All MIBs › Nortel-MsCarrier-MscPassport-LogicalProcessorMIB › mscLpX21DteDataClockSource
mscLpX21DteDataClockSource
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpX21DteDataClockSource
OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute is only used when the actualLinkMode is dce. It is used to determine the clock to be used to recover the receive data. Note that a V.11 DTE interface uses the S clock (see X.21 standard) for both receive data and transmit data timing. The DTE interface always loops the received S clock back to the DCE as the X clock (see X.21 standard).
If the value of the attribute is fromDce, the DCE V.11 interface uses the internally generated transmit clock as the S clock and for both receive and transmit data timing. The X clock is ignored.
If the value of the attribute is fromDte, the DCE still uses the internally generated transmit clock as the S clock and for transmit data timing, but the receive data timing is derived from the X clock.
The fromDte mode is recommended when the DTE is far away from the DCE interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpX21DteDataClockSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpX21DteDataClockSource.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7.1 i <value>
Start monitoring Nortel MsCarrier MscPassport switch (logical processor/card redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpX21DteDataClockSource OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (logical processor/card redundancy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12 | mscLp | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.36.2.1.12.10 | mscLpX21 | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.36.2.1.12.10.10 | mscLpX21ProvTable | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1 | mscLpX21ProvEntry | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.36.2.1.12.10.10.1.7 | mscLpX21DteDataClockSource | Nortel-MsCarrier-MscPassport-LogicalProcessorMIB |