DES3200ME-28-L3MGMT-MIB

All MIBs › DES3200ME-28-L3MGMT-MIB

Organization: D-Link, Inc.

Last Updated: 2009-11-07

Description: Layer 3 management MIB for D-Link DES-3200ME-28 metro Ethernet switch covering IPv4/IPv6 interface configuration, DHCP option 12, and IPv6 link-local addressing

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DES3200ME-28-L3MGMT-MIB?

DES3200ME-28-L3MGMT-MIB is a D-Link proprietary MIB for the DES-3200ME-28 metro Ethernet switch that models Layer 3 IP interface management, including IPv4/IPv6 addressing and DHCP client behavior. Its swL3IpCtrlTable exposes per-interface objects such as swL3IpCtrlIpv6LinkLocalAddress/PrefixLen and the auto-configuration state of the IPv6 link-local address (swL3IpCtrlIpv6LinkLocalAutoState), plus DHCP option 12 host-name insertion controls (swL3IpCtrlIpDhcpOption12State, swL3IpCtrlIpDhcpOption12HostName). The swL3Ipv6CtrlTable reports IPv6-specific interface parameters (swL3Ipv6CtrlMaxReassmblySize, swL3Ipv6CtrlNsRetransTimer), while swL3Ipv6AddressCtrlTable tracks individual IPv6 addresses assigned to an interface along with their prefix length and RowStatus lifecycle state, and swL3IpCtrlAllIpIfState provides a global enable/disable switch for all IP interface functions. Monitoring this MIB is useful for confirming IPv6 link-local addressing came up correctly and that DHCP option 12 host-name identification is configured as expected on a Layer 3 metro switch. It depends on the SWPRIMGMT-DES3200-MIB enterprise registration tree for its OID root and is deployed specifically on D-Link DES-3200ME-28 metro Ethernet switches performing Layer 3 routing/management functions; administrators searching for the DES3200ME-28-L3MGMT-MIB download will find the object definitions for these interfaces to load into their SNMP tooling.

IPNetwork Monitor allows you to monitor SNMP objects defined in DES3200ME-28-L3MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-3200ME-28 managed switch

Monitoring Examples

An operator polls swL3IpCtrlIpv6LinkLocalAddress and swL3IpCtrlIpv6LinkLocalPrefixLen for a management interface to confirm the auto-generated IPv6 link-local address is present, and checks swL3Ipv6AddressCtrlState (RowStatus) for a statically configured IPv6 address entry; an inactive RowStatus or a missing link-local address would indicate the IPv6 interface failed to initialize.

What Can Be Monitored

IPv6 link-local address and prefix length per interface
IPv6 link-local auto-configuration state
DHCP option 12 host-name insertion settings
IPv6 address table row status per interface
IPv6 max reassembly size and neighbor-solicitation retransmit timer
global IP interface enable/disable state

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From SWPRIMGMT-DES3200-MIB

dlink-des3200me-28Prod

OIDs

OID symbolic	OID numeric	Type	Access	Description
swL3MgmtMIB	1.3.6.1.4.1.171.10.113.1.6.3			The Structure of Layer 3 Network Management Information for enterprise.
swL3DevMgmt	1.3.6.1.4.1.171.10.113.1.6.3.1
swL3IpMgmt	1.3.6.1.4.1.171.10.113.1.6.3.2
swL3IpCtrlMgmt	1.3.6.1.4.1.171.10.113.1.6.3.2.1
swL3IpCtrlTable	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3		not-accessible	This table contains IP interface information.
swL3IpCtrlEntry	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1		not-accessible	A list of information about a specific IP interface.
STR swL3IpCtrlInterfaceName	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3IpCtrlIpv6LinkLocalAddress	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.14	Ipv6Address	read-only	The IPv6 link local address for this interface.
INT swL3IpCtrlIpv6LinkLocalPrefixLen	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.15	INTEGER	read-only	The IPv6 prefix length for this IPv6 link local address.
INT swL3IpCtrlIpv6LinkLocalAutoState	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.17	INTEGER	read-write	The state of the IPv6 link local auto.
INT swL3IpCtrlIpDhcpOption12State	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.22	INTEGER	read-write	Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.
STR swL3IpCtrlIpDhcpOption12HostName	1.3.6.1.4.1.171.10.113.1.6.3.2.1.3.1.23	DisplayString	read-write	Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
swL3Ipv6CtrlTable	1.3.6.1.4.1.171.10.113.1.6.3.2.1.4		not-accessible	This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry	1.3.6.1.4.1.171.10.113.1.6.3.2.1.4.1		not-accessible	A list of IPv6 information about a specific IP interface.
STR swL3Ipv6CtrlInterfaceName	1.3.6.1.4.1.171.10.113.1.6.3.2.1.4.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
INT swL3Ipv6CtrlMaxReassmblySize	1.3.6.1.4.1.171.10.113.1.6.3.2.1.4.1.2	INTEGER	read-only	Maximum Reassembly Size of the IP interface.
U32 swL3Ipv6CtrlNsRetransTimer	1.3.6.1.4.1.171.10.113.1.6.3.2.1.4.1.3	Unsigned32	read-write	Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
swL3Ipv6AddressCtrlTable	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5		not-accessible	This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5.1		not-accessible	A list of information about a specific IPv6 address.
STR swL3Ipv6AddressCtrlInterfaceName	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3Ipv6Address	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5.1.2	Ipv6Address	read-only	Specify the IPv6 address.
INT swL3Ipv6AddressCtrlPrefixLen	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5.1.3	INTEGER	read-only	Indicates the prefix length of this IPv6 address.
ROW swL3Ipv6AddressCtrlState	1.3.6.1.4.1.171.10.113.1.6.3.2.1.5.1.8	RowStatus	read-create	This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
INT swL3IpCtrlAllIpIfState	1.3.6.1.4.1.171.10.113.1.6.3.2.1.7	INTEGER	read-write	This object indicates all interface function state of the device.

RFC description

Manages Layer 3 network configuration for D-Link DES3200ME switches, including IPv4 and IPv6 interface settings.

Start monitoring D-Link DES-3200ME switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DES3200ME-28-L3MGMT-MIB

What Is DES3200ME-28-L3MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description