| OID symbolic | OID numeric | Type | Access | Description |
|---|
| cienaCesRsvpteMIB | 1.3.6.1.4.1.1271.2.1.16 | | | This MIB module is for the RSVP-TE configuration for MPLS tunnels |
| cienaCesRsvpteMIBObjects | 1.3.6.1.4.1.1271.2.1.16.1 | | | |
| cienaCesRsvpteObjects | 1.3.6.1.4.1.1271.2.1.16.1.1 | | | |
| CIE cienaCesRsvpteAdminStatus | 1.3.6.1.4.1.1271.2.1.16.1.1.1 | CienaGlobalState | read-only | The desired administrative status of RSVP-TE. |
| RSV cienaCesRsvpteOperStatus | 1.3.6.1.4.1.1271.2.1.16.1.1.2 | RsvpOperStatus | read-only | The current operational status of RSVP-TE. |
| U32 cienaCesRsvpteRetryInterval | 1.3.6.1.4.1.1271.2.1.16.1.1.3 | Unsigned32 | read-only | The persistent tunnel retry interval.
This is the interval between the first failure of a persistent
tunnel and the first attempt to re-establish the tunnel.
This cannot be changed while the administrative status is enabled
or the operational status is up. |
| INT cienaCesRsvpteRetryInfiniteState | 1.3.6.1.4.1.1271.2.1.16.1.1.4 | INTEGER | read-only | The persistent tunnel retry infinity.
This is the state which when on, triggers RSVP-TE to try to restore the tunnels
infinite times. This object can only be set if RSVP-TE is globally disabled. |
| INT cienaCesRsvpteRetryMax | 1.3.6.1.4.1.1271.2.1.16.1.1.5 | INTEGER | read-only | The maximum number of retry attempts that will be made before a
persistent tunnel is deemed inoperable. Once in this state,
a management agent should set mplsTunnelAdminStatus to 'up' to
attempt to re-establish the tunnel. This field is not used when
cienaCesRsvpteRetryInfiniteState is on. |
| I32 cienaCesRsvpteRefreshInterval | 1.3.6.1.4.1.1271.2.1.16.1.1.6 | Integer32 | read-only | The RSVP-TE value, R, which is used to set the average
interval between refresh path and RESV messages. |
| I32 cienaCesRsvpteRefreshMultiple | 1.3.6.1.4.1.1271.2.1.16.1.1.7 | Integer32 | read-only | The RSVP-TE value, K, which is the number of unresponded path
or RESV refresh attempts that must be made, spaced by
the refresh interval, before the state is deemed to have
timed out. |
| I32 cienaCesRsvpteRfrshSlewDenom | 1.3.6.1.4.1.1271.2.1.16.1.1.8 | Integer32 | read-only | This object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewDenominator in this table. |
| I32 cienaCesRsvpteRfrshSlewNumerator | 1.3.6.1.4.1.1271.2.1.16.1.1.9 | Integer32 | read-only | This object is deprecated and the new object to provide this information is
cienaCesRsvpteRefreshSlewNumerator in this table. |
| I32 cienaCesRsvpteBlockadeMultiple | 1.3.6.1.4.1.1271.2.1.16.1.1.10 | Integer32 | read-only | The RSVP-TE value, Kb, which is the number of refresh timeout
periods after which the blockade state is deleted. |
| I32 cienaCesRsvpteLSPSetupPriority | 1.3.6.1.4.1.1271.2.1.16.1.1.11 | Integer32 | read-only | The setup priority to apply to LSPs that are not
signaling this parameter. 0 represents the highest
priority and 7 the lowest. The value of this object must be
numerically greater than or equal to (lower or equal priority)
than the value of the holding priority object. |
| I32 cienaCesRsvpteLSPHoldingPriority | 1.3.6.1.4.1.1271.2.1.16.1.1.12 | Integer32 | read-only | The holding priority to apply to LSPs that are not
signaling this parameter. 0 represents the highest
priority and 7 the lowest. The value of this object must be
numerically less than or equal to (higher or equal priority)
than the value of the holding priority object. |
| T/F cienaCesRsvpteUseHopByHop | 1.3.6.1.4.1.1271.2.1.16.1.1.13 | TruthValue | read-only | A flag to indicate that RSVP-TE should use the hop by hop
addressing scheme for the PATH and PATH-TEAR messages it
sends. If set, then the IP addresses used in the IP header
of the PATH messages forwarded by RSVP-TE set the source as the
local outgoing interface IP address, and set the destination as
the next hop router IP address. |
| T/F cienaCesRsvpteRestartCapable | 1.3.6.1.4.1.1271.2.1.16.1.1.14 | TruthValue | read-only | A flag to indicate whether the local node should advertise
itself as restart capable. |
| U32 cienaCesRsvpteRestartTime | 1.3.6.1.4.1.1271.2.1.16.1.1.15 | Unsigned32 | read-only | The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP-TE communication. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
Only used if cienaCesRsvpteRestartCapable is set to true.
For devices which only act as the Helper node, this timer
is unused and will return value 0. |
| U32 cienaCesRsvpteRecoveryTime | 1.3.6.1.4.1.1271.2.1.16.1.1.16 | Unsigned32 | read-only | The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP-TE and
MPLS forwarding information after the re-establishment of
Hello connectivity. This is advertised to neighbors in
the Restart_Cap object in Hello messages.
A value of zero indicates that the node does not support
resynchronization following failure of the local node.
A value of 0xFFFFFFFF indicates an infinite recovery time.
Only used if cienaCesRsvpteRestartCapable is set to true.
For devices which only act as the Helper node, this timer
is unused and will return value 0. |
| I32 cienaCesRsvpteMinPeerRestart | 1.3.6.1.4.1.1271.2.1.16.1.1.17 | Integer32 | read-only | The mininum period of time in milliseconds that RSVP-TE
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication loss.
RSVP-TE waits for the maximum of this time and the
restart_time advertised in the RESTART_CAP object in Hello
messages from the neighbor. |
| I32 cienaCesRsvpteRefreshSlewDenominator | 1.3.6.1.4.1.1271.2.1.16.1.1.18 | Integer32 | read-only | The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fraction until it reaches the new desired value. |
| I32 cienaCesRsvpteRefreshSlewNumerator | 1.3.6.1.4.1.1271.2.1.16.1.1.19 | Integer32 | read-only | The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
fraction until it reaches the new desired value. |
| CIE cienaCesRsvpteGRAdminStatus | 1.3.6.1.4.1.1271.2.1.16.1.1.20 | CienaGlobalState | read-only | RSVP-TE Graceful restart status (Enabled/Disabled). |
| RSV cienaCesRsvpteGRMode | 1.3.6.1.4.1.1271.2.1.16.1.1.21 | RsvpGRMode | read-only | RSVP-TE Graceful restart Operational status. |
| cienaCesRsvpte | 1.3.6.1.4.1.1271.2.1.16.1.2 | | | |
| cienaCesRsvpteIfTable | 1.3.6.1.4.1.1271.2.1.16.1.2.1 | | not-accessible | A table of interfaces on which RSVP-TE can be enabled. |
| cienaCesRsvpteIfEntry | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1 | | not-accessible | An entry in the RSVP-TE interface table. |
| INT cienaCesRsvpteIfIndex | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1 | INTEGER | not-accessible | Interface index. |
| OCT cienaCesRsvpteIfName | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2 | OCTET STRING | read-only | Interface name. |
| IP cienaCesRsvpteIfIpAddr | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3 | IpAddress | read-only | Interface IP address. |
| INT cienaCesRsvpteIfMtu | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4 | INTEGER | read-only | This object is deprecated and no longer in use. |
| CIE cienaCesRsvpteIfAdminStatus | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5 | CienaGlobalState | read-only | RSVP-TE administrative status on this interface. |
| INT cienaCesRsvpteIfOperStatus | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6 | INTEGER | read-only | RSVP-TE operational status on this interface. |
| U32 cienaCesRsvpteIfHelloInterval | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7 | Unsigned32 | read-only | RSVP-TE Hello message interval. |
| U32 cienaCesRsvpteIfHelloTolerance | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8 | Unsigned32 | read-only | RSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a
successful Hello message from a partner before the Hello session times out. |
| ADV cienaCesRsvpteIfAdvertisedLabel | 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9 | AdvertisedLabel | read-only | This object indicates what kind of label will be advertised by RSVP-TE for a
Label Request received on this L3 interface. |
