TIMETRA-SAS-SERV-MIB

All MIBs › TIMETRA-SAS-SERV-MIB

Organization: Alcatel

Last Updated: 2009-07-07

Description: TIMETRA-SAS-SERV-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-SAS-SERV-MIB?

This is an Alcatel-Lucent (Nokia) proprietary MIB, part of the TIMETRA family, for managing and provisioning services on the Alcatel 7x50 SR (Service Router) system, with this particular module (SAS - Service Aggregation Switch) extending service access point (SAP) statistics. It exposes extended per-SAP statistics such as QoS classifier and meter usage counts, and ingress/egress forwarded and dropped packet/octet counters, including drops due to extra VLAN tags. Its monitoring value is centered on service-level performance and fault detection: tracking ingress/egress forwarded traffic versus dropped traffic (including tag-related drops) on a given SAP reveals whether a customer service is experiencing packet loss, QoS policy misconfiguration, or VLAN tagging mismatches. As a TIMETRA-family module it depends on and extends the base SAP statistics model shared across other Alcatel-Lucent 7x50 SR service MIBs. It is deployed on Alcatel-Lucent (Nokia) 7x50 Service Router systems delivering carrier Ethernet/aggregation services. Engineers can download the TIMETRA-SAS-SERV-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SAS-SERV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent (Nokia) 7x50 Service Router

Monitoring Examples

An administrator would poll sapBaseStatsExtnTable/sapBaseStatsExtnEntry to compare sapBaseStatsIngressForwardedPackets/Octets against sapBaseStatsIngressDroppedPackets/Octets for a given SAP, and check sapBaseStatsIngressExtraTagDroppedPackets to see if drops are specifically caused by unexpected VLAN tagging. A high ratio of dropped-to-forwarded packets combined with a high sapBaseStatsQosMetersUsed count would suggest the SAP's QoS policy is over-restrictive for the offered traffic load, prompting a review of its classifier/meter configuration.

What Can Be Monitored

ingress/egress forwarded packets and octets per SAP
ingress/egress dropped packets and octets per SAP
extra-tag dropped packets/octets
QoS classifiers and meters in use per SAP

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-SAP-MIB

sapBaseInfoEntry	OBJECT-TYPE
sapBaseStatsEntry	OBJECT-TYPE
sapEgrQosQueueStatsEntry	OBJECT-TYPE
sapEncapValue	OBJECT-TYPE
sapIngQosQueueInfoEntry	OBJECT-TYPE
sapIngQosQueueStatsEntry	OBJECT-TYPE
sapPortId	OBJECT-TYPE

From TIMETRA-SAS-GLOBAL-MIB

timetraSASConfs	OBJECT-IDENTITY
timetraSASModules	OBJECT-IDENTITY
timetraSASNotifyPrefix	OBJECT-IDENTITY
timetraSASObjs	OBJECT-IDENTITY

From TIMETRA-SAS-QOS-MIB

TIngressBurstSize
TIngressCIRRate
TIngressPIRRate
TMeterMode
TMeterRateMode

From TIMETRA-SERV-MIB

iesIfIndex	OBJECT-TYPE
svcBaseInfoEntry	OBJECT-TYPE
svcId	OBJECT-TYPE

From TIMETRA-TC-MIB

TAdaptationRule
TLevelOrDefault
TNamedItem
TSapIngressMeterId
TWeight
TmnxServId

How to Use in IPNetwork Monitor

Example using sapBaseStatsIngressForwardedPackets OID:

Select an Alcatel-Lucent (Nokia) 7x50 Service Router (extended SAP ingress/egress traffic/drop-counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sapBaseStatsIngressForwardedPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of sap ingress forwarded packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
TSA sapBaseInfoEgressAggShaperRateCIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.14	TSapAggShaperRateCIRsize	read-create	Aggregate shaper rate CIR value
TSA sapBaseInfoEgressAggShaperRatePIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.15	TSapAggShaperRatePIRsize	read-create	Aggregate shaper rate PIR value
T/F sapBaseInfoEgressStatsEnable	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.7	TruthValue	read-create	When set to 'true', egress sap stats is enabled
T/F sapBaseInfoEgressStatsPktsMode	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.1	TruthValue	read-create	When set to 'true', egress sap stats is enabled to collect in packets
T/F sapBaseInfoEthRingShgEnable	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.11	TruthValue	read-create	This command must only be used with the SAPs created in the service for the virtual channel on the interconnection nodes in a topology that uses multiple rings. This command creates a split-horizon group to ensure that Sub-Ring control messages from the major ring are only passed to the Sub-Ring control service.
sapBaseInfoExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1		not-accessible	Information about a specific SAP.
sapBaseInfoExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.2		not-accessible	sapBaseInfoExtnTable is an extension of sapBaseInfoTable
TSA sapBaseInfoIngressAggregateMeterBurst	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.4	TSapIngressAggrMeterBurstSize	read-create	The rate to be used in kbits. sapBaseInfoIngressAggregateMeterBurst can be set if 'tSapIngressMeterRateMode' is set to 'modified-trtcm'
INT sapBaseInfoIngressAggregateMeterRate	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.3	INTEGER	read-create	The rate to be used in kbps. The value -1 means maximum rate. sapBaseInfoIngressAggregateMeterRate can be set if 'tSapIngressMeterRateMode' is set to 'modified-trtcm'. When set to zero aggregate meter is disabled on sap Ingress
TSA sapBaseInfoIngressAggShaperRateCIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.12	TSapIngressAggShaperRateCIRsize	read-create	Aggregate shaper rate CIR value
TSA sapBaseInfoIngressAggShaperRatePIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.13	TSapIngressAggShaperRatePIRsize	read-create	Aggregate shaper rate PIR value
INT sapBaseInfoIngressCounterMode	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.2	INTEGER	read-create	When set to 'packet', Ingress sap stats collects in packets and when set to 'ocetet', Ingress sap stats collects in octets
INT sapBaseInfoIngressCounterType	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.9	INTEGER	read-create	When set to 'forward-drop-count', Ingress sap stats collects the forwarded and drop count, else in/out profile
T/F sapBaseInfoIngressExtraTagDropCount	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.6	TruthValue	read-create	When set to 'true', couting of extra tag dropped packet will be enabled, It will be set only for required SAP's
INT sapBaseInfoIngressFabricPath	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.10	INTEGER	read-create	Ingress sap Fabric path
T/F sapBaseInfoIngressStatsEnable	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.8	TruthValue	read-create	When set to 'true', ingress sap stats is enabled
T/F sapBaseInfoIngressWithAggregateMeter	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.5	TruthValue	read-create	When set to 'true', ingress aggregate policer can be configured on this sap. sapBaseInfoIngressNeedAggregateMeter can be enabled only during sap creation
C64 sapBaseStatsEgressForwardedOctets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.6	Counter64	read-only	The number of sap egress forwarded octets.
C64 sapBaseStatsEgressForwardedPackets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.5	Counter64	read-only	The number of sap egress forwarded packets.
sapBaseStatsExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1		not-accessible
sapBaseStatsExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.1		not-accessible	A table that contains ingress QoS SAP statistics.
C64 sapBaseStatsIngressDroppedOctets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.10	Counter64	read-only	The number of sap ingress dropped octets.
C64 sapBaseStatsIngressDroppedPackets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.9	Counter64	read-only	The number of sap ingress dropped packets.
C64 sapBaseStatsIngressExtraTagDroppedOctets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.8	Counter64	read-only	The number of Ingress Extra Tag Dropped octets
C64 sapBaseStatsIngressExtraTagDroppedPackets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.7	Counter64	read-only	The number of Ingress Extra Tag Dropped packets
C64 sapBaseStatsIngressForwardedOctets	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.4	Counter64	read-only	The number of sap ingress forwarded octets.
C64 sapBaseStatsIngressForwardedPacketsEx	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.3	Counter64	read-only	The number of sap ingress forwarded packets.
U32 sapBaseStatsQosClassifiersUsed	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.1	Unsigned32	read-only	This value indicates the number of ingress QoS classifiers used for this SAP.
U32 sapBaseStatsQosMetersUsed	1.3.6.1.4.1.6527.6.2.2.2.8.1.1.1.2	Unsigned32	read-only	This value indicates the number of ingress QoS meters used for this SAP.
I32 sapEgressAggRateLimitCIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.16	Integer32	read-write	The value of sapEgressAggRateLimitCIR in kbps is used to cap sap aggregate traffic cir rate.
I32 sapEgressAggRateLimitPIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.2.1.17	Integer32	read-write	The value of tmnxPortEtherNwAggRateLimit in kbps is used to cap sap aggregate traffic pir rate.
sapEgrQosQueueStatsExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1		not-accessible	Egress statistics about a specific SAP's QoS queue.
sapEgrQosQueueStatsExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.3		not-accessible	A table that contains egress QoS queue SAP statistics. This table extends the capabilities of sapEgrQosQueueStatsTable
C64 sapEgrQosQueueStatsFwdOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.2	Counter64	read-only	The number of forwarded bytes on this egress Queue.
C64 sapEgrQosQueueStatsFwdPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.1	Counter64	read-only	The number of forwarded packets on this egress Queue.
C64 sapEgrQosQueueStatsInprofDroOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.4	Counter64	read-only	The number of dropped bytes for this in profile egress Queue.
C64 sapEgrQosQueueStatsInprofDroPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.3	Counter64	read-only	The number of dropped packets for this in profile egress Queue.
C64 sapEgrQosQueueStatsOutprofDroOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.6	Counter64	read-only	The number of dropped bytes for this out profile egress Queue.
C64 sapEgrQosQueueStatsOutprofDroPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.3.1.5	Counter64	read-only	The number of dropped packets for this out profile egress Queue.
TIN sapIngQosMeterAdminCBS	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.5	TIngressBurstSize	read-create	The value of sapIngQosMeterCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.
TIN sapIngQosMeterAdminCIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.10	TIngressCIRRate	read-create	The value of sapIngQosMeterAdminCIR specifies the desired CIR value for this queue.
TIN sapIngQosMeterAdminMBS	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.6	TIngressBurstSize	read-create	The value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.
TIN sapIngQosMeterAdminPIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.9	TIngressPIRRate	read-create	The value of sapIngQosMeterAdminPIR specifies the desired PIR value for this Meter.
TAD sapIngQosMeterCIRAdaptation	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.7	TAdaptationRule	read-create	The value of sapIngQosMeterCIRAdaptation specifies the criteria to use to compute the operational CIR value for this Meter, while maintaining a minimum offset.
sapIngQosMeterInfoEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1		not-accessible	Override values for the specified SAP ingress QoS Meter. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
sapIngQosMeterInfoTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.5		not-accessible	This table is used to override the base parameters of a Meter, as defined in the associated SAP ingress QoS policy.
TIM sapIngQosMeterLastMgmtChange	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.3	TimeStamp	read-only	The value of sapIngQosMeterLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.
TIN sapIngQosMeterOperCIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.13	TIngressCIRRate	read-only	The value of sapIngQosMeterOperCIR returns the operational CIR value for this queue.
TIN sapIngQosMeterOperPIR	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.12	TIngressPIRRate	read-only	The value of sapIngQosMeterOperPIR returns the operational PIR value for this Meter.
TQO sapIngQosMeterOverrideFlags	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.4	TQosMeterAttribute	read-create	The value of sapIngQosMeterOverrideFlags specifies the set of attributes whose values have been overridden via management on this Meter. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.
TSA sapIngQosMeterOvId	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.1	TSapIngressMeterId	not-accessible	The value of sapIngQosMeterOvId indicates the ID of the Meter whose parameters are to be overridden.
TAD sapIngQosMeterPIRAdaptation	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.8	TAdaptationRule	read-create	The value of sapIngQosMeterPIRAdaptation specifies the criteria to use to compute the operational PIR value for this Meter, while maintaining a minimum offset.
INT sapIngQosMeterRateColorMode	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.14	INTEGER	read-create	Set sap meter color mode
TME sapIngQosMeterRateMode	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.11	TMeterRateMode	read-create	Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime.
ROW sapIngQosMeterRowStatus	1.3.6.1.4.1.6527.6.2.2.2.8.1.5.1.2	RowStatus	read-create	The value of sapIngQosMeterRowStatus controls the creation and deletion of rows in this table.
TLE sapIngQosQCIRLevel	1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.3	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this override queue as for the above CIR traffic.
TWE sapIngQosQPIRWeight	1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.2	TWeight	read-create	The weight that needs to be used by the scheduler to which this override queue would be feeding to.
TNA sapIngQosQPolicyName	1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1.1	TNamedItem	read-create	sapIngQosQPolicyName determines the queue management policy attached to this SAP Ingress queue.
sapIngQosQueueInfoExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.6.1		not-accessible	Override values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
sapIngQosQueueInfoExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.6		not-accessible	This table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy.
sapIngQosQueueStatsExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1		not-accessible	Ingress statistics about a specific SAP's QoS queue.
sapIngQosQueueStatsExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.1.4		not-accessible	A table that contains ingress QoS queue SAP statistics. This table extends the capabilities of sapIngQosQueueStatsTable
C64 sapIngQosQueueStatsFwdOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.2	Counter64	read-only	The number of forwarded bytes on this ingress Queue.
C64 sapIngQosQueueStatsFwdPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.1	Counter64	read-only	The number of forwarded packets on this ingress Queue.
C64 sapIngQosQueueStatsInprofDroOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.4	Counter64	read-only	The number of dropped bytes for this in profile ingress Queue.
C64 sapIngQosQueueStatsInprofDroPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.3	Counter64	read-only	The number of dropped packets for this in profile ingress Queue.
C64 sapIngQosQueueStatsOutprofDroOcts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.6	Counter64	read-only	The number of dropped bytes for this out profile ingress Queue.
C64 sapIngQosQueueStatsOutprofDroPkts	1.3.6.1.4.1.6527.6.2.2.2.8.1.4.1.5	Counter64	read-only	The number of dropped packets for this out profile ingress Queue.
INT svcAllowL2ptXstpBpdu	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.6	INTEGER	read-create	The value of this particular object indicates that whether this service allows l2pt xstp bpdu
svcBaseInfoExtnEntry	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1		not-accessible	Information about a specific service.
svcBaseInfoExtnTable	1.3.6.1.4.1.6527.6.2.2.2.8.2.1		not-accessible	svcBaseInfoExtnTable is an extension of svcBaseInfoTable
INT svcbVplsVid	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.7	INTEGER	read-create	The value of svcbVplsVid specifies the b-vid for b-vpls and it is a mandatory parameter when creating a b-vpls service.
INT svcCustomerVid	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.4	INTEGER	read-create	The value of svcCustomerVid specifies the encap value when svcSapType is dot1q-preserve. The sapEncapValue of Dot1q SAPs in the service should match this svcCustomerVid. The qtag2 of sapEncapValue of QinQ SAPs in the service should match this svcCustomerVid.
INT svcEpipeType	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.5	INTEGER	read-create	The value of this particular object indicates that a 'pbb-epipe' service is to be created
TMN svcIesId	1.3.6.1.4.1.6527.6.2.2.2.8.4.2	TmnxServId	accessible-for-notify	The value of the object svcIesId is the ies service id to which vpls service is bound after ip interface binding is enabled on a IES IP interface.
T/F svcMtuCheck	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.1	TruthValue	read-create	This `no` form of this command disables the service MTU checks. When the check is disabled the system will pass on packets to the egress as long as the packet length is lesser than or equal to the configured port MTU. In other words, the length of the packet sent out of a SAP is limited by the access port MTU and the length of the packet sent out of a PW is limited by the network port MTU (minus the MPLS encapsulation). When set to 'false', the configured svcMtu value is not enforced
INT svcSapType	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.2	INTEGER	read-create	The value of svcSapType specifies the type of saps configured in the service. If svcSapType is null-star the allowed access saps are null & star and Network sap is Q.. If svcSapType is dot1q the allowed access saps is dot1q and Network sap are Q.. If svcSapType is dot1q-preserve the allowed access saps is dot1q and Network sap is QinQ. If svcSapType is any the allowed access saps are null, dot1q, dot1q explicit null, star and Network sap is Q.. If svcSapType is dot1q-range, the allowed saps are dot1q-range saps and Q.
INT svcUplinkType	1.3.6.1.4.1.6527.6.2.2.2.8.2.1.1.3	INTEGER	read-create	The value of svcUplinkType specifies the uplink type of the service. If uplink type is L2 the network SAPs can be Q.* and QinQ. If uplink type is MPLS the network SAPs can be spoke SDPs.
TMN svcVplsId	1.3.6.1.4.1.6527.6.2.2.2.8.4.1	TmnxServId	accessible-for-notify	The value of the object svcVplsId is the vpls service id bound to IES interface after ip interface binding is enabled on IES IP interface.
NTF svcVplssvcBoundToIESSvc	1.3.6.1.4.1.6527.6.2.2.2.8.3.1			The svcVplssvcBoundToIESSvc notification is generated when vpls service is bound to IES interface. The ip interface binding must be enabled before the IES IP interface is bound to the VPLS service
timetraSASServicesMIBModule	1.3.6.1.4.1.6527.6.2.1.1.9			This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxSap72100V1v0Compliance	1.3.6.1.4.1.6527.6.2.2.1.5.1.1.1			The compliance statement for management of services SAPs on Alcatel 7210 SAS series systems.
tmnxSapGlobalV1v0Group	1.3.6.1.4.1.6527.6.2.2.1.5.1.2.28			The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
tmnxSapGlobalV3v0Group	1.3.6.1.4.1.6527.6.2.2.1.5.1.2.30			The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
tmnxSapGlobalV4v0Group	1.3.6.1.4.1.6527.6.2.2.1.5.1.2.31			The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
tmnxSapGlobalV5v0Group	1.3.6.1.4.1.6527.6.2.2.1.5.1.2.32			The group of objects supporting management of Services SAP general capabilities on Alcatel 7210 series systems.
tmnxSASSapCompliances	1.3.6.1.4.1.6527.6.2.2.1.5.1.1
tmnxSASSapConformance	1.3.6.1.4.1.6527.6.2.2.1.5.1
tmnxSASSapGroups	1.3.6.1.4.1.6527.6.2.2.1.5.1.2
tmnxSASSapObjs	1.3.6.1.4.1.6527.6.2.2.2.8.1
tmnxSasSapQosV2v0Group	1.3.6.1.4.1.6527.6.2.2.1.5.1.2.29			The group of objects supporting the management of Qos capabilities on Alcatel 7210 series systems.
tmnxSASServConformance	1.3.6.1.4.1.6527.6.2.2.1.5
tmnxSASServGroups	1.3.6.1.4.1.6527.6.2.2.1.5.2
tmnxSASServObjs	1.3.6.1.4.1.6527.6.2.2.2.8
tmnxSASSvcNotifyGroup	1.3.6.1.4.1.6527.6.2.2.1.5.2.1			The group of notifications for the services feature on Alcatel-Lucent 7210 series systems.
tmnxSASSvcNotifyObjs	1.3.6.1.4.1.6527.6.2.2.2.8.4
tmnxSASSvcObjs	1.3.6.1.4.1.6527.6.2.2.2.8.2
tmnxSASSvcTraps	1.3.6.1.4.1.6527.6.2.2.2.8.3

RFC description

Vendor-private MIB for Alcatel-Lucent/Nokia 7210 SAS service management and provisioning.

Start monitoring Alcatel-Lucent (Nokia) 7x50 Service Router (extended SAP ingress/egress traffic/drop-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-SAS-SERV-MIB