Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

All MIBs › Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

Category: Nortel MsCarrier MscPassport

Description:

Defines SNMP objects for logical processor resource allocation and scheduling on Nortel MsCarrier MscPassport switches.

Imported Objects

From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
InterfaceIndex
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-MsCarrier-MscPassport-TextualConventionsMIB

AsciiString
EnterpriseDateAndTime
Hex
Link
NonReplicated
PassportCounter64

From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

mscComponents	OBJECT-IDENTITY
mscPassportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

What Is Nortel-MsCarrier-MscPassport-LogicalProcessorMIB?

This Nortel MsCarrier MscPassport MIB defines SNMP objects for logical processor (LP) resource allocation and card-level redundancy on the Passport switch, covering how processing capacity is assigned across main and spare processor cards. Engineers often load this module into a MIB Browser first to inspect the mscLpProvTable structure before configuring automated redundancy polling. It exposes provisioning tables identifying the main card and spare card assigned to a logical processor, the logical processor type, and DS3-related associations, using the standard row-status/component provisioning pattern. This MIB directly supports hardware status monitoring: tracking whether a logical processor's main card is healthy and whether a spare card is available for failover is central to assessing the switch's processing redundancy and resiliency posture. It is layered on Nortel's proprietary Passport shelf/card hardware model rather than any external standard. It is used in carrier deployments of Nortel Passport switches where processing load is distributed across multiple cards and redundancy (main/spare) is critical to service continuity.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-LogicalProcessorMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

main processor card assignment
spare processor card assignment
logical processor type
logical processor row status

Supported Devices

Nortel MsCarrier MscPassport switch (processor/shelf cards)

Monitoring Examples

An operator would poll mscLpProvTable/mscLpProvEntry to see the mscLpMainCard and mscLpSpareCard assignments for a given mscLpLogicalProcessorType, confirming that a redundant spare card is properly provisioned in case the main card fails. Checking mscLpRowStatus confirms the logical processor component itself is active, and mscLpDS3 associations would be reviewed when the logical processor is tied to DS3 trunk interfaces. If a main card fails and no spare is provisioned or active, this table is where an operator would discover the redundancy gap.

OIDs

OID symbolic	OID numeric	Type	Access	Description
logicalProcessorCapabilities	1.3.6.1.4.1.562.36.2.2.11.3
logicalProcessorCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.11.3.1
logicalProcessorCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.11.3.1.3
logicalProcessorCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.11.3.1.3.2
logicalProcessorGroup	1.3.6.1.4.1.562.36.2.2.11.1
logicalProcessorGroupCA	1.3.6.1.4.1.562.36.2.2.11.1.1
logicalProcessorGroupCA02	1.3.6.1.4.1.562.36.2.2.11.1.1.3
logicalProcessorGroupCA02A	1.3.6.1.4.1.562.36.2.2.11.1.1.3.2
logicalProcessorMIB	1.3.6.1.4.1.562.36.2.2.11
mscLp	1.3.6.1.4.1.562.36.2.1.12
NUM mscLpActiveCard	1.3.6.1.4.1.562.36.2.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
INT mscLpAdminState	1.3.6.1.4.1.562.36.2.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpCapEntry	1.3.6.1.4.1.562.36.2.1.12.105.1		not-accessible	An entry in the mscLpCapTable.
mscLpCapTable	1.3.6.1.4.1.562.36.2.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
mscLpCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.101.1		not-accessible	An entry in the mscLpCidDataTable.
mscLpCidDataTable	1.3.6.1.4.1.562.36.2.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpComponentName	1.3.6.1.4.1.562.36.2.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpControlStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
G32 mscLpCpuUtil	1.3.6.1.4.1.562.36.2.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 mscLpCpuUtilAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
U32 mscLpCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS1	1.3.6.1.4.1.562.36.2.1.12.7
mscLpDS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.12.1		not-accessible	An entry in the mscLpDS1AdminInfoTable.
mscLpDS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpDS1AdminState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
mscLpDS1Audio	1.3.6.1.4.1.562.36.2.1.12.7.5
STR mscLpDS1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON mscLpDS1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Audio tables.
ROW mscLpDS1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Audio components. These components cannot be added nor deleted.
mscLpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Audio component.
mscLpDS1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Audio components.
STO mscLpDS1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Audio tables.
OCT mscLpDS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 mscLpDS1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
mscLpDS1Chan	1.3.6.1.4.1.562.36.2.1.12.7.2
G32 mscLpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1		not-accessible	An entry in the mscLpDS1ChanAdminInfoTable.
mscLpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpDS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT mscLpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpDS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.7.2.3
U32 mscLpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpDS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpDS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanCell tables.
INT mscLpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1		not-accessible	An entry in the mscLpDS1ChanCellOperTable.
mscLpDS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1		not-accessible	An entry in the mscLpDS1ChanCellProvTable.
mscLpDS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpDS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanCell components. These components can be added and deleted.
mscLpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanCell component.
mscLpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanCell components.
INT mscLpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1		not-accessible	An entry in the mscLpDS1ChanCellStatsTable.
mscLpDS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanCell tables.
G32 mscLpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpDS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1		not-accessible	An entry in the mscLpDS1ChanCidDataTable.
mscLpDS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpDS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpDS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
INT mscLpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1		not-accessible	An entry in the mscLpDS1ChanIfEntryTable.
mscLpDS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpDS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpDS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1Chan tables.
INT mscLpDS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpDS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1		not-accessible	An entry in the mscLpDS1ChanOperTable.
mscLpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1		not-accessible	An entry in the mscLpDS1ChanOperStatusTable.
mscLpDS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT mscLpDS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpDS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1		not-accessible	An entry in the mscLpDS1ChanProvTable.
mscLpDS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW mscLpDS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1Chan components. These components can be added and deleted.
mscLpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Chan component.
mscLpDS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Chan components.
INT mscLpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpDS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1		not-accessible	An entry in the mscLpDS1ChanStateTable.
mscLpDS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Chan tables.
mscLpDS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.7.2.4
STR mscLpDS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON mscLpDS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTc tables.
INT mscLpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
mscLpDS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1		not-accessible	An entry in the mscLpDS1ChanTcOpTable.
mscLpDS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1		not-accessible	An entry in the mscLpDS1ChanTcProvTable.
mscLpDS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX mscLpDS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW mscLpDS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanTc components. These components can be added and deleted.
mscLpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTc component.
mscLpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTc components.
U32 mscLpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1		not-accessible	An entry in the mscLpDS1ChanTcSigOneTable.
INT mscLpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigOneTable specific index for the mscLpDS1ChanTcSigOneTable.
mscLpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigOneTable.
mscLpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1		not-accessible	An entry in the mscLpDS1ChanTcSigTwoTable.
INT mscLpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigTwoTable specific index for the mscLpDS1ChanTcSigTwoTable.
mscLpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigTwoTable.
STO mscLpDS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTc tables.
mscLpDS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.7.2.2
INT mscLpDS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpDS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpDS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpDS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpDS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpDS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpDS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTest tables.
INT mscLpDS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpDS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1		not-accessible	An entry in the mscLpDS1ChanTestResultsTable.
mscLpDS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpDS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1ChanTest components. These components cannot be added nor deleted.
mscLpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTest component.
mscLpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTest components.
mscLpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1		not-accessible	An entry in the mscLpDS1ChanTestSetupTable.
mscLpDS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1		not-accessible	An entry in the mscLpDS1ChanTestStateTable.
mscLpDS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTest tables.
U32 mscLpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT mscLpDS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpDS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpDS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpDS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.11.1		not-accessible	An entry in the mscLpDS1CidDataTable.
mscLpDS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpDS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pDS1Atm card, which it defaults to local. On a 3pDS1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4DS1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
STR mscLpDS1CommentText	1.3.6.1.4.1.562.36.2.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpDS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 mscLpDS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
U32 mscLpDS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS1Dsp	1.3.6.1.4.1.562.36.2.1.12.7.4
STR mscLpDS1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON mscLpDS1DspIndex	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Dsp tables.
ROW mscLpDS1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Dsp components. These components cannot be added nor deleted.
mscLpDS1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Dsp component.
mscLpDS1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Dsp components.
STO mscLpDS1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Dsp tables.
C32 mscLpDS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpDS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
INT mscLpDS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpDS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.13.1		not-accessible	An entry in the mscLpDS1IfEntryTable.
mscLpDS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpDS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpDS1Index	1.3.6.1.4.1.562.36.2.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1 tables.
U32 mscLpDS1LineLength	1.3.6.1.4.1.562.36.2.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
INT mscLpDS1LineType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT mscLpDS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
C32 mscLpDS1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
INT mscLpDS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpDS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.7.16.1		not-accessible	An entry in the mscLpDS1OperTable.
mscLpDS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.14.1		not-accessible	An entry in the mscLpDS1OperStatusTable.
mscLpDS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1OperTable	1.3.6.1.4.1.562.36.2.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT mscLpDS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpDS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.10.1		not-accessible	An entry in the mscLpDS1ProvTable.
mscLpDS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
INT mscLpDS1RaiAlarmType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
ROW mscLpDS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1 components. These components can be added and deleted.
mscLpDS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.1.1		not-accessible	A single entry in the table represents a single mscLpDS1 component.
mscLpDS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.1		not-accessible	This entry controls the addition and deletion of mscLpDS1 components.
C32 mscLpDS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
INT mscLpDS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
C32 mscLpDS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
INT mscLpDS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpDS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.7.15.1		not-accessible	An entry in the mscLpDS1StateTable.
mscLpDS1StateTable	1.3.6.1.4.1.562.36.2.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.17.1		not-accessible	An entry in the mscLpDS1StatsTable.
mscLpDS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO mscLpDS1StorageType	1.3.6.1.4.1.562.36.2.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1 tables.
mscLpDS1Test	1.3.6.1.4.1.562.36.2.1.12.7.3
INT mscLpDS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpDS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpDS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpDS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpDS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpDS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpDS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpDS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpDS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpDS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpDS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpDS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpDS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Test tables.
INT mscLpDS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpDS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpDS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1		not-accessible	An entry in the mscLpDS1TestResultsTable.
mscLpDS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpDS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Test components. These components cannot be added nor deleted.
mscLpDS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Test component.
mscLpDS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Test components.
mscLpDS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1		not-accessible	An entry in the mscLpDS1TestSetupTable.
mscLpDS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1		not-accessible	An entry in the mscLpDS1TestStateTable.
mscLpDS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Test tables.
U32 mscLpDS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS1TestType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpDS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
C32 mscLpDS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT mscLpDS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS1UsageState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpDS1Vendor	1.3.6.1.4.1.562.36.2.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
INT mscLpDS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
mscLpDS3	1.3.6.1.4.1.562.36.2.1.12.5
mscLpDS3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.12.1		not-accessible	An entry in the mscLpDS3AdminInfoTable.
mscLpDS3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpDS3AdminState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpDS3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
OCT mscLpDS3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpDS3CBit	1.3.6.1.4.1.562.36.2.1.12.5.3
C32 mscLpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 mscLpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
STR mscLpDS3CBitComponentName	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
C32 mscLpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 mscLpDS3CBitFarEndFailures	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 mscLpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
NON mscLpDS3CBitIndex	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3CBit tables.
OCT mscLpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT mscLpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
mscLpDS3CBitOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1		not-accessible	An entry in the mscLpDS3CBitOperationalTable.
mscLpDS3CBitOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
INT mscLpDS3CbitParity	1.3.6.1.4.1.562.36.2.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
ROW mscLpDS3CBitRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3CBit components. These components cannot be added nor deleted.
mscLpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3CBit component.
mscLpDS3CBitRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3CBit components.
mscLpDS3CBitStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1		not-accessible	An entry in the mscLpDS3CBitStatsTable.
mscLpDS3CBitStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS3CBitStorageType	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3CBit tables.
mscLpDS3Cell	1.3.6.1.4.1.562.36.2.1.12.5.5
U32 mscLpDS3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpDS3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpDS3CellIndex	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Cell tables.
INT mscLpDS3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1		not-accessible	An entry in the mscLpDS3CellOperTable.
mscLpDS3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1		not-accessible	An entry in the mscLpDS3CellProvTable.
mscLpDS3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpDS3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3Cell components. These components can be added and deleted.
mscLpDS3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Cell component.
mscLpDS3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Cell components.
INT mscLpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpDS3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpDS3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1		not-accessible	An entry in the mscLpDS3CellStatsTable.
mscLpDS3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Cell tables.
G32 mscLpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpDS3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.11.1		not-accessible	An entry in the mscLpDS3CidDataTable.
mscLpDS3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpDS3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. If there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
STR mscLpDS3CommentText	1.3.6.1.4.1.562.36.2.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpDS3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpDS3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS3DS1	1.3.6.1.4.1.562.36.2.1.12.5.6
mscLpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1		not-accessible	An entry in the mscLpDS3DS1AdminInfoTable.
mscLpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpDS3DS1AdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3DS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpDS3DS1Chan	1.3.6.1.4.1.562.36.2.1.12.5.6.2
G32 mscLpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1		not-accessible	An entry in the mscLpDS3DS1ChanAdminInfoTable.
mscLpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpDS3DS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT mscLpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpDS3DS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3
U32 mscLpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanCell tables.
INT mscLpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCellOperTable.
mscLpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1		not-accessible	An entry in the mscLpDS3DS1ChanCellProvTable.
mscLpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanCell components. These components can be added and deleted.
mscLpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanCell component.
mscLpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanCell components.
INT mscLpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1		not-accessible	An entry in the mscLpDS3DS1ChanCellStatsTable.
mscLpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanCell tables.
G32 mscLpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCidDataTable.
mscLpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpDS3DS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3DS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
INT mscLpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanIfEntryTable.
mscLpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpDS3DS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1Chan tables.
INT mscLpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1		not-accessible	An entry in the mscLpDS3DS1ChanOperTable.
mscLpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1		not-accessible	An entry in the mscLpDS3DS1ChanOperStatusTable.
mscLpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT mscLpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanProvTable.
mscLpDS3DS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW mscLpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1Chan components. These components can be added and deleted.
mscLpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Chan component.
mscLpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Chan components.
INT mscLpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1		not-accessible	An entry in the mscLpDS3DS1ChanStateTable.
mscLpDS3DS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS3DS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Chan tables.
mscLpDS3DS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4
STR mscLpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON mscLpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTc tables.
INT mscLpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
mscLpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTcOpTable.
mscLpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTcProvTable.
mscLpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX mscLpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW mscLpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTc components. These components can be added and deleted.
mscLpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTc component.
mscLpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTc components.
U32 mscLpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigOneTable.
INT mscLpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigOneTable specific index for the mscLpDS3DS1ChanTcSigOneTable.
mscLpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigOneTable.
mscLpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigTwoTable.
INT mscLpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigTwoTable specific index for the mscLpDS3DS1ChanTcSigTwoTable.
mscLpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigTwoTable.
STO mscLpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTc tables.
mscLpDS3DS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2
INT mscLpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTest tables.
INT mscLpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanTestResultsTable.
mscLpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTest components. These components cannot be added nor deleted.
mscLpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTest component.
mscLpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTest components.
mscLpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTestSetupTable.
mscLpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTestStateTable.
mscLpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTest tables.
U32 mscLpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3DS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT mscLpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3DS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpDS3DS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpDS3DS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1		not-accessible	An entry in the mscLpDS3DS1CidDataTable.
mscLpDS3DS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpDS3DS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal or 4pDS3ChAtm card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local. On a 4pDS3ChAtm card the clocking source for all DS1 and all DS3 components on card must be the same, except when a DS1 is using line as a clocking source.
STR mscLpDS3DS1CommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3DS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpDS3DS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 mscLpDS3DS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
U32 mscLpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpDS3DS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 mscLpDS3DS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
INT mscLpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1		not-accessible	An entry in the mscLpDS3DS1IfEntryTable.
mscLpDS3DS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpDS3DS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpDS3DS1Index	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1 tables.
INT mscLpDS3DS1LineType	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. For the 4pDS3ChAtm card, only d4 and esf framing patterns are permitted.
INT mscLpDS3DS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpDS3DS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1		not-accessible	An entry in the mscLpDS3DS1OperTable.
mscLpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1		not-accessible	An entry in the mscLpDS3DS1OperStatusTable.
mscLpDS3DS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1OperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT mscLpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpDS3DS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1		not-accessible	An entry in the mscLpDS3DS1ProvTable.
mscLpDS3DS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
ROW mscLpDS3DS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1 components. These components can be added and deleted.
mscLpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1 component.
mscLpDS3DS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1 components.
C32 mscLpDS3DS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
INT mscLpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
C32 mscLpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS3DS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS3DS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
INT mscLpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpDS3DS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1		not-accessible	An entry in the mscLpDS3DS1StateTable.
mscLpDS3DS1StateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1		not-accessible	An entry in the mscLpDS3DS1StatsTable.
mscLpDS3DS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO mscLpDS3DS1StorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1 tables.
mscLpDS3DS1Test	1.3.6.1.4.1.562.36.2.1.12.5.6.3
INT mscLpDS3DS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpDS3DS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpDS3DS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpDS3DS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpDS3DS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpDS3DS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpDS3DS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1Test tables.
INT mscLpDS3DS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpDS3DS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1		not-accessible	An entry in the mscLpDS3DS1TestResultsTable.
mscLpDS3DS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpDS3DS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1Test components. These components cannot be added nor deleted.
mscLpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Test component.
mscLpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Test components.
mscLpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1		not-accessible	An entry in the mscLpDS3DS1TestSetupTable.
mscLpDS3DS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1		not-accessible	An entry in the mscLpDS3DS1TestStateTable.
mscLpDS3DS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS3DS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Test tables.
U32 mscLpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3DS1TestType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3DS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT mscLpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
C32 mscLpDS3DS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT mscLpDS3DS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3DS1UsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpDS3DS1Vendor	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
INT mscLpDS3DS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
C32 mscLpDS3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
INT mscLpDS3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpDS3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.13.1		not-accessible	An entry in the mscLpDS3IfEntryTable.
mscLpDS3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpDS3IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpDS3Index	1.3.6.1.4.1.562.36.2.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3 tables.
C32 mscLpDS3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 mscLpDS3LineFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
U32 mscLpDS3LineLength	1.3.6.1.4.1.562.36.2.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
C32 mscLpDS3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpDS3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
INT mscLpDS3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3Mapping	1.3.6.1.4.1.562.36.2.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
INT mscLpDS3OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpDS3OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.16.1		not-accessible	An entry in the mscLpDS3OperTable.
mscLpDS3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.14.1		not-accessible	An entry in the mscLpDS3OperStatusTable.
mscLpDS3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3OperTable	1.3.6.1.4.1.562.36.2.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
C32 mscLpDS3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
mscLpDS3Plcp	1.3.6.1.4.1.562.36.2.1.12.5.4
C32 mscLpDS3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STR mscLpDS3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpDS3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
NON mscLpDS3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Plcp tables.
INT mscLpDS3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
mscLpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1		not-accessible	An entry in the mscLpDS3PlcpOperationalTable.
mscLpDS3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
ROW mscLpDS3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Plcp components. These components cannot be added nor deleted.
mscLpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Plcp component.
mscLpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Plcp components.
INT mscLpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
C32 mscLpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
mscLpDS3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1		not-accessible	An entry in the mscLpDS3PlcpStatsTable.
mscLpDS3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Plcp tables.
C32 mscLpDS3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OCT mscLpDS3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpDS3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.10.1		not-accessible	An entry in the mscLpDS3ProvTable.
mscLpDS3ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
ROW mscLpDS3RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3 components. These components can be added and deleted.
mscLpDS3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3 component.
mscLpDS3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3 components.
C32 mscLpDS3RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
INT mscLpDS3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3RxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT mscLpDS3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpDS3StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.15.1		not-accessible	An entry in the mscLpDS3StateTable.
mscLpDS3StateTable	1.3.6.1.4.1.562.36.2.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.17.1		not-accessible	An entry in the mscLpDS3StatsTable.
mscLpDS3StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpDS3StorageType	1.3.6.1.4.1.562.36.2.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3 tables.
mscLpDS3Test	1.3.6.1.4.1.562.36.2.1.12.5.2
INT mscLpDS3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpDS3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpDS3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpDS3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpDS3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpDS3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpDS3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpDS3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpDS3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpDS3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpDS3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpDS3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpDS3TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Test tables.
INT mscLpDS3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpDS3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpDS3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1		not-accessible	An entry in the mscLpDS3TestResultsTable.
mscLpDS3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpDS3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Test components. These components cannot be added nor deleted.
mscLpDS3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Test component.
mscLpDS3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Test components.
mscLpDS3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1		not-accessible	An entry in the mscLpDS3TestSetupTable.
mscLpDS3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1		not-accessible	An entry in the mscLpDS3TestStateTable.
mscLpDS3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpDS3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Test tables.
U32 mscLpDS3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3TestType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3TxAis	1.3.6.1.4.1.562.36.2.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT mscLpDS3TxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
INT mscLpDS3TxRai	1.3.6.1.4.1.562.36.2.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT mscLpDS3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3UsageState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpDS3Vendor	1.3.6.1.4.1.562.36.2.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpE1	1.3.6.1.4.1.562.36.2.1.12.8
mscLpE1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.12.1		not-accessible	An entry in the mscLpE1AdminInfoTable.
mscLpE1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpE1AdminState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
mscLpE1Audio	1.3.6.1.4.1.562.36.2.1.12.8.5
STR mscLpE1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON mscLpE1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Audio tables.
ROW mscLpE1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Audio components. These components cannot be added nor deleted.
mscLpE1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1Audio component.
mscLpE1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1Audio components.
STO mscLpE1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Audio tables.
OCT mscLpE1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 mscLpE1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
mscLpE1Chan	1.3.6.1.4.1.562.36.2.1.12.8.2
G32 mscLpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1		not-accessible	An entry in the mscLpE1ChanAdminInfoTable.
mscLpE1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpE1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpE1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
OCT mscLpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpE1ChanCell	1.3.6.1.4.1.562.36.2.1.12.8.2.3
U32 mscLpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpE1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpE1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanCell tables.
INT mscLpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpE1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1		not-accessible	An entry in the mscLpE1ChanCellOperTable.
mscLpE1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1		not-accessible	An entry in the mscLpE1ChanCellProvTable.
mscLpE1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpE1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanCell components. These components can be added and deleted.
mscLpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanCell component.
mscLpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanCell components.
INT mscLpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpE1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1		not-accessible	An entry in the mscLpE1ChanCellStatsTable.
mscLpE1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpE1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanCell tables.
G32 mscLpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpE1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1		not-accessible	An entry in the mscLpE1ChanCidDataTable.
mscLpE1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpE1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpE1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpE1ChanFlm	1.3.6.1.4.1.562.36.2.1.12.8.2.5
INT mscLpE1ChanFlmABitMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1	INTEGER	read-write	This attribute controls the monitoring of A-bit defects.
STR mscLpE1ChanFlmComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpE1ChanFlmFlmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1	INTEGER	read-only	This attribute indicates the status of a Frame Relay channel on an E1 line. By combining the E1 channel-associated-signalling (CAS) A-bits status, and HDLC defect, a single value indicates the likely cause of the failure. This mechanism assumes that the far end equipment loops back signaling A-bits for some or all of the timeslots in a channel. The A-bits in channel are transmitted as '0'. If they are all received as '0', it is assumed that the E1 link is up in both directions. The presence of HDLC frames indicates that the service is connected. When A-bits and HDLC frames are correctly received, frameLinkUp is indicated. When neither are received, frameLinkDown is indicated. When HDLC frames are not receive but A-bits are not at fault, lossOfHdlc is indicated. When HDLC frames are received, but there is a fault in the any of timeslot's A-bits on a channel lossOfAbit is indicated.
INT mscLpE1ChanFlmHdlcMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2	INTEGER	read-write	This attribute controls the monitoring of HDLC defect.
NON mscLpE1ChanFlmIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanFlm tables.
mscLpE1ChanFlmOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1		not-accessible	An entry in the mscLpE1ChanFlmOpTable.
mscLpE1ChanFlmOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11		not-accessible	This group contains all specific operational data for an Flm component.
mscLpE1ChanFlmProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1		not-accessible	An entry in the mscLpE1ChanFlmProvTable.
mscLpE1ChanFlmProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10		not-accessible	This group contains all specific provisioning data for an Flm component.
ROW mscLpE1ChanFlmRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanFlm components. These components can be added and deleted.
mscLpE1ChanFlmRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanFlm component.
mscLpE1ChanFlmRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanFlm components.
STO mscLpE1ChanFlmStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanFlm tables.
INT mscLpE1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpE1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1		not-accessible	An entry in the mscLpE1ChanIfEntryTable.
mscLpE1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpE1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpE1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1Chan tables.
INT mscLpE1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpE1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1		not-accessible	An entry in the mscLpE1ChanOperTable.
mscLpE1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1		not-accessible	An entry in the mscLpE1ChanOperStatusTable.
mscLpE1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
OCT mscLpE1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpE1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1		not-accessible	An entry in the mscLpE1ChanProvTable.
mscLpE1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
ROW mscLpE1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1Chan components. These components can be added and deleted.
mscLpE1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1Chan component.
mscLpE1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1Chan components.
INT mscLpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpE1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1		not-accessible	An entry in the mscLpE1ChanStateTable.
mscLpE1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpE1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Chan tables.
mscLpE1ChanTc	1.3.6.1.4.1.562.36.2.1.12.8.2.4
STR mscLpE1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
NON mscLpE1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTc tables.
INT mscLpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
mscLpE1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1		not-accessible	An entry in the mscLpE1ChanTcOpTable.
mscLpE1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpE1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1		not-accessible	An entry in the mscLpE1ChanTcProvTable.
mscLpE1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
HEX mscLpE1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
ROW mscLpE1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanTc components. These components can be added and deleted.
mscLpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTc component.
mscLpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTc components.
U32 mscLpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1		not-accessible	An entry in the mscLpE1ChanTcSigOneTable.
INT mscLpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigOneTable specific index for the mscLpE1ChanTcSigOneTable.
mscLpE1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpE1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigOneTable.
mscLpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1		not-accessible	An entry in the mscLpE1ChanTcSigTwoTable.
INT mscLpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigTwoTable specific index for the mscLpE1ChanTcSigTwoTable.
mscLpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
U32 mscLpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigTwoTable.
STO mscLpE1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTc tables.
mscLpE1ChanTest	1.3.6.1.4.1.562.36.2.1.12.8.2.2
INT mscLpE1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpE1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpE1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpE1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpE1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpE1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpE1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpE1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTest tables.
INT mscLpE1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpE1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpE1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1		not-accessible	An entry in the mscLpE1ChanTestResultsTable.
mscLpE1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpE1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1ChanTest components. These components cannot be added nor deleted.
mscLpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTest component.
mscLpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTest components.
mscLpE1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1		not-accessible	An entry in the mscLpE1ChanTestSetupTable.
mscLpE1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1		not-accessible	An entry in the mscLpE1ChanTestStateTable.
mscLpE1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpE1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTest tables.
U32 mscLpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
OCT mscLpE1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpE1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpE1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpE1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.11.1		not-accessible	An entry in the mscLpE1CidDataTable.
mscLpE1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpE1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
STR mscLpE1CommentText	1.3.6.1.4.1.562.36.2.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE1ComponentName	1.3.6.1.4.1.562.36.2.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpE1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
INT mscLpE1Crc4Mode	1.3.6.1.4.1.562.36.2.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
C32 mscLpE1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
U32 mscLpE1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpE1Dsp	1.3.6.1.4.1.562.36.2.1.12.8.4
STR mscLpE1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON mscLpE1DspIndex	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Dsp tables.
ROW mscLpE1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Dsp components. These components cannot be added nor deleted.
mscLpE1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1Dsp component.
mscLpE1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1Dsp components.
STO mscLpE1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Dsp tables.
mscLpE1E1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.17.1		not-accessible	An entry in the mscLpE1E1OperTable.
mscLpE1E1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
C32 mscLpE1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpE1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpE1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
INT mscLpE1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpE1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.13.1		not-accessible	An entry in the mscLpE1IfEntryTable.
mscLpE1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpE1IfIndex	1.3.6.1.4.1.562.36.2.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpE1Index	1.3.6.1.4.1.562.36.2.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1 tables.
INT mscLpE1LineType	1.3.6.1.4.1.562.36.2.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT mscLpE1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpE1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
C32 mscLpE1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
INT mscLpE1MultifrmLofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT mscLpE1OperationalState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpE1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.16.1		not-accessible	An entry in the mscLpE1OperTable.
mscLpE1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.14.1		not-accessible	An entry in the mscLpE1OperStatusTable.
mscLpE1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
OCT mscLpE1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpE1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.10.1		not-accessible	An entry in the mscLpE1ProvTable.
mscLpE1ProvTable	1.3.6.1.4.1.562.36.2.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
U32 mscLpE1RaiClearAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 mscLpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
ROW mscLpE1RowStatus	1.3.6.1.4.1.562.36.2.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1 components. These components can be added and deleted.
mscLpE1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.1.1		not-accessible	A single entry in the table represents a single mscLpE1 component.
mscLpE1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.1		not-accessible	This entry controls the addition and deletion of mscLpE1 components.
C32 mscLpE1RunningTime	1.3.6.1.4.1.562.36.2.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
INT mscLpE1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT mscLpE1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpE1SendRaiOnAis	1.3.6.1.4.1.562.36.2.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
C32 mscLpE1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpE1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpE1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
INT mscLpE1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpE1StateEntry	1.3.6.1.4.1.562.36.2.1.12.8.15.1		not-accessible	An entry in the mscLpE1StateTable.
mscLpE1StateTable	1.3.6.1.4.1.562.36.2.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.18.1		not-accessible	An entry in the mscLpE1StatsTable.
mscLpE1StatsTable	1.3.6.1.4.1.562.36.2.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
STO mscLpE1StorageType	1.3.6.1.4.1.562.36.2.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1 tables.
mscLpE1Test	1.3.6.1.4.1.562.36.2.1.12.8.3
INT mscLpE1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpE1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpE1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpE1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpE1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpE1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1TestDuration	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpE1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpE1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpE1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpE1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpE1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpE1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpE1TestIndex	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Test tables.
INT mscLpE1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpE1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpE1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1		not-accessible	An entry in the mscLpE1TestResultsTable.
mscLpE1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpE1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Test components. These components cannot be added nor deleted.
mscLpE1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1Test component.
mscLpE1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1Test components.
mscLpE1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1		not-accessible	An entry in the mscLpE1TestSetupTable.
mscLpE1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1		not-accessible	An entry in the mscLpE1TestStateTable.
mscLpE1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpE1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Test tables.
U32 mscLpE1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE1TestType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
INT mscLpE1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
C32 mscLpE1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
INT mscLpE1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE1UsageState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpE1Vendor	1.3.6.1.4.1.562.36.2.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpE3	1.3.6.1.4.1.562.36.2.1.12.6
mscLpE3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.6.12.1		not-accessible	An entry in the mscLpE3AdminInfoTable.
mscLpE3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpE3AdminState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpE3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
OCT mscLpE3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpE3Cell	1.3.6.1.4.1.562.36.2.1.12.6.5
U32 mscLpE3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpE3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpE3CellIndex	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Cell tables.
INT mscLpE3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpE3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1		not-accessible	An entry in the mscLpE3CellOperTable.
mscLpE3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1		not-accessible	An entry in the mscLpE3CellProvTable.
mscLpE3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpE3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3Cell components. These components can be added and deleted.
mscLpE3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single mscLpE3Cell component.
mscLpE3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of mscLpE3Cell components.
INT mscLpE3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpE3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpE3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1		not-accessible	An entry in the mscLpE3CellStatsTable.
mscLpE3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpE3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Cell tables.
G32 mscLpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpE3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.6.11.1		not-accessible	An entry in the mscLpE3CidDataTable.
mscLpE3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpE3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
STR mscLpE3CommentText	1.3.6.1.4.1.562.36.2.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE3ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpE3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpE3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpE3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
INT mscLpE3Framing	1.3.6.1.4.1.562.36.2.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
mscLpE3G832	1.3.6.1.4.1.562.36.2.1.12.6.3
STR mscLpE3G832ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3G832FarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 mscLpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 mscLpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
NON mscLpE3G832Index	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3G832 tables.
mscLpE3G832OperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1		not-accessible	An entry in the mscLpE3G832OperationalTable.
mscLpE3G832OperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
mscLpE3G832ProvisionedEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1		not-accessible	An entry in the mscLpE3G832ProvisionedTable.
mscLpE3G832ProvisionedTable	1.3.6.1.4.1.562.36.2.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
ROW mscLpE3G832RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3G832 components. These components can be added and deleted.
mscLpE3G832RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpE3G832 component.
mscLpE3G832RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpE3G832 components.
mscLpE3G832StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1		not-accessible	An entry in the mscLpE3G832StatsTable.
mscLpE3G832StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpE3G832StorageType	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3G832 tables.
INT mscLpE3G832TimingMarker	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
STR mscLpE3G832TrailTraceExpected	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
INT mscLpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
STR mscLpE3G832TrailTraceReceived	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
STR mscLpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
INT mscLpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT mscLpE3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpE3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.6.13.1		not-accessible	An entry in the mscLpE3IfEntryTable.
mscLpE3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpE3IfIndex	1.3.6.1.4.1.562.36.2.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpE3Index	1.3.6.1.4.1.562.36.2.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE3 tables.
C32 mscLpE3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 mscLpE3LineFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
U32 mscLpE3LineLength	1.3.6.1.4.1.562.36.2.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
C32 mscLpE3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 mscLpE3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
U32 mscLpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.36.2.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 mscLpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.36.2.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
INT mscLpE3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3Mapping	1.3.6.1.4.1.562.36.2.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT mscLpE3OperationalState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpE3OperEntry	1.3.6.1.4.1.562.36.2.1.12.6.16.1		not-accessible	An entry in the mscLpE3OperTable.
mscLpE3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.14.1		not-accessible	An entry in the mscLpE3OperStatusTable.
mscLpE3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE3OperTable	1.3.6.1.4.1.562.36.2.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
C32 mscLpE3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpE3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
mscLpE3Plcp	1.3.6.1.4.1.562.36.2.1.12.6.4
C32 mscLpE3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STR mscLpE3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpE3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
NON mscLpE3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Plcp tables.
INT mscLpE3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
mscLpE3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1		not-accessible	An entry in the mscLpE3PlcpOperationalTable.
mscLpE3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
ROW mscLpE3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Plcp components. These components cannot be added nor deleted.
mscLpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single mscLpE3Plcp component.
mscLpE3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of mscLpE3Plcp components.
INT mscLpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
C32 mscLpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
mscLpE3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1		not-accessible	An entry in the mscLpE3PlcpStatsTable.
mscLpE3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpE3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Plcp tables.
C32 mscLpE3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
OCT mscLpE3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpE3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.10.1		not-accessible	An entry in the mscLpE3ProvTable.
mscLpE3ProvTable	1.3.6.1.4.1.562.36.2.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
ROW mscLpE3RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3 components. These components can be added and deleted.
mscLpE3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.1.1		not-accessible	A single entry in the table represents a single mscLpE3 component.
mscLpE3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.1		not-accessible	This entry controls the addition and deletion of mscLpE3 components.
C32 mscLpE3RunningTime	1.3.6.1.4.1.562.36.2.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
INT mscLpE3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpE3StateEntry	1.3.6.1.4.1.562.36.2.1.12.6.15.1		not-accessible	An entry in the mscLpE3StateTable.
mscLpE3StateTable	1.3.6.1.4.1.562.36.2.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.17.1		not-accessible	An entry in the mscLpE3StatsTable.
mscLpE3StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpE3StorageType	1.3.6.1.4.1.562.36.2.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3 tables.
mscLpE3Test	1.3.6.1.4.1.562.36.2.1.12.6.2
INT mscLpE3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpE3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpE3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpE3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpE3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpE3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE3TestDuration	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpE3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpE3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpE3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpE3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpE3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpE3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpE3TestIndex	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Test tables.
INT mscLpE3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpE3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpE3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1		not-accessible	An entry in the mscLpE3TestResultsTable.
mscLpE3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpE3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Test components. These components cannot be added nor deleted.
mscLpE3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpE3Test component.
mscLpE3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpE3Test components.
mscLpE3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1		not-accessible	An entry in the mscLpE3TestSetupTable.
mscLpE3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1		not-accessible	An entry in the mscLpE3TestStateTable.
mscLpE3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpE3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Test tables.
U32 mscLpE3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE3TestType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE3TxAis	1.3.6.1.4.1.562.36.2.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT mscLpE3TxRai	1.3.6.1.4.1.562.36.2.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
INT mscLpE3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE3UsageState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpE3Vendor	1.3.6.1.4.1.562.36.2.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpEng	1.3.6.1.4.1.562.36.2.1.12.23
STR mscLpEngComponentName	1.3.6.1.4.1.562.36.2.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
mscLpEngDs	1.3.6.1.4.1.562.36.2.1.12.23.2
U32 mscLpEngDsAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
STR mscLpEngDsComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
INT mscLpEngDsIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the mscLpEngDs tables.
mscLpEngDsOperEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1		not-accessible	An entry in the mscLpEngDsOperTable.
mscLpEngDsOperTable	1.3.6.1.4.1.562.36.2.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
mscLpEngDsOv	1.3.6.1.4.1.562.36.2.1.12.23.2.2
U32 mscLpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
STR mscLpEngDsOvComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
NON mscLpEngDsOvIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEngDsOv tables.
mscLpEngDsOvProvEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1		not-accessible	An entry in the mscLpEngDsOvProvTable.
mscLpEngDsOvProvTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
ROW mscLpEngDsOvRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDsOv components. These components can be added and deleted.
mscLpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDsOv component.
mscLpEngDsOvRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDsOv components.
STO mscLpEngDsOvStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDsOv tables.
ROW mscLpEngDsRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDs components. These components can be added and deleted.
mscLpEngDsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDs component.
mscLpEngDsRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDs components.
STO mscLpEngDsStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDs tables.
NON mscLpEngIndex	1.3.6.1.4.1.562.36.2.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEng tables.
ROW mscLpEngRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpEng components. These components cannot be added nor deleted.
mscLpEngRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.1.1		not-accessible	A single entry in the table represents a single mscLpEng component.
mscLpEngRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.1		not-accessible	This entry controls the addition and deletion of mscLpEng components.
STO mscLpEngStorageType	1.3.6.1.4.1.562.36.2.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEng tables.
mscLpHssi	1.3.6.1.4.1.562.36.2.1.12.17
INT mscLpHssiActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
G32 mscLpHssiActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
G32 mscLpHssiActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
mscLpHssiAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.17.12.1		not-accessible	An entry in the mscLpHssiAdminInfoTable.
mscLpHssiAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpHssiAdminState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpHssiAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpHssiApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
OCT mscLpHssiAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpHssiCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.17.11.1		not-accessible	An entry in the mscLpHssiCidDataTable.
mscLpHssiCidDataTable	1.3.6.1.4.1.562.36.2.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpHssiCommentText	1.3.6.1.4.1.562.36.2.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpHssiComponentName	1.3.6.1.4.1.562.36.2.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpHssiControlStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpHssiCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT mscLpHssiDataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
C32 mscLpHssiDataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT mscLpHssiIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpHssiIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.17.13.1		not-accessible	An entry in the mscLpHssiIfEntryTable.
mscLpHssiIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpHssiIfIndex	1.3.6.1.4.1.562.36.2.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpHssiIndex	1.3.6.1.4.1.562.36.2.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpHssi tables.
U32 mscLpHssiLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
OCT mscLpHssiLineState	1.3.6.1.4.1.562.36.2.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
INT mscLpHssiLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpHssiOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpHssiOperEntry	1.3.6.1.4.1.562.36.2.1.12.17.16.1		not-accessible	An entry in the mscLpHssiOperTable.
mscLpHssiOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.14.1		not-accessible	An entry in the mscLpHssiOperStatusTable.
mscLpHssiOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpHssiOperTable	1.3.6.1.4.1.562.36.2.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
OCT mscLpHssiProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpHssiProvEntry	1.3.6.1.4.1.562.36.2.1.12.17.10.1		not-accessible	An entry in the mscLpHssiProvTable.
mscLpHssiProvTable	1.3.6.1.4.1.562.36.2.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
OCT mscLpHssiReadyLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
ROW mscLpHssiRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpHssi components. These components can be added and deleted.
mscLpHssiRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.1.1		not-accessible	A single entry in the table represents a single mscLpHssi component.
mscLpHssiRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.1		not-accessible	This entry controls the addition and deletion of mscLpHssi components.
INT mscLpHssiSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpHssiStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpHssiStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.15.1		not-accessible	An entry in the mscLpHssiStateTable.
mscLpHssiStateTable	1.3.6.1.4.1.562.36.2.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpHssiStorageType	1.3.6.1.4.1.562.36.2.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssi tables.
mscLpHssiTest	1.3.6.1.4.1.562.36.2.1.12.17.2
INT mscLpHssiTestAdminState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpHssiTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpHssiTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpHssiTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpHssiTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpHssiTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpHssiTestComponentName	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpHssiTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpHssiTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpHssiTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpHssiTestDuration	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpHssiTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpHssiTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpHssiTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpHssiTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpHssiTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpHssiTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpHssiTestIndex	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpHssiTest tables.
INT mscLpHssiTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpHssiTestPurpose	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpHssiTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1		not-accessible	An entry in the mscLpHssiTestResultsTable.
mscLpHssiTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpHssiTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpHssiTest components. These components cannot be added nor deleted.
mscLpHssiTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single mscLpHssiTest component.
mscLpHssiTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of mscLpHssiTest components.
mscLpHssiTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1		not-accessible	An entry in the mscLpHssiTestSetupTable.
mscLpHssiTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpHssiTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1		not-accessible	An entry in the mscLpHssiTestStateTable.
mscLpHssiTestStateTable	1.3.6.1.4.1.562.36.2.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpHssiTestStorageType	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssiTest tables.
U32 mscLpHssiTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpHssiTestType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpHssiTestUsageState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpHssiUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpHssiUsageState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpHssiVendor	1.3.6.1.4.1.562.36.2.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
I32 mscLpIndex	1.3.6.1.4.1.562.36.2.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLp tables.
mscLpJT2	1.3.6.1.4.1.562.36.2.1.12.16
mscLpJT2AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.16.17.1		not-accessible	An entry in the mscLpJT2AdminInfoTable.
mscLpJT2AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpJT2AdminState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpJT2AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpJT2ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
OCT mscLpJT2AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
C32 mscLpJT2BpvErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
mscLpJT2Cell	1.3.6.1.4.1.562.36.2.1.12.16.3
U32 mscLpJT2CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpJT2CellComponentName	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpJT2CellIndex	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Cell tables.
INT mscLpJT2CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpJT2CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1		not-accessible	An entry in the mscLpJT2CellOperTable.
mscLpJT2CellOperTable	1.3.6.1.4.1.562.36.2.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpJT2CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1		not-accessible	An entry in the mscLpJT2CellProvTable.
mscLpJT2CellProvTable	1.3.6.1.4.1.562.36.2.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpJT2CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Cell components. These components cannot be added nor deleted.
mscLpJT2CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Cell component.
mscLpJT2CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Cell components.
INT mscLpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpJT2CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpJT2CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1		not-accessible	An entry in the mscLpJT2CellStatsTable.
mscLpJT2CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpJT2CellStorageType	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Cell tables.
G32 mscLpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpJT2CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.16.10.1		not-accessible	An entry in the mscLpJT2CidDataTable.
mscLpJT2CidDataTable	1.3.6.1.4.1.562.36.2.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpJT2ClockingSource	1.3.6.1.4.1.562.36.2.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
STR mscLpJT2CommentText	1.3.6.1.4.1.562.36.2.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpJT2ComponentName	1.3.6.1.4.1.562.36.2.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpJT2ControlStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
C32 mscLpJT2CrcErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
U32 mscLpJT2CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpJT2ErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 mscLpJT2ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 mscLpJT2FrameErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
INT mscLpJT2IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpJT2IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.16.12.1		not-accessible	An entry in the mscLpJT2IfEntryTable.
mscLpJT2IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpJT2IfIndex	1.3.6.1.4.1.562.36.2.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpJT2Index	1.3.6.1.4.1.562.36.2.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpJT2 tables.
U32 mscLpJT2LineLength	1.3.6.1.4.1.562.36.2.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
INT mscLpJT2LofAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2LosAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
C32 mscLpJT2LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
INT mscLpJT2OperationalState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpJT2OperEntry	1.3.6.1.4.1.562.36.2.1.12.16.15.1		not-accessible	An entry in the mscLpJT2OperTable.
mscLpJT2OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.13.1		not-accessible	An entry in the mscLpJT2OperStatusTable.
mscLpJT2OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpJT2OperTable	1.3.6.1.4.1.562.36.2.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
OCT mscLpJT2ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpJT2ProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.11.1		not-accessible	An entry in the mscLpJT2ProvTable.
mscLpJT2ProvTable	1.3.6.1.4.1.562.36.2.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
ROW mscLpJT2RowStatus	1.3.6.1.4.1.562.36.2.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpJT2 components. These components can be added and deleted.
mscLpJT2RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.1.1		not-accessible	A single entry in the table represents a single mscLpJT2 component.
mscLpJT2RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.1		not-accessible	This entry controls the addition and deletion of mscLpJT2 components.
C32 mscLpJT2RunningTime	1.3.6.1.4.1.562.36.2.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
INT mscLpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
C32 mscLpJT2SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 mscLpJT2SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
INT mscLpJT2SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpJT2StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpJT2StateEntry	1.3.6.1.4.1.562.36.2.1.12.16.14.1		not-accessible	An entry in the mscLpJT2StateTable.
mscLpJT2StateTable	1.3.6.1.4.1.562.36.2.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpJT2StatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.16.1		not-accessible	An entry in the mscLpJT2StatsTable.
mscLpJT2StatsTable	1.3.6.1.4.1.562.36.2.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
STO mscLpJT2StorageType	1.3.6.1.4.1.562.36.2.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2 tables.
mscLpJT2Test	1.3.6.1.4.1.562.36.2.1.12.16.2
INT mscLpJT2TestAdminState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpJT2TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpJT2TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpJT2TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpJT2TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpJT2TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpJT2TestComponentName	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpJT2TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpJT2TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpJT2TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpJT2TestDuration	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpJT2TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpJT2TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpJT2TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpJT2TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpJT2TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpJT2TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpJT2TestIndex	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Test tables.
INT mscLpJT2TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpJT2TestPurpose	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpJT2TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1		not-accessible	An entry in the mscLpJT2TestResultsTable.
mscLpJT2TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpJT2TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Test components. These components cannot be added nor deleted.
mscLpJT2TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Test component.
mscLpJT2TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Test components.
mscLpJT2TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1		not-accessible	An entry in the mscLpJT2TestSetupTable.
mscLpJT2TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpJT2TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1		not-accessible	An entry in the mscLpJT2TestStateTable.
mscLpJT2TestStateTable	1.3.6.1.4.1.562.36.2.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpJT2TestStorageType	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Test tables.
U32 mscLpJT2TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpJT2TestType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpJT2TestUsageState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT mscLpJT2TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
C32 mscLpJT2UnavailSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
INT mscLpJT2UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpJT2UsageState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpJT2Vendor	1.3.6.1.4.1.562.36.2.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpLinkToApplicationsEntry	1.3.6.1.4.1.562.36.2.1.12.242.1		not-accessible	An entry in the mscLpLinkToApplicationsTable.
mscLpLinkToApplicationsTable	1.3.6.1.4.1.562.36.2.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
LIN mscLpLinkToApplicationsValue	1.3.6.1.4.1.562.36.2.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the mscLpLinkToApplicationsTable.
U32 mscLpLocalMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card.
G32 mscLpLocalMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card.
G32 mscLpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.36.2.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.36.2.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
LIN mscLpLogicalProcessorType	1.3.6.1.4.1.562.36.2.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
LIN mscLpMainCard	1.3.6.1.4.1.562.36.2.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
INT mscLpMainCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned. notAvailable The main card is not available. available The main card is available (running as standby). active The main card is running as active.
mscLpMemoryCapacityEntry	1.3.6.1.4.1.562.36.2.1.12.244.1		not-accessible	An entry in the mscLpMemoryCapacityTable.
INT mscLpMemoryCapacityIndex	1.3.6.1.4.1.562.36.2.1.12.244.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryCapacityTable specific index for the mscLpMemoryCapacityTable.
mscLpMemoryCapacityTable	1.3.6.1.4.1.562.36.2.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity for each type of memory.
U32 mscLpMemoryCapacityValue	1.3.6.1.4.1.562.36.2.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the mscLpMemoryCapacityTable.
mscLpMemoryUsageAvgEntry	1.3.6.1.4.1.562.36.2.1.12.276.1		not-accessible	An entry in the mscLpMemoryUsageAvgTable.
INT mscLpMemoryUsageAvgIndex	1.3.6.1.4.1.562.36.2.1.12.276.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgTable specific index for the mscLpMemoryUsageAvgTable.
mscLpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.36.2.1.12.278.1		not-accessible	An entry in the mscLpMemoryUsageAvgMaxTable.
INT mscLpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.36.2.1.12.278.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMaxTable specific index for the mscLpMemoryUsageAvgMaxTable.
mscLpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.36.2.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 mscLpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.36.2.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMaxTable.
mscLpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.36.2.1.12.277.1		not-accessible	An entry in the mscLpMemoryUsageAvgMinTable.
INT mscLpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.36.2.1.12.277.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMinTable specific index for the mscLpMemoryUsageAvgMinTable.
mscLpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.36.2.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 mscLpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.36.2.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMinTable.
mscLpMemoryUsageAvgTable	1.3.6.1.4.1.562.36.2.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
G32 mscLpMemoryUsageAvgValue	1.3.6.1.4.1.562.36.2.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgTable.
mscLpMemoryUsageEntry	1.3.6.1.4.1.562.36.2.1.12.245.1		not-accessible	An entry in the mscLpMemoryUsageTable.
INT mscLpMemoryUsageIndex	1.3.6.1.4.1.562.36.2.1.12.245.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageTable specific index for the mscLpMemoryUsageTable.
mscLpMemoryUsageTable	1.3.6.1.4.1.562.36.2.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization for each type of memory.
G32 mscLpMemoryUsageValue	1.3.6.1.4.1.562.36.2.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageTable.
U32 mscLpMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity.
G32 mscLpMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
INT mscLpOperationalState	1.3.6.1.4.1.562.36.2.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpOperEntry	1.3.6.1.4.1.562.36.2.1.12.103.1		not-accessible	An entry in the mscLpOperTable.
mscLpOperTable	1.3.6.1.4.1.562.36.2.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
OCT mscLpProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpProvEntry	1.3.6.1.4.1.562.36.2.1.12.100.1		not-accessible	An entry in the mscLpProvTable.
mscLpProvTable	1.3.6.1.4.1.562.36.2.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
INT mscLpRestartOnCpSwitch	1.3.6.1.4.1.562.36.2.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
ROW mscLpRowStatus	1.3.6.1.4.1.562.36.2.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLp components. These components can be added and deleted.
mscLpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.1.1		not-accessible	A single entry in the table represents a single mscLp component.
mscLpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.1		not-accessible	This entry controls the addition and deletion of mscLp components.
ENT mscLpScheduledSwitchover	1.3.6.1.4.1.562.36.2.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
mscLpSdh	1.3.6.1.4.1.562.36.2.1.12.15
mscLpSdhAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.15.12.1		not-accessible	An entry in the mscLpSdhAdminInfoTable.
mscLpSdhAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpSdhAdminState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSdhAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSdhAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpSdhCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.11.1		not-accessible	An entry in the mscLpSdhCidDataTable.
mscLpSdhCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpSdhClockingSource	1.3.6.1.4.1.562.36.2.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
STR mscLpSdhCommentText	1.3.6.1.4.1.562.36.2.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpSdhComponentName	1.3.6.1.4.1.562.36.2.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpSdhControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpSdhCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpSdhErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSdhFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSdhFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 mscLpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
INT mscLpSdhIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpSdhIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.13.1		not-accessible	An entry in the mscLpSdhIfEntryTable.
mscLpSdhIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpSdhIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpSdhIndex	1.3.6.1.4.1.562.36.2.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdh tables.
C32 mscLpSdhLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSdhLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
INT mscLpSdhLofAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhLosAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpSdhOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.16.1		not-accessible	An entry in the mscLpSdhOperTable.
mscLpSdhOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.14.1		not-accessible	An entry in the mscLpSdhOperStatusTable.
mscLpSdhOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhOperTable	1.3.6.1.4.1.562.36.2.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSdhPath	1.3.6.1.4.1.562.36.2.1.12.15.2
INT mscLpSdhPathAdminState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSdhPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpSdhPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OCT mscLpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpSdhPathCell	1.3.6.1.4.1.562.36.2.1.12.15.2.2
U32 mscLpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpSdhPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpSdhPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhPathCell tables.
INT mscLpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpSdhPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1		not-accessible	An entry in the mscLpSdhPathCellOperTable.
mscLpSdhPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSdhPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1		not-accessible	An entry in the mscLpSdhPathCellProvTable.
mscLpSdhPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpSdhPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhPathCell components. These components cannot be added nor deleted.
mscLpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPathCell component.
mscLpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPathCell components.
INT mscLpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpSdhPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1		not-accessible	An entry in the mscLpSdhPathCellStatsTable.
mscLpSdhPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSdhPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPathCell tables.
G32 mscLpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpSdhPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1		not-accessible	An entry in the mscLpSdhPathCidDataTable.
mscLpSdhPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpSdhPathComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpSdhPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 mscLpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
INT mscLpSdhPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpSdhPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1		not-accessible	An entry in the mscLpSdhPathIfEntryTable.
mscLpSdhPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpSdhPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpSdhPathIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdhPath tables.
INT mscLpSdhPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpSdhPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1		not-accessible	An entry in the mscLpSdhPathOperTable.
mscLpSdhPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1		not-accessible	An entry in the mscLpSdhPathOperStatusTable.
mscLpSdhPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhPathOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
C32 mscLpSdhPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSdhPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OCT mscLpSdhPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpSdhPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1		not-accessible	An entry in the mscLpSdhPathProvTable.
mscLpSdhPathProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
ROW mscLpSdhPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdhPath components. These components can be added and deleted.
mscLpSdhPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPath component.
mscLpSdhPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPath components.
INT mscLpSdhPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSdhPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpSdhPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1		not-accessible	An entry in the mscLpSdhPathStateTable.
mscLpSdhPathStateTable	1.3.6.1.4.1.562.36.2.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1		not-accessible	An entry in the mscLpSdhPathStatsTable.
mscLpSdhPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSdhPathStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPath tables.
INT mscLpSdhPathTxAis	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSdhPathUsageState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSdhProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpSdhProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.10.1		not-accessible	An entry in the mscLpSdhProvTable.
mscLpSdhProvTable	1.3.6.1.4.1.562.36.2.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
ROW mscLpSdhRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdh components. These components can be added and deleted.
mscLpSdhRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.1.1		not-accessible	A single entry in the table represents a single mscLpSdh component.
mscLpSdhRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.1		not-accessible	This entry controls the addition and deletion of mscLpSdh components.
C32 mscLpSdhRunningTime	1.3.6.1.4.1.562.36.2.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
INT mscLpSdhRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
C32 mscLpSdhSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSdhSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSdhSectFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSdhSectLosSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSdhSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
INT mscLpSdhSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSdhStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpSdhStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.15.1		not-accessible	An entry in the mscLpSdhStateTable.
mscLpSdhStateTable	1.3.6.1.4.1.562.36.2.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.17.1		not-accessible	An entry in the mscLpSdhStatsTable.
mscLpSdhStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSdhStorageType	1.3.6.1.4.1.562.36.2.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdh tables.
mscLpSdhTest	1.3.6.1.4.1.562.36.2.1.12.15.3
INT mscLpSdhTestAdminState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpSdhTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpSdhTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSdhTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSdhTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpSdhTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpSdhTestComponentName	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpSdhTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpSdhTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSdhTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSdhTestDuration	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpSdhTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpSdhTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpSdhTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpSdhTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpSdhTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpSdhTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpSdhTestIndex	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhTest tables.
INT mscLpSdhTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpSdhTestPurpose	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpSdhTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1		not-accessible	An entry in the mscLpSdhTestResultsTable.
mscLpSdhTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpSdhTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhTest components. These components cannot be added nor deleted.
mscLpSdhTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single mscLpSdhTest component.
mscLpSdhTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of mscLpSdhTest components.
mscLpSdhTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1		not-accessible	An entry in the mscLpSdhTestSetupTable.
mscLpSdhTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSdhTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1		not-accessible	An entry in the mscLpSdhTestStateTable.
mscLpSdhTestStateTable	1.3.6.1.4.1.562.36.2.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpSdhTestStorageType	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhTest tables.
U32 mscLpSdhTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpSdhTestType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpSdhTestUsageState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpSdhTxAis	1.3.6.1.4.1.562.36.2.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSdhTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhUsageState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpSdhVendor	1.3.6.1.4.1.562.36.2.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpSonet	1.3.6.1.4.1.562.36.2.1.12.14
mscLpSonetAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.14.12.1		not-accessible	An entry in the mscLpSonetAdminInfoTable.
mscLpSonetAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpSonetAdminState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSonetAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSonetAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpSonetCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.11.1		not-accessible	An entry in the mscLpSonetCidDataTable.
mscLpSonetCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpSonetClockingSource	1.3.6.1.4.1.562.36.2.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
STR mscLpSonetCommentText	1.3.6.1.4.1.562.36.2.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpSonetComponentName	1.3.6.1.4.1.562.36.2.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpSonetControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpSonetCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpSonetErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSonetFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSonetFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 mscLpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
INT mscLpSonetIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpSonetIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.13.1		not-accessible	An entry in the mscLpSonetIfEntryTable.
mscLpSonetIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpSonetIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpSonetIndex	1.3.6.1.4.1.562.36.2.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonet tables.
C32 mscLpSonetLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSonetLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
INT mscLpSonetLofAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetLosAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpSonetOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.16.1		not-accessible	An entry in the mscLpSonetOperTable.
mscLpSonetOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.14.1		not-accessible	An entry in the mscLpSonetOperStatusTable.
mscLpSonetOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetOperTable	1.3.6.1.4.1.562.36.2.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSonetPath	1.3.6.1.4.1.562.36.2.1.12.14.2
INT mscLpSonetPathAdminState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSonetPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpSonetPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
OCT mscLpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpSonetPathCell	1.3.6.1.4.1.562.36.2.1.12.14.2.2
U32 mscLpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
STR mscLpSonetPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
C32 mscLpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
INT mscLpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
NON mscLpSonetPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetPathCell tables.
INT mscLpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpSonetPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1		not-accessible	An entry in the mscLpSonetPathCellOperTable.
mscLpSonetPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSonetPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1		not-accessible	An entry in the mscLpSonetPathCellProvTable.
mscLpSonetPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
G32 mscLpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
ROW mscLpSonetPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetPathCell components. These components cannot be added nor deleted.
mscLpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPathCell component.
mscLpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPathCell components.
INT mscLpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
C32 mscLpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
mscLpSonetPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1		not-accessible	An entry in the mscLpSonetPathCellStatsTable.
mscLpSonetPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSonetPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPathCell tables.
G32 mscLpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
mscLpSonetPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1		not-accessible	An entry in the mscLpSonetPathCidDataTable.
mscLpSonetPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
STR mscLpSonetPathComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpSonetPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
C32 mscLpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 mscLpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
INT mscLpSonetPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpSonetPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1		not-accessible	An entry in the mscLpSonetPathIfEntryTable.
mscLpSonetPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpSonetPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpSonetPathIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonetPath tables.
INT mscLpSonetPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpSonetPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1		not-accessible	An entry in the mscLpSonetPathOperTable.
mscLpSonetPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1		not-accessible	An entry in the mscLpSonetPathOperStatusTable.
mscLpSonetPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetPathOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
C32 mscLpSonetPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSonetPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
OCT mscLpSonetPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpSonetPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1		not-accessible	An entry in the mscLpSonetPathProvTable.
mscLpSonetPathProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
ROW mscLpSonetPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonetPath components. These components can be added and deleted.
mscLpSonetPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPath component.
mscLpSonetPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPath components.
INT mscLpSonetPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSonetPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpSonetPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1		not-accessible	An entry in the mscLpSonetPathStateTable.
mscLpSonetPathStateTable	1.3.6.1.4.1.562.36.2.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1		not-accessible	An entry in the mscLpSonetPathStatsTable.
mscLpSonetPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSonetPathStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPath tables.
INT mscLpSonetPathTxAis	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSonetPathUsageState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSonetProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpSonetProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.10.1		not-accessible	An entry in the mscLpSonetProvTable.
mscLpSonetProvTable	1.3.6.1.4.1.562.36.2.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
ROW mscLpSonetRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonet components. These components can be added and deleted.
mscLpSonetRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.1.1		not-accessible	A single entry in the table represents a single mscLpSonet component.
mscLpSonetRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.1		not-accessible	This entry controls the addition and deletion of mscLpSonet components.
C32 mscLpSonetRunningTime	1.3.6.1.4.1.562.36.2.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
INT mscLpSonetRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
C32 mscLpSonetSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSonetSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSonetSectFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSonetSectLosSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSonetSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
INT mscLpSonetSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSonetStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpSonetStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.15.1		not-accessible	An entry in the mscLpSonetStateTable.
mscLpSonetStateTable	1.3.6.1.4.1.562.36.2.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.17.1		not-accessible	An entry in the mscLpSonetStatsTable.
mscLpSonetStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
STO mscLpSonetStorageType	1.3.6.1.4.1.562.36.2.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonet tables.
mscLpSonetTest	1.3.6.1.4.1.562.36.2.1.12.14.3
INT mscLpSonetTestAdminState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpSonetTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpSonetTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSonetTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSonetTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpSonetTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpSonetTestComponentName	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpSonetTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpSonetTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSonetTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSonetTestDuration	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpSonetTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpSonetTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpSonetTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpSonetTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpSonetTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpSonetTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpSonetTestIndex	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetTest tables.
INT mscLpSonetTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpSonetTestPurpose	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpSonetTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1		not-accessible	An entry in the mscLpSonetTestResultsTable.
mscLpSonetTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpSonetTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetTest components. These components cannot be added nor deleted.
mscLpSonetTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single mscLpSonetTest component.
mscLpSonetTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of mscLpSonetTest components.
mscLpSonetTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1		not-accessible	An entry in the mscLpSonetTestSetupTable.
mscLpSonetTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSonetTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1		not-accessible	An entry in the mscLpSonetTestStateTable.
mscLpSonetTestStateTable	1.3.6.1.4.1.562.36.2.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpSonetTestStorageType	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetTest tables.
U32 mscLpSonetTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpSonetTestType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpSonetTestUsageState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpSonetTxAis	1.3.6.1.4.1.562.36.2.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSonetTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetUsageState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpSonetVendor	1.3.6.1.4.1.562.36.2.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
LIN mscLpSpareCard	1.3.6.1.4.1.562.36.2.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
INT mscLpSpareCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned. notAvailable The spare card is not available. alreadyInUse The spare card is already in use by another LP. available The spare card is available (running as standby). active The spare card is running as active.
INT mscLpStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpStateEntry	1.3.6.1.4.1.562.36.2.1.12.102.1		not-accessible	An entry in the mscLpStateTable.
mscLpStateTable	1.3.6.1.4.1.562.36.2.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpStorageType	1.3.6.1.4.1.562.36.2.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLp tables.
U32 mscLpTimeInterval	1.3.6.1.4.1.562.36.2.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
INT mscLpUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpUsageState	1.3.6.1.4.1.562.36.2.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpUtilEntry	1.3.6.1.4.1.562.36.2.1.12.104.1		not-accessible	An entry in the mscLpUtilTable.
mscLpUtilTable	1.3.6.1.4.1.562.36.2.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
mscLpV35	1.3.6.1.4.1.562.36.2.1.12.9
INT mscLpV35ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
G32 mscLpV35ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 mscLpV35ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
mscLpV35AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.9.12.1		not-accessible	An entry in the mscLpV35AdminInfoTable.
mscLpV35AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpV35AdminState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpV35AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpV35ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
OCT mscLpV35AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpV35CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.9.11.1		not-accessible	An entry in the mscLpV35CidDataTable.
mscLpV35CidDataTable	1.3.6.1.4.1.562.36.2.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpV35ClockingSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
STR mscLpV35CommentText	1.3.6.1.4.1.562.36.2.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpV35ComponentName	1.3.6.1.4.1.562.36.2.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpV35ControlStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpV35CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT mscLpV35DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
C32 mscLpV35DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT mscLpV35DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
INT mscLpV35EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
INT mscLpV35IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpV35IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.9.13.1		not-accessible	An entry in the mscLpV35IfEntryTable.
mscLpV35IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpV35IfIndex	1.3.6.1.4.1.562.36.2.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpV35Index	1.3.6.1.4.1.562.36.2.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpV35 tables.
U32 mscLpV35LineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OCT mscLpV35LineState	1.3.6.1.4.1.562.36.2.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
U32 mscLpV35LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
INT mscLpV35LinkMode	1.3.6.1.4.1.562.36.2.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpV35OperationalState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpV35OperEntry	1.3.6.1.4.1.562.36.2.1.12.9.16.1		not-accessible	An entry in the mscLpV35OperTable.
mscLpV35OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.14.1		not-accessible	An entry in the mscLpV35OperStatusTable.
mscLpV35OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpV35OperTable	1.3.6.1.4.1.562.36.2.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
OCT mscLpV35ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpV35ProvEntry	1.3.6.1.4.1.562.36.2.1.12.9.10.1		not-accessible	An entry in the mscLpV35ProvTable.
mscLpV35ProvTable	1.3.6.1.4.1.562.36.2.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
OCT mscLpV35ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
ROW mscLpV35RowStatus	1.3.6.1.4.1.562.36.2.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpV35 components. These components can be added and deleted.
mscLpV35RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.1.1		not-accessible	A single entry in the table represents a single mscLpV35 component.
mscLpV35RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.1		not-accessible	This entry controls the addition and deletion of mscLpV35 components.
INT mscLpV35SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpV35StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpV35StateEntry	1.3.6.1.4.1.562.36.2.1.12.9.15.1		not-accessible	An entry in the mscLpV35StateTable.
mscLpV35StateTable	1.3.6.1.4.1.562.36.2.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpV35StorageType	1.3.6.1.4.1.562.36.2.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35 tables.
mscLpV35Test	1.3.6.1.4.1.562.36.2.1.12.9.2
INT mscLpV35TestAdminState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpV35TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpV35TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpV35TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpV35TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpV35TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpV35TestComponentName	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpV35TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpV35TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpV35TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpV35TestDuration	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpV35TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpV35TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpV35TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpV35TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpV35TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpV35TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpV35TestIndex	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpV35Test tables.
INT mscLpV35TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpV35TestPurpose	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpV35TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1		not-accessible	An entry in the mscLpV35TestResultsTable.
mscLpV35TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpV35TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpV35Test components. These components cannot be added nor deleted.
mscLpV35TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single mscLpV35Test component.
mscLpV35TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of mscLpV35Test components.
mscLpV35TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1		not-accessible	An entry in the mscLpV35TestSetupTable.
mscLpV35TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpV35TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1		not-accessible	An entry in the mscLpV35TestStateTable.
mscLpV35TestStateTable	1.3.6.1.4.1.562.36.2.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpV35TestStorageType	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35Test tables.
U32 mscLpV35TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpV35TestType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpV35TestUsageState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpV35UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpV35UsageState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpV35Vendor	1.3.6.1.4.1.562.36.2.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
mscLpX21	1.3.6.1.4.1.562.36.2.1.12.10
INT mscLpX21ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
G32 mscLpX21ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 mscLpX21ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
mscLpX21AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.10.12.1		not-accessible	An entry in the mscLpX21AdminInfoTable.
mscLpX21AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
INT mscLpX21AdminState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpX21AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
LIN mscLpX21ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
OCT mscLpX21AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
mscLpX21CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.10.11.1		not-accessible	An entry in the mscLpX21CidDataTable.
mscLpX21CidDataTable	1.3.6.1.4.1.562.36.2.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
INT mscLpX21ClockingSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
STR mscLpX21CommentText	1.3.6.1.4.1.562.36.2.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpX21ComponentName	1.3.6.1.4.1.562.36.2.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
OCT mscLpX21ControlStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
U32 mscLpX21CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
OCT mscLpX21DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
C32 mscLpX21DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
INT mscLpX21DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT mscLpX21EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
INT mscLpX21IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
mscLpX21IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.10.13.1		not-accessible	An entry in the mscLpX21IfEntryTable.
mscLpX21IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
NUM mscLpX21IfIndex	1.3.6.1.4.1.562.36.2.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
I32 mscLpX21Index	1.3.6.1.4.1.562.36.2.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpX21 tables.
U32 mscLpX21LineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
OCT mscLpX21LineState	1.3.6.1.4.1.562.36.2.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
U32 mscLpX21LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
INT mscLpX21LineTerminationRequired	1.3.6.1.4.1.562.36.2.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
INT mscLpX21LinkMode	1.3.6.1.4.1.562.36.2.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpX21OperationalState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
mscLpX21OperEntry	1.3.6.1.4.1.562.36.2.1.12.10.16.1		not-accessible	An entry in the mscLpX21OperTable.
mscLpX21OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.14.1		not-accessible	An entry in the mscLpX21OperStatusTable.
mscLpX21OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpX21OperTable	1.3.6.1.4.1.562.36.2.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
OCT mscLpX21ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
mscLpX21ProvEntry	1.3.6.1.4.1.562.36.2.1.12.10.10.1		not-accessible	An entry in the mscLpX21ProvTable.
mscLpX21ProvTable	1.3.6.1.4.1.562.36.2.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
OCT mscLpX21ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
ROW mscLpX21RowStatus	1.3.6.1.4.1.562.36.2.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpX21 components. These components can be added and deleted.
mscLpX21RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.1.1		not-accessible	A single entry in the table represents a single mscLpX21 component.
mscLpX21RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.1		not-accessible	This entry controls the addition and deletion of mscLpX21 components.
INT mscLpX21SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpX21StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
mscLpX21StateEntry	1.3.6.1.4.1.562.36.2.1.12.10.15.1		not-accessible	An entry in the mscLpX21StateTable.
mscLpX21StateTable	1.3.6.1.4.1.562.36.2.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
STO mscLpX21StorageType	1.3.6.1.4.1.562.36.2.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21 tables.
mscLpX21Test	1.3.6.1.4.1.562.36.2.1.12.10.2
INT mscLpX21TestAdminState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
STR mscLpX21TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
NUM mscLpX21TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpX21TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpX21TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
INT mscLpX21TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
STR mscLpX21TestComponentName	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
HEX mscLpX21TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpX21TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpX21TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpX21TestDuration	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
C32 mscLpX21TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
NUM mscLpX21TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
INT mscLpX21TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
NUM mscLpX21TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
U32 mscLpX21TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
NUM mscLpX21TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NON mscLpX21TestIndex	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpX21Test tables.
INT mscLpX21TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
STR mscLpX21TestPurpose	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
mscLpX21TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1		not-accessible	An entry in the mscLpX21TestResultsTable.
mscLpX21TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
ROW mscLpX21TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpX21Test components. These components cannot be added nor deleted.
mscLpX21TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single mscLpX21Test component.
mscLpX21TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of mscLpX21Test components.
mscLpX21TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1		not-accessible	An entry in the mscLpX21TestSetupTable.
mscLpX21TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpX21TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1		not-accessible	An entry in the mscLpX21TestStateTable.
mscLpX21TestStateTable	1.3.6.1.4.1.562.36.2.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
STO mscLpX21TestStorageType	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21Test tables.
U32 mscLpX21TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpX21TestType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpX21TestUsageState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpX21UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpX21UsageState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
STR mscLpX21Vendor	1.3.6.1.4.1.562.36.2.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.

OID symbolic	OID numeric	Type	Access	Description
mscLp	1.3.6.1.4.1.562.36.2.1.12
mscLpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.1		not-accessible	This entry controls the addition and deletion of mscLp components.
mscLpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.1.1		not-accessible	A single entry in the table represents a single mscLp component.
ROW mscLpRowStatus	1.3.6.1.4.1.562.36.2.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLp components. These components can be added and deleted.
STR mscLpComponentName	1.3.6.1.4.1.562.36.2.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpStorageType	1.3.6.1.4.1.562.36.2.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLp tables.
I32 mscLpIndex	1.3.6.1.4.1.562.36.2.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLp tables.
mscLpDS3	1.3.6.1.4.1.562.36.2.1.12.5
mscLpDS3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3 components.
mscLpDS3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3 component.
ROW mscLpDS3RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3 components. These components can be added and deleted.
STR mscLpDS3ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3StorageType	1.3.6.1.4.1.562.36.2.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3 tables.
I32 mscLpDS3Index	1.3.6.1.4.1.562.36.2.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3 tables.
mscLpDS3Test	1.3.6.1.4.1.562.36.2.1.12.5.2
mscLpDS3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Test components.
mscLpDS3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Test component.
ROW mscLpDS3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Test components. These components cannot be added nor deleted.
STR mscLpDS3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Test tables.
NON mscLpDS3TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Test tables.
mscLpDS3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1		not-accessible	An entry in the mscLpDS3TestStateTable.
INT mscLpDS3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpDS3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1		not-accessible	An entry in the mscLpDS3TestSetupTable.
STR mscLpDS3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpDS3TestType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpDS3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpDS3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpDS3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpDS3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1		not-accessible	An entry in the mscLpDS3TestResultsTable.
C32 mscLpDS3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpDS3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpDS3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpDS3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpDS3CBit	1.3.6.1.4.1.562.36.2.1.12.5.3
mscLpDS3CBitRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3CBit components.
mscLpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3CBit component.
ROW mscLpDS3CBitRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3CBit components. These components cannot be added nor deleted.
STR mscLpDS3CBitComponentName	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3CBitStorageType	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3CBit tables.
NON mscLpDS3CBitIndex	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3CBit tables.
mscLpDS3CBitOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
mscLpDS3CBitOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1		not-accessible	An entry in the mscLpDS3CBitOperationalTable.
INT mscLpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
OCT mscLpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT mscLpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
mscLpDS3CBitStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3CBitStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1		not-accessible	An entry in the mscLpDS3CBitStatsTable.
C32 mscLpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 mscLpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
C32 mscLpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 mscLpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 mscLpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
C32 mscLpDS3CBitFarEndFailures	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3Plcp	1.3.6.1.4.1.562.36.2.1.12.5.4
mscLpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Plcp components.
mscLpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Plcp component.
ROW mscLpDS3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Plcp components. These components cannot be added nor deleted.
STR mscLpDS3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Plcp tables.
NON mscLpDS3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Plcp tables.
mscLpDS3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
mscLpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1		not-accessible	An entry in the mscLpDS3PlcpOperationalTable.
INT mscLpDS3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
mscLpDS3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1		not-accessible	An entry in the mscLpDS3PlcpStatsTable.
C32 mscLpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpDS3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
mscLpDS3Cell	1.3.6.1.4.1.562.36.2.1.12.5.5
mscLpDS3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Cell components.
mscLpDS3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Cell component.
ROW mscLpDS3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3Cell components. These components can be added and deleted.
STR mscLpDS3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Cell tables.
NON mscLpDS3CellIndex	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Cell tables.
mscLpDS3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1		not-accessible	An entry in the mscLpDS3CellProvTable.
U32 mscLpDS3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpDS3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1		not-accessible	An entry in the mscLpDS3CellOperTable.
INT mscLpDS3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1		not-accessible	An entry in the mscLpDS3CellStatsTable.
C32 mscLpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpDS3DS1	1.3.6.1.4.1.562.36.2.1.12.5.6
mscLpDS3DS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1 components.
mscLpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1 component.
ROW mscLpDS3DS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1 components. These components can be added and deleted.
STR mscLpDS3DS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1StorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1 tables.
I32 mscLpDS3DS1Index	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1 tables.
mscLpDS3DS1Chan	1.3.6.1.4.1.562.36.2.1.12.5.6.2
mscLpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Chan components.
mscLpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Chan component.
ROW mscLpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1Chan components. These components can be added and deleted.
STR mscLpDS3DS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Chan tables.
I32 mscLpDS3DS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1Chan tables.
mscLpDS3DS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2
mscLpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTest components.
mscLpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTest component.
ROW mscLpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTest components. These components cannot be added nor deleted.
STR mscLpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTest tables.
NON mscLpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTest tables.
mscLpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTestStateTable.
INT mscLpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTestSetupTable.
STR mscLpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpDS3DS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanTestResultsTable.
C32 mscLpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpDS3DS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3
mscLpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanCell components.
mscLpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanCell component.
ROW mscLpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanCell components. These components can be added and deleted.
STR mscLpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanCell tables.
NON mscLpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanCell tables.
mscLpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1		not-accessible	An entry in the mscLpDS3DS1ChanCellProvTable.
U32 mscLpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCellOperTable.
INT mscLpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1		not-accessible	An entry in the mscLpDS3DS1ChanCellStatsTable.
C32 mscLpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpDS3DS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4
mscLpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTc components.
mscLpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTc component.
ROW mscLpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTc components. These components can be added and deleted.
STR mscLpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTc tables.
NON mscLpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTc tables.
mscLpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTcProvTable.
HEX mscLpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 mscLpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTcOpTable.
INT mscLpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
mscLpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigOneTable.
INT mscLpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigOneTable specific index for the mscLpDS3DS1ChanTcSigOneTable.
U32 mscLpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigOneTable.
mscLpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigTwoTable.
INT mscLpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigTwoTable specific index for the mscLpDS3DS1ChanTcSigTwoTable.
U32 mscLpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigTwoTable.
mscLpDS3DS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanProvTable.
OCT mscLpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN mscLpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
mscLpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCidDataTable.
U32 mscLpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanIfEntryTable.
INT mscLpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1		not-accessible	An entry in the mscLpDS3DS1ChanOperStatusTable.
INT mscLpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpDS3DS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1		not-accessible	An entry in the mscLpDS3DS1ChanStateTable.
INT mscLpDS3DS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpDS3DS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1		not-accessible	An entry in the mscLpDS3DS1ChanOperTable.
G32 mscLpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1		not-accessible	An entry in the mscLpDS3DS1ChanAdminInfoTable.
STR mscLpDS3DS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3DS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpDS3DS1Test	1.3.6.1.4.1.562.36.2.1.12.5.6.3
mscLpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Test components.
mscLpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Test component.
ROW mscLpDS3DS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1Test components. These components cannot be added nor deleted.
STR mscLpDS3DS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS3DS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Test tables.
NON mscLpDS3DS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1Test tables.
mscLpDS3DS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1		not-accessible	An entry in the mscLpDS3DS1TestStateTable.
INT mscLpDS3DS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3DS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3DS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpDS3DS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1		not-accessible	An entry in the mscLpDS3DS1TestSetupTable.
STR mscLpDS3DS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpDS3DS1TestType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpDS3DS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpDS3DS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1		not-accessible	An entry in the mscLpDS3DS1TestResultsTable.
C32 mscLpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpDS3DS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpDS3DS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
mscLpDS3DS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1		not-accessible	An entry in the mscLpDS3DS1ProvTable.
INT mscLpDS3DS1LineType	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. For the 4pDS3ChAtm card, only d4 and esf framing patterns are permitted.
INT mscLpDS3DS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
INT mscLpDS3DS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal or 4pDS3ChAtm card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local. On a 4pDS3ChAtm card the clocking source for all DS1 and all DS3 components on card must be the same, except when a DS1 is using line as a clocking source.
mscLpDS3DS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3DS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1		not-accessible	An entry in the mscLpDS3DS1CidDataTable.
U32 mscLpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1		not-accessible	An entry in the mscLpDS3DS1AdminInfoTable.
STR mscLpDS3DS1Vendor	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3DS1CommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpDS3DS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1		not-accessible	An entry in the mscLpDS3DS1IfEntryTable.
INT mscLpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpDS3DS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpDS3DS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1		not-accessible	An entry in the mscLpDS3DS1OperStatusTable.
INT mscLpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpDS3DS1StateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1		not-accessible	An entry in the mscLpDS3DS1StateTable.
INT mscLpDS3DS1AdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1UsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3DS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3DS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpDS3DS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3DS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpDS3DS1OperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpDS3DS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1		not-accessible	An entry in the mscLpDS3DS1OperTable.
INT mscLpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT mscLpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
mscLpDS3DS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpDS3DS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1		not-accessible	An entry in the mscLpDS3DS1StatsTable.
C32 mscLpDS3DS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
C32 mscLpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 mscLpDS3DS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS3DS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS3DS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpDS3DS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
C32 mscLpDS3DS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
C32 mscLpDS3DS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
mscLpDS3ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
mscLpDS3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.10.1		not-accessible	An entry in the mscLpDS3ProvTable.
INT mscLpDS3CbitParity	1.3.6.1.4.1.562.36.2.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
U32 mscLpDS3LineLength	1.3.6.1.4.1.562.36.2.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
INT mscLpDS3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. If there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
LIN mscLpDS3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
INT mscLpDS3Mapping	1.3.6.1.4.1.562.36.2.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
mscLpDS3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.11.1		not-accessible	An entry in the mscLpDS3CidDataTable.
U32 mscLpDS3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.12.1		not-accessible	An entry in the mscLpDS3AdminInfoTable.
STR mscLpDS3Vendor	1.3.6.1.4.1.562.36.2.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3CommentText	1.3.6.1.4.1.562.36.2.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpDS3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.13.1		not-accessible	An entry in the mscLpDS3IfEntryTable.
INT mscLpDS3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpDS3IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpDS3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.14.1		not-accessible	An entry in the mscLpDS3OperStatusTable.
INT mscLpDS3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpDS3StateTable	1.3.6.1.4.1.562.36.2.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.15.1		not-accessible	An entry in the mscLpDS3StateTable.
INT mscLpDS3AdminState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3UsageState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpDS3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpDS3OperTable	1.3.6.1.4.1.562.36.2.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
mscLpDS3OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.16.1		not-accessible	An entry in the mscLpDS3OperTable.
INT mscLpDS3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3RxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT mscLpDS3TxAis	1.3.6.1.4.1.562.36.2.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT mscLpDS3TxRai	1.3.6.1.4.1.562.36.2.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT mscLpDS3TxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
mscLpDS3StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.17.1		not-accessible	An entry in the mscLpDS3StatsTable.
C32 mscLpDS3RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
C32 mscLpDS3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
C32 mscLpDS3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 mscLpDS3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
C32 mscLpDS3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpDS3LineFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
C32 mscLpDS3PathFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3	1.3.6.1.4.1.562.36.2.1.12.6
mscLpE3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.1		not-accessible	This entry controls the addition and deletion of mscLpE3 components.
mscLpE3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.1.1		not-accessible	A single entry in the table represents a single mscLpE3 component.
ROW mscLpE3RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3 components. These components can be added and deleted.
STR mscLpE3ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE3StorageType	1.3.6.1.4.1.562.36.2.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3 tables.
I32 mscLpE3Index	1.3.6.1.4.1.562.36.2.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE3 tables.
mscLpE3Test	1.3.6.1.4.1.562.36.2.1.12.6.2
mscLpE3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpE3Test components.
mscLpE3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpE3Test component.
ROW mscLpE3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Test components. These components cannot be added nor deleted.
STR mscLpE3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Test tables.
NON mscLpE3TestIndex	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Test tables.
mscLpE3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1		not-accessible	An entry in the mscLpE3TestStateTable.
INT mscLpE3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpE3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1		not-accessible	An entry in the mscLpE3TestSetupTable.
STR mscLpE3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpE3TestType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpE3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpE3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpE3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE3TestDuration	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpE3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1		not-accessible	An entry in the mscLpE3TestResultsTable.
C32 mscLpE3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpE3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpE3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpE3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpE3G832	1.3.6.1.4.1.562.36.2.1.12.6.3
mscLpE3G832RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpE3G832 components.
mscLpE3G832RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpE3G832 component.
ROW mscLpE3G832RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3G832 components. These components can be added and deleted.
STR mscLpE3G832ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE3G832StorageType	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3G832 tables.
NON mscLpE3G832Index	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3G832 tables.
mscLpE3G832ProvisionedTable	1.3.6.1.4.1.562.36.2.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
mscLpE3G832ProvisionedEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1		not-accessible	An entry in the mscLpE3G832ProvisionedTable.
STR mscLpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR mscLpE3G832TrailTraceExpected	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
mscLpE3G832OperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
mscLpE3G832OperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1		not-accessible	An entry in the mscLpE3G832OperationalTable.
INT mscLpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT mscLpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
INT mscLpE3G832TimingMarker	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
STR mscLpE3G832TrailTraceReceived	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
mscLpE3G832StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3G832StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1		not-accessible	An entry in the mscLpE3G832StatsTable.
C32 mscLpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 mscLpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3G832FarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 mscLpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
mscLpE3Plcp	1.3.6.1.4.1.562.36.2.1.12.6.4
mscLpE3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of mscLpE3Plcp components.
mscLpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single mscLpE3Plcp component.
ROW mscLpE3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Plcp components. These components cannot be added nor deleted.
STR mscLpE3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Plcp tables.
NON mscLpE3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Plcp tables.
mscLpE3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
mscLpE3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1		not-accessible	An entry in the mscLpE3PlcpOperationalTable.
INT mscLpE3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
mscLpE3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1		not-accessible	An entry in the mscLpE3PlcpStatsTable.
C32 mscLpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpE3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
mscLpE3Cell	1.3.6.1.4.1.562.36.2.1.12.6.5
mscLpE3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of mscLpE3Cell components.
mscLpE3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single mscLpE3Cell component.
ROW mscLpE3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3Cell components. These components can be added and deleted.
STR mscLpE3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Cell tables.
NON mscLpE3CellIndex	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Cell tables.
mscLpE3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpE3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1		not-accessible	An entry in the mscLpE3CellProvTable.
U32 mscLpE3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpE3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpE3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1		not-accessible	An entry in the mscLpE3CellOperTable.
INT mscLpE3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpE3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1		not-accessible	An entry in the mscLpE3CellStatsTable.
C32 mscLpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpE3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpE3ProvTable	1.3.6.1.4.1.562.36.2.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
mscLpE3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.10.1		not-accessible	An entry in the mscLpE3ProvTable.
U32 mscLpE3LineLength	1.3.6.1.4.1.562.36.2.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
INT mscLpE3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
LIN mscLpE3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
INT mscLpE3Mapping	1.3.6.1.4.1.562.36.2.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT mscLpE3Framing	1.3.6.1.4.1.562.36.2.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
U32 mscLpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.36.2.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 mscLpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.36.2.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
mscLpE3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.6.11.1		not-accessible	An entry in the mscLpE3CidDataTable.
U32 mscLpE3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpE3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.6.12.1		not-accessible	An entry in the mscLpE3AdminInfoTable.
STR mscLpE3Vendor	1.3.6.1.4.1.562.36.2.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE3CommentText	1.3.6.1.4.1.562.36.2.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpE3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.6.13.1		not-accessible	An entry in the mscLpE3IfEntryTable.
INT mscLpE3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpE3IfIndex	1.3.6.1.4.1.562.36.2.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpE3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.14.1		not-accessible	An entry in the mscLpE3OperStatusTable.
INT mscLpE3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpE3StateTable	1.3.6.1.4.1.562.36.2.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE3StateEntry	1.3.6.1.4.1.562.36.2.1.12.6.15.1		not-accessible	An entry in the mscLpE3StateTable.
INT mscLpE3AdminState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE3OperationalState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE3UsageState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpE3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpE3OperTable	1.3.6.1.4.1.562.36.2.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
mscLpE3OperEntry	1.3.6.1.4.1.562.36.2.1.12.6.16.1		not-accessible	An entry in the mscLpE3OperTable.
INT mscLpE3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3TxAis	1.3.6.1.4.1.562.36.2.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT mscLpE3TxRai	1.3.6.1.4.1.562.36.2.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
mscLpE3StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.17.1		not-accessible	An entry in the mscLpE3StatsTable.
C32 mscLpE3RunningTime	1.3.6.1.4.1.562.36.2.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
C32 mscLpE3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
C32 mscLpE3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 mscLpE3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
C32 mscLpE3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 mscLpE3LineFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpE3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
C32 mscLpE3PathFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS1	1.3.6.1.4.1.562.36.2.1.12.7
mscLpDS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.1		not-accessible	This entry controls the addition and deletion of mscLpDS1 components.
mscLpDS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.1.1		not-accessible	A single entry in the table represents a single mscLpDS1 component.
ROW mscLpDS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1 components. These components can be added and deleted.
STR mscLpDS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1StorageType	1.3.6.1.4.1.562.36.2.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1 tables.
I32 mscLpDS1Index	1.3.6.1.4.1.562.36.2.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1 tables.
mscLpDS1Chan	1.3.6.1.4.1.562.36.2.1.12.7.2
mscLpDS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Chan components.
mscLpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Chan component.
ROW mscLpDS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1Chan components. These components can be added and deleted.
STR mscLpDS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Chan tables.
I32 mscLpDS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1Chan tables.
mscLpDS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.7.2.2
mscLpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTest components.
mscLpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTest component.
ROW mscLpDS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1ChanTest components. These components cannot be added nor deleted.
STR mscLpDS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTest tables.
NON mscLpDS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTest tables.
mscLpDS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1		not-accessible	An entry in the mscLpDS1ChanTestStateTable.
INT mscLpDS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpDS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1		not-accessible	An entry in the mscLpDS1ChanTestSetupTable.
STR mscLpDS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpDS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpDS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpDS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1		not-accessible	An entry in the mscLpDS1ChanTestResultsTable.
C32 mscLpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpDS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpDS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.7.2.3
mscLpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanCell components.
mscLpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanCell component.
ROW mscLpDS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanCell components. These components can be added and deleted.
STR mscLpDS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanCell tables.
NON mscLpDS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanCell tables.
mscLpDS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1		not-accessible	An entry in the mscLpDS1ChanCellProvTable.
U32 mscLpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpDS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1		not-accessible	An entry in the mscLpDS1ChanCellOperTable.
INT mscLpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpDS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1		not-accessible	An entry in the mscLpDS1ChanCellStatsTable.
C32 mscLpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpDS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.7.2.4
mscLpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTc components.
mscLpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTc component.
ROW mscLpDS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanTc components. These components can be added and deleted.
STR mscLpDS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTc tables.
NON mscLpDS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTc tables.
mscLpDS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpDS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1		not-accessible	An entry in the mscLpDS1ChanTcProvTable.
HEX mscLpDS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 mscLpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpDS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1		not-accessible	An entry in the mscLpDS1ChanTcOpTable.
INT mscLpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
mscLpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1		not-accessible	An entry in the mscLpDS1ChanTcSigOneTable.
INT mscLpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigOneTable specific index for the mscLpDS1ChanTcSigOneTable.
U32 mscLpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigOneTable.
mscLpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1		not-accessible	An entry in the mscLpDS1ChanTcSigTwoTable.
INT mscLpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigTwoTable specific index for the mscLpDS1ChanTcSigTwoTable.
U32 mscLpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigTwoTable.
mscLpDS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpDS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1		not-accessible	An entry in the mscLpDS1ChanProvTable.
OCT mscLpDS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN mscLpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
mscLpDS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1		not-accessible	An entry in the mscLpDS1ChanCidDataTable.
U32 mscLpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1		not-accessible	An entry in the mscLpDS1ChanIfEntryTable.
INT mscLpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpDS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpDS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1		not-accessible	An entry in the mscLpDS1ChanOperStatusTable.
INT mscLpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpDS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1		not-accessible	An entry in the mscLpDS1ChanStateTable.
INT mscLpDS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpDS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpDS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpDS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1		not-accessible	An entry in the mscLpDS1ChanOperTable.
G32 mscLpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1		not-accessible	An entry in the mscLpDS1ChanAdminInfoTable.
STR mscLpDS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpDS1Test	1.3.6.1.4.1.562.36.2.1.12.7.3
mscLpDS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Test components.
mscLpDS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Test component.
ROW mscLpDS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Test components. These components cannot be added nor deleted.
STR mscLpDS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Test tables.
NON mscLpDS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Test tables.
mscLpDS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1		not-accessible	An entry in the mscLpDS1TestStateTable.
INT mscLpDS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpDS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1		not-accessible	An entry in the mscLpDS1TestSetupTable.
STR mscLpDS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpDS1TestType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpDS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpDS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpDS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpDS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpDS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1		not-accessible	An entry in the mscLpDS1TestResultsTable.
C32 mscLpDS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpDS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpDS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpDS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpDS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpDS1Dsp	1.3.6.1.4.1.562.36.2.1.12.7.4
mscLpDS1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Dsp components.
mscLpDS1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Dsp component.
ROW mscLpDS1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Dsp components. These components cannot be added nor deleted.
STR mscLpDS1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Dsp tables.
NON mscLpDS1DspIndex	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Dsp tables.
mscLpDS1Audio	1.3.6.1.4.1.562.36.2.1.12.7.5
mscLpDS1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Audio components.
mscLpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Audio component.
ROW mscLpDS1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Audio components. These components cannot be added nor deleted.
STR mscLpDS1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpDS1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Audio tables.
NON mscLpDS1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Audio tables.
mscLpDS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
mscLpDS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.10.1		not-accessible	An entry in the mscLpDS1ProvTable.
INT mscLpDS1LineType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT mscLpDS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
INT mscLpDS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pDS1Atm card, which it defaults to local. On a 3pDS1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4DS1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT mscLpDS1RaiAlarmType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
U32 mscLpDS1LineLength	1.3.6.1.4.1.562.36.2.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
mscLpDS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.11.1		not-accessible	An entry in the mscLpDS1CidDataTable.
U32 mscLpDS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpDS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.12.1		not-accessible	An entry in the mscLpDS1AdminInfoTable.
STR mscLpDS1Vendor	1.3.6.1.4.1.562.36.2.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS1CommentText	1.3.6.1.4.1.562.36.2.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpDS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.13.1		not-accessible	An entry in the mscLpDS1IfEntryTable.
INT mscLpDS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpDS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpDS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.14.1		not-accessible	An entry in the mscLpDS1OperStatusTable.
INT mscLpDS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpDS1StateTable	1.3.6.1.4.1.562.36.2.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.7.15.1		not-accessible	An entry in the mscLpDS1StateTable.
INT mscLpDS1AdminState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1UsageState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpDS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpDS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpDS1OperTable	1.3.6.1.4.1.562.36.2.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpDS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.7.16.1		not-accessible	An entry in the mscLpDS1OperTable.
INT mscLpDS1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpDS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpDS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
mscLpDS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpDS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.17.1		not-accessible	An entry in the mscLpDS1StatsTable.
C32 mscLpDS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 mscLpDS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpDS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpDS1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 mscLpDS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 mscLpDS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 mscLpDS1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 mscLpDS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
mscLpE1	1.3.6.1.4.1.562.36.2.1.12.8
mscLpE1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.1		not-accessible	This entry controls the addition and deletion of mscLpE1 components.
mscLpE1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.1.1		not-accessible	A single entry in the table represents a single mscLpE1 component.
ROW mscLpE1RowStatus	1.3.6.1.4.1.562.36.2.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1 components. These components can be added and deleted.
STR mscLpE1ComponentName	1.3.6.1.4.1.562.36.2.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1StorageType	1.3.6.1.4.1.562.36.2.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1 tables.
I32 mscLpE1Index	1.3.6.1.4.1.562.36.2.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1 tables.
mscLpE1Chan	1.3.6.1.4.1.562.36.2.1.12.8.2
mscLpE1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1Chan components.
mscLpE1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1Chan component.
ROW mscLpE1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1Chan components. These components can be added and deleted.
STR mscLpE1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Chan tables.
I32 mscLpE1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1Chan tables.
mscLpE1ChanTest	1.3.6.1.4.1.562.36.2.1.12.8.2.2
mscLpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTest components.
mscLpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTest component.
ROW mscLpE1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1ChanTest components. These components cannot be added nor deleted.
STR mscLpE1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTest tables.
NON mscLpE1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTest tables.
mscLpE1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1		not-accessible	An entry in the mscLpE1ChanTestStateTable.
INT mscLpE1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpE1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1		not-accessible	An entry in the mscLpE1ChanTestSetupTable.
STR mscLpE1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpE1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpE1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpE1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1		not-accessible	An entry in the mscLpE1ChanTestResultsTable.
C32 mscLpE1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpE1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpE1ChanCell	1.3.6.1.4.1.562.36.2.1.12.8.2.3
mscLpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanCell components.
mscLpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanCell component.
ROW mscLpE1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanCell components. These components can be added and deleted.
STR mscLpE1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanCell tables.
NON mscLpE1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanCell tables.
mscLpE1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpE1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1		not-accessible	An entry in the mscLpE1ChanCellProvTable.
U32 mscLpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpE1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1		not-accessible	An entry in the mscLpE1ChanCellOperTable.
INT mscLpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpE1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1		not-accessible	An entry in the mscLpE1ChanCellStatsTable.
C32 mscLpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpE1ChanTc	1.3.6.1.4.1.562.36.2.1.12.8.2.4
mscLpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTc components.
mscLpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTc component.
ROW mscLpE1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanTc components. These components can be added and deleted.
STR mscLpE1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTc tables.
NON mscLpE1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTc tables.
mscLpE1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpE1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1		not-accessible	An entry in the mscLpE1ChanTcProvTable.
HEX mscLpE1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
U32 mscLpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
mscLpE1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpE1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1		not-accessible	An entry in the mscLpE1ChanTcOpTable.
INT mscLpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
mscLpE1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1		not-accessible	An entry in the mscLpE1ChanTcSigOneTable.
INT mscLpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigOneTable specific index for the mscLpE1ChanTcSigOneTable.
U32 mscLpE1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigOneTable.
mscLpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1		not-accessible	An entry in the mscLpE1ChanTcSigTwoTable.
INT mscLpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigTwoTable specific index for the mscLpE1ChanTcSigTwoTable.
U32 mscLpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigTwoTable.
mscLpE1ChanFlm	1.3.6.1.4.1.562.36.2.1.12.8.2.5
mscLpE1ChanFlmRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanFlm components.
mscLpE1ChanFlmRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanFlm component.
ROW mscLpE1ChanFlmRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanFlm components. These components can be added and deleted.
STR mscLpE1ChanFlmComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1ChanFlmStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanFlm tables.
NON mscLpE1ChanFlmIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanFlm tables.
mscLpE1ChanFlmProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10		not-accessible	This group contains all specific provisioning data for an Flm component.
mscLpE1ChanFlmProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1		not-accessible	An entry in the mscLpE1ChanFlmProvTable.
INT mscLpE1ChanFlmABitMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1	INTEGER	read-write	This attribute controls the monitoring of A-bit defects.
INT mscLpE1ChanFlmHdlcMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2	INTEGER	read-write	This attribute controls the monitoring of HDLC defect.
mscLpE1ChanFlmOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11		not-accessible	This group contains all specific operational data for an Flm component.
mscLpE1ChanFlmOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1		not-accessible	An entry in the mscLpE1ChanFlmOpTable.
INT mscLpE1ChanFlmFlmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1	INTEGER	read-only	This attribute indicates the status of a Frame Relay channel on an E1 line. By combining the E1 channel-associated-signalling (CAS) A-bits status, and HDLC defect, a single value indicates the likely cause of the failure. This mechanism assumes that the far end equipment loops back signaling A-bits for some or all of the timeslots in a channel. The A-bits in channel are transmitted as '0'. If they are all received as '0', it is assumed that the E1 link is up in both directions. The presence of HDLC frames indicates that the service is connected. When A-bits and HDLC frames are correctly received, frameLinkUp is indicated. When neither are received, frameLinkDown is indicated. When HDLC frames are not receive but A-bits are not at fault, lossOfHdlc is indicated. When HDLC frames are received, but there is a fault in the any of timeslot's A-bits on a channel lossOfAbit is indicated.
mscLpE1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpE1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1		not-accessible	An entry in the mscLpE1ChanProvTable.
OCT mscLpE1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
INT mscLpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
LIN mscLpE1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
mscLpE1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1		not-accessible	An entry in the mscLpE1ChanCidDataTable.
U32 mscLpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpE1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1		not-accessible	An entry in the mscLpE1ChanIfEntryTable.
INT mscLpE1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpE1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpE1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1		not-accessible	An entry in the mscLpE1ChanOperStatusTable.
INT mscLpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpE1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1		not-accessible	An entry in the mscLpE1ChanStateTable.
INT mscLpE1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpE1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpE1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpE1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1		not-accessible	An entry in the mscLpE1ChanOperTable.
G32 mscLpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
mscLpE1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1		not-accessible	An entry in the mscLpE1ChanAdminInfoTable.
STR mscLpE1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpE1Test	1.3.6.1.4.1.562.36.2.1.12.8.3
mscLpE1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1Test components.
mscLpE1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1Test component.
ROW mscLpE1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Test components. These components cannot be added nor deleted.
STR mscLpE1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Test tables.
NON mscLpE1TestIndex	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Test tables.
mscLpE1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1		not-accessible	An entry in the mscLpE1TestStateTable.
INT mscLpE1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpE1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1		not-accessible	An entry in the mscLpE1TestSetupTable.
STR mscLpE1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpE1TestType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpE1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpE1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpE1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpE1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1TestDuration	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpE1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1		not-accessible	An entry in the mscLpE1TestResultsTable.
C32 mscLpE1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpE1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpE1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpE1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpE1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpE1Dsp	1.3.6.1.4.1.562.36.2.1.12.8.4
mscLpE1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1Dsp components.
mscLpE1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1Dsp component.
ROW mscLpE1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Dsp components. These components cannot be added nor deleted.
STR mscLpE1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Dsp tables.
NON mscLpE1DspIndex	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Dsp tables.
mscLpE1Audio	1.3.6.1.4.1.562.36.2.1.12.8.5
mscLpE1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1Audio components.
mscLpE1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1Audio component.
ROW mscLpE1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Audio components. These components cannot be added nor deleted.
STR mscLpE1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpE1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Audio tables.
NON mscLpE1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Audio tables.
mscLpE1ProvTable	1.3.6.1.4.1.562.36.2.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
mscLpE1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.10.1		not-accessible	An entry in the mscLpE1ProvTable.
INT mscLpE1LineType	1.3.6.1.4.1.562.36.2.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT mscLpE1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT mscLpE1Crc4Mode	1.3.6.1.4.1.562.36.2.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
INT mscLpE1SendRaiOnAis	1.3.6.1.4.1.562.36.2.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
U32 mscLpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 mscLpE1RaiClearAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
mscLpE1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.11.1		not-accessible	An entry in the mscLpE1CidDataTable.
U32 mscLpE1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpE1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.12.1		not-accessible	An entry in the mscLpE1AdminInfoTable.
STR mscLpE1Vendor	1.3.6.1.4.1.562.36.2.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE1CommentText	1.3.6.1.4.1.562.36.2.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpE1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.13.1		not-accessible	An entry in the mscLpE1IfEntryTable.
INT mscLpE1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpE1IfIndex	1.3.6.1.4.1.562.36.2.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpE1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.14.1		not-accessible	An entry in the mscLpE1OperStatusTable.
INT mscLpE1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpE1StateTable	1.3.6.1.4.1.562.36.2.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE1StateEntry	1.3.6.1.4.1.562.36.2.1.12.8.15.1		not-accessible	An entry in the mscLpE1StateTable.
INT mscLpE1AdminState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1OperationalState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1UsageState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpE1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpE1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpE1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpE1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.16.1		not-accessible	An entry in the mscLpE1OperTable.
INT mscLpE1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpE1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpE1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpE1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpE1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpE1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
mscLpE1E1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
mscLpE1E1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.17.1		not-accessible	An entry in the mscLpE1E1OperTable.
INT mscLpE1MultifrmLofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT mscLpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT mscLpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
mscLpE1StatsTable	1.3.6.1.4.1.562.36.2.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpE1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.18.1		not-accessible	An entry in the mscLpE1StatsTable.
C32 mscLpE1RunningTime	1.3.6.1.4.1.562.36.2.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 mscLpE1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpE1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpE1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpE1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpE1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpE1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 mscLpE1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 mscLpE1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 mscLpE1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 mscLpE1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
mscLpV35	1.3.6.1.4.1.562.36.2.1.12.9
mscLpV35RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.1		not-accessible	This entry controls the addition and deletion of mscLpV35 components.
mscLpV35RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.1.1		not-accessible	A single entry in the table represents a single mscLpV35 component.
ROW mscLpV35RowStatus	1.3.6.1.4.1.562.36.2.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpV35 components. These components can be added and deleted.
STR mscLpV35ComponentName	1.3.6.1.4.1.562.36.2.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpV35StorageType	1.3.6.1.4.1.562.36.2.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35 tables.
I32 mscLpV35Index	1.3.6.1.4.1.562.36.2.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpV35 tables.
mscLpV35Test	1.3.6.1.4.1.562.36.2.1.12.9.2
mscLpV35TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of mscLpV35Test components.
mscLpV35TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single mscLpV35Test component.
ROW mscLpV35TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpV35Test components. These components cannot be added nor deleted.
STR mscLpV35TestComponentName	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpV35TestStorageType	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35Test tables.
NON mscLpV35TestIndex	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpV35Test tables.
mscLpV35TestStateTable	1.3.6.1.4.1.562.36.2.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpV35TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1		not-accessible	An entry in the mscLpV35TestStateTable.
INT mscLpV35TestAdminState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpV35TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpV35TestUsageState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpV35TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpV35TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1		not-accessible	An entry in the mscLpV35TestSetupTable.
STR mscLpV35TestPurpose	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpV35TestType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpV35TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpV35TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpV35TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpV35TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpV35TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpV35TestDuration	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpV35TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpV35TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1		not-accessible	An entry in the mscLpV35TestResultsTable.
C32 mscLpV35TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpV35TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpV35TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpV35TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpV35TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpV35TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpV35TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpV35TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpV35TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpV35ProvTable	1.3.6.1.4.1.562.36.2.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
mscLpV35ProvEntry	1.3.6.1.4.1.562.36.2.1.12.9.10.1		not-accessible	An entry in the mscLpV35ProvTable.
INT mscLpV35LinkMode	1.3.6.1.4.1.562.36.2.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
OCT mscLpV35ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT mscLpV35DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
U32 mscLpV35LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
U32 mscLpV35LineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
INT mscLpV35ClockingSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT mscLpV35DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
LIN mscLpV35ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
INT mscLpV35EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
mscLpV35CidDataTable	1.3.6.1.4.1.562.36.2.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpV35CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.9.11.1		not-accessible	An entry in the mscLpV35CidDataTable.
U32 mscLpV35CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpV35AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpV35AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.9.12.1		not-accessible	An entry in the mscLpV35AdminInfoTable.
STR mscLpV35Vendor	1.3.6.1.4.1.562.36.2.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpV35CommentText	1.3.6.1.4.1.562.36.2.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpV35IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpV35IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.9.13.1		not-accessible	An entry in the mscLpV35IfEntryTable.
INT mscLpV35IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpV35IfIndex	1.3.6.1.4.1.562.36.2.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpV35OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpV35OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.14.1		not-accessible	An entry in the mscLpV35OperStatusTable.
INT mscLpV35SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpV35StateTable	1.3.6.1.4.1.562.36.2.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpV35StateEntry	1.3.6.1.4.1.562.36.2.1.12.9.15.1		not-accessible	An entry in the mscLpV35StateTable.
INT mscLpV35AdminState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpV35OperationalState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpV35UsageState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpV35AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpV35ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpV35ControlStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpV35AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpV35StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpV35UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpV35OperTable	1.3.6.1.4.1.562.36.2.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
mscLpV35OperEntry	1.3.6.1.4.1.562.36.2.1.12.9.16.1		not-accessible	An entry in the mscLpV35OperTable.
INT mscLpV35ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OCT mscLpV35LineState	1.3.6.1.4.1.562.36.2.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
G32 mscLpV35ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 mscLpV35ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
C32 mscLpV35DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
mscLpX21	1.3.6.1.4.1.562.36.2.1.12.10
mscLpX21RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.1		not-accessible	This entry controls the addition and deletion of mscLpX21 components.
mscLpX21RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.1.1		not-accessible	A single entry in the table represents a single mscLpX21 component.
ROW mscLpX21RowStatus	1.3.6.1.4.1.562.36.2.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpX21 components. These components can be added and deleted.
STR mscLpX21ComponentName	1.3.6.1.4.1.562.36.2.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpX21StorageType	1.3.6.1.4.1.562.36.2.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21 tables.
I32 mscLpX21Index	1.3.6.1.4.1.562.36.2.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpX21 tables.
mscLpX21Test	1.3.6.1.4.1.562.36.2.1.12.10.2
mscLpX21TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of mscLpX21Test components.
mscLpX21TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single mscLpX21Test component.
ROW mscLpX21TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpX21Test components. These components cannot be added nor deleted.
STR mscLpX21TestComponentName	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpX21TestStorageType	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21Test tables.
NON mscLpX21TestIndex	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpX21Test tables.
mscLpX21TestStateTable	1.3.6.1.4.1.562.36.2.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpX21TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1		not-accessible	An entry in the mscLpX21TestStateTable.
INT mscLpX21TestAdminState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpX21TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpX21TestUsageState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpX21TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpX21TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1		not-accessible	An entry in the mscLpX21TestSetupTable.
STR mscLpX21TestPurpose	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpX21TestType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpX21TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpX21TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpX21TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpX21TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpX21TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpX21TestDuration	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpX21TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpX21TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1		not-accessible	An entry in the mscLpX21TestResultsTable.
C32 mscLpX21TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpX21TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpX21TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpX21TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpX21TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpX21TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpX21TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpX21TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpX21TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpX21ProvTable	1.3.6.1.4.1.562.36.2.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
mscLpX21ProvEntry	1.3.6.1.4.1.562.36.2.1.12.10.10.1		not-accessible	An entry in the mscLpX21ProvTable.
INT mscLpX21LinkMode	1.3.6.1.4.1.562.36.2.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
OCT mscLpX21ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
OCT mscLpX21DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
U32 mscLpX21LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
U32 mscLpX21LineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
INT mscLpX21ClockingSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT mscLpX21DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT mscLpX21LineTerminationRequired	1.3.6.1.4.1.562.36.2.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
LIN mscLpX21ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
INT mscLpX21EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
mscLpX21CidDataTable	1.3.6.1.4.1.562.36.2.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpX21CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.10.11.1		not-accessible	An entry in the mscLpX21CidDataTable.
U32 mscLpX21CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpX21AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpX21AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.10.12.1		not-accessible	An entry in the mscLpX21AdminInfoTable.
STR mscLpX21Vendor	1.3.6.1.4.1.562.36.2.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpX21CommentText	1.3.6.1.4.1.562.36.2.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpX21IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpX21IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.10.13.1		not-accessible	An entry in the mscLpX21IfEntryTable.
INT mscLpX21IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpX21IfIndex	1.3.6.1.4.1.562.36.2.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpX21OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpX21OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.14.1		not-accessible	An entry in the mscLpX21OperStatusTable.
INT mscLpX21SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpX21StateTable	1.3.6.1.4.1.562.36.2.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpX21StateEntry	1.3.6.1.4.1.562.36.2.1.12.10.15.1		not-accessible	An entry in the mscLpX21StateTable.
INT mscLpX21AdminState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpX21OperationalState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpX21UsageState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpX21AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpX21ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpX21ControlStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpX21AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpX21StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpX21UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpX21OperTable	1.3.6.1.4.1.562.36.2.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
mscLpX21OperEntry	1.3.6.1.4.1.562.36.2.1.12.10.16.1		not-accessible	An entry in the mscLpX21OperTable.
INT mscLpX21ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
OCT mscLpX21LineState	1.3.6.1.4.1.562.36.2.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
G32 mscLpX21ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 mscLpX21ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
C32 mscLpX21DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
mscLpSonet	1.3.6.1.4.1.562.36.2.1.12.14
mscLpSonetRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.1		not-accessible	This entry controls the addition and deletion of mscLpSonet components.
mscLpSonetRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.1.1		not-accessible	A single entry in the table represents a single mscLpSonet component.
ROW mscLpSonetRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonet components. These components can be added and deleted.
STR mscLpSonetComponentName	1.3.6.1.4.1.562.36.2.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSonetStorageType	1.3.6.1.4.1.562.36.2.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonet tables.
I32 mscLpSonetIndex	1.3.6.1.4.1.562.36.2.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonet tables.
mscLpSonetPath	1.3.6.1.4.1.562.36.2.1.12.14.2
mscLpSonetPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPath components.
mscLpSonetPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPath component.
ROW mscLpSonetPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonetPath components. These components can be added and deleted.
STR mscLpSonetPathComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSonetPathStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPath tables.
I32 mscLpSonetPathIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonetPath tables.
mscLpSonetPathCell	1.3.6.1.4.1.562.36.2.1.12.14.2.2
mscLpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPathCell components.
mscLpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPathCell component.
ROW mscLpSonetPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetPathCell components. These components cannot be added nor deleted.
STR mscLpSonetPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSonetPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPathCell tables.
NON mscLpSonetPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetPathCell tables.
mscLpSonetPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpSonetPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1		not-accessible	An entry in the mscLpSonetPathCellProvTable.
U32 mscLpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpSonetPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSonetPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1		not-accessible	An entry in the mscLpSonetPathCellOperTable.
INT mscLpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpSonetPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1		not-accessible	An entry in the mscLpSonetPathCellStatsTable.
C32 mscLpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpSonetPathProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
mscLpSonetPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1		not-accessible	An entry in the mscLpSonetPathProvTable.
LIN mscLpSonetPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
mscLpSonetPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSonetPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1		not-accessible	An entry in the mscLpSonetPathCidDataTable.
U32 mscLpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpSonetPathStateTable	1.3.6.1.4.1.562.36.2.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1		not-accessible	An entry in the mscLpSonetPathStateTable.
INT mscLpSonetPathAdminState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetPathUsageState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSonetPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSonetPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSonetPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpSonetPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSonetPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpSonetPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSonetPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1		not-accessible	An entry in the mscLpSonetPathIfEntryTable.
INT mscLpSonetPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpSonetPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpSonetPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1		not-accessible	An entry in the mscLpSonetPathOperStatusTable.
INT mscLpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpSonetPathOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
mscLpSonetPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1		not-accessible	An entry in the mscLpSonetPathOperTable.
INT mscLpSonetPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathTxAis	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
mscLpSonetPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1		not-accessible	An entry in the mscLpSonetPathStatsTable.
C32 mscLpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSonetPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 mscLpSonetPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 mscLpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
mscLpSonetTest	1.3.6.1.4.1.562.36.2.1.12.14.3
mscLpSonetTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of mscLpSonetTest components.
mscLpSonetTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single mscLpSonetTest component.
ROW mscLpSonetTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetTest components. These components cannot be added nor deleted.
STR mscLpSonetTestComponentName	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSonetTestStorageType	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetTest tables.
NON mscLpSonetTestIndex	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetTest tables.
mscLpSonetTestStateTable	1.3.6.1.4.1.562.36.2.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpSonetTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1		not-accessible	An entry in the mscLpSonetTestStateTable.
INT mscLpSonetTestAdminState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpSonetTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpSonetTestUsageState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpSonetTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSonetTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1		not-accessible	An entry in the mscLpSonetTestSetupTable.
STR mscLpSonetTestPurpose	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpSonetTestType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpSonetTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpSonetTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpSonetTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpSonetTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSonetTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSonetTestDuration	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpSonetTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpSonetTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1		not-accessible	An entry in the mscLpSonetTestResultsTable.
C32 mscLpSonetTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpSonetTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpSonetTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpSonetTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSonetTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSonetTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSonetTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSonetTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpSonetTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpSonetProvTable	1.3.6.1.4.1.562.36.2.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
mscLpSonetProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.10.1		not-accessible	An entry in the mscLpSonetProvTable.
INT mscLpSonetClockingSource	1.3.6.1.4.1.562.36.2.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
mscLpSonetCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSonetCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.11.1		not-accessible	An entry in the mscLpSonetCidDataTable.
U32 mscLpSonetCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpSonetAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpSonetAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.14.12.1		not-accessible	An entry in the mscLpSonetAdminInfoTable.
STR mscLpSonetVendor	1.3.6.1.4.1.562.36.2.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpSonetCommentText	1.3.6.1.4.1.562.36.2.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpSonetIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSonetIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.13.1		not-accessible	An entry in the mscLpSonetIfEntryTable.
INT mscLpSonetIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpSonetIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpSonetOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.14.1		not-accessible	An entry in the mscLpSonetOperStatusTable.
INT mscLpSonetSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpSonetStateTable	1.3.6.1.4.1.562.36.2.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.15.1		not-accessible	An entry in the mscLpSonetStateTable.
INT mscLpSonetAdminState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetUsageState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSonetAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSonetProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSonetControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSonetAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpSonetStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSonetUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpSonetOperTable	1.3.6.1.4.1.562.36.2.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSonetOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.16.1		not-accessible	An entry in the mscLpSonetOperTable.
INT mscLpSonetLosAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetLofAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetTxAis	1.3.6.1.4.1.562.36.2.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSonetTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
mscLpSonetStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.17.1		not-accessible	An entry in the mscLpSonetStatsTable.
C32 mscLpSonetRunningTime	1.3.6.1.4.1.562.36.2.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 mscLpSonetErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSonetSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSonetSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSonetSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 mscLpSonetSectLosSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSonetSectFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSonetLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 mscLpSonetLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 mscLpSonetFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
mscLpSdh	1.3.6.1.4.1.562.36.2.1.12.15
mscLpSdhRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.1		not-accessible	This entry controls the addition and deletion of mscLpSdh components.
mscLpSdhRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.1.1		not-accessible	A single entry in the table represents a single mscLpSdh component.
ROW mscLpSdhRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdh components. These components can be added and deleted.
STR mscLpSdhComponentName	1.3.6.1.4.1.562.36.2.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSdhStorageType	1.3.6.1.4.1.562.36.2.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdh tables.
I32 mscLpSdhIndex	1.3.6.1.4.1.562.36.2.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdh tables.
mscLpSdhPath	1.3.6.1.4.1.562.36.2.1.12.15.2
mscLpSdhPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPath components.
mscLpSdhPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPath component.
ROW mscLpSdhPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdhPath components. These components can be added and deleted.
STR mscLpSdhPathComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSdhPathStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPath tables.
I32 mscLpSdhPathIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdhPath tables.
mscLpSdhPathCell	1.3.6.1.4.1.562.36.2.1.12.15.2.2
mscLpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPathCell components.
mscLpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPathCell component.
ROW mscLpSdhPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhPathCell components. These components cannot be added nor deleted.
STR mscLpSdhPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSdhPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPathCell tables.
NON mscLpSdhPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhPathCell tables.
mscLpSdhPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpSdhPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1		not-accessible	An entry in the mscLpSdhPathCellProvTable.
U32 mscLpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpSdhPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSdhPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1		not-accessible	An entry in the mscLpSdhPathCellOperTable.
INT mscLpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpSdhPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1		not-accessible	An entry in the mscLpSdhPathCellStatsTable.
C32 mscLpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpSdhPathProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
mscLpSdhPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1		not-accessible	An entry in the mscLpSdhPathProvTable.
LIN mscLpSdhPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
mscLpSdhPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSdhPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1		not-accessible	An entry in the mscLpSdhPathCidDataTable.
U32 mscLpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpSdhPathStateTable	1.3.6.1.4.1.562.36.2.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1		not-accessible	An entry in the mscLpSdhPathStateTable.
INT mscLpSdhPathAdminState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhPathUsageState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSdhPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSdhPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSdhPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpSdhPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSdhPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpSdhPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSdhPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1		not-accessible	An entry in the mscLpSdhPathIfEntryTable.
INT mscLpSdhPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpSdhPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpSdhPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1		not-accessible	An entry in the mscLpSdhPathOperStatusTable.
INT mscLpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpSdhPathOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
mscLpSdhPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1		not-accessible	An entry in the mscLpSdhPathOperTable.
INT mscLpSdhPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathTxAis	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
mscLpSdhPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1		not-accessible	An entry in the mscLpSdhPathStatsTable.
C32 mscLpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSdhPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 mscLpSdhPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 mscLpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
mscLpSdhTest	1.3.6.1.4.1.562.36.2.1.12.15.3
mscLpSdhTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of mscLpSdhTest components.
mscLpSdhTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single mscLpSdhTest component.
ROW mscLpSdhTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhTest components. These components cannot be added nor deleted.
STR mscLpSdhTestComponentName	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpSdhTestStorageType	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhTest tables.
NON mscLpSdhTestIndex	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhTest tables.
mscLpSdhTestStateTable	1.3.6.1.4.1.562.36.2.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpSdhTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1		not-accessible	An entry in the mscLpSdhTestStateTable.
INT mscLpSdhTestAdminState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpSdhTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpSdhTestUsageState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpSdhTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSdhTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1		not-accessible	An entry in the mscLpSdhTestSetupTable.
STR mscLpSdhTestPurpose	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpSdhTestType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpSdhTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpSdhTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpSdhTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpSdhTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSdhTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSdhTestDuration	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpSdhTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpSdhTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1		not-accessible	An entry in the mscLpSdhTestResultsTable.
C32 mscLpSdhTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpSdhTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpSdhTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpSdhTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSdhTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSdhTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSdhTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSdhTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpSdhTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpSdhProvTable	1.3.6.1.4.1.562.36.2.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
mscLpSdhProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.10.1		not-accessible	An entry in the mscLpSdhProvTable.
INT mscLpSdhClockingSource	1.3.6.1.4.1.562.36.2.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
mscLpSdhCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSdhCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.11.1		not-accessible	An entry in the mscLpSdhCidDataTable.
U32 mscLpSdhCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpSdhAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpSdhAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.15.12.1		not-accessible	An entry in the mscLpSdhAdminInfoTable.
STR mscLpSdhVendor	1.3.6.1.4.1.562.36.2.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpSdhCommentText	1.3.6.1.4.1.562.36.2.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpSdhIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSdhIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.13.1		not-accessible	An entry in the mscLpSdhIfEntryTable.
INT mscLpSdhIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpSdhIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpSdhOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.14.1		not-accessible	An entry in the mscLpSdhOperStatusTable.
INT mscLpSdhSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpSdhStateTable	1.3.6.1.4.1.562.36.2.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.15.1		not-accessible	An entry in the mscLpSdhStateTable.
INT mscLpSdhAdminState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhUsageState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpSdhAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSdhProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSdhControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSdhAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpSdhStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSdhUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpSdhOperTable	1.3.6.1.4.1.562.36.2.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSdhOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.16.1		not-accessible	An entry in the mscLpSdhOperTable.
INT mscLpSdhLosAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhLofAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhTxAis	1.3.6.1.4.1.562.36.2.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSdhTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
mscLpSdhStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.17.1		not-accessible	An entry in the mscLpSdhStatsTable.
C32 mscLpSdhRunningTime	1.3.6.1.4.1.562.36.2.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 mscLpSdhErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSdhSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSdhSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSdhSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 mscLpSdhSectLosSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSdhSectFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSdhLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 mscLpSdhLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 mscLpSdhFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
mscLpJT2	1.3.6.1.4.1.562.36.2.1.12.16
mscLpJT2RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.1		not-accessible	This entry controls the addition and deletion of mscLpJT2 components.
mscLpJT2RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.1.1		not-accessible	A single entry in the table represents a single mscLpJT2 component.
ROW mscLpJT2RowStatus	1.3.6.1.4.1.562.36.2.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpJT2 components. These components can be added and deleted.
STR mscLpJT2ComponentName	1.3.6.1.4.1.562.36.2.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpJT2StorageType	1.3.6.1.4.1.562.36.2.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2 tables.
I32 mscLpJT2Index	1.3.6.1.4.1.562.36.2.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpJT2 tables.
mscLpJT2Test	1.3.6.1.4.1.562.36.2.1.12.16.2
mscLpJT2TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Test components.
mscLpJT2TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Test component.
ROW mscLpJT2TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Test components. These components cannot be added nor deleted.
STR mscLpJT2TestComponentName	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpJT2TestStorageType	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Test tables.
NON mscLpJT2TestIndex	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Test tables.
mscLpJT2TestStateTable	1.3.6.1.4.1.562.36.2.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpJT2TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1		not-accessible	An entry in the mscLpJT2TestStateTable.
INT mscLpJT2TestAdminState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpJT2TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpJT2TestUsageState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpJT2TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpJT2TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1		not-accessible	An entry in the mscLpJT2TestSetupTable.
STR mscLpJT2TestPurpose	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpJT2TestType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpJT2TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpJT2TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpJT2TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpJT2TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpJT2TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpJT2TestDuration	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpJT2TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpJT2TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1		not-accessible	An entry in the mscLpJT2TestResultsTable.
C32 mscLpJT2TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpJT2TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpJT2TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpJT2TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpJT2TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpJT2TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpJT2TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpJT2TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpJT2TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpJT2Cell	1.3.6.1.4.1.562.36.2.1.12.16.3
mscLpJT2CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Cell components.
mscLpJT2CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Cell component.
ROW mscLpJT2CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Cell components. These components cannot be added nor deleted.
STR mscLpJT2CellComponentName	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpJT2CellStorageType	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Cell tables.
NON mscLpJT2CellIndex	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Cell tables.
mscLpJT2CellProvTable	1.3.6.1.4.1.562.36.2.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpJT2CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1		not-accessible	An entry in the mscLpJT2CellProvTable.
U32 mscLpJT2CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
INT mscLpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
mscLpJT2CellOperTable	1.3.6.1.4.1.562.36.2.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpJT2CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1		not-accessible	An entry in the mscLpJT2CellOperTable.
INT mscLpJT2CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
mscLpJT2CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpJT2CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1		not-accessible	An entry in the mscLpJT2CellStatsTable.
C32 mscLpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpJT2CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
G32 mscLpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
C32 mscLpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
mscLpJT2CidDataTable	1.3.6.1.4.1.562.36.2.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpJT2CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.16.10.1		not-accessible	An entry in the mscLpJT2CidDataTable.
U32 mscLpJT2CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpJT2ProvTable	1.3.6.1.4.1.562.36.2.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
mscLpJT2ProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.11.1		not-accessible	An entry in the mscLpJT2ProvTable.
INT mscLpJT2ClockingSource	1.3.6.1.4.1.562.36.2.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
U32 mscLpJT2LineLength	1.3.6.1.4.1.562.36.2.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
LIN mscLpJT2ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
mscLpJT2IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpJT2IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.16.12.1		not-accessible	An entry in the mscLpJT2IfEntryTable.
INT mscLpJT2IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpJT2IfIndex	1.3.6.1.4.1.562.36.2.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpJT2OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpJT2OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.13.1		not-accessible	An entry in the mscLpJT2OperStatusTable.
INT mscLpJT2SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpJT2StateTable	1.3.6.1.4.1.562.36.2.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpJT2StateEntry	1.3.6.1.4.1.562.36.2.1.12.16.14.1		not-accessible	An entry in the mscLpJT2StateTable.
INT mscLpJT2AdminState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpJT2OperationalState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpJT2UsageState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpJT2AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpJT2ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpJT2ControlStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpJT2AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpJT2StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpJT2UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpJT2OperTable	1.3.6.1.4.1.562.36.2.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
mscLpJT2OperEntry	1.3.6.1.4.1.562.36.2.1.12.16.15.1		not-accessible	An entry in the mscLpJT2OperTable.
INT mscLpJT2LosAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2LofAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
INT mscLpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT mscLpJT2TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
mscLpJT2StatsTable	1.3.6.1.4.1.562.36.2.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
mscLpJT2StatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.16.1		not-accessible	An entry in the mscLpJT2StatsTable.
C32 mscLpJT2RunningTime	1.3.6.1.4.1.562.36.2.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
C32 mscLpJT2ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 mscLpJT2ErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 mscLpJT2SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
C32 mscLpJT2SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 mscLpJT2UnavailSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
C32 mscLpJT2BpvErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
C32 mscLpJT2CrcErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 mscLpJT2FrameErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 mscLpJT2LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
mscLpJT2AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpJT2AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.16.17.1		not-accessible	An entry in the mscLpJT2AdminInfoTable.
STR mscLpJT2Vendor	1.3.6.1.4.1.562.36.2.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpJT2CommentText	1.3.6.1.4.1.562.36.2.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpHssi	1.3.6.1.4.1.562.36.2.1.12.17
mscLpHssiRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.1		not-accessible	This entry controls the addition and deletion of mscLpHssi components.
mscLpHssiRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.1.1		not-accessible	A single entry in the table represents a single mscLpHssi component.
ROW mscLpHssiRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpHssi components. These components can be added and deleted.
STR mscLpHssiComponentName	1.3.6.1.4.1.562.36.2.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpHssiStorageType	1.3.6.1.4.1.562.36.2.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssi tables.
I32 mscLpHssiIndex	1.3.6.1.4.1.562.36.2.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpHssi tables.
mscLpHssiTest	1.3.6.1.4.1.562.36.2.1.12.17.2
mscLpHssiTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of mscLpHssiTest components.
mscLpHssiTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single mscLpHssiTest component.
ROW mscLpHssiTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpHssiTest components. These components cannot be added nor deleted.
STR mscLpHssiTestComponentName	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpHssiTestStorageType	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssiTest tables.
NON mscLpHssiTestIndex	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpHssiTest tables.
mscLpHssiTestStateTable	1.3.6.1.4.1.562.36.2.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpHssiTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1		not-accessible	An entry in the mscLpHssiTestStateTable.
INT mscLpHssiTestAdminState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpHssiTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpHssiTestUsageState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscLpHssiTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpHssiTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1		not-accessible	An entry in the mscLpHssiTestSetupTable.
STR mscLpHssiTestPurpose	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
INT mscLpHssiTestType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
U32 mscLpHssiTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
INT mscLpHssiTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
HEX mscLpHssiTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
U32 mscLpHssiTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpHssiTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpHssiTestDuration	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
mscLpHssiTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpHssiTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1		not-accessible	An entry in the mscLpHssiTestResultsTable.
C32 mscLpHssiTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
U32 mscLpHssiTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
INT mscLpHssiTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
NUM mscLpHssiTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpHssiTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpHssiTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpHssiTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpHssiTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
STR mscLpHssiTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
mscLpHssiProvTable	1.3.6.1.4.1.562.36.2.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
mscLpHssiProvEntry	1.3.6.1.4.1.562.36.2.1.12.17.10.1		not-accessible	An entry in the mscLpHssiProvTable.
INT mscLpHssiLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
OCT mscLpHssiReadyLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OCT mscLpHssiDataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
U32 mscLpHssiLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
LIN mscLpHssiApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
mscLpHssiCidDataTable	1.3.6.1.4.1.562.36.2.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpHssiCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.17.11.1		not-accessible	An entry in the mscLpHssiCidDataTable.
U32 mscLpHssiCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpHssiAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpHssiAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.17.12.1		not-accessible	An entry in the mscLpHssiAdminInfoTable.
STR mscLpHssiVendor	1.3.6.1.4.1.562.36.2.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpHssiCommentText	1.3.6.1.4.1.562.36.2.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
mscLpHssiIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpHssiIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.17.13.1		not-accessible	An entry in the mscLpHssiIfEntryTable.
INT mscLpHssiIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
NUM mscLpHssiIfIndex	1.3.6.1.4.1.562.36.2.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
mscLpHssiOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpHssiOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.14.1		not-accessible	An entry in the mscLpHssiOperStatusTable.
INT mscLpHssiSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
mscLpHssiStateTable	1.3.6.1.4.1.562.36.2.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpHssiStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.15.1		not-accessible	An entry in the mscLpHssiStateTable.
INT mscLpHssiAdminState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpHssiOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpHssiUsageState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpHssiAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpHssiProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpHssiControlStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpHssiAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpHssiStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpHssiUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpHssiOperTable	1.3.6.1.4.1.562.36.2.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
mscLpHssiOperEntry	1.3.6.1.4.1.562.36.2.1.12.17.16.1		not-accessible	An entry in the mscLpHssiOperTable.
INT mscLpHssiActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
OCT mscLpHssiLineState	1.3.6.1.4.1.562.36.2.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
G32 mscLpHssiActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
G32 mscLpHssiActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
C32 mscLpHssiDataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
mscLpEng	1.3.6.1.4.1.562.36.2.1.12.23
mscLpEngRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.1		not-accessible	This entry controls the addition and deletion of mscLpEng components.
mscLpEngRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.1.1		not-accessible	A single entry in the table represents a single mscLpEng component.
ROW mscLpEngRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpEng components. These components cannot be added nor deleted.
STR mscLpEngComponentName	1.3.6.1.4.1.562.36.2.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpEngStorageType	1.3.6.1.4.1.562.36.2.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEng tables.
NON mscLpEngIndex	1.3.6.1.4.1.562.36.2.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEng tables.
mscLpEngDs	1.3.6.1.4.1.562.36.2.1.12.23.2
mscLpEngDsRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDs components.
mscLpEngDsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDs component.
ROW mscLpEngDsRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDs components. These components can be added and deleted.
STR mscLpEngDsComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpEngDsStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDs tables.
INT mscLpEngDsIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the mscLpEngDs tables.
mscLpEngDsOv	1.3.6.1.4.1.562.36.2.1.12.23.2.2
mscLpEngDsOvRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDsOv components.
mscLpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDsOv component.
ROW mscLpEngDsOvRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDsOv components. These components can be added and deleted.
STR mscLpEngDsOvComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscLpEngDsOvStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDsOv tables.
NON mscLpEngDsOvIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEngDsOv tables.
mscLpEngDsOvProvTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
mscLpEngDsOvProvEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1		not-accessible	An entry in the mscLpEngDsOvProvTable.
U32 mscLpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
mscLpEngDsOperTable	1.3.6.1.4.1.562.36.2.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
mscLpEngDsOperEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1		not-accessible	An entry in the mscLpEngDsOperTable.
U32 mscLpEngDsAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
mscLpProvTable	1.3.6.1.4.1.562.36.2.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
mscLpProvEntry	1.3.6.1.4.1.562.36.2.1.12.100.1		not-accessible	An entry in the mscLpProvTable.
LIN mscLpMainCard	1.3.6.1.4.1.562.36.2.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
LIN mscLpSpareCard	1.3.6.1.4.1.562.36.2.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
LIN mscLpLogicalProcessorType	1.3.6.1.4.1.562.36.2.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
mscLpCidDataTable	1.3.6.1.4.1.562.36.2.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.101.1		not-accessible	An entry in the mscLpCidDataTable.
U32 mscLpCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
mscLpStateTable	1.3.6.1.4.1.562.36.2.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpStateEntry	1.3.6.1.4.1.562.36.2.1.12.102.1		not-accessible	An entry in the mscLpStateTable.
INT mscLpAdminState	1.3.6.1.4.1.562.36.2.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpOperationalState	1.3.6.1.4.1.562.36.2.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpUsageState	1.3.6.1.4.1.562.36.2.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
OCT mscLpAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpControlStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
INT mscLpStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
mscLpOperTable	1.3.6.1.4.1.562.36.2.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
mscLpOperEntry	1.3.6.1.4.1.562.36.2.1.12.103.1		not-accessible	An entry in the mscLpOperTable.
NUM mscLpActiveCard	1.3.6.1.4.1.562.36.2.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
INT mscLpMainCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned. notAvailable The main card is not available. available The main card is available (running as standby). active The main card is running as active.
INT mscLpSpareCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned. notAvailable The spare card is not available. alreadyInUse The spare card is already in use by another LP. available The spare card is available (running as standby). active The spare card is running as active.
INT mscLpRestartOnCpSwitch	1.3.6.1.4.1.562.36.2.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
ENT mscLpScheduledSwitchover	1.3.6.1.4.1.562.36.2.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
mscLpUtilTable	1.3.6.1.4.1.562.36.2.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
mscLpUtilEntry	1.3.6.1.4.1.562.36.2.1.12.104.1		not-accessible	An entry in the mscLpUtilTable.
U32 mscLpTimeInterval	1.3.6.1.4.1.562.36.2.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
G32 mscLpCpuUtil	1.3.6.1.4.1.562.36.2.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 mscLpCpuUtilAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 mscLpMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpLocalMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card.
G32 mscLpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.36.2.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.36.2.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
mscLpCapTable	1.3.6.1.4.1.562.36.2.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
mscLpCapEntry	1.3.6.1.4.1.562.36.2.1.12.105.1		not-accessible	An entry in the mscLpCapTable.
U32 mscLpMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity.
U32 mscLpLocalMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card.
mscLpLinkToApplicationsTable	1.3.6.1.4.1.562.36.2.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
mscLpLinkToApplicationsEntry	1.3.6.1.4.1.562.36.2.1.12.242.1		not-accessible	An entry in the mscLpLinkToApplicationsTable.
LIN mscLpLinkToApplicationsValue	1.3.6.1.4.1.562.36.2.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the mscLpLinkToApplicationsTable.
mscLpMemoryCapacityTable	1.3.6.1.4.1.562.36.2.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity for each type of memory.
mscLpMemoryCapacityEntry	1.3.6.1.4.1.562.36.2.1.12.244.1		not-accessible	An entry in the mscLpMemoryCapacityTable.
INT mscLpMemoryCapacityIndex	1.3.6.1.4.1.562.36.2.1.12.244.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryCapacityTable specific index for the mscLpMemoryCapacityTable.
U32 mscLpMemoryCapacityValue	1.3.6.1.4.1.562.36.2.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the mscLpMemoryCapacityTable.
mscLpMemoryUsageTable	1.3.6.1.4.1.562.36.2.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization for each type of memory.
mscLpMemoryUsageEntry	1.3.6.1.4.1.562.36.2.1.12.245.1		not-accessible	An entry in the mscLpMemoryUsageTable.
INT mscLpMemoryUsageIndex	1.3.6.1.4.1.562.36.2.1.12.245.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageTable specific index for the mscLpMemoryUsageTable.
G32 mscLpMemoryUsageValue	1.3.6.1.4.1.562.36.2.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageTable.
mscLpMemoryUsageAvgTable	1.3.6.1.4.1.562.36.2.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageAvgEntry	1.3.6.1.4.1.562.36.2.1.12.276.1		not-accessible	An entry in the mscLpMemoryUsageAvgTable.
INT mscLpMemoryUsageAvgIndex	1.3.6.1.4.1.562.36.2.1.12.276.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgTable specific index for the mscLpMemoryUsageAvgTable.
G32 mscLpMemoryUsageAvgValue	1.3.6.1.4.1.562.36.2.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgTable.
mscLpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.36.2.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.36.2.1.12.277.1		not-accessible	An entry in the mscLpMemoryUsageAvgMinTable.
INT mscLpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.36.2.1.12.277.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMinTable specific index for the mscLpMemoryUsageAvgMinTable.
G32 mscLpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.36.2.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMinTable.
mscLpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.36.2.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.36.2.1.12.278.1		not-accessible	An entry in the mscLpMemoryUsageAvgMaxTable.
INT mscLpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.36.2.1.12.278.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMaxTable specific index for the mscLpMemoryUsageAvgMaxTable.
G32 mscLpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.36.2.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMaxTable.
logicalProcessorMIB	1.3.6.1.4.1.562.36.2.2.11
logicalProcessorGroup	1.3.6.1.4.1.562.36.2.2.11.1
logicalProcessorGroupCA	1.3.6.1.4.1.562.36.2.2.11.1.1
logicalProcessorGroupCA02	1.3.6.1.4.1.562.36.2.2.11.1.1.3
logicalProcessorGroupCA02A	1.3.6.1.4.1.562.36.2.2.11.1.1.3.2
logicalProcessorCapabilities	1.3.6.1.4.1.562.36.2.2.11.3
logicalProcessorCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.11.3.1
logicalProcessorCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.11.3.1.3
logicalProcessorCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.11.3.1.3.2

AsciiString (59)
STR mscLpDS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpDS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpDS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS1CommentText	1.3.6.1.4.1.562.36.2.1.12.7.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpDS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpDS1Vendor	1.3.6.1.4.1.562.36.2.1.12.7.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3CommentText	1.3.6.1.4.1.562.36.2.1.12.5.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3DS1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3DS1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpDS3DS1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpDS3DS1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3DS1CommentText	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpDS3DS1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpDS3DS1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpDS3DS1Vendor	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpDS3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpDS3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpDS3Vendor	1.3.6.1.4.1.562.36.2.1.12.5.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE1ChanCommentText	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE1ChanTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpE1ChanTestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpE1ChanVendor	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE1CommentText	1.3.6.1.4.1.562.36.2.1.12.8.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE1TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpE1TestPurpose	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpE1Vendor	1.3.6.1.4.1.562.36.2.1.12.8.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpE3CommentText	1.3.6.1.4.1.562.36.2.1.12.6.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpE3G832TrailTraceExpected	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.2	AsciiString	read-write	This attribute indicates the E.164 address which is expected in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR mscLpE3G832TrailTraceReceived	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.4	AsciiString	read-only	This attribute indicates the 15 byte E.164 address which is currently being received in the trail trace (TR) field of the E3 G832 frame. If this attribute differs from the provisioned trailTraceTransmitted string a trail trace mismatch (TTM) defect is reported, possibly resulting in a TTM alarm, as described for operational attribute trailTraceMismatch.
STR mscLpE3G832TrailTraceTransmitted	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1.1	AsciiString	read-write	This attribute indicates the E.164 address which is to be encoded in the trail access point identifier, which is transmitted using the Trail Trace (TR) field of the transmitted E3 Frame. Both the expected trail access point identifier and the transmitted trail access point identifier are provisionable attributes of the G832 component. The 16 byte Trail Trace frame is composed of one byte containing a frame start marker and a CRC-7 calculation over the previous frame, and 15 bytes for transporting an E.164 address. If less than the full 15 bytes are used, the address is padded with NULL characters.
STR mscLpE3TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpE3TestPurpose	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpE3Vendor	1.3.6.1.4.1.562.36.2.1.12.6.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpHssiCommentText	1.3.6.1.4.1.562.36.2.1.12.17.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpHssiTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpHssiTestPurpose	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpHssiVendor	1.3.6.1.4.1.562.36.2.1.12.17.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpJT2CommentText	1.3.6.1.4.1.562.36.2.1.12.16.17.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpJT2TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpJT2TestPurpose	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpJT2Vendor	1.3.6.1.4.1.562.36.2.1.12.16.17.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpSdhCommentText	1.3.6.1.4.1.562.36.2.1.12.15.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpSdhTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpSdhTestPurpose	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpSdhVendor	1.3.6.1.4.1.562.36.2.1.12.15.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpSonetCommentText	1.3.6.1.4.1.562.36.2.1.12.14.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpSonetTestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpSonetTestPurpose	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpSonetVendor	1.3.6.1.4.1.562.36.2.1.12.14.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpV35CommentText	1.3.6.1.4.1.562.36.2.1.12.9.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpV35TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpV35TestPurpose	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpV35Vendor	1.3.6.1.4.1.562.36.2.1.12.9.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
STR mscLpX21CommentText	1.3.6.1.4.1.562.36.2.1.12.10.12.1.2	AsciiString	read-write	Any miscellaneous text about the facility.
STR mscLpX21TestBitErrorRate	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.11	AsciiString	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the calculated bit error rate on the link. Test data are generated and sent in frames of a preset size (frameSize). The Test component will try to estimate the number of bit errors in any errored frame which is identifiable. The statistics will be updated accordingly. A lost frame (may be due to an error on the flag sequence) will be discarded for the bit error rate calculation. The result is presented in the form of xEsyy, where x is the mantissa, syy is the exponent, for example 0E+00, 2E-09. Note that the bitErrorRate is an estimate only. For more reliable test results, the test should be done over a long period. Multiple tests would also improve the confidence level of the test results.
STR mscLpX21TestPurpose	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.1	AsciiString	read-write	This attribute records the purpose of the test so that the test results can be associated and properly analyzed.
STR mscLpX21Vendor	1.3.6.1.4.1.562.36.2.1.12.10.12.1.1	AsciiString	read-write	This is the name of the vendor supplying the facility.
Counter32 (218)
C32 mscLpDS1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 mscLpDS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpDS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpDS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpDS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 mscLpDS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpDS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 mscLpDS1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.7.17.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 mscLpDS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.7.17.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 mscLpDS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.7.17.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
C32 mscLpDS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpDS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.7.17.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpDS3CBitCbitCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.2	Counter32	read-only	This attribute indicates the total count of C-Bit Parity Code Violations (CCV). A CCV is obtained when the parity calculated over the previous DS3 frame and the value of the CP-bits appearing in the current DS3 frame differ. The value of this attribute will wrap around to 0 if it does reach its maximum value. CCV counting is inhibited for second intervals where C-Bit Parity Severely Errored Seconds (CSES) are counted. It is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitCbitErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.3	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Errored Seconds (CES). A CES second is declared for second intervals containing one or more CCVs or when one or more SEF (Severely Errored Frame) or AIS (Alarm Indication Signal) defects. CES counting is inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.1	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered any C-Bit errors.
C32 mscLpDS3CBitCbitSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.4	Counter32	read-only	This attribute indicates the total number of C-Bit Parity Severely Errored Seconds (CSES). A CSES is declared for second intervals containing more than 44 CCVs or one or more SEF or AIS defects. The occurrence of CSES in a one second interval causes the inhibition of CCV counting during that second interval. CSES counting is also inhibited for second intervals where C-Bit Unavailable Seconds (CUAS) are counted.
C32 mscLpDS3CBitCbitUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.5	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive C-Bit Severely Errored Seconds (CSES). The 10 CSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no CSES. The 10 seconds with no CSES are excluded from the unavailable time. For second intervals where CUAS is counted, counting of C-Bit Coding Violations (CCV), C-Bit Errored Seconds (CES) and C-Bit Severely Errored Seconds (CSES) is inhibited.
C32 mscLpDS3CBitFarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.7	Counter32	read-only	This attribute indicates the total count of DS3 frames containing a Coding Violation on the Far-End (FECV), also known as a Far-End Block Error (FEBE). Each FEBE is reported over the FEBE bits each time the far-end DS3 terminal detects a C-BIT Parity error over a received DS3 frame. For second intervals where Far-End Unavailable Seconds (FEAUS) or Far-End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.8	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more FECVs or one or more far-end SEF/ AIS defects. A far-end SEF/AIS defect occurs when the X-Bits of the DS3 frame are received as being set to zero. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpDS3CBitFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.6	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has not suffered of any far-end errors.
C32 mscLpDS3CBitFarEndFailures	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.12	Counter32	read-only	This attribute indicates the total number of times that a far-end path failure (i.e. a Far-End SEF/AIS defect) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3CBitFarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.10	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more far-end SEF/AIS defects.For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESASs is inhibited.
C32 mscLpDS3CBitFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESES). A FESES is declared for second intervals containing more than 44 FECVs or one or more far-end SEF/AIS defects. For second intervals where a FESES is counted, counting of FECVs is inhibited. For second intervals where Far-End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpDS3CBitFarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1.11	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 far-end path is unavailable. The DS3 far-end path becomes unavailable at the onset of 10 consecutive Far-End Severely Errored Seconds (FESES). The 10 FESESs are included in the unavailable time. Once unavailable, the DS3 far-end path becomes available at the onset of 10 contiguous seconds with no FESES. The 10 seconds with no FESES are excluded from the unavailable time. For second intervals where FEUAS is counted, counting of Far-End Coding Violations (FECV), Far-End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End Sef/Ais Seconds (FESAS) is inhibited.
C32 mscLpDS3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpDS3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpDS3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS3DS1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpDS3DS1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpDS3DS1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpDS3DS1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpDS3DS1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.7	Counter32	read-only	This attribute counts the total number of CRC-6 errors. These will only be counted when the lineType is esf.
C32 mscLpDS3DS1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.3	Counter32	read-only	This attribute counts the number of errored seconds the tributary has counted since it was activated. An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpDS3DS1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.2	Counter32	read-only	This attribute counts the number of seconds that the tributary has been in an error free state.
C32 mscLpDS3DS1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.8	Counter32	read-only	This attribute counts the total number of frame errors. A frame error is an error in the framing bits.
C32 mscLpDS3DS1RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.1	Counter32	read-only	This attribute counts the number of seconds since the tributary was activated.
C32 mscLpDS3DS1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.5	Counter32	read-only	This attribute counts the number of severely errored framing seconds the tributary has counted since it was activated A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpDS3DS1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.4	Counter32	read-only	This attribute counts the number of severely errored seconds the tributary has counted since it was activated. A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpDS3DS1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.9	Counter32	read-only	The total number of times that the line experienced a controlled frame slip.
C32 mscLpDS3DS1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpDS3DS1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1.6	Counter32	read-only	This attribute counts the total number of seconds that the tributary has been in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpDS3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the DS3 port has been in an error free state.
C32 mscLpDS3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. A DS3 Line Code Violation is a B3Zs error. LCV counting is inhibited for second intervals where Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for second intervals containing one or more LCV or one or more Loss Of Signal (LOS) defects.
C32 mscLpDS3LineFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpDS3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 44 LCVs or one or more LOS defects.
C32 mscLpDS3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.5.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a P-bit parity error, or possibly a frame error or a disagreement between P-bits or X-bits. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathFailures	1.3.6.1.4.1.562.36.2.1.12.5.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.11	Counter32	read-only	This attribute indicates the total number of SEF/AIS Seconds (PSASs). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than 44 PCVs or one or more SEF or AIS defects. Counting of PSESs is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpDS3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the DS3 path is unavailable. The DS3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the DS3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Coding Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path Sef/Ais Seconds (PSAS) is inhibited.
C32 mscLpDS3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpDS3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpDS3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpDS3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpDS3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpDS3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpDS3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpDS3RunningTime	1.3.6.1.4.1.562.36.2.1.12.5.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the DS3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each DS3 subcomponent's error counts can be updated when this count is active.
C32 mscLpDS3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpE1BpvErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.7	Counter32	read-only	The current count of Bipolar Violations. A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line.
C32 mscLpE1ChanCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpE1ChanCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpE1ChanCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpE1ChanTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpE1CrcErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.8	Counter32	read-only	If the interface is a DS1 line, it is the current count of CRC-6 errors. These will only be counted when the lineType is ESF. If the interface is an E1 line, it is the total number of CRC-4 errors. These will only be counted when crc4Mode is on.
C32 mscLpE1ErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.3	Counter32	read-only	An errored second is declared when a second with one or more Code Violation Error events, or one or more Out Of Frame events occurs. A code violation error may be a CRC error or a BPV error. An Out Of Frame event occurs when 2 out of 5 framing bits are in error.
C32 mscLpE1ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.2	Counter32	read-only	The number of seconds that the port has been in an error free state.
C32 mscLpE1FrmErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.9	Counter32	read-only	The current count of frame errors. A frame error is an error in the framing bits
C32 mscLpE1LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.8.18.1.10	Counter32	read-only	The total number of times that the line lost signal.
C32 mscLpE1RunningTime	1.3.6.1.4.1.562.36.2.1.12.8.18.1.1	Counter32	read-only	The number of seconds since the port component was activated.
C32 mscLpE1SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.5	Counter32	read-only	A severely errored framing second occurs when a second with one or more Out Of Frame events occurs.
C32 mscLpE1SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.4	Counter32	read-only	A severely errored second occurs when a second with 320 or more Code Violation Error events or one or more Out Of Frame events occurs.
C32 mscLpE1SlipErrors	1.3.6.1.4.1.562.36.2.1.12.8.18.1.11	Counter32	read-only	The total number of times that the line experienced a controlled frame slip. This attribute is incremented for ports on the voice cards (for example the 1pDS1V and the 1pE1V function processors) only.
C32 mscLpE1TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpE1UnavailSec	1.3.6.1.4.1.562.36.2.1.12.8.18.1.6	Counter32	read-only	The total number of seconds that the interface is in an unavailable signal state. An unavailable signal state occurs at the onset of 10 consecutive Severely Errored Seconds. The state is cleared at the onset of 10 seconds with no Severely Errored Seconds.
C32 mscLpE3CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpE3CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpE3CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpE3ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the E3 port has been in an error free state.
C32 mscLpE3G832FarEndCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.2	Counter32	read-only	A count of E3 frames containing a Far-End Block Error (FEBE). A FEBE is reported over the FEBE bit each time the far-end terminal detects a BIP-8 error in a received E3 frame. For second intervals where Far End Unavailable Seconds (FEUAS) or Far End Severely Errored Seconds (FESES) are counted, counting of FECVs is inhibited. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3G832FarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.3	Counter32	read-only	This attribute indicates the total number of Far-End Errored Seconds (FEES). A FEES is declared for second intervals containing with one or more Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. A FERF defect occurs when the FERF bit in the received frame is set to one. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FEESs is inhibited.
C32 mscLpE3G832FarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.1	Counter32	read-only	This attribute indicates the number of seconds that the E3 line has not suffered any G832 errors.
C32 mscLpE3G832FarEndSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.5	Counter32	read-only	This attribute indicates the total number of Far-End SEF/AIS Seconds (FESAS). A FESAS is declared for second intervals containing one or more Far-End Receive Failure (FERF) defects. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESAS is inhibited.
C32 mscLpE3G832FarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.4	Counter32	read-only	This attribute indicates the total number of Far-End Severely Errored Seconds (FESESs). A FESES is declared for second intervals containing more than 34 Far-End Coding Violations (FECV) or one or more Far-End Receive Failure (FERF) defects. For second intervals where a Far-End Severely Errored Seconds (FESES) is counted, counting of FECVs is inhibited. For second intervals where Far End Unavailable Seconds (FEUAS) are counted, counting of FESESs is inhibited.
C32 mscLpE3G832FarEndUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 far-end path is unavailable. The E3 far-end path becomes unavailable at the onset of 10 consecutive Far End Severely Errored Seconds (FESES). It comes available at the onset of 10 contiguous seconds with no FESES. The unavailable time includes the initial 10 seconds to enter the unavailable state but not the 10 seconds to exit the state For second intervals where FEUAS is counted, counting of Far End Coding Violations (FECV), Far- End Errored Seconds (FEES), Far-End Severely Errored Seconds (FESES) and Far-End SefAis Seconds (FESAS) are inhibited.
C32 mscLpE3LineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.3	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCV) detected. An E3 Line Code Violation is an HDB3 coded signal error. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3LineErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.4	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LES) that have been counted. A LES is declared for interval seconds containing one or more Line Code Violations (LCV) or one or more Loss Of Signal (LOS) defects.
C32 mscLpE3LineFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.7	Counter32	read-only	This attribute indicates the total number of times that a line failure (LOS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3LineLosSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.6	Counter32	read-only	This attribute indicates the total number of Line LOS Seconds (LOSS) that have been counted. A LOSS is declared for second intervals containing one or more Loss of Signal (LOS) defects.
C32 mscLpE3LineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.5	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSES) that have been counted. A LSES is declared for second intervals containing more than 34 Line Code Violations (LCV) or one or more Loss of Signal (LOS) defects.
C32 mscLpE3PathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.6.17.1.8	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCV) detected. An E3 PCV is an error in the Frame Alignment (FA) signal, or, in G.832 Framing Mode, an error in the Frame Alignment signal or a BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.9	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PES) that have been counted. A PES is declared for second intervals containing one or more Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of Path Errored Seconds is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathFailures	1.3.6.1.4.1.562.36.2.1.12.6.17.1.13	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOF/AIS failure) has been declared. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PathSefAisSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.11	Counter32	read-only	This attribute indicates the total number of Path SEF/AIS Seconds (PSAS). A PSAS is declared for second intervals containing one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSAS is inhibited when Path Unavailable Seconds (PUAS) is counted over the monitored second.
C32 mscLpE3PathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.10	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSES) that have been counted. A PSES is declared for second intervals containing more than 22 (G.751 E3) or 34 (G.832 E3) Path Code Violations (PCV) or one or more Severely Errored Frame (SEF) or Alarm Indication Signal (AIS) defects. Counting of PSESs is inhibited when a Path Unavailable Second (PUAS) is counted over the monitored second.
C32 mscLpE3PathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.17.1.12	Counter32	read-only	This attribute indicates the total number of one second intervals for which the E3 path is unavailable. The E3 path becomes unavailable at the onset of 10 consecutive Path Severely Errored Seconds (PSES). The 10 PSESs are included in the unavailable time. Once unavailable, the E3 path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where PUAS is counted, counting of Path Code Violations (PCV), Path Errored Seconds (PES), Path Severely Errored Seconds (PSES) and Path SefAis Seconds (PSAS) is inhibited.
C32 mscLpE3PlcpCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.2	Counter32	read-only	This attribute indicates the total number of BIP-8 Errors, framing pattern octet errors, and path overhead identification errors detected in received PLCP frames. Counting of PLCP CV is inhibited for second intervals where PLCP Severely Errored Framing Seconds (SEFS) or PLCP Unavailable Seconds (UAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PlcpErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.3	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Coding Violations (CV) or in which a PLCP Severely Errored Framing Second (SEFS) was counted. Counting of PLCP ES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.1	Counter32	read-only	This attribute indicates the number of seconds during which the near-end PLCP path layer had no errors.
C32 mscLpE3PlcpFarEndCodingViolations	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.8	Counter32	read-only	This attribute indicates the total number of PLCP Far-End Block Errors (FEBE) reported by the far-end terminal. Counting of FEBEs is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted. This attribute is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
C32 mscLpE3PlcpFarEndErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.9	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FEES is inhibited during second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.7	Counter32	read-only	This attribute indicates the number of seconds during which the far- end PLCP path layer had no errors.
C32 mscLpE3PlcpFarEndSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.10	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCP Far-End Coding Violations (FECV). Counting of PLCP FESES is inhibited for second intervals where PLCP Far-End Unavailable Seconds (FEUAS) are counted.
C32 mscLpE3PlcpFarEndUnavailableSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.11	Counter32	read-only	This attribute indicates the number of seconds during which the PLCP far end is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP RAI (Remote Alarm Indication). Service becomes available again after this condition is cleared. For second intervals where PLCP FEUAS are counted, counting of PLCP Far-End Coding Violations (FECV), PLCP Far- End Errored Seconds (FEES), and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpE3PlcpSevErroredFramingSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.5	Counter32	read-only	This attribute indicates the number of seconds containing one or more PLCP Severely Errored Frame (SEF) events. An SEF event is equivalent to a PLCP OOF (Out of Frame) event. Counting of PLCPP SEFSs is inhibited for second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.4	Counter32	read-only	This attribute indicates the number of seconds containing 5 or more PLCPCVs or in which a PLCPSEFS was counted (i.e. a PLCP OOF event occurred). Counting of PLCP SES is inhibited during second intervals where PLCP Unavailable Seconds (UAS) are counted.
C32 mscLpE3PlcpUnavailSec	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1.6	Counter32	read-only	This attribute indicates the number of seconds when the near-end PLCP layer is unavailable. The PLCP Path Layer becomes unavailable at the declaration of PLCP LOF (Loss of Frame) failure alarm state. The PLCP Path Layer becomes available again only after clearing this condition. For second intervals where PLCP UAS are counted, counting of PLCP Severely Errored Framing Seconds (SEFS), PLCP Coding Violations (CV), PLCP Errored Seconds (ES), PLCP Severely Errored Seconds (SES) and PLCP Far-End Severely Errored Seconds (FESES) is inhibited.
C32 mscLpE3RunningTime	1.3.6.1.4.1.562.36.2.1.12.6.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the E3 component has been activated and been in unlocked state or used for operational testing. All the other error counts that follow as well as each E3 subcomponent's error counts can be updated when this count is active.
C32 mscLpE3TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpHssiDataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.17.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 mscLpHssiTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpJT2BpvErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.7	Counter32	read-only	This attribute indicates the total count of bipolar violations (BPV). A bipolar violation is an error in the alternate mark inversion pattern (AMI) on the line. The value of this attribute will wrap to zero when it reaches its maximum value.
C32 mscLpJT2CellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpJT2CellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpJT2CellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpJT2CrcErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.8	Counter32	read-only	This attribute indicates the total number of cyclic redundancy check (CRC-5) errors detected on the incoming JT2 line. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 mscLpJT2ErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.3	Counter32	read-only	This attribute indicates the total number of errored seconds for the JT2 port. An errored second is declared when a second with one or more Code Violation Error events, or one or more LOF or LOS defects occur. A code violation error may be a cyclic redundancy check (CRC) error or a bipolar violation (BPV) error.
C32 mscLpJT2ErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.2	Counter32	read-only	This attribute indicates the number of seconds that the JT2 port has been in an error free state.
C32 mscLpJT2FrameErrors	1.3.6.1.4.1.562.36.2.1.12.16.16.1.9	Counter32	read-only	This attribute indicates the total number of Framing Errors that have occured on the JT2 port. A Framing Error is an error in the framing bits. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 mscLpJT2LosStateChanges	1.3.6.1.4.1.562.36.2.1.12.16.16.1.10	Counter32	read-only	This attribute indicates the total number of times that the incoming signal on the JT2 line has been lost. The value of this attribute will wrap to 0 when its maximum value is reached.
C32 mscLpJT2RunningTime	1.3.6.1.4.1.562.36.2.1.12.16.16.1.1	Counter32	read-only	This attribute indicates the number of seconds since the JT2 component was activated and placed in an unlocked state or used for operational testing. All the other error counts that follow as well as each JT2 subcomponent's error counts can be updated when this count is active.
C32 mscLpJT2SevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.5	Counter32	read-only	This attribute indicates the total number of severely errored framing seconds for the JT2 port. A severely errored framing second occurs when a second with one or more Framing Errors occur.
C32 mscLpJT2SevErroredSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.4	Counter32	read-only	This attribute indicates the total number of severely errored seconds for the JT2 port. A severely errored second occurs when a second with 255 or more Code Violation Error events or one or more LOF or LOS defects occur.
C32 mscLpJT2TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpJT2UnavailSec	1.3.6.1.4.1.562.36.2.1.12.16.16.1.6	Counter32	read-only	This attribute indicates the total number of seconds that the interface has been in an unavailable state. An unavailable state occurs at the onset of 10 consecutive Severely Errored Seconds. When the unavailable state is entered, the 10 Severely Errored Seconds are immediately transfered to the count of unavailableSeconds by incrementing the count of unavailSec by 10 and decrementing the count of sevErroredSec by 10. Whilst in the unavailable state, an unavailableSecond is counted for each SES or SEFS that occurs, and the count of SES and SEFS are both inhibited. The unavailable state is cleared at the onset of 10 consecutive seconds which are not Severely Errored Seconds.
C32 mscLpSdhErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSdhFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSdhFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 mscLpSdhFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSdhFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 mscLpSdhLineAisSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSdhLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSdhLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 mscLpSdhPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpSdhPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpSdhPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpSdhPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSdhPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 mscLpSdhPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSdhPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 mscLpSdhPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSdhPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSdhPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSdhPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSdhPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 mscLpSdhRunningTime	1.3.6.1.4.1.562.36.2.1.12.15.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 mscLpSdhSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.15.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSdhSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSdhSectFailures	1.3.6.1.4.1.562.36.2.1.12.15.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSdhSectLosSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSdhSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSdhSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.15.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 mscLpSdhTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpSonetErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.2	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an near-end error free state.
C32 mscLpSonetFarEndLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.19	Counter32	read-only	This attribute indicates the total number of Far-End Line AIS Seconds (FELAISSs) that have been counted. A FELAISS is declared for second intervals one or more L-RDI defects. Counting of FELAISS is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.16	Counter32	read-only	This attribute indicates the total number of line FEBE detected from the incoming line. The counting of line FEBE is inhibited for second intervals where a Far-End Line Severely Errored Second (FELSES) is counted. Counting of FELCVs is also inhibited over second intervals where a Far-End Line Unavailable Second (FELUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetFarEndLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.17	Counter32	read-only	This attribute indicates the total number of Far-End Line Errored Seconds (FELESs) that have been counted. A FELES is declared for second intervals containing one or more Far-End Line CVs (FELCVs) or one or more L-RDI defects. Counting of FELES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.15	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh component has been in an far-end error free state.
C32 mscLpSonetFarEndLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.21	Counter32	read-only	This attribute indicates the total number of times that a far-end line failure (L-RFI failure) has been declared.
C32 mscLpSonetFarEndLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.18	Counter32	read-only	This attribute indicates the total number of Far-End Line Severely Errored Seconds (FELSESs) that have been counted. A FELSES is declared for second intervals containing more than x FELCVs or one or more L-RDI defects. The value of x is 154 for a 155 Mbits/ sec interface. Counting of FELSES is inhibited over second intervals where a FELUAS is counted.
C32 mscLpSonetFarEndLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.20	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS far-end line is unavailable. The STS far-end line becomes unavailable at the onset of 10 consecutive FELSESs. The 10 FELSESs are included in the unavailable time. Once unavailable, the STS far-end line becomes available at the onset of 10 contiguous seconds with no FELSES. The 10 seconds with no FELSES are excluded from the unavailable time. For second intervals where a Far-End Line Unavailable Second (FELUAS) is counted, counting of FELCV, FELES, FELSES and FELAISS is inhibited.
C32 mscLpSonetLineAisSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.12	Counter32	read-only	This attribute indicates the total number of Line AIS Seconds (LAISSs) that have been counted. A LAISS is declared for second intervals containing one or more L-AIS defects. Counting of LAISS is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.9	Counter32	read-only	This attribute indicates the total number of Line Code Violations (LCVs) detected. A LCV corresponds to a line BIP-24 errors. LCV counting is inhibited for second intervals where a Line Severely Errored Second (LSES) is counted. Counting of LCVs is also inhibited over second intervals where a Line Unavailable Second (LUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetLineErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.10	Counter32	read-only	This attribute indicates the total number of Line Errored Seconds (LESs) that have been counted. A LES is declared for second intervals containing one or more LCVs or one or more line AIS defects. Counting of LES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.14	Counter32	read-only	This attribute indicates the total number of times that a line failure (L-AIS failure) has been declared.
C32 mscLpSonetLineSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.11	Counter32	read-only	This attribute indicates the total number of Line Severely Errored Seconds (LSESs) that have been counted. A LSES is declared for second intervals containing more than x LCVs or one or more L- AIS defects. The value of x is 154 for a 155 Mbits/sec interface. Counting of LSES is inhibited over second intervals where a LUAS is counted.
C32 mscLpSonetLineUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS line is unavailable. The STS line becomes unavailable at the onset of 10 consecutive LSESs. The 10 LSESs are included in the unavailable time. Once unavailable, the STS line becomes available at the onset of 10 contiguous seconds with no LSES. The 10 seconds with no LSES are excluded from the unavailable time. For second intervals where a Line Unavailable Second (LUAS) is counted, counting of LCV, LES, LSES and LAISS is inhibited.
C32 mscLpSonetPathCellCorrectableHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.5	Counter32	read-only	This attribute indicates the number of correctable ATM cell header errors that have been detected and corrected. Counting of correctableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected
C32 mscLpSonetPathCellSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.2	Counter32	read-only	This attribute indicates the total number of ATM Cell Severely Errored Seconds (SESs) that have been counted. In direct mapping mode, an ATM Cell SES is declared for second intervals containing one or more Out of Cell Delineation (OCD) defects. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected. In PLCP mapping mode, an ATM Cell SES is declared for second intervals containing one or more PLCP LOF defects. Counting of uncorrectableHeaderErrors (ucErr) and correctableHeaderErrors (cErr) is inhibited when the OCD defect is present.
C32 mscLpSonetPathCellUncorrectableHecErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.1	Counter32	read-only	This attribute indicates the number of uncorrectable ATM cell header errors that have been detected. Counting of uncorrectableHeaderErrors is inhibited when an Out of Cell Delineation (OCD) defect is present. An OCD defect occurs when seven consecutive incorrect HECs have been detected. An OCD defect terminates when six consecutive correct HECs have been detected.
C32 mscLpSonetPathFarEndPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.12	Counter32	read-only	This attribute indicates the total number of Far-End Path AIS and LOP Seconds (FEPALSs). A FEPALS is declared for second intervals containing one or more P-RDI defects. Counting of FEPALS is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.9	Counter32	read-only	This attribute indicates the total number of Far-End Path Code Violations (FEPCVs) detected. Each FEPCV corresponds to a path FEBE. FEPCV counting is inhibited over second intervals where a Far-End Path Severely Errored Second (FEPSES) is counted. Counting of PCVs is also inhibited over second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathFarEndPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.10	Counter32	read-only	This attribute indicates the total number of Far-End Path Errored Seconds (FEPESs) that have been counted. A FEPES is declared for second intervals containing one or more FEPCVs or one or more path RDI (P-RDI) defects. Counting of FEPES is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.8	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an far-end error free state.
C32 mscLpSonetPathFarEndPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.14	Counter32	read-only	This attribute indicates the total number of times that a STS/STM far-end path failure (P-RFI failure) has been declared.
C32 mscLpSonetPathFarEndPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.11	Counter32	read-only	This attribute indicates the total number of Far-End Path Severely Errored Seconds (FEPSESs) that have been counted. A FEPSES is declared for second intervals containing more than x FEPCVs or one or more P-RDI defects. The value of x is 2400 for a 155 Mbits/ sec interface. Counting of FEPSESs is inhibited when FEPUAS is counted over the monitored second.
C32 mscLpSonetPathFarEndPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.13	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM far-end path is unavailable. The far-end path becomes unavailable at the onset of 10 consecutive FEPSESs. The 10 FEPSESs are included in the unavailable time. Once unavailable, the far-end path becomes available at the onset of 10 contiguous seconds with no FEPSES. The 10 seconds with no FEPSES are excluded from the unavailable time. For second intervals where a Far-End Path Unavailable Second (FEPUAS) is counted, counting of FEPCV, FEPES, FEPSES and FEPALS is inhibited.
C32 mscLpSonetPathPathAisLopSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.5	Counter32	read-only	This attribute indicates the total number of path AIS and LOP Seconds (PALSs). A PALS is declared for second intervals containing one or more path AIS or LOP defects. Counting of PALS is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.2	Counter32	read-only	This attribute indicates the total number of Path Code Violations (PCVs) detected. Each PCV corresponds to a path BIP-8 error. PCV counting is inhibited over second intervals where a Path Severely Errored Second (PSES) is counted. Counting of PCVs is also inhibited over second intervals where a Path Unavailable Second (PUAS) is counted. The count wraps at its maximum value.
C32 mscLpSonetPathPathErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.3	Counter32	read-only	This attribute indicates the total number of Path Errored Seconds (PESs) that have been counted. A PES is declared for second intervals containing one or more PCVs or one or more LOP or path AIS defects. Counting of PES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathErrorFreeSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.1	Counter32	read-only	This attribute indicates the number of seconds that the Sonet/Sdh Path component has been in an near-end error free state.
C32 mscLpSonetPathPathFailures	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.7	Counter32	read-only	This attribute indicates the total number of times that a path failure (LOP, P-AIS or Path Signal Label Mismatch failure) has been declared.
C32 mscLpSonetPathPathSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.4	Counter32	read-only	This attribute indicates the total number of Path Severely Errored Seconds (PSESs) that have been counted. A PSES is declared for second intervals containing more than x PCVs or one or more LOP or path AIS defects. The value of x is 2400 for a 155 Mbits/sec interface. Counting of PSES is inhibited when PUAS is counted over the monitored second.
C32 mscLpSonetPathPathUnavailSec	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1.6	Counter32	read-only	This attribute indicates the total number of one second intervals for which the STS/STM path is unavailable. The path becomes unavailable at the onset of 10 consecutive PSESs. The 10 PSESs are included in the unavailable time. Once unavailable, the path becomes available at the onset of 10 contiguous seconds with no PSES. The 10 seconds with no PSES are excluded from the unavailable time. For second intervals where a Path Unavailable Second (PUAS) is counted, counting of PCV, PES, PSES and PALS is inhibited.
C32 mscLpSonetRunningTime	1.3.6.1.4.1.562.36.2.1.12.14.17.1.1	Counter32	read-only	This attribute indicates the total number of seconds since the Sonet/ Sdh component has been activated and been in unlocked state. All the other error counts that follow can be updated when this count is active.
C32 mscLpSonetSectCodeViolations	1.3.6.1.4.1.562.36.2.1.12.14.17.1.3	Counter32	read-only	This attribute indicates the total number of Section Code Violations (SCVs) detected. A SCV corresponds to section BIP-8 error. SCV counting is inhibited for second intervals where a Section Severely Errored Second (SSES) is counted. The count wraps at its maximum value.
C32 mscLpSonetSectErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.4	Counter32	read-only	This attribute indicates the total number of Section Errored Seconds (SESs) that have been counted. A SES is declared for second intervals containing one or more SCVs or one or more Loss Of Signal (LOS) or Severely Errored Frame (SEF) defects. A SEF defect is the occurrence of 4 contiguous errored STS or STM frame alignment words.
C32 mscLpSonetSectFailures	1.3.6.1.4.1.562.36.2.1.12.14.17.1.8	Counter32	read-only	This attribute indicates the total number of times that a section failure (LOS or LOF failure) has been declared.
C32 mscLpSonetSectLosSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.6	Counter32	read-only	This attribute indicates the total number of Section LOS Seconds (SLOSSs) that have been counted. A SLOSS is declared for second intervals containing one or more LOS defects.
C32 mscLpSonetSectSevErroredFrmSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.7	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Frame Seconds (SSEFSs) that have been counted. A SSEFS is declared for second intervals containing one or more SEF defects.
C32 mscLpSonetSectSevErroredSec	1.3.6.1.4.1.562.36.2.1.12.14.17.1.5	Counter32	read-only	This attribute indicates the total number of Section Severely Errored Seconds (SSESs) that have been counted. A SSES is declared for second intervals containing more than x SCVs or one or more LOS or SEF defects. The value of x is 155 for a 155 Mbits/sec interface.
C32 mscLpSonetTestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpV35DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.9.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 mscLpV35TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
C32 mscLpX21DataXferStateChanges	1.3.6.1.4.1.562.36.2.1.12.10.16.1.5	Counter32	read-only	This attribute contains the number of times that the line has entered or exited the data transfer state.
C32 mscLpX21TestElapsedTime	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.1	Counter32	read-only	This attribute is the number of minutes elapsed since the test started for an externalLoop test. For a data test, this is the time since test data was first transmitted.
DisplayString (54)
STR mscLpComponentName	1.3.6.1.4.1.562.36.2.1.12.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3CBitComponentName	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1ComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3DS1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpDS3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1AudioComponentName	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ChanCellComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ChanComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ChanFlmComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ChanTcComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ChanTestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1ComponentName	1.3.6.1.4.1.562.36.2.1.12.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1DspComponentName	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE1TestComponentName	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE3CellComponentName	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE3ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE3G832ComponentName	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE3PlcpComponentName	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpE3TestComponentName	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpEngComponentName	1.3.6.1.4.1.562.36.2.1.12.23.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpEngDsComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpEngDsOvComponentName	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpHssiComponentName	1.3.6.1.4.1.562.36.2.1.12.17.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpHssiTestComponentName	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpJT2CellComponentName	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpJT2ComponentName	1.3.6.1.4.1.562.36.2.1.12.16.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpJT2TestComponentName	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSdhComponentName	1.3.6.1.4.1.562.36.2.1.12.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSdhPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSdhPathComponentName	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSdhTestComponentName	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSonetComponentName	1.3.6.1.4.1.562.36.2.1.12.14.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSonetPathCellComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSonetPathComponentName	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpSonetTestComponentName	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpV35ComponentName	1.3.6.1.4.1.562.36.2.1.12.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpV35TestComponentName	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpX21ComponentName	1.3.6.1.4.1.562.36.2.1.12.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STR mscLpX21TestComponentName	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
EnterpriseDateAndTime (1)
ENT mscLpScheduledSwitchover	1.3.6.1.4.1.562.36.2.1.12.103.1.5	EnterpriseDateAndTime	read-only	This attribute indicates the execution time of the scheduled switchover. When there is no switchover scheduled the time is equals to 0 (0000-00-00 00:00).
Gauge32 (41)
G32 mscLpCpuUtil	1.3.6.1.4.1.562.36.2.1.12.104.1.2	Gauge32	read-only	This attribute indicates an approximation of the current processor utilization level (expressed as a percentage).
G32 mscLpCpuUtilAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.3	Gauge32	read-only	This attribute indicates an average processor utilization level over the specified time period, timeInterval. This average is calculated based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.5	Gauge32	read-only	This attribute indicates the maximum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 mscLpCpuUtilAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.4	Gauge32	read-only	This attribute indicates the minimum processor utilization level over a specified time period, timeInterval. This is based on one minute CPU utilization averages.
G32 mscLpDS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 mscLpDS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3DS1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 mscLpDS3DS1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpDS3DS1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE1ChanActualChannelSpeed	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1.1	Gauge32	read-only	This attribute displays the measured link speed of the Channel component.
G32 mscLpE1ChanCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE1ChanCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE3CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpE3CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpHssiActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock. Note the reported receive speed is in an error of +/- 10000 bit/s
G32 mscLpHssiActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock. Note the reported transmit speed is in an error of +/- 10000 bit/s
G32 mscLpJT2CellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpJT2CellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpLocalMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.10	Gauge32	read-only	This attribute indicates the processor's current memory utilization of message blocks which are used for local messaging on the card.
G32 mscLpLocalMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.11	Gauge32	read-only	This attribute indicates the processor's average memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMax	1.3.6.1.4.1.562.36.2.1.12.104.1.13	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpLocalMsgBlockUsageMin	1.3.6.1.4.1.562.36.2.1.12.104.1.12	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of message blocks used for local messaging on the card, calculated over a specified time period, timeInterval. This utilization value is updated at 15 second intervals. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, localMsgBlockUsage.
G32 mscLpMemoryUsageAvgMaxValue	1.3.6.1.4.1.562.36.2.1.12.278.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMaxTable.
G32 mscLpMemoryUsageAvgMinValue	1.3.6.1.4.1.562.36.2.1.12.277.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgMinTable.
G32 mscLpMemoryUsageAvgValue	1.3.6.1.4.1.562.36.2.1.12.276.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageAvgTable.
G32 mscLpMemoryUsageValue	1.3.6.1.4.1.562.36.2.1.12.245.1.2	Gauge32	read-only	This variable represents an individual value for the mscLpMemoryUsageTable.
G32 mscLpMsgBlockUsage	1.3.6.1.4.1.562.36.2.1.12.104.1.6	Gauge32	read-only	This attribute indicates the processor's current shared message block memory utilization. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvg	1.3.6.1.4.1.562.36.2.1.12.104.1.7	Gauge32	read-only	This attribute indicates the processor's average memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this average memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMax	1.3.6.1.4.1.562.36.2.1.12.104.1.9	Gauge32	read-only	This attribute indicates the processor's maximum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this maximum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpMsgBlockUsageAvgMin	1.3.6.1.4.1.562.36.2.1.12.104.1.8	Gauge32	read-only	This attribute indicates the processor's minimum memory utilization of shared message blocks, calculated over a specified time period, timeInterval. This utilization value is calculated using 15 second samples. At the start of each timeInterval, this minimum memory utilization is reset to the current usage, sharedMsgBlockUsage. If there is no shared memory on the card, this attribute indicates 0.
G32 mscLpSdhPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpSdhPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpSonetPathCellReceiveCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.3	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells received on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpSonetPathCellTransmitCellUtilization	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1.4	Gauge32	read-only	This attribute is the ratio of the number of valid, assigned cells transmitted on the link to the nominal link capacity. The utilization is calculated over a period of one minute. This attribute is always set to 0 when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
G32 mscLpV35ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 mscLpV35ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
G32 mscLpX21ActualRxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.4	Gauge32	read-only	This attribute is the measured speed of the receive clock.
G32 mscLpX21ActualTxLineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.16.1.3	Gauge32	read-only	This attribute is the measured speed of the transmit clock.
Hex (17)
HEX mscLpDS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX mscLpDS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpDS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpDS3DS1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX mscLpDS3DS1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpDS3DS1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpDS3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpE1ChanTcReplacementData	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.1	Hex	read-write	This attribute specifies the trunk conditioning data byte to be substituted into the timeslots defined by the Chan component under fault conditions. replacementData can be set to any two digit hexadecimal number. The following are recommended values: DS1 MUX Out Of Service Code = 0x1A E1 MUX Out Of Service Code = 0xFF
HEX mscLpE1ChanTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpE1TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpE3TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpHssiTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpJT2TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpSdhTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpSonetTestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpV35TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
HEX mscLpX21TestCustomizedPattern	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.5	Hex	read-write	This attribute allows a customized 32 bit pattern to be defined for use in the test data frames. This attribute is used when the attribute frmPatternType is set to CustomizedPattern. Note that a 55 hex pattern is an alternating 1 and 0 pattern.
INTEGER (360)
INT mscLpAdminState	1.3.6.1.4.1.562.36.2.1.12.102.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1AdminState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpDS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpDS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpDS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT mscLpDS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpDS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigOneTable specific index for the mscLpDS1ChanTcSigOneTable.
INT mscLpDS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS1ChanTcSigTwoTable specific index for the mscLpDS1ChanTcSigTwoTable.
INT mscLpDS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpDS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpDS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT mscLpDS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.7.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pDS1Atm card, which it defaults to local. On a 3pDS1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4DS1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT mscLpDS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.7.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpDS1LineType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 line. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. unframed defines an unknown framing pattern for clear channels. For cell-based cards only the default option esf is permitted.
INT mscLpDS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1RaiAlarmType	1.3.6.1.4.1.562.36.2.1.12.7.10.1.4	INTEGER	read-write	This attribute defines the method of sending a RAI (Remote Alarm Indication) alarm on a DS1 line. When SBit is selected, RAI alarm is sent by setting the S bit in frame 12. When Bit2 is selected, RAI alarm is sent by setting bit 2 in all timeslots to 0. When fdl is selected, RAI alarm is sent by a repeating pattern of 00 hex and FF hex on the FDL link. Note that for lineType of d4, only the SBit and the Bit2 methods are applicable. Whereas for lineType of esf, only the Bit2 and the fdl methods are applicable. SBit method is recommended if lineType is set to d4 and zeroCoding is set to ami. This will help to avoid potential mimic RAI alarm when 1's density is too low in the data transmitted. For cell-based cards only the default value fdl is permitted.
INT mscLpDS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpDS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.7.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpDS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpDS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS1TestType	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpDS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.7.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
INT mscLpDS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS1UsageState	1.3.6.1.4.1.562.36.2.1.12.7.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.7.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 line. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. b8zs substitutes a pattern of bipolar violations if more than 7 zeros in a row are to be transported. ami specifies Alternate Mark Inversion, in which successive marks (ones) alternate between positive and negative polarity voltage signals, and spaces (zeros) are sent as a zero amplitude signal. When zeroCoding is set to ami and lineType is set to d4, it is recommended that raiAlarmType be set to SBit in order to avoid possible mimic RAI alarm. For cell-based cards only the default value b8zs is permitted.
INT mscLpDS3AdminState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3CBitFarEndAlarm	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.1	INTEGER	read-only	This attribute indicates the Far-End alarm signal that is currently received at the DS3 interface. This signal is carried over the Far- End Alarm and Control (FEAC) bits of DS3 frames. Five far-end alarm signals can be received: far-end equipment failure that is received when the far-end terminal has detected a local equipment failure; far-end Loss Of Signal (LOS) that is received when the far- end DS3 terminal has declared a LOS failure condition; far-end Loss of Frame (LOF) when the far-end DS3 terminal has declared a Loss Of Frame (LOF) failure condition; far-end Alarm Indication Signal (AIS) when the far-end has declared an AIS failure condition; far-end Idle when the far-end has declared an Idle signal condition.
INT mscLpDS3CbitParity	1.3.6.1.4.1.562.36.2.1.12.5.10.1.1	INTEGER	read-write	This attribute indicates if C-Bit parity has been turned ON or OFF. The CBIT component will appear under the DS3 component when the cbitParity attribute is set to on.
INT mscLpDS3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpDS3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpDS3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.10.1.3	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the DS3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming DS3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for all ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. If there is no NS component provisioned, the default value for this attribute will be local. If the NS component has been provisioned, the default value is module, except for the 1pDS3C cards. For the 1pDS3C cards, the default and only valid value for this attribute is local. The clockingSource of the DS1 sub-component becomes the effective clocking source for this attribute. All the DS1 sub-components have the same clocking source.
INT mscLpDS3DS1AdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpDS3DS1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpDS3DS1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpDS3DS1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3DS1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT mscLpDS3DS1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpDS3DS1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigOneTable specific index for the mscLpDS3DS1ChanTcSigOneTable.
INT mscLpDS3DS1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpDS3DS1ChanTcSigTwoTable specific index for the mscLpDS3DS1ChanTcSigTwoTable.
INT mscLpDS3DS1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3DS1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpDS3DS1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpDS3DS1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3DS1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3DS1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3DS1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT mscLpDS3DS1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3DS1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.3	INTEGER	read-write	This attribute defines the source of the transmit clock for the DS1 tributary. When the clocking source is selected from local, the crystal on the port generates the clocking for the DS1 tributary. When the clocking source is selected from line, the port synchronizes to the clock from the DS1 tributary. When the clocking source is selected from module, the ports clock synchronizes to the clock provided by the oscillator on the active CP. On a 1pDS3C card, if the NetworkSynchronization (NS) component is present the default value of this attribute will be module otherwise it will be line. On a 2pDS3cAal or 4pDS3ChAtm card, the only valid values are local and module. If the NS component is present the default value of this attribute will be module otherwise it will be local. On a 4pDS3ChAtm card the clocking source for all DS1 and all DS3 components on card must be the same, except when a DS1 is using line as a clocking source.
INT mscLpDS3DS1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1LineType	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.1	INTEGER	read-write	This attribute defines the framing of the DS1 tributary. d4 defines a framing pattern of 12 frames per multiframe. esf defines a framing pattern of 24 frames per multiframe. d4Cas defines a framing pattern of 12 frames per multiframe with channel associated signalling. esfCas defines a framing pattern of 24 frames per multiframe with channel associated signalling. For the 4pDS3ChAtm card, only d4 and esf framing patterns are permitted.
INT mscLpDS3DS1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (2 out of 5 framing bits in error ) have been detected for 3 seconds +/- 0.5 seconds. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.1	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpDS3DS1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3	INTEGER	read-only	This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpDS3DS1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3DS1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3DS1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3DS1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpDS3DS1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpDS3DS1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3DS1TestType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3DS1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3DS1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the tributary is in a locked state.
INT mscLpDS3DS1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5	INTEGER	read-only	This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributary detects a LOF alarm condition.
INT mscLpDS3DS1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3DS1UsageState	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3DS1ZeroCoding	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1.2	INTEGER	read-write	This attribute defines the zero encoding on the DS1 tributary. bit7Stuffing sets bit 7 of every timeslot to a one to guarantee ones's density. This reduces the available bandwidth of the channel by 1/8. none does no zero encoding.
INT mscLpDS3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.5.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpDS3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A SEF defect is detected when 3 (or more) out of 16 (or fewer) F-bits are in error, or one (or more) M-bits in two (or more) out of four (or fewer) consecutive M-frames are in error. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the DS3 line interface upon observing 175 +/- 75 continuous pulse positions with no pulses of either positive or negative polarity. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3Mapping	1.3.6.1.4.1.562.36.2.1.12.5.10.1.5	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the DS3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the DS3 component when this attribute is set to plcp. This attribute will be ignored when set on frame-based cards.
INT mscLpDS3OperationalState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpDS3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpDS3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpDS3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is the occurrence of AIS (valid DS3 frame with payload containing the 1010...sequence and with C-Bits set to zero) in contiguous M-frames for a time greater than 100 milliseconds. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected, the node also transmits the far-end SEF/AIS defect indicator over the outgoing line. When not running in C-Bit Parity mode, the txRai attribute is also set to on when transmitting the far- end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3RxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.5	INTEGER	read-only	This attribute displays whether an Idle failure condition has been reported on the DS3 port. An Idle condition is reported when DS3 Idle defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The DS3 Idle defect is the occurrence of a valid DS3 frame with the information bits set to a 11001100.. sequence. If the DS3 Idle defects are intermittently occurring, the DS3 Idle defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the Idle failure condition is cleared. The failure condition is cleared when the DS3 idle pattern has not been detected for at least 10 seconds +/- 0.5 seconds. The rxIdle attribute is always set to off when the component has been locked and left offline. The idle pattern indicates that the far-end is physically connected but not put in service. For instance, DS3 idle is transmitted on the outgoing line when the DS3 component is locked and not used for operational testing.
INT mscLpDS3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.5.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. When not running the C-Bit Parity mode, the RAI alarm state is entered when the far-end SEF/AIS defect indicator has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming DS3 line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The DS3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end SEF/AIS defect indicator has not been detected for 10 seconds +/- 0.5 seconds. When running the C-Bit Parity mode, the RAI alarm state is entered upon detection of a far-end alarm over the Far-End Alarm and Control (FEAC) channel. The RAI alarm state is exited as soon as no more far-end alarm is detected on the FEAC channel. The far- end alarms that can be detected on the FEAC channel and that cause the RAI alarm state to be entered are: equipment failure alarm (service affecting), LOS alarm, LOF alarm, idle and AIS alarm. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpDS3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.5.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpDS3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpDS3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpDS3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpDS3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpDS3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpDS3TestType	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpDS3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpDS3TxAis	1.3.6.1.4.1.562.36.2.1.12.5.16.1.6	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm is being transmitted on the DS3 line. Currently, AIS is never transmitted by a Passport DS3 node.
INT mscLpDS3TxIdle	1.3.6.1.4.1.562.36.2.1.12.5.16.1.8	INTEGER	read-only	This attribute displays whether the DS3 Idle signal is transmitted over the outgoing line. DS3 Idle is sent when the DS3 component has been locked and not used in operational testing.
INT mscLpDS3TxRai	1.3.6.1.4.1.562.36.2.1.12.5.16.1.7	INTEGER	read-only	When not running C-Bit Parity mode, this attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the DS3 component has been unlocked or used in operational testing. When running in C-Bit Parity mode, this attribute displays whether a far-end alarm is sent over the Far-End Alarm and Control (FEAC) channel when the DS3 component has been unlocked or used in operational testing. When the DS3 component is locked and not used in operational testing, this attribute is always set to off.
INT mscLpDS3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpDS3UsageState	1.3.6.1.4.1.562.36.2.1.12.5.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1AdminState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ChanAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ChanCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpE1ChanCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpE1ChanCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpE1ChanFlmABitMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.1	INTEGER	read-write	This attribute controls the monitoring of A-bit defects.
INT mscLpE1ChanFlmFlmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1.1	INTEGER	read-only	This attribute indicates the status of a Frame Relay channel on an E1 line. By combining the E1 channel-associated-signalling (CAS) A-bits status, and HDLC defect, a single value indicates the likely cause of the failure. This mechanism assumes that the far end equipment loops back signaling A-bits for some or all of the timeslots in a channel. The A-bits in channel are transmitted as '0'. If they are all received as '0', it is assumed that the E1 link is up in both directions. The presence of HDLC frames indicates that the service is connected. When A-bits and HDLC frames are correctly received, frameLinkUp is indicated. When neither are received, frameLinkDown is indicated. When HDLC frames are not receive but A-bits are not at fault, lossOfHdlc is indicated. When HDLC frames are received, but there is a fault in the any of timeslot's A-bits on a channel lossOfAbit is indicated.
INT mscLpE1ChanFlmHdlcMonitoring	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1.2	INTEGER	read-write	This attribute controls the monitoring of HDLC defect.
INT mscLpE1ChanIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpE1ChanOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ChanSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE1ChanStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE1ChanTcEgressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.2	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the PDH line. When trunk conditioning is being locally generated towards the PDH line, egressConditioning is set to on. When trunk conditioning is not being locally generated towards the PDH line, egressConditioning is set to off. Trunk conditioning is transmitted towards the PDH line under the following conditions: bufferUnderflow (BU) AAL1 protocol errors.
INT mscLpE1ChanTcIngressConditioning	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1.1	INTEGER	read-only	This attribute indicates the status of locally generated trunk conditioning towards the ATM network. When trunk conditioning is being locally generated towards the ATM network, ingressConditioning is set to on. When trunk conditioning is not being locally generated towards the ATM network, ingressConditioning is set to off. Trunk conditioning is transmitted towards the ATM network under the following conditions: lossOfSignal (LOS) lossOfFrame (LOF) remoteAlarmIndication (RAI) alarmIndicationSignal (AIS) bufferUnderflow (BU) and in addition for E1: lossOfMultiframe (LOMF) receiveMultiframeRemoteAlarmIndication (RMRAI)
INT mscLpE1ChanTcSigOneIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigOneTable specific index for the mscLpE1ChanTcSigOneTable.
INT mscLpE1ChanTcSigTwoIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.1	INTEGER	not-accessible	This variable represents the mscLpE1ChanTcSigTwoTable specific index for the mscLpE1ChanTcSigTwoTable.
INT mscLpE1ChanTestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE1ChanTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpE1ChanTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpE1ChanTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE1ChanTestType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE1ChanTestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE1ChanTimeslotDataRate	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.2	INTEGER	read-write	This attribute selects the data rate of the timeslots in a channel of a DS1 component. For E1, the data rate of the timeslots will always be 64kbit/s regardless of this attribute. When doNotOverride is selected for a channel on a DS1, the data rate of the channel's timeslots are dependant on the zeroCoding selection of the DS1 component. If the zeroCoding is B8ZS (where supported on the FP) or none, the timeslot's data rate will be 64kbit/ s. If the zeroCoding option is bit7Stuffing, the data rate of a timeslot will be 56kbit/s. When 56k is selected for a channel on a DS1, the least significant bit of each timeslot of this Channel will always be set to 1 and not used for data. The data rate for the timeslots of this channel is therefore restricted to 56kbit/s. One application of this attribute is to allow a DS1 line to support mixing channels that originate from lines that use different zeroCoding schemes.
INT mscLpE1ChanUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE1ChanUsageState	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1ClockingSource	1.3.6.1.4.1.562.36.2.1.12.8.10.1.2	INTEGER	read-write	This attribute defines the source of the transmit clock for the E1 line. When local is selected, the crystal on the port generates the clocking for the line. When line is selected, the port synchronizes to the clock from the facility. When module is selected, the ports clock synchronizes to the clock provided by the oscillator on the active CP. When otherPort is selected, the port synchronizes to the port with a clocking source of line. When srtsMode is selected, the port transmit frequency depends on the SRTS (Synchronous Residual Time-Stamp) received over the ATM network. SRTS information is also generated sent over the ATM network. When adaptiveMode is selected, the port transmit frequency continually adapts to match the egress data received from the ATM network. A port with srtsMode or adaptiveMode must have a single Chan which may be linked only to an Aal1Ces.service with serviceType unstructured If the NetworkSynchronization component is present, the default value of this attribute is module, otherwise it defaults to line, except for the 3pE1Atm card, which it defaults to local. On a 3pE1Atm card all ports must have the same value, and be either local or module. otherPort is valid only on AAL1 cards. srtsMode is valid only on AAL1 and Multi-Service Access cards. adaptiveMode is valid only on Multi-Service Access cards. On 4E1Aal1 cards either: all four ports' clockingSource values must be local OR all four ports' clockingSource values must be module OR one port's clockingSource value must be line and the other three must be otherPort. A port can only have srtsMode selected if the other ports are module or srtsMode.
INT mscLpE1Crc4Mode	1.3.6.1.4.1.562.36.2.1.12.8.10.1.3	INTEGER	read-write	This attribute defines whether the CRC-4 checking and generation on the E1 line is enabled or disabled. The default CRC-4 mode is off except for the cell-based cards which default to on as per the ATM Forum.
INT mscLpE1IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.8.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpE1LineType	1.3.6.1.4.1.562.36.2.1.12.8.10.1.1	INTEGER	read-write	This attribute specifies the framing of the E1 line. When cas (channel associated signalling) is selected, timeslot 16 is reserved for multiframe signalling and only 30 timeslots are available for data. The signalling bits are not interpreted. When ccs (common channel signalling) is selected, timeslot 16 is not reserved for multiframe signalling and 31 timeslots are available for data. The signalling bits are not interpreted. When unframed is selected, a clear channel is defined whereby data from all timeslots including the framing data (in timeslot 0) and timeslot 16 are passed transparently. This value is valid only for AAL1 cards. For cell-based cards the ATM Forum specifies that timeslot 16 be reserved, leaving 30 timeslots available for data. The default value is cas except for the 8pE1Atm card, for which the default and only valid value is ccs.
INT mscLpE1LofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.3	INTEGER	read-only	This attribute displays whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF defects (for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive frame alignment patterns in error) have been detected for 3 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOF alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOF alarm state The condition is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds.
INT mscLpE1LosAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 seconds (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: 2.5 seconds +/- 0.5 seconds). A LOS defect is detected upon observing all zeros for 150 ms (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: upon observing 175 +/- 75 pulse positions with no pulses of either positive or negative polarity). If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. Also, an RAI alarm is transmitted to the far end for the duration of the LOS alarm state. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpE1MultifrmLofAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.1	INTEGER	read-only	This attribute indicates whether a multiframe LOF (loss of frame) alarm state is entered. A multiframe LOF alarm state is entered when a multiframe LOF defect (2 consecutive errors in the multiframe alignment signal) has been detected and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe LOF defects are intermittently occurring, the multiframe LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The alarm is cleared when the defect is not detected for 10 seconds +/- 0.5 seconds. When the multiframe LOF alarm is on, a multiframe RAI alarm indicator is transmitted on the line. The 8pE1Atm card does not support the multiframe LOF alarm.
INT mscLpE1OperationalState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE1RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.2	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/ - 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period (for 8pDS1Atm cards: when both an Out Of Frame condition exists and a 1's density of at least 99.9% is present for a time T, where 3 ms T 75 ms; for 8pE1Atm cards: when both an Out Of Frame condition exists and fewer than three 0's have been received in 512 bit periods). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds.
INT mscLpE1RxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.2	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm state has been entered. A multiframe RAI alarm state is entered when a multiframe RAI alarm indicator (bit 6 of timeslot 16 in frame 0 is set to a one) is observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the multiframe RAI indicator is intermittently received, the multiframe RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The multiframe RAI alarm condition is cleared when the multiframe RAI alarm indication is not received for 10 seconds +/- 0.5 seconds. The multiframe RAI alarm is usually an indication that the far end facility is unable to gain multiframe synchronization. The 8pE1Atm card does not support the multiframe RAI alarm.
INT mscLpE1RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.4	INTEGER	read-only	This attribute displays whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered when the RAI defect indicator has been observed and accumulated for 3.5 seconds +/- 0.5 seconds. For 3pDS1Atm, and 8pDS1Atm cards: alarm is declared immediately upon observing the defect is present, with no integration time. For 3pE1Atm, and 8pE1Atm cards: alarm state is entered when the RAI defect indicator has been observed and accumulated for 2.5 seconds +/- 0.5 seconds. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The RAI alarm state is cleared when the RAI defect indicator has been absent for 10 seconds +/- 0.5 seconds (for 3pDS1Atm, and 8pDS1Atm cards: alarm is cleared immediately upon observing the defect is absent, with no integration time). The RAI alarm is usually an indication that the far end facility is unable to gain synchronization.
INT mscLpE1SendRaiOnAis	1.3.6.1.4.1.562.36.2.1.12.8.10.1.4	INTEGER	read-write	This attribute defines whether the Remote Alarm Indicator (RAI) will be sent when receiving an AIS alarm. The value is yes by default; it can be changed to no only for ports on J2MV cards.
INT mscLpE1SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.8.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE1StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE1TestAdminState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE1TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpE1TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpE1TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE1TestType	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE1TestUsageState	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE1TxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.5	INTEGER	read-only	This attribute displays whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transmitted when the port is in a locked state.
INT mscLpE1TxMultifrmRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.17.1.3	INTEGER	read-only	This attribute displays whether a multiframe RAI (remote alarm indicator) alarm is being sent on the E1 line. This is transmitted when the E1 port detects a multiframe LOF condition. The 8pE1Atm card does not generate the multiframe RAI alarm.
INT mscLpE1TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.8.16.1.6	INTEGER	read-only	This attribute displays whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the port detects a LOF alarm condition (for 3pDS1Atm, 3pE1Atm, 8pDS1Atm, and 8pE1Atm cards: RAI is transmitted when the port detects a LOS, LOF, or AIS condition).
INT mscLpE1UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE1UsageState	1.3.6.1.4.1.562.36.2.1.12.8.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE3AdminState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE3CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpE3CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpE3CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpE3ClockingSource	1.3.6.1.4.1.562.36.2.1.12.6.10.1.2	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the E3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means use of a signal phase-locked to the incoming E3 line rate; module means the use of a signal phase-locked to the CP reference clock. Note that the multiport cell-based cards have one common clock source for each of the three ports. For this reason, the following rules apply for the value of clockingSource across the board's three ports: All three clockingSource values must be 'local' OR All three clockingSource values must be 'module' OR One clockingSource value must be 'line' and the other two must be 'otherPort'. The default value for this attribute will be module if a CP clock is available, and local otherwise.
INT mscLpE3Framing	1.3.6.1.4.1.562.36.2.1.12.6.10.1.5	INTEGER	read-write	This attribute indicates if the framing mode will be in accordance with the CCITT G.751 or G.832 specification. The G832 component will appear under the E3 component when this attribute is set to g832. This attribute may only be set on cell-based card types. Note also that this attribute may only be set to g751 if the mapping attribute is set to plcp. The default value of this attribute will be g751 for frame-based cards, and g832 for cell-based cards. Note: when E3 framing is changed from g832 to g751, the G832 component must be deleted.
INT mscLpE3G832TimingMarker	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.3	INTEGER	read-only	Indicates whether or not the timing source at the far-end node is traceable to a Primary Reference Clock. The timingMarker indication is controlled by the timing marker bit in the G832 MA byte. If the received timing marker bit is 1 for five consecutive frames, and five consecutive 0s are not received for two seconds, the timingMarker indication will be set to not traceable. If the received timing marker bit is 0 for five consecutive frames and five consecutive 1s are not received for two seconds, the timingMarker indication will be set to traceable.
INT mscLpE3G832TrailTraceMismatch	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.2	INTEGER	read-only	This attribute displays whether the Trail Trace Mismatch (TTM) alarm state has been entered. The TTM alarm state is entered when TTM defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The TTM defect is reported when the trail access point identifier contained in the Trail Trace (TR) field in the received frame fails to agree with the expected identifier. If the TTM defects are intermittently occurring, the TTM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The TTM alarm is cleared when the trail access point identifier in the received frame agrees with the expected identifier for a period of 10 seconds +/- 0.5 seconds. The trailTraceMismatch attribute is always set to off when the E3 component has been locked and left offline. Both the expected trail access identifier and the transmitted trail access identifier are provisionable attributes of the G832 component.
INT mscLpE3G832UnexpectedPayloadType	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1.1	INTEGER	read-only	This attribute displays whether the Unexpected Payload Type (UPT) alarm state has been entered. The UPT alarm state is entered when UPT defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The UPT defect is reported when a received frame fails to agree with the expected Payload Type. If the UPT defects are intermittently occurring, the UPT defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle.. The UPT alarm is cleared when the Payload Type in the received frame agrees with the expected Payload Type for a period of 10 seconds +/- 0.5 seconds. The unexpectedPayloadType attribute is always set to off when the E3 component has been locked and left offline.
INT mscLpE3IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.6.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpE3LofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely Errored Frame (SEF) defects have been detected and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An E3 SEF defect is reported after detecting Frame Alignment Signal (FAS) errors on 4 consecutive E3 frames received on the incoming line. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when E3 framing has been achieved for a period of 10 seconds +/- 0.5 seconds. As long as SEF defects are detected, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3LosAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects has been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is detected at the E3 line interface upon observing N continuous pulse positions with no pulses of either positive or negative polarity, where N is between 10 and 255. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared when the LOS defects are absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3Mapping	1.3.6.1.4.1.562.36.2.1.12.6.10.1.4	INTEGER	read-write	This attribute indicates if ATM cells will be mapped directly into the E3 payload, or whether PLCP mapping will be used. The PLCP component will appear under the E3 component when this attribute is set to plcp. This attribute will be ignored when set on frame- based cards.
INT mscLpE3OperationalState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpE3PlcpLofAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.1	INTEGER	read-only	This attribute displays whether a PLCP Loss Of Frame (LOF) failure alarm state has been entered. An LOF failure is declared when a PLCP LOF defect persists for 2.5 s +/- 0.5 s. An LOF defect occurs when an OOF (Out of Frame) state persists for more than 1 ms. If the OOF events are intermittent, the LOF defect counter is decremented at a rate of 1/12 (for DS3 PLCP) or 1/9 (for G.751 E3 PLCP) of the incrementing rate, with all measurements based on a 200 ms polling cycle. An OOF event (also known as a PLCP SEF event) is declared when an error is detected in both the A1 and A2 octets, or when two consecutive POHIDs are found in error. OOF is removed when two valid sets of framing octets and two valid and sequential POHID octets have been found. The LOF defect is removed when the defect counter reaches zero, i.e. when OOF events are absent for more than 12 ms (DS3 PLCP) or 9 ms (G.751 E3 PLCP). LOF failure alarm is cleared when LOF defect is absent for 10.0 s +/- 0.5 s The DS3 or E3 component goes into an operational state of disabled until the LOF failure alarm is cleared. The terminal declaring the LOF failure alarm will transmit a PLCP RAI signal to the far-end for the duration of the alarm. The lofAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpE3PlcpRxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1.2	INTEGER	read-only	This attribute displays whether a PLCP Remote Alarm Indication (RAI) failure alarm state has been entered. An RAI failure alarm occurs when ten consecutive PLCP RAI bits (bit 5 in the G1 byte) are high on the incoming line. An RAI failure alarm is cleared when ten consecutive RAI bits are set to 0. Note: Some standards call this alarm RFI. The rxRaiAlarm attribute is always set to off when the DS3 or E3 component has been locked and left offline.
INT mscLpE3RxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.3	INTEGER	read-only	This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.6.16.1.4	INTEGER	read-only	This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when far- end SEF/AIS defects (or Far-End Receive Failure (FERF) defects in G.832 E3 Framing mode) have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the E3 incoming line. If the RAI defects are intermittently occurring, the RAI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the RAI alarm condition is cleared. The condition is cleared when the far-end defect indicator has not been detected for 10 seconds +/- 0.5 seconds. The declaration of a RAI Alarm is usually a signal that the far end facility is unable to gain synchronization. The rxRaiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpE3SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.6.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpE3StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpE3TestAdminState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpE3TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpE3TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpE3TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpE3TestType	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpE3TestUsageState	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpE3TxAis	1.3.6.1.4.1.562.36.2.1.12.6.16.1.5	INTEGER	read-only	This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when the E3 component is locked and not used for operational testing.
INT mscLpE3TxRai	1.3.6.1.4.1.562.36.2.1.12.6.16.1.6	INTEGER	read-only	This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component has been unlocked or used in operational testing. When the E3 component is locked and not used in operational testing, this attribute is always set to off. The far-end SEF/AIS defect indicator is transmitted over the outgoing line when SEF/AIS defects are detected on the incoming line. In G.832 E3 Framing mode, the FERF bit is set to '1' to transmit the SEF/AIS defect indicator.
INT mscLpE3UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpE3UsageState	1.3.6.1.4.1.562.36.2.1.12.6.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpEngDsIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.10	INTEGER	not-accessible	This variable represents the index for the mscLpEngDs tables.
INT mscLpHssiActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The port behaves as a dce or dte according to the actualLinkMode.
INT mscLpHssiAdminState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpHssiIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.17.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpHssiLinkMode	1.3.6.1.4.1.562.36.2.1.12.17.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the HSSI port. The actual gender of the port is determined by the hardware setup. In dte mode, the ta line signal is driven as specified by the attribute readyLineState when the HSSI port passes its diagnostics. The ta line signal is then driven as specified by the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal ca is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the Hssi component behaves similarly as when it is in dte mode. However, it will be driving the dce line signal (ca) and monitoring the dte line signal (ta) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpHssiOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpHssiSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.17.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpHssiStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpHssiTestAdminState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpHssiTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpHssiTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpHssiTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpHssiTestType	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpHssiTestUsageState	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpHssiUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpHssiUsageState	1.3.6.1.4.1.562.36.2.1.12.17.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpJT2AdminState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpJT2CellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpJT2CellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpJT2CellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpJT2ClockingSource	1.3.6.1.4.1.562.36.2.1.12.16.11.1.1	INTEGER	read-write	This attribute defines the source of the transmit clock for the JT2 line. When the clocking source is selected from local, the oscillator on the port generates the clocking for the line. When the clocking source is selected from line, the port synchronizes to the clock recovered from the incoming line signal. When the clocking source is selected from module, the port's clock synchronizes to the clock provided by the oscillator on the active CP. Note:- that when one port is set to local, the other port must also be set to local, and when one port is set to module, the other port must also be set to module. If one of the ports is set to line, the other port must be set to otherPort. Also, if a CP reference clock is available when the JT2 component is added, the clocking source defaults to module, whereas if a CP reference clock is not available when the component is added, the clocking source defaults to local.
INT mscLpJT2IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.16.12.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpJT2LofAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.2	INTEGER	read-only	This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are observed and accumulated for 2.5 seconds +/- 0.5 seconds or more. A LOF defect occurs when seven or more consecutive incorrect frame alignment patterns (4 multiframes) are received. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The LOF alarm is cleared when framing has been achieved for 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled for the duration of the LOF alarm condition. While the port is in the LOF alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2LosAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.1	INTEGER	read-only	This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOS defect is declared at the JT2 line interface when the input data is zero for 20 - 32 clock cycles. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. An LOS failure alarm is cleared when the LOS defect is absent for a period of 10 seconds +/- 0.5 seconds. The JT2 port goes into an operationalState of disabled for the duration of the LOS alarm condition. While the port is in the LOS alarm state, the port also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2OperationalState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpJT2RxAisPayloadAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.4	INTEGER	read-only	This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.3	INTEGER	read-only	This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line.
INT mscLpJT2RxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.5	INTEGER	read-only	This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signal is detected on the incoming JT2 Line (when 16 or more consecutive RAI patterns of 1111111100000000 are received on the 4 kbit/s data channel (m-bits) within the framing bits of the JT2 frame). The JT2 port goes into an operationalState of Disabled until the RAI alarm condition is cleared. The RAI alarm is cleared when four or more consecutive non-RAI patterns (anything other than 1111111100000000) are received.
INT mscLpJT2SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.16.13.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpJT2StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpJT2TestAdminState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpJT2TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpJT2TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpJT2TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpJT2TestType	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpJT2TestUsageState	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpJT2TxAisPhysicalAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.6	INTEGER	read-only	This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing.
INT mscLpJT2TxRaiAlarm	1.3.6.1.4.1.562.36.2.1.12.16.15.1.7	INTEGER	read-only	This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern is transmitted in the 4 kbit/s data channel (m-bits) when the port detects a LOS, AIS or LOF alarm condition.
INT mscLpJT2UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpJT2UsageState	1.3.6.1.4.1.562.36.2.1.12.16.14.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpMainCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.2	INTEGER	read-only	This attribute specifies the status of this LP's main card. The following values have been defined: notProvisioned No main card has been provisioned. notAvailable The main card is not available. available The main card is available (running as standby). active The main card is running as active.
INT mscLpMemoryCapacityIndex	1.3.6.1.4.1.562.36.2.1.12.244.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryCapacityTable specific index for the mscLpMemoryCapacityTable.
INT mscLpMemoryUsageAvgIndex	1.3.6.1.4.1.562.36.2.1.12.276.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgTable specific index for the mscLpMemoryUsageAvgTable.
INT mscLpMemoryUsageAvgMaxIndex	1.3.6.1.4.1.562.36.2.1.12.278.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMaxTable specific index for the mscLpMemoryUsageAvgMaxTable.
INT mscLpMemoryUsageAvgMinIndex	1.3.6.1.4.1.562.36.2.1.12.277.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageAvgMinTable specific index for the mscLpMemoryUsageAvgMinTable.
INT mscLpMemoryUsageIndex	1.3.6.1.4.1.562.36.2.1.12.245.1.1	INTEGER	not-accessible	This variable represents the mscLpMemoryUsageTable specific index for the mscLpMemoryUsageTable.
INT mscLpOperationalState	1.3.6.1.4.1.562.36.2.1.12.102.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpRestartOnCpSwitch	1.3.6.1.4.1.562.36.2.1.12.103.1.4	INTEGER	read-only	This attribute indicates whether the Lp always restarts upon a CP switchover. The value is true if the featureList of the associated Sw Lpt component contains a feature that does not support hitless CP switchover. The value is also true when the feature noHitlessCpSwitch is provisioned on the CP. A value of false does not guarantee 'no restart'; dynamic conditions may still result in an FP restart when a CP switchover occurs.
INT mscLpSdhAdminState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhClockingSource	1.3.6.1.4.1.562.36.2.1.12.15.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
INT mscLpSdhIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpSdhLofAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhLosAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhPathAdminState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpSdhPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpSdhPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpSdhPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpSdhPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSdhPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSdhPathTxAis	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSdhPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSdhPathUsageState	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSdhRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.15.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSdhStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSdhTestAdminState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpSdhTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpSdhTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpSdhTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpSdhTestType	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpSdhTestUsageState	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpSdhTxAis	1.3.6.1.4.1.562.36.2.1.12.15.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSdhTxRdi	1.3.6.1.4.1.562.36.2.1.12.15.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSdhUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.15.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSdhUsageState	1.3.6.1.4.1.562.36.2.1.12.15.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetAdminState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetClockingSource	1.3.6.1.4.1.562.36.2.1.12.14.10.1.1	INTEGER	read-write	This attribute defines the type of clocking source used for synchronizing the OC-3 transmit clock: local means direct use of the local clock oscillator at its centre frequency; line means the use of a signal phase-locked to the incoming OC-3 line rate; module means the use of a signal phase-locked to the CP reference clock. When adding a Sonet/Sdh component, the clockingSource attribute is set to module if the NetworkSynchronization component has been added and is set to local otherwise. Note that the multiport OC-3 cell-based cards has one common clock source for each of the three ports when either the clocking source local or module is selected. For this reason, it is not allowed to have at the same time the clockingSource attribute set to local on one port and module on another port. Furthermore, the clockingSource attribute cannot be set to module if the NetworkSynchronization component has not been added.
INT mscLpSonetIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpSonetLofAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.2	INTEGER	read-only	This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when LOF defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, except when an LOS defect or failure is present. An LOF defect is detected when getting contiguous errored frame alignment for at least 3 msec. If the LOF defects are intermittently occurring, the LOF defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOF alarm condition is cleared. The condition is cleared when framing has been achieved for a period of 10 seconds +/- 0.5 seconds. The lofAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetLosAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.1	INTEGER	read-only	This attribute indicates whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds, or if an LOS defect is present when the criteria for LOF failure declaration have been met. A LOS defect is declared when 20+/-3 us of all-zeros pattern is detected. The LOS defect is cleared when two valid framing words are detected and no Loss Of Signal condition is detected during an interval of 20+/-3 us. If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the LOS alarm condition is cleared. The LOS alarm state is cleared after LOS defects have been absent for a period of 10 seconds +/- 0.5 seconds. The losAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetPathAdminState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetPathCellCorrectSingleBitHeaderErrors	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.3	INTEGER	read-write	This attribute specifies whether the port corrects single bit errors detected in the headers of received cells. If single bit errors are corrected, the affected cells are passed up to the ATM layer according to normal operation. If single bit errors are not corrected, these errored cells are discarded by the physical layer. Note that cells containing multiple bit errors in their headers are always discarded. Single bit HEC error correction must remain off for the following card types: 3pDS1Atm, 8pDS1Atm, 3pE1Atm, 8pE1Atm, 2pJ6MAtm, 3pDS3Atm, and 3pE3Atm.
INT mscLpSonetPathCellLcdAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1.1	INTEGER	read-only	This attribute displays whether the Loss of Cell Delineation (LCD) failure alarm state has been entered. This state is entered when LCD defects have been observed and accumulated for a period of time specified through the alarmActDelay attribute. In ATM cell direct mapping mode, an LCD defect occurs when Out of Cell Delineation (OCD) anomaly persists for x milliseconds, and disappears when the Out of Cell Delineation (OCD) is absent for x msec. An OCD anomaly occurs when 7 consecutive incorrect HECs have been detected. An OCD anomaly terminates when 6 consecutive correct HECs have been detected. For an AtmCell component located under a DS3 or E3 component with mapping = PLCP, the LCD defect is directly derived from the PLCP LOF defect. If LCD defects are intermittently occurring, the LCD defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle The component under which is located the AtmCell component goes into an operational state of disabled until the LCD alarm condition is cleared. The condition is cleared after the LCD defect has not been reported for a period of 10 seconds +/- 0.5 seconds. The lcdAlarm attribute is always set to off when the parent of the AtmCell component has been locked and left offline. This can also happen when the Path or Channel component has been suspended since its parent has been locked.
INT mscLpSonetPathCellScrambleCellPayload	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.2	INTEGER	read-write	Cell scrambling, as defined by ITU-T Recommendation I.432., can provide a solution to the problem of transmission equipment which is sensitive to certain bit patterns in the ATM cell payload. This attribute controls whether or not the cell payload is scrambled. It defaults to off for DS1 interfaces, and on for all other interfaces. Note that this setting must be the same at both ends of the link.
INT mscLpSonetPathIfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpSonetPathLopAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.1	INTEGER	read-only	This attribute displays whether a Loss Of Pointer (LOP) alarm state has been entered. An LOP alarm state is entered when LOP defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. An LOP defect occurs when no valid SPE or VC pointer was received in 8 contiguous frames. If the LOP defects are intermittently occurring, the LOP defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the LOP alarm condition is cleared. The condition is cleared when no more invalid pointer has been reported for 10 seconds +/- 0.5 seconds. The lopAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetPathRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.2	INTEGER	read-only	This attribute displays whether an Path Alarm Indication Signal (P- AIS) alarm state has been entered. An P-AIS alarm state is entered when P-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-AIS defect is the occurrence of the P-AIS signal in three contiguous valid STS or STM frames (all one's in bytes H1 and H2). If the P-AIS defects are intermittently occurring, the P-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-AIS alarm condition is cleared. The condition is cleared after no P-AIS defect has been detected for 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.3	INTEGER	read-only	This attribute displays whether the Path Remote Failure Indication (P-RFI) alarm state has been entered. An P-RFI alarm state is entered when Path Remote Defect Indicator (P-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The P-RDI defect is the occurrence of the P-RDI signal in five contiguous valid STS or STM frames (bit 5 of the G1 byte set to 1). If the P-RDI defects are intermittently occurring, the P-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10)with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the P-RFI alarm condition is cleared. The condition is cleared after no P-RDI defect has been detected for 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathSignalLabelMismatch	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.4	INTEGER	read-only	This attribute displays whether the Path Signal Label Mismatch (P- SLM) failure condition has been entered. An P-SLM failure condition is entered when P-SLM defects have been observed and accumulated for period of 2.5 seconds +/- 0.5 seconds. An P-SLM defect occurs when detecting an unexpected path signal label. The expected Path signal labels are 'Mapping for ATM' or 'Equipped - Non Specific Payload'. If the P-SLM defects are intermittently occurring, the P-SLM defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Path component goes into an operational state of disabled until the Path Signal Label Mismatch failure condition is cleared. The condition is cleared when an expected path signal label is received for 10 seconds +/- 0.5 seconds. The signalLabelMismatch attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSonetPathStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSonetPathTxAis	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.5	INTEGER	read-only	This attribute displays whether the Path Alarm Indication Signal (P- AIS) signal is being transmitted on the path. The P-AIS signal is transmitted when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1.6	INTEGER	read-only	This attribute displays whether the Path Remote Defect Indicator (P-RDI) signal is being transmitted over the path signal. The P-RDI signal is transmitted over the outgoing line upon detection of LOP, P-AIS or the occurrence of the LCD state. This attribute is always set to off when the Path component has been locked and left offline by the operator or when the Path component has been suspended since the parent component has been locked.
INT mscLpSonetPathUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSonetPathUsageState	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSonetRxAisAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.3	INTEGER	read-only	This attribute displays whether a Line Alarm Indication Signal (L- AIS) alarm state has been entered. An L-AIS alarm state is entered when L-AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-AIS defect is the occurrence of the L-AIS signal in five contiguous STS (STM) frames (111 pattern in bits 6,7, and 8 of the K2 bytes). If the L-AIS defects are intermittently occurring, the L-AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-AIS alarm condition is cleared. The condition is cleared after not detecting the L-AIS signal for a period of 10 seconds +/- 0.5 seconds. The rxAisAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetRxRfiAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.4	INTEGER	read-only	This attribute displays whether a Line Remote Failure Indication (LRFI) alarm state has been entered. An L-RFI alarm state is entered when Line Remote Failure Indication (L-RDI) defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. The L-RDI defect is the occurrence of the L-RDI signal in five contiguous valid STS (STM) frame (110 pattern in bits 6,7, and 8 of the K2 bytes). If the L-RDI defects are intermittently occurring, the L-RDI defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The Sonet/Sdh component goes into an operational state of disabled until the L-RFI alarm condition is cleared. The condition is cleared after not detecting the L-RDI signal for a period of 10 seconds +/- 0.5 seconds. The rxRfiAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetSnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.14.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpSonetStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpSonetTestAdminState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpSonetTestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpSonetTestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpSonetTestOperationalState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpSonetTestType	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpSonetTestUsageState	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpSonetTxAis	1.3.6.1.4.1.562.36.2.1.12.14.16.1.5	INTEGER	read-only	This attribute displays whether the Line Alarm Indication Signal (L- AIS) signal is being transmitted on the outgoing line. This signal is transmitted when the Sonet/Sdh is locked and left offline.
INT mscLpSonetTxRdi	1.3.6.1.4.1.562.36.2.1.12.14.16.1.6	INTEGER	read-only	This attribute displays whether the Line Remote Defect Indicator (L-RDI) signal is being transmitted over the OC-3 line. The L-RDI signal is transmitted upon the detection of the LOS, LOF or L-AIS defect. This attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpSonetUnusableTxClockRefAlarm	1.3.6.1.4.1.562.36.2.1.12.14.16.1.7	INTEGER	read-only	This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.
INT mscLpSonetUsageState	1.3.6.1.4.1.562.36.2.1.12.14.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpSpareCardStatus	1.3.6.1.4.1.562.36.2.1.12.103.1.3	INTEGER	read-only	This attribute specifies the status of this LP's spare card. The following values have been defined: notProvisioned No spare card has been provisioned. notAvailable The spare card is not available. alreadyInUse The spare card is already in use by another LP. available The spare card is available (running as standby). active The spare card is running as active.
INT mscLpStandbyStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpUnknownStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpUsageState	1.3.6.1.4.1.562.36.2.1.12.102.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpV35ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.9.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
INT mscLpV35AdminState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpV35ClockingSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT mscLpV35DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.9.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. A DTE interface uses TSET(DCE) and RSET(DCE) for timing. If the value of the attribute is fromDce, the DCE uses the internally generated transmit clock to supply both TSET(DCE) and RSET(DCE). If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock to supply TSET(DCE), but the receive timing is derived from TSET(DTE) on the link. The fromDte mode is recommended when the DTE is far away from the DCE interface. Note that TSET(DTE) is CCITT V.24 circuit 113; TSET(DCE) is CCITT V.24 circuit 114; and RSET(DCE) is CCITT V.24 circuit 115.
INT mscLpV35EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.9	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte.
INT mscLpV35IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.9.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpV35LinkMode	1.3.6.1.4.1.562.36.2.1.12.9.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the V.35 interface. The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the RTS line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the RTS line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signals (RFS, DSR, and DCD) are compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified input line states are observed. In dce mode, the V35 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signals (RFS, DSR, and DCD) and monitoring the DTE line signal (RTS) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpV35OperationalState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpV35SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.9.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpV35StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpV35TestAdminState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpV35TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpV35TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpV35TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpV35TestType	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpV35TestUsageState	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpV35UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpV35UsageState	1.3.6.1.4.1.562.36.2.1.12.9.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpX21ActualLinkMode	1.3.6.1.4.1.562.36.2.1.12.10.16.1.1	INTEGER	read-only	This attribute contains the actual link mode defined by the hardware. Note that the hardware overrides the provisionable data. The interface behaves as a DCE or DTE according to the actualLinkMode.
INT mscLpX21AdminState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpX21ClockingSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.6	INTEGER	read-write	This attribute defines the source of synchronization of the outgoing clocks. This attribute is only used when the actualLinkMode is dce. If the value of the attribute is local, the outgoing clocks are synchronized to a local oscillator on the FP. If the value of the attribute is module, the outgoing clocks are synchronized to the oscillator on the active CP.
INT mscLpX21DteDataClockSource	1.3.6.1.4.1.562.36.2.1.12.10.10.1.7	INTEGER	read-write	This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard). If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored. If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock. The fromDte mode is recommended when the DTE is far away from the DCE interface.
INT mscLpX21EnableDynamicSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.10	INTEGER	read-write	When set to yes, this attribute specifies that the transmit link speed should be set to the calculated receiver link speed. This attribute can be set to yes only if the linkMode is dce and the dteDataClockSource is fromDte..
INT mscLpX21IfAdminStatus	1.3.6.1.4.1.562.36.2.1.12.10.13.1.1	INTEGER	read-write	The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.
INT mscLpX21LineTerminationRequired	1.3.6.1.4.1.562.36.2.1.12.10.10.1.8	INTEGER	read-write	This attribute specifies whether termination is required for this interface. If the hardware setup does not match this attribute, an alarm will be generated.
INT mscLpX21LinkMode	1.3.6.1.4.1.562.36.2.1.12.10.10.1.1	INTEGER	read-write	This attribute defines the intended gender of the X21 component (V.11 interface). The actual gender of the interface is determined by the physical connection to the patch panel. If the hardware setup does not match this attribute, an alarm will be generated. In dte mode, the control line signal is driven as specified by the attribute readyLineState when the interface passes its initial diagnostics. Then, the control line signal will be driven as specified in the attribute dataTransferLineState when the application is ready to transfer data. On the other hand, the input line signal (indication) is compared against those specified in the attributes readyLineState and dataTransferLineState. The application will be notified when the specified line states are observed. In dce mode, the X21 component behaves similarly as when it is in dte mode. However, it will be driving the DCE line signal (control) and monitoring the DTE line signal (indication) as specified by the attributes readyLineState and dataTransferLineState.
INT mscLpX21OperationalState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
INT mscLpX21SnmpOperStatus	1.3.6.1.4.1.562.36.2.1.12.10.14.1.1	INTEGER	read-only	The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed.
INT mscLpX21StandbyStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.8	INTEGER	read-only	If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource.
INT mscLpX21TestAdminState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscLpX21TestCauseOfTermination	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.3	INTEGER	read-only	This attribute indicates either the status of the test or the cause of the test's termination: neverStarted indicates that the test has not yet been started. testRunning indicates that the test has been started. stoppedByOperator indicates that the operator issued a stop command on a test that was running. testTimeExpired indicates that the test ran for the time specified by the test's duration. loopCodeSyncFailed indicates that the local end failed to synchronize to the loopCode pattern. The local end transmits the loopCode pattern to cause the remote end to apply a loopback, after which the local end should receive the loopCode pattern. The exact pattern used to request loopCode depends on the test type. This failure indicates a high rate of transmission errors, or that the remote end has failed to apply the loopback. patternSyncFailed indicates that the local end failed to synchronize to the frmPatternType test pattern, that should have been looped back at the remote end. This failure indicates a high rate of transmission errors or the absence of a loopback. patternSyncLost indicates that the local end gained and then lost synchronization to the returned frmPatternType test pattern. This failure indicates a sudden increase in transmission errors, frame slippage, or the removal of an existing loopback. unknown is set when a reason to terminate other than those listed here is encountered. Note: Only MSA cards support recognition of the failures loopCodeSyncFailed, patternSyncFailed and patternSyncLost. Other cards will not terminate the test under the conditions described by these values.
INT mscLpX21TestFrmPatternType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.4	INTEGER	read-write	This attribute defines the type of data pattern generation to use. The following lists the available pattern types: ccitt32kBitPattern is a pseudo-random sequence of 32 kbit. ccitt8MBitPattern is a pseudo-random sequence of 8Mbit. customizedPattern is the pattern defined in the customizedPattern attribute.
INT mscLpX21TestOperationalState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscLpX21TestType	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.2	INTEGER	read-write	This attribute is the type of test to be run. The available test types include the following: card test sets up an internal loop on the board and runs a bit error rate test. manual test assumes the line is looped back externally and a bit error rate test is performed. localLoop test loops back the local modem and performs a bit error rate test. remoteLoop test loops back the remote modem (or CSU) and performs a bit error rate test. externalLoop test loops back the line to the far end. payloadLoop test only loops back the payload data received from the incoming line. remoteLoopThisTrib loops this particular tributary back at the far end, using services provided by the parent. v54RemoteLoop initiates a V.54 Remote Loopback test. pn127RemoteLoop initiates a PN127 Remote Loopback test. Note that not all test types are not supported by all function processors.
INT mscLpX21TestUsageState	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
INT mscLpX21UnknownStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.9	INTEGER	read-only	This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure.
INT mscLpX21UsageState	1.3.6.1.4.1.562.36.2.1.12.10.15.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component.
Integer32 (17)
I32 mscLpDS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1Chan tables.
I32 mscLpDS1Index	1.3.6.1.4.1.562.36.2.1.12.7.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS1 tables.
I32 mscLpDS3DS1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1Chan tables.
I32 mscLpDS3DS1Index	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3DS1 tables.
I32 mscLpDS3Index	1.3.6.1.4.1.562.36.2.1.12.5.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpDS3 tables.
I32 mscLpE1ChanIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1Chan tables.
I32 mscLpE1Index	1.3.6.1.4.1.562.36.2.1.12.8.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE1 tables.
I32 mscLpE3Index	1.3.6.1.4.1.562.36.2.1.12.6.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpE3 tables.
I32 mscLpHssiIndex	1.3.6.1.4.1.562.36.2.1.12.17.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpHssi tables.
I32 mscLpIndex	1.3.6.1.4.1.562.36.2.1.12.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLp tables.
I32 mscLpJT2Index	1.3.6.1.4.1.562.36.2.1.12.16.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpJT2 tables.
I32 mscLpSdhIndex	1.3.6.1.4.1.562.36.2.1.12.15.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdh tables.
I32 mscLpSdhPathIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSdhPath tables.
I32 mscLpSonetIndex	1.3.6.1.4.1.562.36.2.1.12.14.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonet tables.
I32 mscLpSonetPathIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpSonetPath tables.
I32 mscLpV35Index	1.3.6.1.4.1.562.36.2.1.12.9.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpV35 tables.
I32 mscLpX21Index	1.3.6.1.4.1.562.36.2.1.12.10.1.1.10	Integer32	not-accessible	This variable represents the index for the mscLpX21 tables.
InterfaceIndex (16)
NUM mscLpDS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpDS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.7.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpDS3DS1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpDS3DS1IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpDS3IfIndex	1.3.6.1.4.1.562.36.2.1.12.5.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpE1ChanIfIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpE1IfIndex	1.3.6.1.4.1.562.36.2.1.12.8.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpE3IfIndex	1.3.6.1.4.1.562.36.2.1.12.6.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpHssiIfIndex	1.3.6.1.4.1.562.36.2.1.12.17.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpJT2IfIndex	1.3.6.1.4.1.562.36.2.1.12.16.12.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpSdhIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpSdhPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpSonetIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpSonetPathIfIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpV35IfIndex	1.3.6.1.4.1.562.36.2.1.12.9.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
NUM mscLpX21IfIndex	1.3.6.1.4.1.562.36.2.1.12.10.13.1.2	InterfaceIndex	read-only	This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
Link (15)
LIN mscLpDS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN mscLpDS3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.10.1.4	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the DS3 component.
LIN mscLpDS3DS1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN mscLpE1ChanApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of this hardware component.
LIN mscLpE3ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.6.10.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the E3 component.
LIN mscLpHssiApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.17.10.1.7	Link	read-write	This attribute contains the component name of a Framer which is associated with the Hssi component.
LIN mscLpJT2ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.16.11.1.3	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the JT2 component.
LIN mscLpLinkToApplicationsValue	1.3.6.1.4.1.562.36.2.1.12.242.1.1	Link	read-only	This variable represents both the value and the index for the mscLpLinkToApplicationsTable.
LIN mscLpLogicalProcessorType	1.3.6.1.4.1.562.36.2.1.12.100.1.3	Link	read-write	This is the Logical Processor Type (LPT) that determines which software this LP will run.
LIN mscLpMainCard	1.3.6.1.4.1.562.36.2.1.12.100.1.1	Link	read-write	This is the preferred processor card on which this LP should be assigned.
LIN mscLpSdhPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
LIN mscLpSonetPathApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1.1	Link	read-write	This attribute defines the link to the software stack. It defines which application is running on top of the Path component.
LIN mscLpSpareCard	1.3.6.1.4.1.562.36.2.1.12.100.1.2	Link	read-write	This is the spare processor card on which this LP should be assigned.
LIN mscLpV35ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.9.10.1.8	Link	read-write	This attribute contains the component name of a Framer which is associated with the V35 component.
LIN mscLpX21ApplicationFramerName	1.3.6.1.4.1.562.36.2.1.12.10.10.1.9	Link	read-write	This attribute contains the component name of a Framer which is associated with the X21 component.
NonReplicated (36)
NON mscLpDS1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Audio tables.
NON mscLpDS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanCell tables.
NON mscLpDS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTc tables.
NON mscLpDS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1ChanTest tables.
NON mscLpDS1DspIndex	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Dsp tables.
NON mscLpDS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS1Test tables.
NON mscLpDS3CBitIndex	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3CBit tables.
NON mscLpDS3CellIndex	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Cell tables.
NON mscLpDS3DS1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanCell tables.
NON mscLpDS3DS1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTc tables.
NON mscLpDS3DS1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1ChanTest tables.
NON mscLpDS3DS1TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3DS1Test tables.
NON mscLpDS3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Plcp tables.
NON mscLpDS3TestIndex	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpDS3Test tables.
NON mscLpE1AudioIndex	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Audio tables.
NON mscLpE1ChanCellIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanCell tables.
NON mscLpE1ChanFlmIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanFlm tables.
NON mscLpE1ChanTcIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTc tables.
NON mscLpE1ChanTestIndex	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1ChanTest tables.
NON mscLpE1DspIndex	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Dsp tables.
NON mscLpE1TestIndex	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE1Test tables.
NON mscLpE3CellIndex	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Cell tables.
NON mscLpE3G832Index	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3G832 tables.
NON mscLpE3PlcpIndex	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Plcp tables.
NON mscLpE3TestIndex	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpE3Test tables.
NON mscLpEngDsOvIndex	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEngDsOv tables.
NON mscLpEngIndex	1.3.6.1.4.1.562.36.2.1.12.23.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpEng tables.
NON mscLpHssiTestIndex	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpHssiTest tables.
NON mscLpJT2CellIndex	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Cell tables.
NON mscLpJT2TestIndex	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpJT2Test tables.
NON mscLpSdhPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhPathCell tables.
NON mscLpSdhTestIndex	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSdhTest tables.
NON mscLpSonetPathCellIndex	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetPathCell tables.
NON mscLpSonetTestIndex	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpSonetTest tables.
NON mscLpV35TestIndex	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpV35Test tables.
NON mscLpX21TestIndex	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscLpX21Test tables.
OCTET STRING (82)
OCT mscLpAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpControlStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT mscLpDS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.7.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3CBitLoopbackAtFarEndRequested	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.3	OCTET STRING	read-only	This attribute indicates which DS1 tributaries are being looped back, or if the DS3 line is being looped back. Each value listed indicates a loopback request has been made. When a loopback deactivation command has been sent to the far end, the corresponding value will be removed from the list. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT mscLpDS3CBitLoopedbackToFarEnd	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1.2	OCTET STRING	read-only	This indicates whether or not the DS3 component is currently looping back the incoming DS3 signal or one of its DS1 tributaries to the far-end DS3 terminal. This is activated when the far-end DS3 equipment has ordered the local terminal to do so. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) notused29(29) notused30(30) ds3Line(31)
OCT mscLpDS3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3DS1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS3DS1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3DS1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpDS3DS1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpDS3DS1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3DS1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3DS1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT mscLpDS3DS1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpDS3DS1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpDS3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.5.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE1AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpE1AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE1ChanAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpE1ChanAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE1ChanControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE1ChanProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE1ChanTimeslots	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1.1	OCTET STRING	read-write	This attribute contains the list of timeslots that are used by the Channel component. Valid numbers are 1-24 for a Channel used by a DS1 component, and 1-31 for a Channel used by an E1 component. Description of bits: notused0(0) n1(1) n2(2) n3(3) n4(4) n5(5) n6(6) n7(7) n8(8) n9(9) n10(10) n11(11) n12(12) n13(13) n14(14) n15(15) n16(16) n17(17) n18(18) n19(19) n20(20) n21(21) n22(22) n23(23) n24(24) n25(25) n26(26) n27(27) n28(28) n29(29) n30(30) n31(31)
OCT mscLpE1ControlStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE1ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.8.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpE3AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpE3AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpE3ControlStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpE3ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.6.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpHssiAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpHssiAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpHssiControlStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpHssiDataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: ca(0) ta(1)
OCT mscLpHssiLineState	1.3.6.1.4.1.562.36.2.1.12.17.16.1.2	OCTET STRING	read-only	This attribute contains the state of the interface signals. Description of bits: ca(0) ta(1) tm(2) la(3) lb(4)
OCT mscLpHssiProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.17.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpHssiReadyLineState	1.3.6.1.4.1.562.36.2.1.12.17.10.1.2	OCTET STRING	read-write	This attribute specifies the line signal originating from the HSSI interface that will always be turned on, provided the HSSI interface passes it diagnostics. This set of signal is generally required for maintaining the connection. Note that both dte and dce signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the operational attribute actualLinkMode. See also linkMode. Description of bits: ca(0) ta(1)
OCT mscLpJT2AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpJT2AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpJT2ControlStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpJT2ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.16.14.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.102.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSdhAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSdhAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSdhControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSdhPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSdhPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSdhPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSdhPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSdhProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.15.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSonetAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSonetAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSonetControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSonetPathAlarmStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpSonetPathAvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpSonetPathControlStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpSonetPathProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpSonetProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.14.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpV35AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpV35AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpV35ControlStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpV35DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.3	OCTET STRING	read-write	This attribute specifies the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT mscLpV35LineState	1.3.6.1.4.1.562.36.2.1.12.9.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT mscLpV35ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.9.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpV35ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.9.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.35 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required for maintaining the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: rfs(0) dsr(1) dcd(2) rts(3)
OCT mscLpX21AlarmStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.7	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
OCT mscLpX21AvailabilityStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.4	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
OCT mscLpX21ControlStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.6	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
OCT mscLpX21DataTransferLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.3	OCTET STRING	read-write	The state of the line signals required to indicate that the external equipment is in a good state (that is, data transfer can proceed). Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. The value of this attribute must be a superset of that of the readyLineState attribute. See also linkMode. Description of bits: indication(0) control(1)
OCT mscLpX21LineState	1.3.6.1.4.1.562.36.2.1.12.10.16.1.2	OCTET STRING	read-only	This attribute contains the current state of the interface signals. Description of bits: indication(0) control(1)
OCT mscLpX21ProceduralStatus	1.3.6.1.4.1.562.36.2.1.12.10.15.1.5	OCTET STRING	read-only	If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
OCT mscLpX21ReadyLineState	1.3.6.1.4.1.562.36.2.1.12.10.10.1.2	OCTET STRING	read-write	This attribute specifies the line signals originating from the V.11 interface that will always be turned on, provided the interface passes its diagnostics. This set of signals is generally required to maintain the connection. Note that both DTE and DCE signals are specified in this attribute. The appropriate set of specified signals will be turned on or checked according to the actualLinkMode. See also linkMode. Description of bits: indication(0) control(1)
PassportCounter64 (98)
NUM mscLpDS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3DS1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3DS1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3DS1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3DS1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpDS3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpDS3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpDS3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpDS3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1ChanTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1ChanTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1ChanTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1ChanTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1ChanTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE1TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE1TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE1TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE1TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE3TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpE3TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpE3TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpE3TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpE3TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpHssiTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpHssiTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpHssiTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpHssiTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpHssiTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpJT2TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpJT2TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpJT2TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpJT2TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpJT2TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSdhTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSdhTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSdhTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSdhTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSdhTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSonetTestBitsRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpSonetTestBitsTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpSonetTestBytesRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestBytesTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpSonetTestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestFrmRx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpSonetTestFrmTx	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpV35TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpV35TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpV35TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpV35TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpV35TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpX21TestBitsRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.7	PassportCounter64	read-only	This attribute is the total number of bits received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach the maximum value.
NUM mscLpX21TestBitsTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.4	PassportCounter64	read-only	This attribute is the total number of bits sent during the test period. As long as the line speed of the hardware interface is less than 70 Mbit/s, this counter is not expected to reach the maximum value.
NUM mscLpX21TestBytesRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.8	PassportCounter64	read-only	This attribute is the total number of bytes received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestBytesTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.5	PassportCounter64	read-only	This attribute is the total number of bytes sent during the test period. This counter is not expected to reach its maximum value.
NUM mscLpX21TestErroredFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.10	PassportCounter64	read-only	This attribute is not displayed for ATM cards because the physical layer drops all errored frames at the controller interface. For all other card types, this attribute is the total number of errored frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestFrmRx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.9	PassportCounter64	read-only	This attribute is the total number of frames received during the test period. This counter is not expected to reach its maximum value. The counter will wrap around to 0 if it does reach its maximum value.
NUM mscLpX21TestFrmTx	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.6	PassportCounter64	read-only	This attribute is the total number of frames sent during the test period. This counter is not expected to reach its maximum value.
RowPointer (1)
NUM mscLpActiveCard	1.3.6.1.4.1.562.36.2.1.12.103.1.1	RowPointer	read-only	This attribute indicates on which card this LP is currently running (if any).
RowStatus (54)
ROW mscLpDS1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Audio components. These components cannot be added nor deleted.
ROW mscLpDS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanCell components. These components can be added and deleted.
ROW mscLpDS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1Chan components. These components can be added and deleted.
ROW mscLpDS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1ChanTc components. These components can be added and deleted.
ROW mscLpDS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1ChanTest components. These components cannot be added nor deleted.
ROW mscLpDS1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Dsp components. These components cannot be added nor deleted.
ROW mscLpDS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.7.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS1 components. These components can be added and deleted.
ROW mscLpDS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS1Test components. These components cannot be added nor deleted.
ROW mscLpDS3CBitRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3CBit components. These components cannot be added nor deleted.
ROW mscLpDS3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3Cell components. These components can be added and deleted.
ROW mscLpDS3DS1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanCell components. These components can be added and deleted.
ROW mscLpDS3DS1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1Chan components. These components can be added and deleted.
ROW mscLpDS3DS1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTc components. These components can be added and deleted.
ROW mscLpDS3DS1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1ChanTest components. These components cannot be added nor deleted.
ROW mscLpDS3DS1RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3DS1 components. These components can be added and deleted.
ROW mscLpDS3DS1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3DS1Test components. These components cannot be added nor deleted.
ROW mscLpDS3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Plcp components. These components cannot be added nor deleted.
ROW mscLpDS3RowStatus	1.3.6.1.4.1.562.36.2.1.12.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpDS3 components. These components can be added and deleted.
ROW mscLpDS3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpDS3Test components. These components cannot be added nor deleted.
ROW mscLpE1AudioRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Audio components. These components cannot be added nor deleted.
ROW mscLpE1ChanCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanCell components. These components can be added and deleted.
ROW mscLpE1ChanFlmRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanFlm components. These components can be added and deleted.
ROW mscLpE1ChanRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1Chan components. These components can be added and deleted.
ROW mscLpE1ChanTcRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1ChanTc components. These components can be added and deleted.
ROW mscLpE1ChanTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1ChanTest components. These components cannot be added nor deleted.
ROW mscLpE1DspRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Dsp components. These components cannot be added nor deleted.
ROW mscLpE1RowStatus	1.3.6.1.4.1.562.36.2.1.12.8.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE1 components. These components can be added and deleted.
ROW mscLpE1TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE1Test components. These components cannot be added nor deleted.
ROW mscLpE3CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3Cell components. These components can be added and deleted.
ROW mscLpE3G832RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3G832 components. These components can be added and deleted.
ROW mscLpE3PlcpRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Plcp components. These components cannot be added nor deleted.
ROW mscLpE3RowStatus	1.3.6.1.4.1.562.36.2.1.12.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpE3 components. These components can be added and deleted.
ROW mscLpE3TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpE3Test components. These components cannot be added nor deleted.
ROW mscLpEngDsOvRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDsOv components. These components can be added and deleted.
ROW mscLpEngDsRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpEngDs components. These components can be added and deleted.
ROW mscLpEngRowStatus	1.3.6.1.4.1.562.36.2.1.12.23.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpEng components. These components cannot be added nor deleted.
ROW mscLpHssiRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpHssi components. These components can be added and deleted.
ROW mscLpHssiTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpHssiTest components. These components cannot be added nor deleted.
ROW mscLpJT2CellRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Cell components. These components cannot be added nor deleted.
ROW mscLpJT2RowStatus	1.3.6.1.4.1.562.36.2.1.12.16.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpJT2 components. These components can be added and deleted.
ROW mscLpJT2TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpJT2Test components. These components cannot be added nor deleted.
ROW mscLpRowStatus	1.3.6.1.4.1.562.36.2.1.12.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLp components. These components can be added and deleted.
ROW mscLpSdhPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhPathCell components. These components cannot be added nor deleted.
ROW mscLpSdhPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdhPath components. These components can be added and deleted.
ROW mscLpSdhRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSdh components. These components can be added and deleted.
ROW mscLpSdhTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSdhTest components. These components cannot be added nor deleted.
ROW mscLpSonetPathCellRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetPathCell components. These components cannot be added nor deleted.
ROW mscLpSonetPathRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonetPath components. These components can be added and deleted.
ROW mscLpSonetRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpSonet components. These components can be added and deleted.
ROW mscLpSonetTestRowStatus	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpSonetTest components. These components cannot be added nor deleted.
ROW mscLpV35RowStatus	1.3.6.1.4.1.562.36.2.1.12.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpV35 components. These components can be added and deleted.
ROW mscLpV35TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpV35Test components. These components cannot be added nor deleted.
ROW mscLpX21RowStatus	1.3.6.1.4.1.562.36.2.1.12.10.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscLpX21 components. These components can be added and deleted.
ROW mscLpX21TestRowStatus	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscLpX21Test components. These components cannot be added nor deleted.
StorageType (54)
STO mscLpDS1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Audio tables.
STO mscLpDS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanCell tables.
STO mscLpDS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Chan tables.
STO mscLpDS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTc tables.
STO mscLpDS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1ChanTest tables.
STO mscLpDS1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Dsp tables.
STO mscLpDS1StorageType	1.3.6.1.4.1.562.36.2.1.12.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1 tables.
STO mscLpDS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS1Test tables.
STO mscLpDS3CBitStorageType	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3CBit tables.
STO mscLpDS3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Cell tables.
STO mscLpDS3DS1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanCell tables.
STO mscLpDS3DS1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Chan tables.
STO mscLpDS3DS1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTc tables.
STO mscLpDS3DS1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1ChanTest tables.
STO mscLpDS3DS1StorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1 tables.
STO mscLpDS3DS1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3DS1Test tables.
STO mscLpDS3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Plcp tables.
STO mscLpDS3StorageType	1.3.6.1.4.1.562.36.2.1.12.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3 tables.
STO mscLpDS3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpDS3Test tables.
STO mscLpE1AudioStorageType	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Audio tables.
STO mscLpE1ChanCellStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanCell tables.
STO mscLpE1ChanFlmStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanFlm tables.
STO mscLpE1ChanStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Chan tables.
STO mscLpE1ChanTcStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTc tables.
STO mscLpE1ChanTestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1ChanTest tables.
STO mscLpE1DspStorageType	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Dsp tables.
STO mscLpE1StorageType	1.3.6.1.4.1.562.36.2.1.12.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1 tables.
STO mscLpE1TestStorageType	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE1Test tables.
STO mscLpE3CellStorageType	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Cell tables.
STO mscLpE3G832StorageType	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3G832 tables.
STO mscLpE3PlcpStorageType	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Plcp tables.
STO mscLpE3StorageType	1.3.6.1.4.1.562.36.2.1.12.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3 tables.
STO mscLpE3TestStorageType	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpE3Test tables.
STO mscLpEngDsOvStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDsOv tables.
STO mscLpEngDsStorageType	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEngDs tables.
STO mscLpEngStorageType	1.3.6.1.4.1.562.36.2.1.12.23.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpEng tables.
STO mscLpHssiStorageType	1.3.6.1.4.1.562.36.2.1.12.17.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssi tables.
STO mscLpHssiTestStorageType	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpHssiTest tables.
STO mscLpJT2CellStorageType	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Cell tables.
STO mscLpJT2StorageType	1.3.6.1.4.1.562.36.2.1.12.16.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2 tables.
STO mscLpJT2TestStorageType	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpJT2Test tables.
STO mscLpSdhPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPathCell tables.
STO mscLpSdhPathStorageType	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhPath tables.
STO mscLpSdhStorageType	1.3.6.1.4.1.562.36.2.1.12.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdh tables.
STO mscLpSdhTestStorageType	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSdhTest tables.
STO mscLpSonetPathCellStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPathCell tables.
STO mscLpSonetPathStorageType	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetPath tables.
STO mscLpSonetStorageType	1.3.6.1.4.1.562.36.2.1.12.14.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonet tables.
STO mscLpSonetTestStorageType	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpSonetTest tables.
STO mscLpStorageType	1.3.6.1.4.1.562.36.2.1.12.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLp tables.
STO mscLpV35StorageType	1.3.6.1.4.1.562.36.2.1.12.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35 tables.
STO mscLpV35TestStorageType	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpV35Test tables.
STO mscLpX21StorageType	1.3.6.1.4.1.562.36.2.1.12.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21 tables.
STO mscLpX21TestStorageType	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscLpX21Test tables.
Unsigned32 (123)
U32 mscLpCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.101.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpDS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 mscLpDS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigOneTable.
U32 mscLpDS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS1ChanTcSigTwoTable.
U32 mscLpDS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpDS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpDS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpDS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.7.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS1LineLength	1.3.6.1.4.1.562.36.2.1.12.7.10.1.5	Unsigned32	read-write	This attribute defines the line length (in feet) for equalization calculations for the DS1 line. The value ranges between 0-655. For 8pDS1Atm cards the actual value used for equalization is rounded up to the nearest 110 feet; for all other card types the actual value used is rounded to the nearest 50 feet.
U32 mscLpDS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpDS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpDS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpDS3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpDS3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS3DS1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpDS3DS1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS3DS1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 mscLpDS3DS1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigOneTable.
U32 mscLpDS3DS1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpDS3DS1ChanTcSigTwoTable.
U32 mscLpDS3DS1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpDS3DS1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpDS3DS1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpDS3DS1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpDS3DS1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3DS1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3DS1TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpDS3DS1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpDS3DS1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpDS3LineLength	1.3.6.1.4.1.562.36.2.1.12.5.10.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the DS3 line. The range is between 0 and 450 feet (1 metre = 3.28 feet). Note: There are currently only two ranges as far as the equalization calculation performed on the FP is concerned: 0 to 224ft and 225 to 450ft.
U32 mscLpDS3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpDS3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpDS3TestDuration	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpDS3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpDS3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpE1ChanCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpE1ChanCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpE1ChanTcSignalOneDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1.2	Unsigned32	read-write	This attribute specifies the time duration in seconds for which signalOne is substituted into the appropriate signaling bits, when a lineType that uses CAS has been defined. When signalOneDuration has expired signalTwo is substituted into the appropriate signaling bits. If signalOneDuration is set to zero then only signalTwo is substituted into the appropriate signaling bits during error conditions. signalOneDuration can be set to any integer value from 0 to 60 seconds.
U32 mscLpE1ChanTcSigOneValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigOneTable.
U32 mscLpE1ChanTcSigTwoValue	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1.2	Unsigned32	read-write	This variable represents an individual value for the mscLpE1ChanTcSigTwoTable.
U32 mscLpE1ChanTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1ChanTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1ChanTestDuration	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpE1ChanTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpE1ChanTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpE1CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.8.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpE1RaiClearAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.6	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) has been absent before clearing an RAI alarm. The value of auto sets the RAI clear time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiDeclareAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 mscLpE1RaiDeclareAlarmTime	1.3.6.1.4.1.562.36.2.1.12.8.10.1.5	Unsigned32	read-write	This attribute specifies the period of time that a Remote Alarm Indicator (RAI) must be present before declaring an RAI alarm. The value of auto sets the RAI declare time to the default value for E1 and E1C card types which do not have hardware support for RAI response. On E1C card types with hardware support, if the value of auto is set, RAI response is done according to the standards. If auto is set, the value of the raiClearAlarmTime attribute is ignored and auto is used. This attribute is for E1 and E1C card types only. For all other card types, the default value must be used. VALUES ( 0 = auto )
U32 mscLpE1TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE1TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE1TestDuration	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpE1TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpE1TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpE3CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpE3CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.6.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpE3LineLength	1.3.6.1.4.1.562.36.2.1.12.6.10.1.1	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the E3 line. The line length range is between 0 and 300 metres (1 metres = 3.28 feet).
U32 mscLpE3LinkAlarmActivationThreshold	1.3.6.1.4.1.562.36.2.1.12.6.10.1.6	Unsigned32	read-write	This attribute specifies the time interval between the detection of a sustained link failure and the activation of an alarm. It is provisionable for E3 cards.
U32 mscLpE3LinkAlarmScanInterval	1.3.6.1.4.1.562.36.2.1.12.6.10.1.7	Unsigned32	read-write	This attribute specifies the alarm scan timer polling interval. It determines how frequently the status of the link is monitored after a first link error interrupt. It is provisionable for E3 cards.
U32 mscLpE3TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpE3TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpE3TestDuration	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpE3TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpE3TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpEngDsAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1.1	Unsigned32	read-only	This attribute indicates the maximum size of the DCS Agent queue size maximum for a DCS data stream on the LP. It is the maximum size to which the Agent's currentQueueSize can grow. When the queue is full and more data is offered to the Agent, it will be discarded. The following are the system defaults (in number of records): - alarm: 100 - accounting: 10000 - debug: 0 - log: 50 - scn: 200 - trap: 50 - stats: 0 To override the system defaults, see Lp Eng Ds Ov's agentQueueSize attribute.
U32 mscLpEngDsOvAgentQueueSize	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DCS Agent's queue for this data stream on this LP. For more details on the defaults and other information, refer to the parent component's agentQueueSize attribute. The size should be set to 0 if absolutely no data is to be accepted from applications. There are threshold alarms based on the value of the Agent's currentQueueSize attribute (a Set when the queue becomes 75% full and a Clear after dropping back to 50% full). To properly determine what to set this to, consult the 'Magellan Passport Engineering Notes and Guidelines'.
U32 mscLpHssiCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.17.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpHssiLineSpeed	1.3.6.1.4.1.562.36.2.1.12.17.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. Note that the actual clock rate are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed.
U32 mscLpHssiTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpHssiTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpHssiTestDuration	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpHssiTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpHssiTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpJT2CellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpJT2CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.16.10.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpJT2LineLength	1.3.6.1.4.1.562.36.2.1.12.16.11.1.2	Unsigned32	read-write	This attribute defines the line length for equalization calculations for the JT2 line. The range is between 0 and 480 feet (1 metre = 3.28 feet).
U32 mscLpJT2TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpJT2TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpJT2TestDuration	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpJT2TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpJT2TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpLocalMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.2	Unsigned32	read-only	This attribute indicates the processor card's local message block memory capacity. These message blocks are used for local messaging on the card.
U32 mscLpMemoryCapacityValue	1.3.6.1.4.1.562.36.2.1.12.244.1.2	Unsigned32	read-only	This variable represents an individual value for the mscLpMemoryCapacityTable.
U32 mscLpMsgBlockCapacity	1.3.6.1.4.1.562.36.2.1.12.105.1.1	Unsigned32	read-only	This attribute indicates the processor card's shared message block memory capacity.
U32 mscLpSdhCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpSdhPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpSdhPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpSdhTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSdhTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSdhTestDuration	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpSdhTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpSdhTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpSonetCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpSonetPathCellAlarmActDelay	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1.1	Unsigned32	read-write	This attribute defines the time during which a Loss of Cell Delineation (LCD) defect should be observed before declaring an LCD alarm (alarm 70115501). The time is specified in milliseconds.
U32 mscLpSonetPathCustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpSonetTestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpSonetTestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpSonetTestDuration	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpSonetTestFrmSize	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpSonetTestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpTimeInterval	1.3.6.1.4.1.562.36.2.1.12.104.1.1	Unsigned32	read-only	This attribute indicates the time period (in minutes) for which the average, minimum and maximum utilization values are calculated. This attribute is reset to 0 every 15 minutes.
U32 mscLpV35CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.9.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpV35LineSpeed	1.3.6.1.4.1.562.36.2.1.12.9.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.35 DCE interface are: 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
U32 mscLpV35LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.9.10.1.4	Unsigned32	read-write	This attribute defines the time that the line state must be stable (good or bad) before a line state change is declared.
U32 mscLpV35TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpV35TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpV35TestDuration	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpV35TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpV35TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
U32 mscLpX21CustomerIdentifier	1.3.6.1.4.1.562.36.2.1.12.10.11.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
U32 mscLpX21LineSpeed	1.3.6.1.4.1.562.36.2.1.12.10.10.1.5	Unsigned32	read-write	This attribute defines the speed of the line for source clocking. This attribute is ignored if the interface is not providing a clock. The clock rate is rounded up to the nearest available value. Note that the actual clock rates are available in the operational attributes actualTxLineSpeed and actualRxLineSpeed. The actual lineSpeeds configurable on a V.11 DCE interface are: 7680000, 3840000, 2560000, 2048000, 1920000, 1536000, 1344000, 1280000, 1024000, 960000, 768000, 672000, 640000, 512000, 448000, 384000, 336000, 320000, 256000, 224000, 192000, 168000, 128000, 112000, 64000, 56000, 48000, 32000, 19200, 9600. Note that linspeeds of 1024000 and 2048000 cannot be provisioned on cards that have ports provisioned at 3840000, 2560000, 1920000, 1280000, 960000, 640000 or 320000.
U32 mscLpX21LineStatusTimeOut	1.3.6.1.4.1.562.36.2.1.12.10.10.1.4	Unsigned32	read-write	This attribute defines the time the line state must be stable (good or bad) before a state change is declared.
U32 mscLpX21TestDataStartDelay	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.6	Unsigned32	read-write	This attribute specifies the time delay (in seconds) between when the test expects the loop to have been set up, to when the test data actually starts to be transmitted. This attribute is to accommodate some non-standard equipment that requires extra time for setting up a requested loop. This attribute is ignored when the test type is set to externalLoop.
U32 mscLpX21TestDisplayInterval	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.7	Unsigned32	read-write	This attribute defines the interval (in minutes) between which interim test results are to be displayed. Results are displayed at the operator console at which the test was started. When the test type is set to externalLoop, this attribute is ignored. There will be no display of results if displayInterval is set to 0. This attribute can be changed anytime.
U32 mscLpX21TestDuration	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.8	Unsigned32	read-write	This attribute is the duration (in minutes) that test data will be transmitted. In the case of an externalLoop, this is the time that the loop is in effect. Note that dataStartDelay does not apply to the externalLoop.
U32 mscLpX21TestFrmSize	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1.3	Unsigned32	read-write	This attribute defines the size of the test data frames in number of bytes.
U32 mscLpX21TestTimeRemaining	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1.2	Unsigned32	read-only	This attribute is the number of minutes remaining before the test is to be stopped according to the duration attribute.
No type (619)
logicalProcessorCapabilities	1.3.6.1.4.1.562.36.2.2.11.3
logicalProcessorCapabilitiesCA	1.3.6.1.4.1.562.36.2.2.11.3.1
logicalProcessorCapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.11.3.1.3
logicalProcessorCapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.11.3.1.3.2
logicalProcessorGroup	1.3.6.1.4.1.562.36.2.2.11.1
logicalProcessorGroupCA	1.3.6.1.4.1.562.36.2.2.11.1.1
logicalProcessorGroupCA02	1.3.6.1.4.1.562.36.2.2.11.1.1.3
logicalProcessorGroupCA02A	1.3.6.1.4.1.562.36.2.2.11.1.1.3.2
logicalProcessorMIB	1.3.6.1.4.1.562.36.2.2.11
mscLp	1.3.6.1.4.1.562.36.2.1.12
mscLpCapEntry	1.3.6.1.4.1.562.36.2.1.12.105.1		not-accessible	An entry in the mscLpCapTable.
mscLpCapTable	1.3.6.1.4.1.562.36.2.1.12.105		not-accessible	This group contains the operational attributes that specify the processor's capacity levels. When this group exists for an LP component, the attributes are representative of the active Card.
mscLpCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.101.1		not-accessible	An entry in the mscLpCidDataTable.
mscLpCidDataTable	1.3.6.1.4.1.562.36.2.1.12.101		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS1	1.3.6.1.4.1.562.36.2.1.12.7
mscLpDS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.12.1		not-accessible	An entry in the mscLpDS1AdminInfoTable.
mscLpDS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS1Audio	1.3.6.1.4.1.562.36.2.1.12.7.5
mscLpDS1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Audio component.
mscLpDS1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Audio components.
mscLpDS1Chan	1.3.6.1.4.1.562.36.2.1.12.7.2
mscLpDS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.16.1		not-accessible	An entry in the mscLpDS1ChanAdminInfoTable.
mscLpDS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.7.2.3
mscLpDS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11.1		not-accessible	An entry in the mscLpDS1ChanCellOperTable.
mscLpDS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10.1		not-accessible	An entry in the mscLpDS1ChanCellProvTable.
mscLpDS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanCell component.
mscLpDS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanCell components.
mscLpDS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12.1		not-accessible	An entry in the mscLpDS1ChanCellStatsTable.
mscLpDS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.11.1		not-accessible	An entry in the mscLpDS1ChanCidDataTable.
mscLpDS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.12.1		not-accessible	An entry in the mscLpDS1ChanIfEntryTable.
mscLpDS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.15.1		not-accessible	An entry in the mscLpDS1ChanOperTable.
mscLpDS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.13.1		not-accessible	An entry in the mscLpDS1ChanOperStatusTable.
mscLpDS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.7.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpDS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.10.1		not-accessible	An entry in the mscLpDS1ChanProvTable.
mscLpDS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpDS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Chan component.
mscLpDS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Chan components.
mscLpDS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.14.1		not-accessible	An entry in the mscLpDS1ChanStateTable.
mscLpDS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.7.2.4
mscLpDS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11.1		not-accessible	An entry in the mscLpDS1ChanTcOpTable.
mscLpDS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10.1		not-accessible	An entry in the mscLpDS1ChanTcProvTable.
mscLpDS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpDS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTc component.
mscLpDS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTc components.
mscLpDS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398.1		not-accessible	An entry in the mscLpDS1ChanTcSigOneTable.
mscLpDS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399.1		not-accessible	An entry in the mscLpDS1ChanTcSigTwoTable.
mscLpDS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.7.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.7.2.2
mscLpDS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12.1		not-accessible	An entry in the mscLpDS1ChanTestResultsTable.
mscLpDS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS1ChanTest component.
mscLpDS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS1ChanTest components.
mscLpDS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11.1		not-accessible	An entry in the mscLpDS1ChanTestSetupTable.
mscLpDS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10.1		not-accessible	An entry in the mscLpDS1ChanTestStateTable.
mscLpDS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.7.11.1		not-accessible	An entry in the mscLpDS1CidDataTable.
mscLpDS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.7.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS1Dsp	1.3.6.1.4.1.562.36.2.1.12.7.4
mscLpDS1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Dsp component.
mscLpDS1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Dsp components.
mscLpDS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.7.13.1		not-accessible	An entry in the mscLpDS1IfEntryTable.
mscLpDS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.7.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.7.16.1		not-accessible	An entry in the mscLpDS1OperTable.
mscLpDS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.14.1		not-accessible	An entry in the mscLpDS1OperStatusTable.
mscLpDS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS1OperTable	1.3.6.1.4.1.562.36.2.1.12.7.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpDS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.7.10.1		not-accessible	An entry in the mscLpDS1ProvTable.
mscLpDS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.7.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
mscLpDS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.1.1		not-accessible	A single entry in the table represents a single mscLpDS1 component.
mscLpDS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.1		not-accessible	This entry controls the addition and deletion of mscLpDS1 components.
mscLpDS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.7.15.1		not-accessible	An entry in the mscLpDS1StateTable.
mscLpDS1StateTable	1.3.6.1.4.1.562.36.2.1.12.7.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.7.17.1		not-accessible	An entry in the mscLpDS1StatsTable.
mscLpDS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.7.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpDS1Test	1.3.6.1.4.1.562.36.2.1.12.7.3
mscLpDS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.12.1		not-accessible	An entry in the mscLpDS1TestResultsTable.
mscLpDS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.7.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS1Test component.
mscLpDS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.7.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS1Test components.
mscLpDS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.11.1		not-accessible	An entry in the mscLpDS1TestSetupTable.
mscLpDS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.7.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.7.3.10.1		not-accessible	An entry in the mscLpDS1TestStateTable.
mscLpDS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.7.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3	1.3.6.1.4.1.562.36.2.1.12.5
mscLpDS3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.12.1		not-accessible	An entry in the mscLpDS3AdminInfoTable.
mscLpDS3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3CBit	1.3.6.1.4.1.562.36.2.1.12.5.3
mscLpDS3CBitOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.10.1		not-accessible	An entry in the mscLpDS3CBitOperationalTable.
mscLpDS3CBitOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.3.10		not-accessible	This group contains the DS3 C-Bit Parity operational data for the CBIT component.
mscLpDS3CBitRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3CBit component.
mscLpDS3CBitRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3CBit components.
mscLpDS3CBitStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.3.11.1		not-accessible	An entry in the mscLpDS3CBitStatsTable.
mscLpDS3CBitStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.3.11		not-accessible	This group contains the DS3 C-Bit Parity statistical data for the CBIT component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3Cell	1.3.6.1.4.1.562.36.2.1.12.5.5
mscLpDS3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.11.1		not-accessible	An entry in the mscLpDS3CellOperTable.
mscLpDS3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.10.1		not-accessible	An entry in the mscLpDS3CellProvTable.
mscLpDS3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Cell component.
mscLpDS3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Cell components.
mscLpDS3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.5.12.1		not-accessible	An entry in the mscLpDS3CellStatsTable.
mscLpDS3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.11.1		not-accessible	An entry in the mscLpDS3CidDataTable.
mscLpDS3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3DS1	1.3.6.1.4.1.562.36.2.1.12.5.6
mscLpDS3DS1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.12.1		not-accessible	An entry in the mscLpDS3DS1AdminInfoTable.
mscLpDS3DS1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3DS1Chan	1.3.6.1.4.1.562.36.2.1.12.5.6.2
mscLpDS3DS1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16.1		not-accessible	An entry in the mscLpDS3DS1ChanAdminInfoTable.
mscLpDS3DS1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpDS3DS1ChanCell	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3
mscLpDS3DS1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCellOperTable.
mscLpDS3DS1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpDS3DS1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10.1		not-accessible	An entry in the mscLpDS3DS1ChanCellProvTable.
mscLpDS3DS1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpDS3DS1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanCell component.
mscLpDS3DS1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanCell components.
mscLpDS3DS1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12.1		not-accessible	An entry in the mscLpDS3DS1ChanCellStatsTable.
mscLpDS3DS1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3DS1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanCidDataTable.
mscLpDS3DS1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3DS1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanIfEntryTable.
mscLpDS3DS1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3DS1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15.1		not-accessible	An entry in the mscLpDS3DS1ChanOperTable.
mscLpDS3DS1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13.1		not-accessible	An entry in the mscLpDS3DS1ChanOperStatusTable.
mscLpDS3DS1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpDS3DS1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanProvTable.
mscLpDS3DS1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpDS3DS1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Chan component.
mscLpDS3DS1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Chan components.
mscLpDS3DS1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14.1		not-accessible	An entry in the mscLpDS3DS1ChanStateTable.
mscLpDS3DS1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1ChanTc	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4
mscLpDS3DS1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTcOpTable.
mscLpDS3DS1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpDS3DS1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTcProvTable.
mscLpDS3DS1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpDS3DS1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTc component.
mscLpDS3DS1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTc components.
mscLpDS3DS1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigOneTable.
mscLpDS3DS1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS3DS1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399.1		not-accessible	An entry in the mscLpDS3DS1ChanTcSigTwoTable.
mscLpDS3DS1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpDS3DS1ChanTest	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2
mscLpDS3DS1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12.1		not-accessible	An entry in the mscLpDS3DS1ChanTestResultsTable.
mscLpDS3DS1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3DS1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1ChanTest component.
mscLpDS3DS1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1ChanTest components.
mscLpDS3DS1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11.1		not-accessible	An entry in the mscLpDS3DS1ChanTestSetupTable.
mscLpDS3DS1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10.1		not-accessible	An entry in the mscLpDS3DS1ChanTestStateTable.
mscLpDS3DS1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.11.1		not-accessible	An entry in the mscLpDS3DS1CidDataTable.
mscLpDS3DS1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.5.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpDS3DS1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.13.1		not-accessible	An entry in the mscLpDS3DS1IfEntryTable.
mscLpDS3DS1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3DS1OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.16.1		not-accessible	An entry in the mscLpDS3DS1OperTable.
mscLpDS3DS1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.14.1		not-accessible	An entry in the mscLpDS3DS1OperStatusTable.
mscLpDS3DS1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3DS1OperTable	1.3.6.1.4.1.562.36.2.1.12.5.6.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpDS3DS1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.10.1		not-accessible	An entry in the mscLpDS3DS1ProvTable.
mscLpDS3DS1ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.6.10		not-accessible	This group contains all of the provisioning data for a DS1 component.
mscLpDS3DS1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1 component.
mscLpDS3DS1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1 components.
mscLpDS3DS1StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.15.1		not-accessible	An entry in the mscLpDS3DS1StateTable.
mscLpDS3DS1StateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3DS1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.17.1		not-accessible	An entry in the mscLpDS3DS1StatsTable.
mscLpDS3DS1StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.17		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpDS3DS1Test	1.3.6.1.4.1.562.36.2.1.12.5.6.3
mscLpDS3DS1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12.1		not-accessible	An entry in the mscLpDS3DS1TestResultsTable.
mscLpDS3DS1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3DS1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpDS3DS1Test component.
mscLpDS3DS1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpDS3DS1Test components.
mscLpDS3DS1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11.1		not-accessible	An entry in the mscLpDS3DS1TestSetupTable.
mscLpDS3DS1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3DS1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10.1		not-accessible	An entry in the mscLpDS3DS1TestStateTable.
mscLpDS3DS1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.6.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpDS3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.5.13.1		not-accessible	An entry in the mscLpDS3IfEntryTable.
mscLpDS3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.5.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpDS3OperEntry	1.3.6.1.4.1.562.36.2.1.12.5.16.1		not-accessible	An entry in the mscLpDS3OperTable.
mscLpDS3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.14.1		not-accessible	An entry in the mscLpDS3OperStatusTable.
mscLpDS3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpDS3OperTable	1.3.6.1.4.1.562.36.2.1.12.5.16		not-accessible	This group contains the common operational data for DS3 component.
mscLpDS3Plcp	1.3.6.1.4.1.562.36.2.1.12.5.4
mscLpDS3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.10.1		not-accessible	An entry in the mscLpDS3PlcpOperationalTable.
mscLpDS3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.5.4.10		not-accessible	This group contains the operational data for the PLCP component.
mscLpDS3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Plcp component.
mscLpDS3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.4.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Plcp components.
mscLpDS3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.4.11.1		not-accessible	An entry in the mscLpDS3PlcpStatsTable.
mscLpDS3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.5.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.5.10.1		not-accessible	An entry in the mscLpDS3ProvTable.
mscLpDS3ProvTable	1.3.6.1.4.1.562.36.2.1.12.5.10		not-accessible	This group contains all of the provisioning data for a DS3 component.
mscLpDS3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.1.1		not-accessible	A single entry in the table represents a single mscLpDS3 component.
mscLpDS3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.1		not-accessible	This entry controls the addition and deletion of mscLpDS3 components.
mscLpDS3StateEntry	1.3.6.1.4.1.562.36.2.1.12.5.15.1		not-accessible	An entry in the mscLpDS3StateTable.
mscLpDS3StateTable	1.3.6.1.4.1.562.36.2.1.12.5.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpDS3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.5.17.1		not-accessible	An entry in the mscLpDS3StatsTable.
mscLpDS3StatsTable	1.3.6.1.4.1.562.36.2.1.12.5.17		not-accessible	This group contains the specific DS3 common operational data for a DS3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpDS3Test	1.3.6.1.4.1.562.36.2.1.12.5.2
mscLpDS3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.12.1		not-accessible	An entry in the mscLpDS3TestResultsTable.
mscLpDS3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.5.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpDS3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.1.1		not-accessible	A single entry in the table represents a single mscLpDS3Test component.
mscLpDS3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.5.2.1		not-accessible	This entry controls the addition and deletion of mscLpDS3Test components.
mscLpDS3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.11.1		not-accessible	An entry in the mscLpDS3TestSetupTable.
mscLpDS3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.5.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpDS3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.5.2.10.1		not-accessible	An entry in the mscLpDS3TestStateTable.
mscLpDS3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.5.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE1	1.3.6.1.4.1.562.36.2.1.12.8
mscLpE1AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.12.1		not-accessible	An entry in the mscLpE1AdminInfoTable.
mscLpE1AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE1Audio	1.3.6.1.4.1.562.36.2.1.12.8.5
mscLpE1AudioRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1Audio component.
mscLpE1AudioRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1Audio components.
mscLpE1Chan	1.3.6.1.4.1.562.36.2.1.12.8.2
mscLpE1ChanAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.16.1		not-accessible	An entry in the mscLpE1ChanAdminInfoTable.
mscLpE1ChanAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.16		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE1ChanCell	1.3.6.1.4.1.562.36.2.1.12.8.2.3
mscLpE1ChanCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11.1		not-accessible	An entry in the mscLpE1ChanCellOperTable.
mscLpE1ChanCellOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE1ChanCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10.1		not-accessible	An entry in the mscLpE1ChanCellProvTable.
mscLpE1ChanCellProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpE1ChanCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanCell component.
mscLpE1ChanCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanCell components.
mscLpE1ChanCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12.1		not-accessible	An entry in the mscLpE1ChanCellStatsTable.
mscLpE1ChanCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE1ChanCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.11.1		not-accessible	An entry in the mscLpE1ChanCidDataTable.
mscLpE1ChanCidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE1ChanFlm	1.3.6.1.4.1.562.36.2.1.12.8.2.5
mscLpE1ChanFlmOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11.1		not-accessible	An entry in the mscLpE1ChanFlmOpTable.
mscLpE1ChanFlmOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.11		not-accessible	This group contains all specific operational data for an Flm component.
mscLpE1ChanFlmProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10.1		not-accessible	An entry in the mscLpE1ChanFlmProvTable.
mscLpE1ChanFlmProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.10		not-accessible	This group contains all specific provisioning data for an Flm component.
mscLpE1ChanFlmRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanFlm component.
mscLpE1ChanFlmRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.5.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanFlm components.
mscLpE1ChanIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.12.1		not-accessible	An entry in the mscLpE1ChanIfEntryTable.
mscLpE1ChanIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.2.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE1ChanOperEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.15.1		not-accessible	An entry in the mscLpE1ChanOperTable.
mscLpE1ChanOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.13.1		not-accessible	An entry in the mscLpE1ChanOperStatusTable.
mscLpE1ChanOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1ChanOperTable	1.3.6.1.4.1.562.36.2.1.12.8.2.15		not-accessible	This group contains all of the operational data for a Channel component.
mscLpE1ChanProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.10.1		not-accessible	An entry in the mscLpE1ChanProvTable.
mscLpE1ChanProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.10		not-accessible	This group contains all of the provisional data for a Channel component.
mscLpE1ChanRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1Chan component.
mscLpE1ChanRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1Chan components.
mscLpE1ChanStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.14.1		not-accessible	An entry in the mscLpE1ChanStateTable.
mscLpE1ChanStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE1ChanTc	1.3.6.1.4.1.562.36.2.1.12.8.2.4
mscLpE1ChanTcOpEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11.1		not-accessible	An entry in the mscLpE1ChanTcOpTable.
mscLpE1ChanTcOpTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.11		not-accessible	This group contains all specific operational data for a Tc component.
mscLpE1ChanTcProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10.1		not-accessible	An entry in the mscLpE1ChanTcProvTable.
mscLpE1ChanTcProvTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.10		not-accessible	This group contains all specific provisioning data for a Tc component.
mscLpE1ChanTcRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTc component.
mscLpE1ChanTcRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTc components.
mscLpE1ChanTcSigOneEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398.1		not-accessible	An entry in the mscLpE1ChanTcSigOneTable.
mscLpE1ChanTcSigOneTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.398		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted for the duration provisioned in signalOneDuration when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpE1ChanTcSigTwoEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399.1		not-accessible	An entry in the mscLpE1ChanTcSigTwoTable.
mscLpE1ChanTcSigTwoTable	1.3.6.1.4.1.562.36.2.1.12.8.2.4.399		not-accessible	This attribute specifies the value to be substituted into the ABCD signaling bits for the timeslots defined by the Chan component under fault conditions. The value will be substituted after the duration provisioned in signalOneDuration has expired and when a lineType that uses CAS has been defined. For a lineType of d4Cas (Super Frame), signaling bits C and D are required to equal bits A and B respectively.
mscLpE1ChanTest	1.3.6.1.4.1.562.36.2.1.12.8.2.2
mscLpE1ChanTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12.1		not-accessible	An entry in the mscLpE1ChanTestResultsTable.
mscLpE1ChanTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE1ChanTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpE1ChanTest component.
mscLpE1ChanTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpE1ChanTest components.
mscLpE1ChanTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11.1		not-accessible	An entry in the mscLpE1ChanTestSetupTable.
mscLpE1ChanTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1ChanTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10.1		not-accessible	An entry in the mscLpE1ChanTestStateTable.
mscLpE1ChanTestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.2.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE1CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.8.11.1		not-accessible	An entry in the mscLpE1CidDataTable.
mscLpE1CidDataTable	1.3.6.1.4.1.562.36.2.1.12.8.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE1Dsp	1.3.6.1.4.1.562.36.2.1.12.8.4
mscLpE1DspRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.4.1.1		not-accessible	A single entry in the table represents a single mscLpE1Dsp component.
mscLpE1DspRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.4.1		not-accessible	This entry controls the addition and deletion of mscLpE1Dsp components.
mscLpE1E1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.17.1		not-accessible	An entry in the mscLpE1E1OperTable.
mscLpE1E1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.17		not-accessible	This group contains all of the operational data for a E1 component that are not defined in the DSCommonOp group.
mscLpE1IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.8.13.1		not-accessible	An entry in the mscLpE1IfEntryTable.
mscLpE1IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.8.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE1OperEntry	1.3.6.1.4.1.562.36.2.1.12.8.16.1		not-accessible	An entry in the mscLpE1OperTable.
mscLpE1OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.14.1		not-accessible	An entry in the mscLpE1OperStatusTable.
mscLpE1OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE1OperTable	1.3.6.1.4.1.562.36.2.1.12.8.16		not-accessible	This group contains the common operational data for a component in a digital hierarchy interface.
mscLpE1ProvEntry	1.3.6.1.4.1.562.36.2.1.12.8.10.1		not-accessible	An entry in the mscLpE1ProvTable.
mscLpE1ProvTable	1.3.6.1.4.1.562.36.2.1.12.8.10		not-accessible	This group contains all of the provisioning data for an E1 component.
mscLpE1RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.1.1		not-accessible	A single entry in the table represents a single mscLpE1 component.
mscLpE1RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.1		not-accessible	This entry controls the addition and deletion of mscLpE1 components.
mscLpE1StateEntry	1.3.6.1.4.1.562.36.2.1.12.8.15.1		not-accessible	An entry in the mscLpE1StateTable.
mscLpE1StateTable	1.3.6.1.4.1.562.36.2.1.12.8.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE1StatsEntry	1.3.6.1.4.1.562.36.2.1.12.8.18.1		not-accessible	An entry in the mscLpE1StatsTable.
mscLpE1StatsTable	1.3.6.1.4.1.562.36.2.1.12.8.18		not-accessible	This group contains the common statistical data for a component in a digital hierarchy interface.
mscLpE1Test	1.3.6.1.4.1.562.36.2.1.12.8.3
mscLpE1TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.12.1		not-accessible	An entry in the mscLpE1TestResultsTable.
mscLpE1TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.8.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE1TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.1.1		not-accessible	A single entry in the table represents a single mscLpE1Test component.
mscLpE1TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.8.3.1		not-accessible	This entry controls the addition and deletion of mscLpE1Test components.
mscLpE1TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.11.1		not-accessible	An entry in the mscLpE1TestSetupTable.
mscLpE1TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.8.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE1TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.8.3.10.1		not-accessible	An entry in the mscLpE1TestStateTable.
mscLpE1TestStateTable	1.3.6.1.4.1.562.36.2.1.12.8.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpE3	1.3.6.1.4.1.562.36.2.1.12.6
mscLpE3AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.6.12.1		not-accessible	An entry in the mscLpE3AdminInfoTable.
mscLpE3AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.6.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpE3Cell	1.3.6.1.4.1.562.36.2.1.12.6.5
mscLpE3CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.11.1		not-accessible	An entry in the mscLpE3CellOperTable.
mscLpE3CellOperTable	1.3.6.1.4.1.562.36.2.1.12.6.5.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpE3CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.10.1		not-accessible	An entry in the mscLpE3CellProvTable.
mscLpE3CellProvTable	1.3.6.1.4.1.562.36.2.1.12.6.5.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpE3CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.1.1		not-accessible	A single entry in the table represents a single mscLpE3Cell component.
mscLpE3CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.5.1		not-accessible	This entry controls the addition and deletion of mscLpE3Cell components.
mscLpE3CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.5.12.1		not-accessible	An entry in the mscLpE3CellStatsTable.
mscLpE3CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.5.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.6.11.1		not-accessible	An entry in the mscLpE3CidDataTable.
mscLpE3CidDataTable	1.3.6.1.4.1.562.36.2.1.12.6.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpE3G832	1.3.6.1.4.1.562.36.2.1.12.6.3
mscLpE3G832OperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.11.1		not-accessible	An entry in the mscLpE3G832OperationalTable.
mscLpE3G832OperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.3.11		not-accessible	This group contains the operational data for the G832 component.
mscLpE3G832ProvisionedEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.10.1		not-accessible	An entry in the mscLpE3G832ProvisionedTable.
mscLpE3G832ProvisionedTable	1.3.6.1.4.1.562.36.2.1.12.6.3.10		not-accessible	This group contains the provisionable data for the G832 component.
mscLpE3G832RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.1.1		not-accessible	A single entry in the table represents a single mscLpE3G832 component.
mscLpE3G832RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.3.1		not-accessible	This entry controls the addition and deletion of mscLpE3G832 components.
mscLpE3G832StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.3.12.1		not-accessible	An entry in the mscLpE3G832StatsTable.
mscLpE3G832StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.3.12		not-accessible	This group contains the statistical data for the G832 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.6.13.1		not-accessible	An entry in the mscLpE3IfEntryTable.
mscLpE3IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.6.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpE3OperEntry	1.3.6.1.4.1.562.36.2.1.12.6.16.1		not-accessible	An entry in the mscLpE3OperTable.
mscLpE3OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.14.1		not-accessible	An entry in the mscLpE3OperStatusTable.
mscLpE3OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpE3OperTable	1.3.6.1.4.1.562.36.2.1.12.6.16		not-accessible	This group contains the common operational data for E3 component.
mscLpE3Plcp	1.3.6.1.4.1.562.36.2.1.12.6.4
mscLpE3PlcpOperationalEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.10.1		not-accessible	An entry in the mscLpE3PlcpOperationalTable.
mscLpE3PlcpOperationalTable	1.3.6.1.4.1.562.36.2.1.12.6.4.10		not-accessible	This group contains the operational data for the PLCP component.
mscLpE3PlcpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.1.1		not-accessible	A single entry in the table represents a single mscLpE3Plcp component.
mscLpE3PlcpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.4.1		not-accessible	This entry controls the addition and deletion of mscLpE3Plcp components.
mscLpE3PlcpStatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.4.11.1		not-accessible	An entry in the mscLpE3PlcpStatsTable.
mscLpE3PlcpStatsTable	1.3.6.1.4.1.562.36.2.1.12.6.4.11		not-accessible	This group contains the statistical data for the PLCP component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3ProvEntry	1.3.6.1.4.1.562.36.2.1.12.6.10.1		not-accessible	An entry in the mscLpE3ProvTable.
mscLpE3ProvTable	1.3.6.1.4.1.562.36.2.1.12.6.10		not-accessible	This group contains all of the provisioning data for a E3 component.
mscLpE3RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.1.1		not-accessible	A single entry in the table represents a single mscLpE3 component.
mscLpE3RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.1		not-accessible	This entry controls the addition and deletion of mscLpE3 components.
mscLpE3StateEntry	1.3.6.1.4.1.562.36.2.1.12.6.15.1		not-accessible	An entry in the mscLpE3StateTable.
mscLpE3StateTable	1.3.6.1.4.1.562.36.2.1.12.6.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpE3StatsEntry	1.3.6.1.4.1.562.36.2.1.12.6.17.1		not-accessible	An entry in the mscLpE3StatsTable.
mscLpE3StatsTable	1.3.6.1.4.1.562.36.2.1.12.6.17		not-accessible	This group contains the common operational data for E3 component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpE3Test	1.3.6.1.4.1.562.36.2.1.12.6.2
mscLpE3TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.12.1		not-accessible	An entry in the mscLpE3TestResultsTable.
mscLpE3TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.6.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpE3TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.1.1		not-accessible	A single entry in the table represents a single mscLpE3Test component.
mscLpE3TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.6.2.1		not-accessible	This entry controls the addition and deletion of mscLpE3Test components.
mscLpE3TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.11.1		not-accessible	An entry in the mscLpE3TestSetupTable.
mscLpE3TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.6.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpE3TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.6.2.10.1		not-accessible	An entry in the mscLpE3TestStateTable.
mscLpE3TestStateTable	1.3.6.1.4.1.562.36.2.1.12.6.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpEng	1.3.6.1.4.1.562.36.2.1.12.23
mscLpEngDs	1.3.6.1.4.1.562.36.2.1.12.23.2
mscLpEngDsOperEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.10.1		not-accessible	An entry in the mscLpEngDsOperTable.
mscLpEngDsOperTable	1.3.6.1.4.1.562.36.2.1.12.23.2.10		not-accessible	This group contains operational attributes for the DataStream components under Lp Engineering.
mscLpEngDsOv	1.3.6.1.4.1.562.36.2.1.12.23.2.2
mscLpEngDsOvProvEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10.1		not-accessible	An entry in the mscLpEngDsOvProvTable.
mscLpEngDsOvProvTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.10		not-accessible	This group contains provisionable attributes for the DataStream Ov components under Lp Engineering. DESCRIPTION
mscLpEngDsOvRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDsOv component.
mscLpEngDsOvRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDsOv components.
mscLpEngDsRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.2.1.1		not-accessible	A single entry in the table represents a single mscLpEngDs component.
mscLpEngDsRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.2.1		not-accessible	This entry controls the addition and deletion of mscLpEngDs components.
mscLpEngRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.23.1.1		not-accessible	A single entry in the table represents a single mscLpEng component.
mscLpEngRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.23.1		not-accessible	This entry controls the addition and deletion of mscLpEng components.
mscLpHssi	1.3.6.1.4.1.562.36.2.1.12.17
mscLpHssiAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.17.12.1		not-accessible	An entry in the mscLpHssiAdminInfoTable.
mscLpHssiAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.17.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpHssiCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.17.11.1		not-accessible	An entry in the mscLpHssiCidDataTable.
mscLpHssiCidDataTable	1.3.6.1.4.1.562.36.2.1.12.17.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpHssiIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.17.13.1		not-accessible	An entry in the mscLpHssiIfEntryTable.
mscLpHssiIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.17.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpHssiOperEntry	1.3.6.1.4.1.562.36.2.1.12.17.16.1		not-accessible	An entry in the mscLpHssiOperTable.
mscLpHssiOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.14.1		not-accessible	An entry in the mscLpHssiOperStatusTable.
mscLpHssiOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpHssiOperTable	1.3.6.1.4.1.562.36.2.1.12.17.16		not-accessible	This group contains all specific operational data for a Hssi component.
mscLpHssiProvEntry	1.3.6.1.4.1.562.36.2.1.12.17.10.1		not-accessible	An entry in the mscLpHssiProvTable.
mscLpHssiProvTable	1.3.6.1.4.1.562.36.2.1.12.17.10		not-accessible	This group contains the specific provisioning data for a Hssi component.
mscLpHssiRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.1.1		not-accessible	A single entry in the table represents a single mscLpHssi component.
mscLpHssiRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.1		not-accessible	This entry controls the addition and deletion of mscLpHssi components.
mscLpHssiStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.15.1		not-accessible	An entry in the mscLpHssiStateTable.
mscLpHssiStateTable	1.3.6.1.4.1.562.36.2.1.12.17.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpHssiTest	1.3.6.1.4.1.562.36.2.1.12.17.2
mscLpHssiTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.12.1		not-accessible	An entry in the mscLpHssiTestResultsTable.
mscLpHssiTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.17.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpHssiTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.1.1		not-accessible	A single entry in the table represents a single mscLpHssiTest component.
mscLpHssiTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.17.2.1		not-accessible	This entry controls the addition and deletion of mscLpHssiTest components.
mscLpHssiTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.11.1		not-accessible	An entry in the mscLpHssiTestSetupTable.
mscLpHssiTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.17.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpHssiTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.17.2.10.1		not-accessible	An entry in the mscLpHssiTestStateTable.
mscLpHssiTestStateTable	1.3.6.1.4.1.562.36.2.1.12.17.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpJT2	1.3.6.1.4.1.562.36.2.1.12.16
mscLpJT2AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.16.17.1		not-accessible	An entry in the mscLpJT2AdminInfoTable.
mscLpJT2AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.16.17		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpJT2Cell	1.3.6.1.4.1.562.36.2.1.12.16.3
mscLpJT2CellOperEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.11.1		not-accessible	An entry in the mscLpJT2CellOperTable.
mscLpJT2CellOperTable	1.3.6.1.4.1.562.36.2.1.12.16.3.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpJT2CellProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.10.1		not-accessible	An entry in the mscLpJT2CellProvTable.
mscLpJT2CellProvTable	1.3.6.1.4.1.562.36.2.1.12.16.3.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpJT2CellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Cell component.
mscLpJT2CellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.3.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Cell components.
mscLpJT2CellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.3.12.1		not-accessible	An entry in the mscLpJT2CellStatsTable.
mscLpJT2CellStatsTable	1.3.6.1.4.1.562.36.2.1.12.16.3.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpJT2CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.16.10.1		not-accessible	An entry in the mscLpJT2CidDataTable.
mscLpJT2CidDataTable	1.3.6.1.4.1.562.36.2.1.12.16.10		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpJT2IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.16.12.1		not-accessible	An entry in the mscLpJT2IfEntryTable.
mscLpJT2IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.16.12		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpJT2OperEntry	1.3.6.1.4.1.562.36.2.1.12.16.15.1		not-accessible	An entry in the mscLpJT2OperTable.
mscLpJT2OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.13.1		not-accessible	An entry in the mscLpJT2OperStatusTable.
mscLpJT2OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.13		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpJT2OperTable	1.3.6.1.4.1.562.36.2.1.12.16.15		not-accessible	This group contains the JT2 specific operational data for a JT2 component in a digital hierarchy interface.
mscLpJT2ProvEntry	1.3.6.1.4.1.562.36.2.1.12.16.11.1		not-accessible	An entry in the mscLpJT2ProvTable.
mscLpJT2ProvTable	1.3.6.1.4.1.562.36.2.1.12.16.11		not-accessible	This group contains all of the JT2 specific provisioning data for a JT2 component.
mscLpJT2RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.1.1		not-accessible	A single entry in the table represents a single mscLpJT2 component.
mscLpJT2RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.1		not-accessible	This entry controls the addition and deletion of mscLpJT2 components.
mscLpJT2StateEntry	1.3.6.1.4.1.562.36.2.1.12.16.14.1		not-accessible	An entry in the mscLpJT2StateTable.
mscLpJT2StateTable	1.3.6.1.4.1.562.36.2.1.12.16.14		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpJT2StatsEntry	1.3.6.1.4.1.562.36.2.1.12.16.16.1		not-accessible	An entry in the mscLpJT2StatsTable.
mscLpJT2StatsTable	1.3.6.1.4.1.562.36.2.1.12.16.16		not-accessible	This group contains the statistical data for a JT2 component in a digital hierarchy interface.
mscLpJT2Test	1.3.6.1.4.1.562.36.2.1.12.16.2
mscLpJT2TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.12.1		not-accessible	An entry in the mscLpJT2TestResultsTable.
mscLpJT2TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.16.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpJT2TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.1.1		not-accessible	A single entry in the table represents a single mscLpJT2Test component.
mscLpJT2TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.16.2.1		not-accessible	This entry controls the addition and deletion of mscLpJT2Test components.
mscLpJT2TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.11.1		not-accessible	An entry in the mscLpJT2TestSetupTable.
mscLpJT2TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.16.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpJT2TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.16.2.10.1		not-accessible	An entry in the mscLpJT2TestStateTable.
mscLpJT2TestStateTable	1.3.6.1.4.1.562.36.2.1.12.16.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpLinkToApplicationsEntry	1.3.6.1.4.1.562.36.2.1.12.242.1		not-accessible	An entry in the mscLpLinkToApplicationsTable.
mscLpLinkToApplicationsTable	1.3.6.1.4.1.562.36.2.1.12.242		not-accessible	This attribute allows applications to link themselves directly to the LP component.
mscLpMemoryCapacityEntry	1.3.6.1.4.1.562.36.2.1.12.244.1		not-accessible	An entry in the mscLpMemoryCapacityTable.
mscLpMemoryCapacityTable	1.3.6.1.4.1.562.36.2.1.12.244		not-accessible	This attribute indicates the processor card's memory capacity for each type of memory.
mscLpMemoryUsageAvgEntry	1.3.6.1.4.1.562.36.2.1.12.276.1		not-accessible	An entry in the mscLpMemoryUsageAvgTable.
mscLpMemoryUsageAvgMaxEntry	1.3.6.1.4.1.562.36.2.1.12.278.1		not-accessible	An entry in the mscLpMemoryUsageAvgMaxTable.
mscLpMemoryUsageAvgMaxTable	1.3.6.1.4.1.562.36.2.1.12.278		not-accessible	This attribute indicates the processor's maximum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageAvgMinEntry	1.3.6.1.4.1.562.36.2.1.12.277.1		not-accessible	An entry in the mscLpMemoryUsageAvgMinTable.
mscLpMemoryUsageAvgMinTable	1.3.6.1.4.1.562.36.2.1.12.277		not-accessible	This attribute indicates the processor's minimum memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageAvgTable	1.3.6.1.4.1.562.36.2.1.12.276		not-accessible	This attribute indicates the processor's average memory utilization for each type of memory in the specified time period, timeInterval. This value is calculated using 15 second samples.
mscLpMemoryUsageEntry	1.3.6.1.4.1.562.36.2.1.12.245.1		not-accessible	An entry in the mscLpMemoryUsageTable.
mscLpMemoryUsageTable	1.3.6.1.4.1.562.36.2.1.12.245		not-accessible	This attribute indicates the processor's current memory utilization for each type of memory.
mscLpOperEntry	1.3.6.1.4.1.562.36.2.1.12.103.1		not-accessible	An entry in the mscLpOperTable.
mscLpOperTable	1.3.6.1.4.1.562.36.2.1.12.103		not-accessible	This Group contains the operational attributes for the LP component.
mscLpProvEntry	1.3.6.1.4.1.562.36.2.1.12.100.1		not-accessible	An entry in the mscLpProvTable.
mscLpProvTable	1.3.6.1.4.1.562.36.2.1.12.100		not-accessible	This Group contains the provisionable attributes for the LP component.
mscLpRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.1.1		not-accessible	A single entry in the table represents a single mscLp component.
mscLpRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.1		not-accessible	This entry controls the addition and deletion of mscLp components.
mscLpSdh	1.3.6.1.4.1.562.36.2.1.12.15
mscLpSdhAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.15.12.1		not-accessible	An entry in the mscLpSdhAdminInfoTable.
mscLpSdhAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.15.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpSdhCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.11.1		not-accessible	An entry in the mscLpSdhCidDataTable.
mscLpSdhCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSdhIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.13.1		not-accessible	An entry in the mscLpSdhIfEntryTable.
mscLpSdhIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSdhOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.16.1		not-accessible	An entry in the mscLpSdhOperTable.
mscLpSdhOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.14.1		not-accessible	An entry in the mscLpSdhOperStatusTable.
mscLpSdhOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhOperTable	1.3.6.1.4.1.562.36.2.1.12.15.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSdhPath	1.3.6.1.4.1.562.36.2.1.12.15.2
mscLpSdhPathCell	1.3.6.1.4.1.562.36.2.1.12.15.2.2
mscLpSdhPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11.1		not-accessible	An entry in the mscLpSdhPathCellOperTable.
mscLpSdhPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSdhPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10.1		not-accessible	An entry in the mscLpSdhPathCellProvTable.
mscLpSdhPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpSdhPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPathCell component.
mscLpSdhPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPathCell components.
mscLpSdhPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12.1		not-accessible	An entry in the mscLpSdhPathCellStatsTable.
mscLpSdhPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.11.1		not-accessible	An entry in the mscLpSdhPathCidDataTable.
mscLpSdhPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.15.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSdhPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.13.1		not-accessible	An entry in the mscLpSdhPathIfEntryTable.
mscLpSdhPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.15.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSdhPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.15.1		not-accessible	An entry in the mscLpSdhPathOperTable.
mscLpSdhPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.14.1		not-accessible	An entry in the mscLpSdhPathOperStatusTable.
mscLpSdhPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSdhPathOperTable	1.3.6.1.4.1.562.36.2.1.12.15.2.15		not-accessible	This group contains the common operational data for Path component.
mscLpSdhPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.10.1		not-accessible	An entry in the mscLpSdhPathProvTable.
mscLpSdhPathProvTable	1.3.6.1.4.1.562.36.2.1.12.15.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
mscLpSdhPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.1.1		not-accessible	A single entry in the table represents a single mscLpSdhPath component.
mscLpSdhPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.2.1		not-accessible	This entry controls the addition and deletion of mscLpSdhPath components.
mscLpSdhPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.12.1		not-accessible	An entry in the mscLpSdhPathStateTable.
mscLpSdhPathStateTable	1.3.6.1.4.1.562.36.2.1.12.15.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.2.16.1		not-accessible	An entry in the mscLpSdhPathStatsTable.
mscLpSdhPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhProvEntry	1.3.6.1.4.1.562.36.2.1.12.15.10.1		not-accessible	An entry in the mscLpSdhProvTable.
mscLpSdhProvTable	1.3.6.1.4.1.562.36.2.1.12.15.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
mscLpSdhRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.1.1		not-accessible	A single entry in the table represents a single mscLpSdh component.
mscLpSdhRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.1		not-accessible	This entry controls the addition and deletion of mscLpSdh components.
mscLpSdhStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.15.1		not-accessible	An entry in the mscLpSdhStateTable.
mscLpSdhStateTable	1.3.6.1.4.1.562.36.2.1.12.15.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSdhStatsEntry	1.3.6.1.4.1.562.36.2.1.12.15.17.1		not-accessible	An entry in the mscLpSdhStatsTable.
mscLpSdhStatsTable	1.3.6.1.4.1.562.36.2.1.12.15.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSdhTest	1.3.6.1.4.1.562.36.2.1.12.15.3
mscLpSdhTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.12.1		not-accessible	An entry in the mscLpSdhTestResultsTable.
mscLpSdhTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.15.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpSdhTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.1.1		not-accessible	A single entry in the table represents a single mscLpSdhTest component.
mscLpSdhTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.15.3.1		not-accessible	This entry controls the addition and deletion of mscLpSdhTest components.
mscLpSdhTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.11.1		not-accessible	An entry in the mscLpSdhTestSetupTable.
mscLpSdhTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.15.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSdhTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.15.3.10.1		not-accessible	An entry in the mscLpSdhTestStateTable.
mscLpSdhTestStateTable	1.3.6.1.4.1.562.36.2.1.12.15.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpSonet	1.3.6.1.4.1.562.36.2.1.12.14
mscLpSonetAdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.14.12.1		not-accessible	An entry in the mscLpSonetAdminInfoTable.
mscLpSonetAdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.14.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpSonetCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.11.1		not-accessible	An entry in the mscLpSonetCidDataTable.
mscLpSonetCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSonetIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.13.1		not-accessible	An entry in the mscLpSonetIfEntryTable.
mscLpSonetIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSonetOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.16.1		not-accessible	An entry in the mscLpSonetOperTable.
mscLpSonetOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.14.1		not-accessible	An entry in the mscLpSonetOperStatusTable.
mscLpSonetOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetOperTable	1.3.6.1.4.1.562.36.2.1.12.14.16		not-accessible	This group contains the common operational data for Sonet or Sdh component.
mscLpSonetPath	1.3.6.1.4.1.562.36.2.1.12.14.2
mscLpSonetPathCell	1.3.6.1.4.1.562.36.2.1.12.14.2.2
mscLpSonetPathCellOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11.1		not-accessible	An entry in the mscLpSonetPathCellOperTable.
mscLpSonetPathCellOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.11		not-accessible	This group contains the common operational attributes for the AtmCell component.
mscLpSonetPathCellProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10.1		not-accessible	An entry in the mscLpSonetPathCellProvTable.
mscLpSonetPathCellProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.10		not-accessible	This group contains the provisioning attributes for the AtmCell component.
mscLpSonetPathCellRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPathCell component.
mscLpSonetPathCellRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPathCell components.
mscLpSonetPathCellStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12.1		not-accessible	An entry in the mscLpSonetPathCellStatsTable.
mscLpSonetPathCellStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.2.12		not-accessible	This group contains the Statistics attribute for the AtmCell component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetPathCidDataEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.11.1		not-accessible	An entry in the mscLpSonetPathCidDataTable.
mscLpSonetPathCidDataTable	1.3.6.1.4.1.562.36.2.1.12.14.2.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpSonetPathIfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.13.1		not-accessible	An entry in the mscLpSonetPathIfEntryTable.
mscLpSonetPathIfEntryTable	1.3.6.1.4.1.562.36.2.1.12.14.2.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpSonetPathOperEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.15.1		not-accessible	An entry in the mscLpSonetPathOperTable.
mscLpSonetPathOperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.14.1		not-accessible	An entry in the mscLpSonetPathOperStatusTable.
mscLpSonetPathOperStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpSonetPathOperTable	1.3.6.1.4.1.562.36.2.1.12.14.2.15		not-accessible	This group contains the common operational data for Path component.
mscLpSonetPathProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.10.1		not-accessible	An entry in the mscLpSonetPathProvTable.
mscLpSonetPathProvTable	1.3.6.1.4.1.562.36.2.1.12.14.2.10		not-accessible	This group contains all of the provisioning data for a Sonet/Sdh Path component.
mscLpSonetPathRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.1.1		not-accessible	A single entry in the table represents a single mscLpSonetPath component.
mscLpSonetPathRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.2.1		not-accessible	This entry controls the addition and deletion of mscLpSonetPath components.
mscLpSonetPathStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.12.1		not-accessible	An entry in the mscLpSonetPathStateTable.
mscLpSonetPathStateTable	1.3.6.1.4.1.562.36.2.1.12.14.2.12		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetPathStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.2.16.1		not-accessible	An entry in the mscLpSonetPathStatsTable.
mscLpSonetPathStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.2.16		not-accessible	This group contains the statistics data for a Sonet/Sdh Path component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetProvEntry	1.3.6.1.4.1.562.36.2.1.12.14.10.1		not-accessible	An entry in the mscLpSonetProvTable.
mscLpSonetProvTable	1.3.6.1.4.1.562.36.2.1.12.14.10		not-accessible	This group contains all of the provisioning data for a Sonet or Sdh component.
mscLpSonetRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.1.1		not-accessible	A single entry in the table represents a single mscLpSonet component.
mscLpSonetRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.1		not-accessible	This entry controls the addition and deletion of mscLpSonet components.
mscLpSonetStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.15.1		not-accessible	An entry in the mscLpSonetStateTable.
mscLpSonetStateTable	1.3.6.1.4.1.562.36.2.1.12.14.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpSonetStatsEntry	1.3.6.1.4.1.562.36.2.1.12.14.17.1		not-accessible	An entry in the mscLpSonetStatsTable.
mscLpSonetStatsTable	1.3.6.1.4.1.562.36.2.1.12.14.17		not-accessible	This group contains the statistics data for a Sonet or Sdh component. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero.
mscLpSonetTest	1.3.6.1.4.1.562.36.2.1.12.14.3
mscLpSonetTestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.12.1		not-accessible	An entry in the mscLpSonetTestResultsTable.
mscLpSonetTestResultsTable	1.3.6.1.4.1.562.36.2.1.12.14.3.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpSonetTestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.1.1		not-accessible	A single entry in the table represents a single mscLpSonetTest component.
mscLpSonetTestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.14.3.1		not-accessible	This entry controls the addition and deletion of mscLpSonetTest components.
mscLpSonetTestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.11.1		not-accessible	An entry in the mscLpSonetTestSetupTable.
mscLpSonetTestSetupTable	1.3.6.1.4.1.562.36.2.1.12.14.3.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpSonetTestStateEntry	1.3.6.1.4.1.562.36.2.1.12.14.3.10.1		not-accessible	An entry in the mscLpSonetTestStateTable.
mscLpSonetTestStateTable	1.3.6.1.4.1.562.36.2.1.12.14.3.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpStateEntry	1.3.6.1.4.1.562.36.2.1.12.102.1		not-accessible	An entry in the mscLpStateTable.
mscLpStateTable	1.3.6.1.4.1.562.36.2.1.12.102		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpUtilEntry	1.3.6.1.4.1.562.36.2.1.12.104.1		not-accessible	An entry in the mscLpUtilTable.
mscLpUtilTable	1.3.6.1.4.1.562.36.2.1.12.104		not-accessible	This group contains the operational attributes that specify the processor's utilization levels. When this group exists for an LP component, the attributes are representative of the active card.
mscLpV35	1.3.6.1.4.1.562.36.2.1.12.9
mscLpV35AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.9.12.1		not-accessible	An entry in the mscLpV35AdminInfoTable.
mscLpV35AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.9.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpV35CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.9.11.1		not-accessible	An entry in the mscLpV35CidDataTable.
mscLpV35CidDataTable	1.3.6.1.4.1.562.36.2.1.12.9.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpV35IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.9.13.1		not-accessible	An entry in the mscLpV35IfEntryTable.
mscLpV35IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.9.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpV35OperEntry	1.3.6.1.4.1.562.36.2.1.12.9.16.1		not-accessible	An entry in the mscLpV35OperTable.
mscLpV35OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.14.1		not-accessible	An entry in the mscLpV35OperStatusTable.
mscLpV35OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpV35OperTable	1.3.6.1.4.1.562.36.2.1.12.9.16		not-accessible	This group contains all specific operational data for a V35 component.
mscLpV35ProvEntry	1.3.6.1.4.1.562.36.2.1.12.9.10.1		not-accessible	An entry in the mscLpV35ProvTable.
mscLpV35ProvTable	1.3.6.1.4.1.562.36.2.1.12.9.10		not-accessible	This group contains all specific provisioning data for a V35 component.
mscLpV35RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.1.1		not-accessible	A single entry in the table represents a single mscLpV35 component.
mscLpV35RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.1		not-accessible	This entry controls the addition and deletion of mscLpV35 components.
mscLpV35StateEntry	1.3.6.1.4.1.562.36.2.1.12.9.15.1		not-accessible	An entry in the mscLpV35StateTable.
mscLpV35StateTable	1.3.6.1.4.1.562.36.2.1.12.9.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpV35Test	1.3.6.1.4.1.562.36.2.1.12.9.2
mscLpV35TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.12.1		not-accessible	An entry in the mscLpV35TestResultsTable.
mscLpV35TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.9.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpV35TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.1.1		not-accessible	A single entry in the table represents a single mscLpV35Test component.
mscLpV35TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.9.2.1		not-accessible	This entry controls the addition and deletion of mscLpV35Test components.
mscLpV35TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.11.1		not-accessible	An entry in the mscLpV35TestSetupTable.
mscLpV35TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.9.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpV35TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.9.2.10.1		not-accessible	An entry in the mscLpV35TestStateTable.
mscLpV35TestStateTable	1.3.6.1.4.1.562.36.2.1.12.9.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscLpX21	1.3.6.1.4.1.562.36.2.1.12.10
mscLpX21AdminInfoEntry	1.3.6.1.4.1.562.36.2.1.12.10.12.1		not-accessible	An entry in the mscLpX21AdminInfoTable.
mscLpX21AdminInfoTable	1.3.6.1.4.1.562.36.2.1.12.10.12		not-accessible	This group contains the attributes pertaining to the vendor of the equipment.
mscLpX21CidDataEntry	1.3.6.1.4.1.562.36.2.1.12.10.11.1		not-accessible	An entry in the mscLpX21CidDataTable.
mscLpX21CidDataTable	1.3.6.1.4.1.562.36.2.1.12.10.11		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
mscLpX21IfEntryEntry	1.3.6.1.4.1.562.36.2.1.12.10.13.1		not-accessible	An entry in the mscLpX21IfEntryTable.
mscLpX21IfEntryTable	1.3.6.1.4.1.562.36.2.1.12.10.13		not-accessible	This group contains the provisionable attributes for the ifEntry.
mscLpX21OperEntry	1.3.6.1.4.1.562.36.2.1.12.10.16.1		not-accessible	An entry in the mscLpX21OperTable.
mscLpX21OperStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.14.1		not-accessible	An entry in the mscLpX21OperStatusTable.
mscLpX21OperStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.14		not-accessible	This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
mscLpX21OperTable	1.3.6.1.4.1.562.36.2.1.12.10.16		not-accessible	This group contains all specific operational data for an X21 component.
mscLpX21ProvEntry	1.3.6.1.4.1.562.36.2.1.12.10.10.1		not-accessible	An entry in the mscLpX21ProvTable.
mscLpX21ProvTable	1.3.6.1.4.1.562.36.2.1.12.10.10		not-accessible	This group contains all specific provisioning data for an X21 component.
mscLpX21RowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.1.1		not-accessible	A single entry in the table represents a single mscLpX21 component.
mscLpX21RowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.1		not-accessible	This entry controls the addition and deletion of mscLpX21 components.
mscLpX21StateEntry	1.3.6.1.4.1.562.36.2.1.12.10.15.1		not-accessible	An entry in the mscLpX21StateTable.
mscLpX21StateTable	1.3.6.1.4.1.562.36.2.1.12.10.15		not-accessible	This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
mscLpX21Test	1.3.6.1.4.1.562.36.2.1.12.10.2
mscLpX21TestResultsEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.12.1		not-accessible	An entry in the mscLpX21TestResultsTable.
mscLpX21TestResultsTable	1.3.6.1.4.1.562.36.2.1.12.10.2.12		not-accessible	This group contains all the statistics related attributes of the Test component.
mscLpX21TestRowStatusEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.1.1		not-accessible	A single entry in the table represents a single mscLpX21Test component.
mscLpX21TestRowStatusTable	1.3.6.1.4.1.562.36.2.1.12.10.2.1		not-accessible	This entry controls the addition and deletion of mscLpX21Test components.
mscLpX21TestSetupEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.11.1		not-accessible	An entry in the mscLpX21TestSetupTable.
mscLpX21TestSetupTable	1.3.6.1.4.1.562.36.2.1.12.10.2.11		not-accessible	This group contains all of the operational data for a Test component.
mscLpX21TestStateEntry	1.3.6.1.4.1.562.36.2.1.12.10.2.10.1		not-accessible	An entry in the mscLpX21TestStateTable.
mscLpX21TestStateTable	1.3.6.1.4.1.562.36.2.1.12.10.2.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.

FAQ

How would this MIB help verify processor redundancy on a Nortel MsCarrier MscPassport switch?
It exposes provisioning tables (centered on mscLpProvTable) that identify the main processor card and the assigned spare card for each logical processor, along with the logical processor's type. Checking whether a logical processor has a healthy main card and an available spare is exactly how you'd assess the switch's processing redundancy and failover readiness before an outage occurs.

Why would an engineer inspect this MIB in a browser before setting up automated redundancy polling?
Because the module uses a row-status/component provisioning pattern, engineers often load it into a MIB browser first to understand the mscLpProvTable structure -- how main/spare card assignments and logical processor rows are laid out -- before writing automated polling that tracks redundancy status across a carrier's Passport switch deployment.

RFC description

Nortel Networks vendor-specific MIB for MSCarrier (Passport) telecom switching platform defining logical processor control, status, and resource management objects.

Start monitoring Nortel MsCarrier MscPassport switch (logical processor/card redundancy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

This MIB depends on

Related MIBs

What Is Nortel-MsCarrier-MscPassport-LogicalProcessorMIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

FAQ

RFC description