3.6.1.4.1.8744.5.6.1.3.8		not-accessible	This table handles the profile of several administrator users. In tabular form in order to allow multiple instances on an agent.
adminAccessProfileEntry	1.3.6.1.4.1.8744.5.6.1.3.8.1		not-accessible	An administrator profile configured in the administrator access table.
I32 adminAccessProfileIndex	1.3.6.1.4.1.8744.5.6.1.3.8.1.1	Integer32	not-accessible	Specifies the index of the administrator profile.
OCT adminAccessUserName	1.3.6.1.4.1.8744.5.6.1.3.8.1.2	OCTET STRING	read-only	Specifies the user name of the administrator.
INT adminAccessAdministrativeRights	1.3.6.1.4.1.8744.5.6.1.3.8.1.3	INTEGER	read-only	Specifies the administrative rights of this specific administrator.
COL adminAccessLogoutNotificationEnabled	1.3.6.1.4.1.8744.5.6.1.3.9	ColubrisNotificationEnable	read-write	Specifies if an adminAccessLogoutNotification event is generated after an administrator logs out from the web interface.
heartbeat	1.3.6.1.4.1.8744.5.6.1.4
I32 heartbeatPeriod	1.3.6.1.4.1.8744.5.6.1.4.1	Integer32	read-write	Specifies the delay between 2 heartbeat notifications. The range of this parameter is 30 seconds to 1 year.
COL heartbeatNotificationEnabled	1.3.6.1.4.1.8744.5.6.1.4.2	ColubrisNotificationEnable	read-write	Specifies if systemHeartbeatNotification events are generated.
colubrisSystemMIBNotificationPrefix	1.3.6.1.4.1.8744.5.6.2
colubrisSystemMIBNotifications	1.3.6.1.4.1.8744.5.6.2.0
NTF adminAccessAuthFailureNotification	1.3.6.1.4.1.8744.5.6.2.0.1			Sent after an administrator authentication failure.
NTF adminAccessLoginNotification	1.3.6.1.4.1.8744.5.6.2.0.2			Sent after an administrator is successfully authenticated.
NTF systemColdStart	1.3.6.1.4.1.8744.5.6.2.0.3			Sent at system boot up.
NTF systemHeartbeatNotification	1.3.6.1.4.1.8744.5.6.2.0.4			Sent every heartbeatPeriod.
NTF adminAccessLogoutNotification	1.3.6.1.4.1.8744.5.6.2.0.5			Sent after an administrator has logout.
NTF timeServerFailure	1.3.6.1.4.1.8744.5.6.2.0.6			Sent when a time server in the system time table is unreachable.
colubrisSystemMIBConformance	1.3.6.1.4.1.8744.5.6.3
colubrisSystemMIBCompliances	1.3.6.1.4.1.8744.5.6.3.1
colubrisSystemMIBCompliance	1.3.6.1.4.1.8744.5.6.3.1.1			The compliance statement for entities which implement the Colubris Networks System MIB.
colubrisSystemMIBComplianceDeprecated	1.3.6.1.4.1.8744.5.6.3.1.2			The compliance statement for deprecated entities which implement the Colubris Networks System MIB.
colubrisSystemMIBGroups	1.3.6.1.4.1.8744.5.6.3.2
colubrisSystemMIBGroup	1.3.6.1.4.1.8744.5.6.3.2.1			A collection of objects providing the System MIB capability.
colubrisAdminAccessProfileGroup	1.3.6.1.4.1.8744.5.6.3.2.2			A collection of objects providing the administrator access configuration capability.
colubrisSystemNotificationGroup	1.3.6.1.4.1.8744.5.6.3.2.3			A collection of supported notifications
colubrisAdminAccessNotificationGroup	1.3.6.1.4.1.8744.5.6.3.2.4			A collection of supported notifications
colubrisTimeNotificationGroup	1.3.6.1.4.1.8744.5.6.3.2.5			A collection of supported notifications
colubrisSystemMIBDeprecatedGroup	1.3.6.1.4.1.8744.5.6.3.2.6			A collection of deprecated objects providing the System MIB capability.

RFC description

Colubris Networks system MIB for generic system information and device management on wireless access platforms.

Start monitoring Colubris/HP wireless access point/controller (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COLUBRIS-SYSTEM-MIB