All MIBs › ACC-DIALMGMT
Category: Vendor: ACC/Ericsson
Description: Manages dial-access management on ACC/Ericsson routers, providing call admission control, dial policy, and modem/ISDN resource allocation.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ACC-DIALMGMT?
ACC-DIALMGMT is an enterprise MIB for ACC/Ericsson routers covering dial-access management, including call admission control, dial policy, and allocation of modem/ISDN resources. It exposes configuration and status objects governing how many simultaneous dial sessions are permitted and how modem/ISDN channel resources are assigned to incoming or outgoing calls. Its monitoring relevance is in resource availability and admission-control status: an operator can see whether the modem or ISDN channel pool is exhausted, which directly signals a hardware/capacity problem affecting the device's ability to accept new dial-up sessions. It complements ACC-ASYNC, which covers physical async ports, and ACC-CM, which covers individual connection state, to give the full dial-access resource picture. It is deployed on ACC/Ericsson access routers serving as dial-in concentrators or dial-backup gateways, as defined in the ACC-DIALMGMT MIB.
IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-DIALMGMT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ACC/Ericsson dial-access router/concentrator
Monitoring Examples
An administrator polls the dial-resource pool objects to see how many modem/ISDN channels are currently in use versus the total available, and checks the admission-control policy objects to confirm call limits are set appropriately for the site. If the in-use channel count is consistently at the pool maximum, that indicates the dial concentrator is undersized for current demand and calls are likely being rejected.
What Can Be Monitored
- modem/ISDN channel pool utilization
- call admission control policy
- available versus in-use dial resources
This MIB depends on
Related MIBs
Imported Objects
From ACC-MIB
| DisplayString | |
| IfIndex | |
| RowStatus | |
| SmdsAddress | |
| accBRG | OBJECT-IDENTITY |
From ACC-SYSTEM
| accTrapLogSeqNum | OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| OBJECT-TYPE | |
| TimeTicks |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| accDl2 | 1.3.6.1.4.1.5.1.1.70 | |||
| accDl2Sys | 1.3.6.1.4.1.5.1.1.70.1 | |||
| INT accDl2SysCICBase | 1.3.6.1.4.1.5.1.1.70.1.1 | INTEGER | read-write | Base value for DL2 circuit CICs for this system |
| INT accDl2SysEvenTCPPort | 1.3.6.1.4.1.5.1.1.70.1.2 | INTEGER | read-write | TCP port to use for DL2 signaling for even numbered CICs |
| INT accDl2SysOddTCPPort | 1.3.6.1.4.1.5.1.1.70.1.3 | INTEGER | read-write | TCP port to use for DL2 signaling for odd numbered CICs |
| INT accDl2SysRetrasnsmitTime | 1.3.6.1.4.1.5.1.1.70.1.4 | INTEGER | read-write | Value in seconds to use for DL2 restransmit timers (T1, T12, T14, T16 & T22). |
| INT accDl2SysCircuitTimeout | 1.3.6.1.4.1.5.1.1.70.1.5 | INTEGER | read-write | Value in seconds to use for DL2 circuit timeout (T5, T13, T15, T17 & T23). |
| INT accDl2SysT7 | 1.3.6.1.4.1.5.1.1.70.1.6 | INTEGER | read-write | Value in seconds to use for DL2 T7 timer |
| INT accDl2SysT9 | 1.3.6.1.4.1.5.1.1.70.1.7 | INTEGER | read-write | Value in seconds to use for DL2 T9 timer |
| IP accDl2SysTestEvenAddr | 1.3.6.1.4.1.5.1.1.70.1.8 | IpAddress | read-write | Address to establish back-to-back test DL2 TCP connections with for even CIC signaling channel. |
| IP accDl2SysTestOddAddr | 1.3.6.1.4.1.5.1.1.70.1.9 | IpAddress | read-write | Address to establish back-to-back test DL2 TCP connections with for odd CIC signaling channel. |
| CTR accDl2SysCompletedCalls | 1.3.6.1.4.1.5.1.1.70.1.10 | Counter | read-only | Count of calls completed using DL2 signaling. |
| CTR accDl2SysClearedCalls | 1.3.6.1.4.1.5.1.1.70.1.11 | Counter | read-only | Count of DL2 signaled calls cleared. |
| CTR accDl2SysOriginatedCalls | 1.3.6.1.4.1.5.1.1.70.1.12 | Counter | read-only | Count of calls originated on DL2 signal interfaces. |
| CTR accDl2SysRoutedCalls | 1.3.6.1.4.1.5.1.1.70.1.13 | Counter | read-only | Count of DL2 calls originated that have been routed by the network. |
| CTR accDl2SysOfferedCalls | 1.3.6.1.4.1.5.1.1.70.1.14 | Counter | read-only | Count of DL2 calls offered in the incoming direction. |
| CTR accDl2SysAcceptedCalls | 1.3.6.1.4.1.5.1.1.70.1.15 | Counter | read-only | Count of DL2 calls offered that have been accepted. |
| CTR accDl2SysRetransmissions | 1.3.6.1.4.1.5.1.1.70.1.16 | Counter | read-only | Count of DL2 signaling messages that required retransmission by the signaling protocol becasue the appropriate response was not received within the retransmit period. |
| CTR accDl2SysTimeouts | 1.3.6.1.4.1.5.1.1.70.1.17 | Counter | read-only | Count of DL2 circuit timeouts. |
| CTR accDl2SysUnexpEvents | 1.3.6.1.4.1.5.1.1.70.1.18 | Counter | read-only | Count of unexpected DL2 signaling messages. |
| CTR accDl2SysBadMessages | 1.3.6.1.4.1.5.1.1.70.1.19 | Counter | read-only | Count of unknown DL2 message types reveiced. |
| CTR accDl2SysBadCICs | 1.3.6.1.4.1.5.1.1.70.1.20 | Counter | read-only | Count of signaling messages received that contain CICs not configured on this unit. |
| accDl2InfcTable | 1.3.6.1.4.1.5.1.1.70.2 | not-accessible | DL2 interface table containing parameter and status information for each DL2 interface on this router. | |
| accDl2InfcEntry | 1.3.6.1.4.1.5.1.1.70.2.1 | not-accessible | Configuration and status objects for a particular DL2 interface. | |
| INT accDl2InfcIndex | 1.3.6.1.4.1.5.1.1.70.2.1.1 | INTEGER | read-only | ifIndex for this DL2 interface. |
| INT accDl2InfcAdminStatus | 1.3.6.1.4.1.5.1.1.70.2.1.2 | INTEGER | read-write | Admin status of this DL2 interface. |
| INT accDl2InfcCDNG | 1.3.6.1.4.1.5.1.1.70.2.1.3 | INTEGER | read-write | Called Number Group to use for calls on this interface. |
| INT accDl2InfcCICBase | 1.3.6.1.4.1.5.1.1.70.2.1.4 | INTEGER | read-write | CIC base to use for circuits on this interface. |
| INT accDl2InfcMsgLvl | 1.3.6.1.4.1.5.1.1.70.2.1.5 | INTEGER | read-write | Maintainance message level. |
| accDl2CrctTable | 1.3.6.1.4.1.5.1.1.70.3 | not-accessible | DL2 circuit table containing parameter and status information for each DL2 circuit on this router. | |
| accDl2CrctEntry | 1.3.6.1.4.1.5.1.1.70.3.1 | not-accessible | Configuration and status objects for a particular DL2 circuit. | |
| INT accDl2CrctIndex | 1.3.6.1.4.1.5.1.1.70.3.1.1 | INTEGER | read-only | CIC for this DL2 circuit. |
| INT accDl2CrctInfc | 1.3.6.1.4.1.5.1.1.70.3.1.2 | INTEGER | read-only | ifIndex of interface this circuit is on. |
| INT accDl2CrctTimeslot | 1.3.6.1.4.1.5.1.1.70.3.1.3 | INTEGER | read-only | Timeslot this circuit is on within the DL2 interface. |
| INT accDl2CrctStatus | 1.3.6.1.4.1.5.1.1.70.3.1.4 | INTEGER | read-write | Status of this circuit. |
| INT accDl2CrctState | 1.3.6.1.4.1.5.1.1.70.3.1.5 | INTEGER | read-only | Indicates whether this circuit currently bears a call. |
| accDl2CallTable | 1.3.6.1.4.1.5.1.1.70.4 | not-accessible | DL2 call table containing parameter and status information for each current DL2 call on this router. | |
| accDl2CallEntry | 1.3.6.1.4.1.5.1.1.70.4.1 | not-accessible | Status objects for a particular DL2 call. | |
| INT accDl2CallIndex | 1.3.6.1.4.1.5.1.1.70.4.1.1 | INTEGER | read-only | CIC this call is established over. |
| INT accDl2CallInfc | 1.3.6.1.4.1.5.1.1.70.4.1.2 | INTEGER | read-only | ifIndex of interface this call is on. |
| INT accDl2CallTimeslot | 1.3.6.1.4.1.5.1.1.70.4.1.3 | INTEGER | read-only | Timeslot this call is on within the DL2 interface. |
| INT accDl2CallEndpoint | 1.3.6.1.4.1.5.1.1.70.4.1.4 | INTEGER | read-write | ifIndex of the endpoint used to terminate this call. |
| INT accDl2CallType | 1.3.6.1.4.1.5.1.1.70.4.1.5 | INTEGER | read-only | Information transfer type for this call. |
| INT accDl2CallDirection | 1.3.6.1.4.1.5.1.1.70.4.1.6 | INTEGER | read-only | Direction of call. |
| OCT accDl2CallAddress | 1.3.6.1.4.1.5.1.1.70.4.1.7 | OCTET STRING | read-only | Remote address for this call. |
| INT accDl2CallState | 1.3.6.1.4.1.5.1.1.70.4.1.8 | INTEGER | read-only | State the signaling manager is in for this call. |
| TIK accDl2CallDuration | 1.3.6.1.4.1.5.1.1.70.4.1.9 | TimeTicks | read-only | Amount of time this call has been active. |
| accDialMgmt | 1.3.6.1.4.1.5.1.1.80 | |||
| accSignalingGroups | 1.3.6.1.4.1.5.1.1.80.1 | |||
| accSignalGroupTable | 1.3.6.1.4.1.5.1.1.80.1.1 | not-accessible | ||
| accSignalGroupEntry | 1.3.6.1.4.1.5.1.1.80.1.1.1 | not-accessible | ||
| INT accSignalGroupIndex | 1.3.6.1.4.1.5.1.1.80.1.1.1.1 | INTEGER | read-only | Signal Group |
| INT accSignalGroupType | 1.3.6.1.4.1.5.1.1.80.1.1.1.2 | INTEGER | read-write | Group Type |
| INT accSignalGroupEntryStatus | 1.3.6.1.4.1.5.1.1.80.1.1.1.3 | INTEGER | read-write | Entry Status |
| INT accSignalGroupAdminStatus | 1.3.6.1.4.1.5.1.1.80.1.1.1.4 | INTEGER | read-write | Admin Status |
| OCT accSignalGroupAuthName | 1.3.6.1.4.1.5.1.1.80.1.1.1.5 | OCTET STRING | read-write | Auth Name |
| OCT accSignalGroupAuthPassword | 1.3.6.1.4.1.5.1.1.80.1.1.1.6 | OCTET STRING | read-write | Auth Password |
| INT accSignalGroupOperStatus | 1.3.6.1.4.1.5.1.1.80.1.1.1.7 | INTEGER | read-only | Oper Status |
| TIK accSignalGroupPollInterval | 1.3.6.1.4.1.5.1.1.80.1.1.1.8 | TimeTicks | read-write | Poll Interval |
| TIK accSignalGroupWaitInterval | 1.3.6.1.4.1.5.1.1.80.1.1.1.9 | TimeTicks | read-write | Wait Interval |
| INT accSignalGroupRetryCount | 1.3.6.1.4.1.5.1.1.80.1.1.1.10 | INTEGER | read-write | Retry Count |
| TIK accSignalGroupRetryInterval | 1.3.6.1.4.1.5.1.1.80.1.1.1.11 | TimeTicks | read-write | Retry Interval |
| TIK accSignalGroupRetryBackoff | 1.3.6.1.4.1.5.1.1.80.1.1.1.12 | TimeTicks | read-write | Retry Backoff |
| OCT accSignalGroupPriIpAddress | 1.3.6.1.4.1.5.1.1.80.1.1.1.13 | OCTET STRING | read-write | Pri Addr |
| INT accSignalGroupPriTcpPort | 1.3.6.1.4.1.5.1.1.80.1.1.1.14 | INTEGER | read-write | Pri Port |
| OCT accSignalGroupSecIpAddress | 1.3.6.1.4.1.5.1.1.80.1.1.1.15 | OCTET STRING | read-write | Alt Addr |
| INT accSignalGroupSecTcpPort | 1.3.6.1.4.1.5.1.1.80.1.1.1.16 | INTEGER | read-write | Alt Port |
| INT accSignalGroupCdnGroup | 1.3.6.1.4.1.5.1.1.80.1.1.1.17 | INTEGER | read-write | Number Group |
| INT accSignalGroupLastCause | 1.3.6.1.4.1.5.1.1.80.1.1.1.18 | INTEGER | read-only | Last Cause |
| INT accSignalGroupMsgLevel | 1.3.6.1.4.1.5.1.1.80.1.1.1.19 | INTEGER | read-write | Message Level |
| accSignalGroupStatTable | 1.3.6.1.4.1.5.1.1.80.1.2 | not-accessible | ||
| accSignalGroupStatEntry | 1.3.6.1.4.1.5.1.1.80.1.2.1 | not-accessible | ||
| INT accSignalGroupStatIndex | 1.3.6.1.4.1.5.1.1.80.1.2.1.1 | INTEGER | read-only | Signal Group |
| CTR accSignalGroupInMessages | 1.3.6.1.4.1.5.1.1.80.1.2.1.2 | Counter | read-only | Incoming Msgs |
| CTR accSignalGroupInOctets | 1.3.6.1.4.1.5.1.1.80.1.2.1.3 | Counter | read-only | Incoming Octets |
| CTR accSignalGroupInErrors | 1.3.6.1.4.1.5.1.1.80.1.2.1.4 | Counter | read-only | Incoming Errors |
| CTR accSignalGroupOutMessages | 1.3.6.1.4.1.5.1.1.80.1.2.1.5 | Counter | read-only | Outgoing Msgs |
| CTR accSignalGroupOutOctets | 1.3.6.1.4.1.5.1.1.80.1.2.1.6 | Counter | read-only | Outgoing Octets |
| CTR accSignalGroupOutErrors | 1.3.6.1.4.1.5.1.1.80.1.2.1.7 | Counter | read-only | Outgoing Errors |
| CTR accSignalGroupOriginatedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.8 | Counter | read-only | Calls Orig |
| CTR accSignalGroupOfferedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.9 | Counter | read-only | Calls Offered |
| CTR accSignalGroupRoutedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.10 | Counter | read-only | Calls Routed |
| CTR accSignalGroupAcceptedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.11 | Counter | read-only | Calls Accepted |
| CTR accSignalGroupConnectedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.12 | Counter | read-only | Calls Connected |
| CTR accSignalGroupClearedCalls | 1.3.6.1.4.1.5.1.1.80.1.2.1.13 | Counter | read-only | Calls Cleared |
| accSignalGroupCallTable | 1.3.6.1.4.1.5.1.1.80.1.3 | not-accessible | ||
| accSignalGroupCallEntry | 1.3.6.1.4.1.5.1.1.80.1.3.1 | not-accessible | ||
| INT accSignalGroupCallIndex | 1.3.6.1.4.1.5.1.1.80.1.3.1.1 | INTEGER | read-only | Signal Group |
| INT accSignalGroupCallIdent | 1.3.6.1.4.1.5.1.1.80.1.3.1.2 | INTEGER | read-only | CallId |
| INT accSignalGroupCallDirection | 1.3.6.1.4.1.5.1.1.80.1.3.1.3 | INTEGER | read-only | Direction |
| INT accSignalGroupCallDialEndpt | 1.3.6.1.4.1.5.1.1.80.1.3.1.4 | INTEGER | read-only | DialEndpt |
| INT accSignalGroupCallChannelId | 1.3.6.1.4.1.5.1.1.80.1.3.1.5 | INTEGER | read-only | Channel Id |
| INT accSignalGroupCallTermEndpt | 1.3.6.1.4.1.5.1.1.80.1.3.1.6 | INTEGER | read-only | Term Endpt |
| INT accSignalGroupCallState | 1.3.6.1.4.1.5.1.1.80.1.3.1.7 | INTEGER | read-only | State |
| INT accSignalGroupCallCause | 1.3.6.1.4.1.5.1.1.80.1.3.1.8 | INTEGER | read-only | Cause |
| OCT accSignalGroupCallCdNumber | 1.3.6.1.4.1.5.1.1.80.1.3.1.9 | OCTET STRING | read-only | Cd Number |
| OCT accSignalGroupCallCgNumber | 1.3.6.1.4.1.5.1.1.80.1.3.1.10 | OCTET STRING | read-only | Cg Number |
| INT accSignalGroupCallInfoType | 1.3.6.1.4.1.5.1.1.80.1.3.1.11 | INTEGER | read-only | Info Type |
| INT accSignalGroupCallInfoMode | 1.3.6.1.4.1.5.1.1.80.1.3.1.12 | INTEGER | read-only | Info Mode |
| INT accSignalGroupCallInfoRate | 1.3.6.1.4.1.5.1.1.80.1.3.1.13 | INTEGER | read-only | Info Rate |
| INT accSignalGroupCallL1Proto | 1.3.6.1.4.1.5.1.1.80.1.3.1.14 | INTEGER | read-only | L1 Proto |
| INT accSignalGroupCallL1Framing | 1.3.6.1.4.1.5.1.1.80.1.3.1.15 | INTEGER | read-only | L1 Framing |
| INT accSignalGroupCallUserRate | 1.3.6.1.4.1.5.1.1.80.1.3.1.16 | INTEGER | read-only | User Rate |
| TIK accSignalGroupCallDuration | 1.3.6.1.4.1.5.1.1.80.1.3.1.17 | TimeTicks | read-only | Duration |
| accSignalGroupMediaTable | 1.3.6.1.4.1.5.1.1.80.1.4 | not-accessible | Table of media parameters for each call on the given signal group | |
| accSignalGroupMediaEntry | 1.3.6.1.4.1.5.1.1.80.1.4.1 | not-accessible | An entry in the signal group media table | |
| INT accSignalGroupMediaIndex | 1.3.6.1.4.1.5.1.1.80.1.4.1.1 | INTEGER | read-only | The index of the signal group for which this entry in the table applies |
| INT accSignalGroupMediaIdent | 1.3.6.1.4.1.5.1.1.80.1.4.1.2 | INTEGER | read-only | The call id of the call for which this entry in the table applies |
| INT accSignalGroupMediaType | 1.3.6.1.4.1.5.1.1.80.1.4.1.3 | INTEGER | read-only | The media type for this call |
| INT accSignalGroupMediaCodecType | 1.3.6.1.4.1.5.1.1.80.1.4.1.4 | INTEGER | read-only | The codec type for this call |
| INT accSignalGroupMediaPayldType | 1.3.6.1.4.1.5.1.1.80.1.4.1.5 | INTEGER | read-only | The payload type for this call |
| INT accSignalGroupMediaPayldTos | 1.3.6.1.4.1.5.1.1.80.1.4.1.6 | INTEGER | read-only | The type of service used for this call |
| INT accSignalGroupMediaFrameSize | 1.3.6.1.4.1.5.1.1.80.1.4.1.7 | INTEGER | read-only | The frame size used for this call |
| OCT accSignalGroupMediaIpAddress | 1.3.6.1.4.1.5.1.1.80.1.4.1.8 | OCTET STRING | read-only | The peer IP address for the media stream of this call |
| INT accSignalGroupMediaUdpPort | 1.3.6.1.4.1.5.1.1.80.1.4.1.9 | INTEGER | read-only | The peer UDP port for the media stream of this call |
| INT accSignalGroupMediaSilSupr | 1.3.6.1.4.1.5.1.1.80.1.4.1.10 | INTEGER | read-only | The status of silence suppression for this call |
| INT accSignalGroupMediaDtmfSupr | 1.3.6.1.4.1.5.1.1.80.1.4.1.11 | INTEGER | read-only | The status of DTMF suppression for this call |
| INT accSignalGroupMediaXmitSupr | 1.3.6.1.4.1.5.1.1.80.1.4.1.12 | INTEGER | read-only | The status of receive suppression for this call |
| INT accSignalGroupMediaRecvSupr | 1.3.6.1.4.1.5.1.1.80.1.4.1.13 | INTEGER | read-only | The status of transmit suppression for this call |
| INT accSignalGroupMediaEchoSupr | 1.3.6.1.4.1.5.1.1.80.1.4.1.14 | INTEGER | read-only | The status of echo suppression for this call |
| accLineGroups | 1.3.6.1.4.1.5.1.1.80.2 | |||
| accLineGroupTable | 1.3.6.1.4.1.5.1.1.80.2.1 | not-accessible | Table of line groups | |
| accLineGroupEntry | 1.3.6.1.4.1.5.1.1.80.2.1.1 | not-accessible | An entry in the line group table | |
| INT accLineGroupIndex | 1.3.6.1.4.1.5.1.1.80.2.1.1.1 | INTEGER | read-only | Line group index |
| INT accLineGroupType | 1.3.6.1.4.1.5.1.1.80.2.1.1.2 | INTEGER | read-write | Line group type |
| INT accLineGroupEntryStatus | 1.3.6.1.4.1.5.1.1.80.2.1.1.3 | INTEGER | read-write | The modification status of this table entry |
| INT accLineGroupAdminStatus | 1.3.6.1.4.1.5.1.1.80.2.1.1.4 | INTEGER | read-write | The administrative status of this line group |
| INT accLineGroupOperStatus | 1.3.6.1.4.1.5.1.1.80.2.1.1.5 | INTEGER | read-only | The operational status of this line group |
| INT accLineGroupLineCount | 1.3.6.1.4.1.5.1.1.80.2.1.1.6 | INTEGER | read-write | The number of lines configured for this line group |
| INT accLineGroupBaseLic | 1.3.6.1.4.1.5.1.1.80.2.1.1.7 | INTEGER | read-write | The base line identification code for the lines in this line group |
| INT accLineGroupSignalGroup | 1.3.6.1.4.1.5.1.1.80.2.1.1.8 | INTEGER | read-write | The signal group to be used for signaling calls on this line group |
| INT accLineGroupCdnGroup | 1.3.6.1.4.1.5.1.1.80.2.1.1.9 | INTEGER | read-write | The called number group to be used for calls arriving on this line group |
| OCT accLineGroupIpAddress | 1.3.6.1.4.1.5.1.1.80.2.1.1.10 | OCTET STRING | read-write | The local IP address for lines on this line group |
| INT accLineGroupUdpPort | 1.3.6.1.4.1.5.1.1.80.2.1.1.11 | INTEGER | read-write | The base UDP port for lines on this line group |
| INT accLineGroupDefaultTos | 1.3.6.1.4.1.5.1.1.80.2.1.1.12 | INTEGER | read-write | The default type of service to use for media on this line group |
| INT accLineGroupMsgLevel | 1.3.6.1.4.1.5.1.1.80.2.1.1.13 | INTEGER | read-write | The debug message level for activity associated with this line group |
| CTR accLineGroupActiveLines | 1.3.6.1.4.1.5.1.1.80.2.1.1.14 | Counter | read-only | The number of lines which are busy with calls on this line group |
| INT accLineGroupLineStatus | 1.3.6.1.4.1.5.1.1.80.2.1.1.15 | INTEGER | read-only | The status of the line identification codes for lines on this line group |
| CTR accLineGroupAvailableLines | 1.3.6.1.4.1.5.1.1.80.2.1.1.16 | Counter | read-only | The number of lines available for new calls on this line group |
| accLineGroupMediaTable | 1.3.6.1.4.1.5.1.1.80.2.2 | not-accessible | The list of preferred media types to be used for calls on this a group | |
| accLineGroupMediaEntry | 1.3.6.1.4.1.5.1.1.80.2.2.1 | not-accessible | An entry in the line group media table | |
| INT accLineGroupMediaIndex | 1.3.6.1.4.1.5.1.1.80.2.2.1.1 | INTEGER | read-only | The line group that this entry in the media table refers to |
| INT accLineGroupMediaPreference | 1.3.6.1.4.1.5.1.1.80.2.2.1.2 | INTEGER | read-only | The preference number for this media type |
| INT accLineGroupMediaType | 1.3.6.1.4.1.5.1.1.80.2.2.1.3 | INTEGER | read-only | The type of media |
| INT accLineGroupMediaStatus | 1.3.6.1.4.1.5.1.1.80.2.2.1.4 | INTEGER | read-write | The modification status of this entry in the table |
| INT accLineGroupMediaCodecType | 1.3.6.1.4.1.5.1.1.80.2.2.1.5 | INTEGER | read-write | The codec type for this media preference |
| INT accLineGroupMediaPayldType | 1.3.6.1.4.1.5.1.1.80.2.2.1.6 | INTEGER | read-write | The payload type for this media preference |
| INT accLineGroupMediaPayldTos | 1.3.6.1.4.1.5.1.1.80.2.2.1.7 | INTEGER | read-write | The type of service for this media preference |
| accDmTraps | 1.3.6.1.4.1.5.1.1.80.3 | |||
| NTF accDmT7Trap | 1.3.6.1.4.1.5.1.1.80.3.0.1 | On receiving a CON message from AXE, stops T7, and forwards the connect indication to CM. This is indicated by this trap. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmT9Trap | 1.3.6.1.4.1.5.1.1.80.3.0.2 | On expiration of T9, sends REL message to AXE, Releases Conf. to CM, and starts T1 and T5. This is the communicated by this trap. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmT5Trap | 1.3.6.1.4.1.5.1.1.80.3.0.3 | On expiration of T5, stops T1, sends RSC to AXE. Sends Release Conf. to CM, sets call out of order. Starts T16 and T17. This is the sequence which causes this trap. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmT17Trap | 1.3.6.1.4.1.5.1.1.80.3.0.4 | On expiration of T17, stops T16, retransmits RSC, starts T17 and generates this trap. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmCmStaleCallCntxtTrap | 1.3.6.1.4.1.5.1.1.80.3.0.5 | This trap is generated indicating that CM has sent a stale call context. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmCallCicTrap | 1.3.6.1.4.1.5.1.1.80.3.0.6 | If the call received on a CIC whose state is Out of Service, then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmIamTrap | 1.3.6.1.4.1.5.1.1.80.3.0.7 | We have received an IAM on a CIC that is already processing a call, then it is ignored. The trap informs the same. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmInvMessTypeTrap | 1.3.6.1.4.1.5.1.1.80.3.0.8 | Invalid Message SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmIamToAxeTrap | 1.3.6.1.4.1.5.1.1.80.3.0.9 | Unable to send an IAM message to AXE SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmBCBAllocTrap | 1.3.6.1.4.1.5.1.1.80.3.0.10 | Can't allocate blocking control block due to memory shortage. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 32 | ||
| NTF accDmInvUbaTrap | 1.3.6.1.4.1.5.1.1.80.3.0.11 | Invalid UBA. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmCcbTrap | 1.3.6.1.4.1.5.1.1.80.3.0.12 | dl2_startTimer: CCB not present SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmBcbTrap | 1.3.6.1.4.1.5.1.1.80.3.0.13 | dl2_startTimer: BCB not present SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmInvTmrIdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.14 | dl2_startTimer: Invalid timer ID SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmStopTmrCCBTrap | 1.3.6.1.4.1.5.1.1.80.3.0.15 | dl2_stopTimer: CCB not present SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmStopTmrBCBTrap | 1.3.6.1.4.1.5.1.1.80.3.0.16 | dl2_stopTimer: BCB not present SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmInvStopTmrIdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.17 | dl2_stopTimer: Invalid TimerId SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmNonTestCallTrap | 1.3.6.1.4.1.5.1.1.80.3.0.18 | Non-Test Call Rejected SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmT13Trap | 1.3.6.1.4.1.5.1.1.80.3.0.19 | T13 Expired - Giving Up SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 166 | ||
| NTF accDmT15Trap | 1.3.6.1.4.1.5.1.1.80.3.0.20 | T15 Expired - Giving Up SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 166 | ||
| NTF accDmCbAllocTrap | 1.3.6.1.4.1.5.1.1.80.3.0.21 | Failed to allocate control block SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmMblkTrap | 1.3.6.1.4.1.5.1.1.80.3.0.22 | cant get mblk SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmFsmEvntTrap | 1.3.6.1.4.1.5.1.1.80.3.0.23 | Illegal FSM event SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmCicBaseRangeTrap | 1.3.6.1.4.1.5.1.1.80.3.0.24 | SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmDisblLineGrpTrap | 1.3.6.1.4.1.5.1.1.80.3.0.25 | Disable line group before deleting media preference entry SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmLGrpNmsModifyTrap | 1.3.6.1.4.1.5.1.1.80.3.0.26 | Disable line group before modifying media preference entry SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmLGrpLicRangeTrap | 1.3.6.1.4.1.5.1.1.80.3.0.27 | LIC range is not available SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmLGrpNoLinesTrap | 1.3.6.1.4.1.5.1.1.80.3.0.28 | Unable to activate line group : no lines assigned SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmLGrpDuplicatesTrap | 1.3.6.1.4.1.5.1.1.80.3.0.29 | Unable to activate line group : duplicate media entries SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 253 | ||
| NTF accDmLGrpNoSgrpTrap | 1.3.6.1.4.1.5.1.1.80.3.0.30 | Unable to activate line group : no signaling group SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmSGrpNmsDeleteTrap | 1.3.6.1.4.1.5.1.1.80.3.0.31 | Disable signaling group before deleting SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmSGrpNmsModifyTrap | 1.3.6.1.4.1.5.1.1.80.3.0.32 | Disable signaling group before modifying SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmSGrpEstablishedTrap | 1.3.6.1.4.1.5.1.1.80.3.0.33 | Signaling channel established SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmSGrpReleasedTrap | 1.3.6.1.4.1.5.1.1.80.3.0.34 | Signaling channel released SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmSGrpDrainTmoutTrap | 1.3.6.1.4.1.5.1.1.80.3.0.35 | Drain time-out, releasing signaling channel SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 166 | ||
| NTF accDmVdmStaleCmTrap | 1.3.6.1.4.1.5.1.1.80.3.0.36 | Stale call context from CM SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmVdmBadCmMsgTrap | 1.3.6.1.4.1.5.1.1.80.3.0.37 | Unexpected event in state SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmStaleDiaConTrap | 1.3.6.1.4.1.5.1.1.80.3.0.38 | Stale dial context for event SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmOutGngCallRfsdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.39 | Outgoing call refused SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmCallRfsdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.40 | Call refused (momentary resource shortage) SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmUnblRgstrTrap | 1.3.6.1.4.1.5.1.1.80.3.0.41 | Unable to register SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmMnyPSTNIFsTrap | 1.3.6.1.4.1.5.1.1.80.3.0.42 | Too many PSTN interfaces installed SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 43 | ||
| NTF accDmR2regInitTrap | 1.3.6.1.4.1.5.1.1.80.3.0.43 | Problem initializing r2reg fsm SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmDTMFInitTrap | 1.3.6.1.4.1.5.1.1.80.3.0.44 | Problem initializing DTMF reg fsm SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmCallCtxInit | 1.3.6.1.4.1.5.1.1.80.3.0.45 | Can't find callctx to init SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmPulDiaTrap | 1.3.6.1.4.1.5.1.1.80.3.0.46 | Pulse dialing outbound call addr info SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 0 | ||
| NTF accDmDSPDiaTrap | 1.3.6.1.4.1.5.1.1.80.3.0.47 | DSP dialing outbound call addr SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 0 | ||
| NTF accDmTestCallActvTrap | 1.3.6.1.4.1.5.1.1.80.3.0.48 | Test call already active on this port SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 4 | ||
| NTF accDmNoTestCallTrap | 1.3.6.1.4.1.5.1.1.80.3.0.49 | No test call to clear on this port SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmNoActvCallTrap | 1.3.6.1.4.1.5.1.1.80.3.0.50 | No active call on this endpoint SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmNoPdngCallTrap | 1.3.6.1.4.1.5.1.1.80.3.0.51 | No pending call to answer on this port SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmNoDiaParamTrap | 1.3.6.1.4.1.5.1.1.80.3.0.52 | No dial parameters for this endpoint SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 56 | ||
| NTF accDmISDNDiaInvdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.53 | ISDN dial procedure is invalid for this port SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmPSTNDiaInvldTrap | 1.3.6.1.4.1.5.1.1.80.3.0.54 | PSTN dial procedure is invalid for this port SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmTstngNotSpprtdTrap | 1.3.6.1.4.1.5.1.1.80.3.0.55 | Testing not supported for configured dial procedure SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmCmndSpprtNonISDNTrap | 1.3.6.1.4.1.5.1.1.80.3.0.56 | Command not supported for non-ISDN interfaces SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmNotValdFITTrap | 1.3.6.1.4.1.5.1.1.80.3.0.57 | This port is not a valid FIT endpoint SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 7 | ||
| NTF accDmResrcShortageTrap | 1.3.6.1.4.1.5.1.1.80.3.0.58 | Indicates that there is a resource shortage. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 43 | ||
| NTF accDmPrvntReinitPpIndTrap | 1.3.6.1.4.1.5.1.1.80.3.0.59 | LDSP has already been allocated for this call. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmLdspAllocTrap | 1.3.6.1.4.1.5.1.1.80.3.0.60 | LDSP alloc failed. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| NTF accDmRegFsmTrap | 1.3.6.1.4.1.5.1.1.80.3.0.61 | SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accDmTrapMsg } PCAUSE-DEFAULT: 46 | ||
| STR accDmTrapMsg | 1.3.6.1.4.1.5.1.1.80.3.1 | DisplayString | read-only | Enterprise Trap Message for Dm |
RFC description
Manages dial management including line groups and their administrative/operational status.
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.