All MIBs › Nortel-MsCarrier-MscPassport-IpMIB
Category: IP Routing & Forwarding, Nortel MsCarrier MscPassport
Description:
Defines SNMP management objects for IP routing, addressing, and forwarding on Nortel MsCarrier MscPassport switches.
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| AreaID | |
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| InterfaceIndex | |
| PhysAddress | |
| RouterID | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| AsciiStringIndex | |
| DashedHexString | |
| HexString | |
| Link | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscPassportMIBs | OBJECT-IDENTITY |
From Nortel-MsCarrier-MscPassport-VirtualRouterMIB
| mscVr | OBJECT-IDENTITY |
| mscVrIndex | OBJECT-TYPE |
| mscVrPp | OBJECT-IDENTITY |
| mscVrPpIndex | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress |
What Is Nortel-MsCarrier-MscPassport-IpMIB?
Nortel-MsCarrier-MscPassport-IpMIB is a Nortel-specific module for the MainStreet/Passport (MSC Passport) carrier multiservice switching platform, managing IP-layer configuration on the switch's logical ports. It exposes per-port IP provisioning data—row/creation status, storage type, maximum transmission unit, and ARP/proxy-ARP enable status—for IP ports configured within the switch's virtual router/port framework. As a configuration-oriented MIB its monitoring value is mainly operational-status: mscVrPpIpPortRowStatus reveals whether a logical IP port is active, not-in-service, or being created/destroyed, while ARP and proxy-ARP status flags confirm whether address resolution behavior is enabled as expected for that port—useful for diagnosing routing or connectivity faults rather than raw hardware health, and locating the right Nortel-MsCarrier-MscPassport-IpMIB OID for a given logical port typically starts with mscVrPpIpPortRowStatusTable since its index ties directly to that port's virtual-router/port identifier. It explicitly imports from and layers on top of the standard IETF IP-MIB (ipMIB), reusing its addressing model for the Passport's own logical port abstraction. It is deployed specifically on Nortel/Alcatel-Lucent MainStreet Passport carrier switches used in service-provider WAN/frame relay/ATM aggregation networks.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-IpMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- IP port row/administrative status
- IP port MTU (max transmit unit)
- ARP enable status
- proxy ARP enable status
- IP port provisioning/storage type
Supported Devices
- Nortel/Alcatel-Lucent MainStreet Passport (MSC Passport) multiservice switch
Monitoring Examples
An administrator would poll mscVrPpIpPortRowStatusTable/mscVrPpIpPortRowStatusEntry, checking mscVrPpIpPortRowStatus to confirm a provisioned IP port entry is active rather than stuck in notReady or notInService. mscVrPpIpPortProvTable's mscVrPpIpPortMaxTxUnit would be checked against expected MTU to rule out fragmentation issues, while mscVrPpIpPortArpStatus/mscVrPpIpPortProxyArpStatus reveal whether ARP or proxy-ARP has been inadvertently disabled on a port, explaining a sudden loss of Layer 3 reachability through that logical interface.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscVrPpIpPort | 1.3.6.1.4.1.562.36.2.1.100.3.5 | |||
| mscVrPpIpPortRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPort components. | |
| mscVrPpIpPortRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPort component. | |
| ROW mscVrPpIpPortRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPort components. These components can be added and deleted. |
| STR mscVrPpIpPortComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPort tables. |
| NON mscVrPpIpPortIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrPpIpPort tables. |
| mscVrPpIpPortLogicalIf | 1.3.6.1.4.1.562.36.2.1.100.3.5.2 | |||
| mscVrPpIpPortLogicalIfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIf components. | |
| mscVrPpIpPortLogicalIfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIf component. | |
| ROW mscVrPpIpPortLogicalIfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIf components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIf tables. |
| IP mscVrPpIpPortLogicalIfAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIf tables. |
| mscVrPpIpPortLogicalIfOspfIf | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2 | |||
| mscVrPpIpPortLogicalIfOspfIfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIfOspfIf components. | |
| mscVrPpIpPortLogicalIfOspfIfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIfOspfIf component. | |
| ROW mscVrPpIpPortLogicalIfOspfIfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIfOspfIf components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfOspfIfComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfOspfIfStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIfOspfIf tables. |
| NON mscVrPpIpPortLogicalIfOspfIfIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIfOspfIf tables. |
| mscVrPpIpPortLogicalIfOspfIfTOS | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2 | |||
| mscVrPpIpPortLogicalIfOspfIfTOSRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIfOspfIfTOS components. | |
| mscVrPpIpPortLogicalIfOspfIfTOSRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIfOspfIfTOS component. | |
| ROW mscVrPpIpPortLogicalIfOspfIfTOSRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIfOspfIfTOS components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfOspfIfTOSComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfOspfIfTOSStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIfOspfIfTOS tables. |
| I32 mscVrPpIpPortLogicalIfOspfIfTOSMetricTosIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIfOspfIfTOS tables. |
| mscVrPpIpPortLogicalIfOspfIfTOSProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.10 | not-accessible | Identifies a provisionable set of attributes. | |
| mscVrPpIpPortLogicalIfOspfIfTOSProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.10.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfTOSProvTable. | |
| U32 mscVrPpIpPortLogicalIfOspfIfTOSTosMetric | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.2.10.1.1 | Unsigned32 | read-write | The metric using this typeOfService on this interface. |
| mscVrPpIpPortLogicalIfOspfIfNbr | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3 | |||
| mscVrPpIpPortLogicalIfOspfIfNbrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIfOspfIfNbr components. | |
| mscVrPpIpPortLogicalIfOspfIfNbrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIfOspfIfNbr component. | |
| ROW mscVrPpIpPortLogicalIfOspfIfNbrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIfOspfIfNbr components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfOspfIfNbrComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfOspfIfNbrStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIfOspfIfNbr tables. |
| IP mscVrPpIpPortLogicalIfOspfIfNbrAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIfOspfIfNbr tables. |
| mscVrPpIpPortLogicalIfOspfIfNbrProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.10 | not-accessible | Identifies a group of Provisionable attributes. | |
| mscVrPpIpPortLogicalIfOspfIfNbrProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.10.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfNbrProvTable. | |
| U32 mscVrPpIpPortLogicalIfOspfIfNbrPriority | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.10.1.1 | Unsigned32 | read-write | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. The higher the number, the better are the chances of being a designated router. |
| mscVrPpIpPortLogicalIfOspfIfNbrOperTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11 | not-accessible | Contains the Operational set of attributes for the Neighbor. | |
| mscVrPpIpPortLogicalIfOspfIfNbrOperEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfNbrOperTable. | |
| ROU mscVrPpIpPortLogicalIfOspfIfNbrRtrId | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.1 | RouterID | read-only | An Ip Address uniquely identifying the neighboring router in the Autonomous System. |
| U32 mscVrPpIpPortLogicalIfOspfIfNbrOptions | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.2 | Unsigned32 | read-only | A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing. |
| INT mscVrPpIpPortLogicalIfOspfIfNbrState | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.3 | INTEGER | read-only | The state of the relationship with this neighbor. |
| C32 mscVrPpIpPortLogicalIfOspfIfNbrEvents | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.4 | Counter32 | read-only | The number of times this neighbor relationship has changed state, or an error has occurred. |
| G32 mscVrPpIpPortLogicalIfOspfIfNbrLsRetransQlen | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.5 | Gauge32 | read-only | The current length of the Retransmission queue. |
| INT mscVrPpIpPortLogicalIfOspfIfNbrExchangeStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.6 | INTEGER | read-only | Indicates the exchange status for a neighbor Entry. |
| INT mscVrPpIpPortLogicalIfOspfIfNbrPermanance | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.3.11.1.9 | INTEGER | read-only | This attribute displays how the neighbor became an entry. |
| mscVrPpIpPortLogicalIfOspfIfProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10 | not-accessible | This group of attributes identifies a provisionable set of attributes. | |
| mscVrPpIpPortLogicalIfOspfIfProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfProvTable. | |
| ARE mscVrPpIpPortLogicalIfOspfIfAreaId | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.1 | AreaID | read-write | The area Id this Ospf interface belongs to. |
| INT mscVrPpIpPortLogicalIfOspfIfIfType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.2 | INTEGER | read-write | This attribute indicates the type of this Ospf interface. This interface type does not necessarily correlate with the type of the interface set on the logicalIf entry under IpPort. |
| INT mscVrPpIpPortLogicalIfOspfIfSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.3 | INTEGER | read-write | The administrative status of this Ospf interface. |
| U32 mscVrPpIpPortLogicalIfOspfIfRtrPriority | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.4 | Unsigned32 | read-write | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular protocol port. In the event of a tie in this value, routers will use their routerId as a tie breaker. |
| U32 mscVrPpIpPortLogicalIfOspfIfTransitDelay | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.5 | Unsigned32 | read-write | The estimated number of seconds it takes to transmit a link-state update packet over this interface. |
| U32 mscVrPpIpPortLogicalIfOspfIfRetransInterval | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.6 | Unsigned32 | read-write | The number of seconds between link-state advertisements retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. |
| U32 mscVrPpIpPortLogicalIfOspfIfHelloInterval | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.7 | Unsigned32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. |
| U32 mscVrPpIpPortLogicalIfOspfIfRtrDeadInterval | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.8 | Unsigned32 | read-write | The number of seconds that a router's hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the helloIntereval. This value must be the same for all routers attached to a common network. |
| U32 mscVrPpIpPortLogicalIfOspfIfPollInterval | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.9 | Unsigned32 | read-write | The largest time interval, in seconds, between the hello packets sent to an inactive non-broadcast multi-access neighbor. |
| STR mscVrPpIpPortLogicalIfOspfIfAuthKey | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.10 | HexString | write-only | The Authentication Key. If the value of the attribute authType of an AreaEntry is simplePassword, and the authKey length is shorter than 8 octets, then the value of authKey will be left adjusted zero-filled to 8 octets. |
| INT mscVrPpIpPortLogicalIfOspfIfMulticastForwarding | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.10.1.12 | INTEGER | read-write | The way multicasts should be forwarded on this interface; non forwarded, forwarded as data-link multicasts, or forwarded as data-link unicasts. Data-link multicasting is not meaningful on point-to-point and NBMA(No Broadcast Multi Access) interfaces, and setting this attribute to blocked effectively disables all multicast forwarding. |
| mscVrPpIpPortLogicalIfOspfIfOperTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11 | not-accessible | This group of attributes identifies operational state that this interface is performing. | |
| mscVrPpIpPortLogicalIfOspfIfOperEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfOperTable. | |
| INT mscVrPpIpPortLogicalIfOspfIfState | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11.1.1 | INTEGER | read-only | The state of the OSPF interface. |
| IP mscVrPpIpPortLogicalIfOspfIfDesignatedRouter | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11.1.2 | IpAddress | read-only | The Ip address of the designated router. |
| IP mscVrPpIpPortLogicalIfOspfIfBackupDesignatedRouter | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11.1.3 | IpAddress | read-only | The Ip address of the backup designated router |
| C32 mscVrPpIpPortLogicalIfOspfIfEvents | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.11.1.4 | Counter32 | read-only | The number of times this OSPF interface has changed its state or an error has occurred. |
| mscVrPpIpPortLogicalIfOspfIfMetricTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.12 | not-accessible | This group contains the operational metric attribute of this interface. | |
| mscVrPpIpPortLogicalIfOspfIfMetricEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.12.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfOspfIfMetricTable. | |
| U32 mscVrPpIpPortLogicalIfOspfIfMetric | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.2.12.1.1 | Unsigned32 | read-only | This attribute indicates the metric being used by this OspfIf. The metric is derived in one of two ways: 1. If there is a TypeOfService component provisioned under this OspfIf component, then the value of the metric attribute is copied from the provisionable attribute tosMetric. 2. Otherwise, the metric is computed based on the interface speed. If the interface speed is greater than 100 Mbit/s, then the metric is 1. If the interface speed is less than 100 Mbit/s, then the metric is 100 Mbit/s divided by the interface speed. If the interface speed is unknown, then it is treated as 1.54 Mbit/s during the calculation. The value of interface speed is available by displaying the ifSpeed attribute of the corresponding IfTableEntry component. |
| mscVrPpIpPortLogicalIfRipIf | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3 | |||
| mscVrPpIpPortLogicalIfRipIfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIfRipIf components. | |
| mscVrPpIpPortLogicalIfRipIfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIfRipIf component. | |
| ROW mscVrPpIpPortLogicalIfRipIfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIfRipIf components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfRipIfComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfRipIfStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIfRipIf tables. |
| NON mscVrPpIpPortLogicalIfRipIfIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIfRipIf tables. |
| mscVrPpIpPortLogicalIfRipIfNbr | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2 | |||
| mscVrPpIpPortLogicalIfRipIfNbrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortLogicalIfRipIfNbr components. | |
| mscVrPpIpPortLogicalIfRipIfNbrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortLogicalIfRipIfNbr component. | |
| ROW mscVrPpIpPortLogicalIfRipIfNbrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortLogicalIfRipIfNbr components. These components can be added and deleted. |
| STR mscVrPpIpPortLogicalIfRipIfNbrComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortLogicalIfRipIfNbrStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortLogicalIfRipIfNbr tables. |
| IP mscVrPpIpPortLogicalIfRipIfNbrIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrPpIpPortLogicalIfRipIfNbr tables. |
| mscVrPpIpPortLogicalIfRipIfProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10 | not-accessible | This group contains the provisionable attributes of the RipIf component. | |
| mscVrPpIpPortLogicalIfRipIfProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfRipIfProvTable. | |
| INT mscVrPpIpPortLogicalIfRipIfSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.1 | INTEGER | read-write | Identifies the administrative status of this RipInterface. Setting this value to disabled will have the effect of rendering it inactive. |
| U32 mscVrPpIpPortLogicalIfRipIfMetric | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.2 | Unsigned32 | read-write | This attribute is the RIP metric for this logical interface. |
| INT mscVrPpIpPortLogicalIfRipIfSilentFlag | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.3 | INTEGER | read-write | If the value of this attribute is set to true, the protocol will only listen to RIP updates, If set to false, then Rip will listen and send RIP updates.This attribute has been migrated to ifConfSend. |
| INT mscVrPpIpPortLogicalIfRipIfPoisonReverseFlag | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.4 | INTEGER | read-write | If the value of this attribute is set to true, then poison reverse algorithm is used when sending out the updates otherwise use split horizon only. |
| INT mscVrPpIpPortLogicalIfRipIfFlashUpdateFlag | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.5 | INTEGER | read-write | This attribute when set to true will send updates when updates are received; otherwise RIP will wait till the next update period. |
| INT mscVrPpIpPortLogicalIfRipIfNetworkRouteStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.6 | INTEGER | read-write | This attribute determines what type of network routes will be sent and whether a default route will be generated for this RipInterface. Generated default routes will not go into the routing table, but are sent in the updates going out on the interface. The possible values for this attribute are: naturalNetWithOutDefaultRoute - This value will cause normal RIP network routes to be put in the update. This means that the address of logicalIf pertaining to this RipInterface knowledge is taken into account in determining if the subnetted network or the natural network is sent for any route going into this update. naturalNetWithDefaultRoute - Selecting this value will cause a default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. defaultRouteOnly - Selection of this value causes the default route to be generated with the value of the metric selected for the attribute defaultRouteMetric. NOTE: No other routes will go in the update. subnetsOnly - selection of this value will cause only subnet information to be put in the update. No default routes will be generated or passed on. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be put in the update. NOTE: this also effects receiving of updates on this interface. Only subnetted routes that are part of the same subnetted network that this logicalInterface is on will be accepted on a received RIP update on this RipInterface. |
| U32 mscVrPpIpPortLogicalIfRipIfDefaultRouteMetric | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.7 | Unsigned32 | read-write | This attribute identifies the metric value for the default route. This value is only used if the attribute networkRouteStatus is configured with a value of either naturalNetWithDefaultRoute or defaultRouteOnly |
| INT mscVrPpIpPortLogicalIfRipIfAcceptDefault | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.8 | INTEGER | read-write | If this attribute is set to true, then accept the default route from this interface. |
| INT mscVrPpIpPortLogicalIfRipIfIfConfSend | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.12 | INTEGER | read-write | This attribute identifies what the router sends on this RipIf. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates according to RFC 1058. ripVersion2 implies multicasting RIP-2 updates. |
| INT mscVrPpIpPortLogicalIfRipIfIfConfReceive | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.10.1.13 | INTEGER | read-write | This attribute identifies which version of RIP updates are to be accepted on this RipIf. Note that rip2 and rip1OrRip2 implies reception of multicast packets. |
| mscVrPpIpPortLogicalIfRipIfStatTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.11 | not-accessible | This group contains operational attributes of the RipIf component. These attributes are statistical data corresponding to the RIP-2 standard MIB (rfc 1724) rip2Status table. | |
| mscVrPpIpPortLogicalIfRipIfStatEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.11.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfRipIfStatTable. | |
| U32 mscVrPpIpPortLogicalIfRipIfIfBadPacketRcv | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.11.1.1 | Unsigned32 | read-only | This attribute counts the number of RIP response packets recieved by the RIP process which were subsequently discarded for any reason. |
| U32 mscVrPpIpPortLogicalIfRipIfIfBadRouteRcv | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.11.1.2 | Unsigned32 | read-only | This attribute counts how many routes, in valid RIP packets, were ignored for any reason. |
| U32 mscVrPpIpPortLogicalIfRipIfIfTriggeredUpdates | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.3.11.1.3 | Unsigned32 | read-only | This attribute counts the number of triggered updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information. |
| mscVrPpIpPortLogicalIfProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.10 | not-accessible | This group contains attributes required to define an IpLogicalIf. | |
| mscVrPpIpPortLogicalIfProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.10.1 | not-accessible | An entry in the mscVrPpIpPortLogicalIfProvTable. | |
| IP mscVrPpIpPortLogicalIfNetMask | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.10.1.1 | IpAddress | read-write | This attribute specifies the subnet mask for this IpLogicalIf. This attribute must be specified because the IP application will not automatically provide a default value. |
| IP mscVrPpIpPortLogicalIfBroadcastAddress | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.10.1.2 | IpAddress | read-write | This attribute specifies the broadcast address for this IpLogicalIf. This attribute is ignored if the IpPort mediaType is ppp (Point to Point Protocol). If the value is 0.0.0.0, the actual broadcast address will be derived from the IP address of this LogicalIf and the netmask attribute. |
| IP mscVrPpIpPortLogicalIfLinkDestinationAddress | 1.3.6.1.4.1.562.36.2.1.100.3.5.2.10.1.3 | IpAddress | read-write | This attribute specifies the address for the link destination for this IpLogicalIf. This attribute is only required if the IpPort media type is PPP (Point to Point Protocol). |
| mscVrPpIpPortNs | 1.3.6.1.4.1.562.36.2.1.100.3.5.3 | |||
| mscVrPpIpPortNsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortNs components. | |
| mscVrPpIpPortNsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortNs component. | |
| ROW mscVrPpIpPortNsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortNs components. These components can be added and deleted. |
| STR mscVrPpIpPortNsComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortNsStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortNs tables. |
| NON mscVrPpIpPortNsIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrPpIpPortNs tables. |
| mscVrPpIpPortNsProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.10 | not-accessible | This group contains the attributes required by NetSentry to be applied to all IP packets going through this IpPort. | |
| mscVrPpIpPortNsProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.10.1 | not-accessible | An entry in the mscVrPpIpPortNsProvTable. | |
| STR mscVrPpIpPortNsIncomingFilter | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.10.1.1 | AsciiString | read-write | An ASCII string which provides the name of the NetSentry filter which will be applied to all IP datagrams arriving from this IpPort. |
| STR mscVrPpIpPortNsOutgoingFilter | 1.3.6.1.4.1.562.36.2.1.100.3.5.3.10.1.2 | AsciiString | read-write | An ASCII string which provides the name of NetSentry filter which will be applied to all IP datagrams sent to this IpPort. |
| mscVrPpIpPortBootpP | 1.3.6.1.4.1.562.36.2.1.100.3.5.4 | |||
| mscVrPpIpPortBootpPRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1 | not-accessible | This entry controls the addition and deletion of mscVrPpIpPortBootpP components. | |
| mscVrPpIpPortBootpPRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1.1 | not-accessible | A single entry in the table represents a single mscVrPpIpPortBootpP component. | |
| ROW mscVrPpIpPortBootpPRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrPpIpPortBootpP components. These components can be added and deleted. |
| STR mscVrPpIpPortBootpPComponentName | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrPpIpPortBootpPStorageType | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrPpIpPortBootpP tables. |
| NON mscVrPpIpPortBootpPIndex | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrPpIpPortBootpP tables. |
| mscVrPpIpPortBootpPProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.10 | not-accessible | This group contains provisionable attributes for the BootpPort component. | |
| mscVrPpIpPortBootpPProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.10.1 | not-accessible | An entry in the mscVrPpIpPortBootpPProvTable. | |
| INT mscVrPpIpPortBootpPRelayForwardStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.10.1.2 | INTEGER | read-write | This attribute controls how BOOTP request packets, received on another port, will be flooded out this port. If relayForwardStatus is enabled, BOOTP requests received on another port will be broadcast out this port. When relayForwardStatus is disabled, BOOTP requests will not be broadcast out this port. If auto is used, the bridge spanning tree database is used to determine if BOOTP requests should be broadcast out this port. Note that when using enabled, it is possible to create misconfigurations which will result in broadcast storms. When using this feature with multiple routers, make sure there are no broadcast forwarding loops. Using auto with bridge spanning tree is safer to use if the network is running bridge spanning tree. Note that for auto to have effect, bridge spanning tree must be running on the corresponding VirtualRouter ProtocolPort. |
| IP mscVrPpIpPortBootpPBootpLogicalInterface | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.10.1.3 | IpAddress | read-write | This attribute identifies the logical interface whose address is to be the GIADDR of this BOOTP port. If not set, the address of the first logical port is chosen. |
| mscVrPpIpPortBootpPAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.11 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrPpIpPortBootpPAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.11.1 | not-accessible | An entry in the mscVrPpIpPortBootpPAdminControlTable. | |
| INT mscVrPpIpPortBootpPSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.11.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrPpIpPortBootpPOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.12 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrPpIpPortBootpPOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.12.1 | not-accessible | An entry in the mscVrPpIpPortBootpPOperStatusTable. | |
| INT mscVrPpIpPortBootpPSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.12.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrPpIpPortBootpPStateTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.13 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrPpIpPortBootpPStateEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.13.1 | not-accessible | An entry in the mscVrPpIpPortBootpPStateTable. | |
| INT mscVrPpIpPortBootpPAdminState | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.13.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrPpIpPortBootpPOperationalState | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.13.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrPpIpPortBootpPUsageState | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.13.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrPpIpPortBootpPStatsTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14 | not-accessible | This group contains BootpPortEntry component statistics. | |
| mscVrPpIpPortBootpPStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1 | not-accessible | An entry in the mscVrPpIpPortBootpPStatsTable. | |
| C32 mscVrPpIpPortBootpPInRequests | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.1 | Counter32 | read-only | This attribute counts the total number of BOOTP Request messages received on this port. |
| C32 mscVrPpIpPortBootpPInReplies | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.2 | Counter32 | read-only | This attribute counts the total number of BOOTP Reply messages received on this port. |
| C32 mscVrPpIpPortBootpPOutRequests | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.3 | Counter32 | read-only | This attribute counts total the number of BOOTP Request messages broadcast out on this port. |
| C32 mscVrPpIpPortBootpPOutReplies | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.4 | Counter32 | read-only | This attribute counts the total number of BOOTP Reply messages sent out on this port. |
| C32 mscVrPpIpPortBootpPInRequestErrors | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.5 | Counter32 | read-only | This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded. |
| C32 mscVrPpIpPortBootpPInReplyErrors | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.14.1.6 | Counter32 | read-only | This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP. |
| mscVrPpIpPortBootpPAddrTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.290 | not-accessible | This attribute identifies a list of relay addresses. When a BOOTP request message is received on this port, the request will be forwarded to the IP addresses provisioned in relayAddress. Note that BOOTP requests are also broadcast out all other BootpPort's according to the relayForwardStatus of the outgoing port. | |
| mscVrPpIpPortBootpPAddrEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.290.1 | not-accessible | An entry in the mscVrPpIpPortBootpPAddrTable. | |
| IP mscVrPpIpPortBootpPAddrValue | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.290.1.1 | IpAddress | read-write | This variable represents both the value and the index for the mscVrPpIpPortBootpPAddrTable. |
| ROW mscVrPpIpPortBootpPAddrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.4.290.1.2 | RowStatus | write-only | This variable is used to control the addition and deletion of individual values of the mscVrPpIpPortBootpPAddrTable. |
| mscVrPpIpPortProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.10 | not-accessible | This group contains provisionable attributes for IP ports. | |
| mscVrPpIpPortProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1 | not-accessible | An entry in the mscVrPpIpPortProvTable. | |
| U32 mscVrPpIpPortMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.2 | Unsigned32 | read-write | This attribute specifies the IP MTU (Maximum Transmission Unit) supported by this IpPort. The specified MTU must be within the valid range for the IpPort media type. |
| INT mscVrPpIpPortArpStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.3 | INTEGER | read-write | This attribute specifies whether ARP is enabled or disabled on this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type. |
| INT mscVrPpIpPortProxyArpStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.4 | INTEGER | read-write | This attribute specifies whether Proxy ARP is enabled or disabled for this IpPort. |
| INT mscVrPpIpPortArpNoLearn | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.5 | INTEGER | read-write | This attribute specifies whether or not dynamic host entries will be installed in the ARP table when ARP packets are received on this IpPort. |
| INT mscVrPpIpPortSendRedirect | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.6 | INTEGER | read-write | This attribute specifies whether or not ICMP host redirects will be sent out this IpPort. |
| INT mscVrPpIpPortMulticastStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.7 | INTEGER | read-write | This attribute specifies whether or not IP multicast packets can be sent out this IpPort. If auto is specified, an appropriate value will be selected based on the IpPort media type. |
| IP mscVrPpIpPortRelayAddress | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.8 | IpAddress | read-write | This attribute specifies a relay broadcast address for this IpPort. Each packet, received on this IpPort, meeting the relay broadcast criteria will be forwarded to the specified relay broadcast address. An relay address of all zero's indicates no relay broadcast address. |
| INT mscVrPpIpPortRelayBroadcast | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.9 | INTEGER | read-write | This attribute specifies how packets, received on other IpPorts, meeting the relay broadcast criteria, will be forwarded out this IpPort. The three options are described as follows: enabled: packets will be forwarded out this IpPort. disabled: packets will not be forwarded out this IpPort. auto: packets will be forwarded out this IpPort only when the bridge state is forwarding. |
| INT mscVrPpIpPortLinkModel | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.10 | INTEGER | read-write | This attribute specifies the link model to use when the media type for this IpPort is PPP (Point to Point Protocol). A value of localAreaNetwork causes IP to treat this IpPort like a LAN. A value of pointToPoint causes IP to treat this IpPort like two directly connected IP hosts. |
| INT mscVrPpIpPortLanModel | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.11 | INTEGER | read-write | This attribute specifies the lan model to use for this IpPort. |
| INT mscVrPpIpPortEncap | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.12 | INTEGER | read-write | This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an appropriate value is selected based on the IpPort media type. The values ieee8023 and ethernet can only be specified if the media type is ethernet. Otherwise, auto must be specified. For ethernet media type, the default encapsulation is ethernet. |
| INT mscVrPpIpPortIcmpMaskReply | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.13 | INTEGER | read-write | This attribute specifies whether or not replies will be generated in response to ICMP Address Mask Requests received on this IpPort. |
| INT mscVrPpIpPortDirectedBroadcast | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.14 | INTEGER | read-write | This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on this IpPort. The IP router requirement (RFC1812) says this translation should be enabled; however, in some network environments, setting this attribute to disabled may prevent operational problem such as broadcast storms. Note that in some configuration, setting this attribute to disabled may cause Bootp to fail. |
| U32 mscVrPpIpPortAssignedQos | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.15 | Unsigned32 | read-write | This attribute specifies the initial Class of Service (CoS) given to each packet received on the IpPort. The CoS value n is used to select Vr/ QosP/n. which determines the QualityofService-Profile to be used when the packet is forwarded. The initial CoS given to a packet by the assignedQoS attribute may be overridden under certain circumstances (see the description of the Vr Qosp component, the cosPolicyAssignment attribute on the IpPort and Ip components, and the ipCos attribute on any of the frameRelayDte staticDlci, frameRelayDte dynamicDlciDefaults, and atmMpe atmConnection components). |
| INT mscVrPpIpPortAllowMcastMacDest | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.16 | INTEGER | read-write | This attribute specifies whether a multicast destination MAC address is valid on this IpPort or not. Enabling it is non-standard. It can be used for applications such as transparent server backup. Multicast destination MAC address is only supported on LAN media. |
| LIN mscVrPpIpPortCosPolicyAssignment | 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.17 | Link | read-write | This attribute specifies the CosPolicyGroup component this IpPort component is using. Assigning a particular policy group to the IpPort may override the effect of the assignedQos; this depends on the actual policies provisioned under the policy group. |
| mscVrPpIpPortSresProvTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.11 | not-accessible | This group contains the provisioned attributes for SourceRouteEndStation support. | |
| mscVrPpIpPortSresProvEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.11.1 | not-accessible | An entry in the mscVrPpIpPortSresProvTable. | |
| INT mscVrPpIpPortSourceRouteEndStationSupport | 1.3.6.1.4.1.562.36.2.1.100.3.5.11.1.1 | INTEGER | read-write | This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component. |
| mscVrPpIpPortAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.12 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrPpIpPortAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.12.1 | not-accessible | An entry in the mscVrPpIpPortAdminControlTable. | |
| INT mscVrPpIpPortSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.12.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrPpIpPortOperTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.13 | not-accessible | This group contains operational attributes for an IpPort. | |
| mscVrPpIpPortOperEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1 | not-accessible | An entry in the mscVrPpIpPortOperTable. | |
| INT mscVrPpIpPortMediaType | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.1 | INTEGER | read-only | This attribute indicates the media type of this IpPort. |
| U32 mscVrPpIpPortOperMtu | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.2 | Unsigned32 | read-only | This attribute indicates the current operational IP MTU for this IpPort. Note that this value may be different than the provisioned maxTxUnit. |
| INT mscVrPpIpPortOperArpStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.3 | INTEGER | read-only | This attribute indicates the current operational ARP status. If the provisioned arpStatus is set to auto, then the IP application automatically determines the operArpStatus based on the IpPort media type. |
| INT mscVrPpIpPortOperMulticastStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.4 | INTEGER | read-only | This attribute indicates the current operational Multicast status. If the provisioned multicastStatus is set to auto, then the IP application automatically determines the operMulticastStatus based on the IpPort media type. |
| INT mscVrPpIpPortOperEncap | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.5 | INTEGER | read-only | This attribute indicates the current operational encapsulation type. If the provisioned encap is set to auto, then the IP application automatically determines the operEncap based on the IpPort media type. |
| NUM mscVrPpIpPortOperCosPolicyAssignment | 1.3.6.1.4.1.562.36.2.1.100.3.5.13.1.433 | RowPointer | read-only | This attribute specifies the CosPolicyGroup component this IpPort component is using. |
| mscVrPpIpPortRelayBcOperTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.14 | not-accessible | This group contains operational attributes for an IpPort's RelayBc counters. | |
| mscVrPpIpPortRelayBcOperEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.14.1 | not-accessible | An entry in the mscVrPpIpPortRelayBcOperTable. | |
| C32 mscVrPpIpPortRelayAddressCount | 1.3.6.1.4.1.562.36.2.1.100.3.5.14.1.1 | Counter32 | read-only | This attribute indicates the number of frames received on this IpPort which were forwarded to the provisioned relayAddress for this port. This counter wraps to zero when it reaches it's maximum. |
| C32 mscVrPpIpPortRelayBcCount | 1.3.6.1.4.1.562.36.2.1.100.3.5.14.1.2 | Counter32 | read-only | This attribute indicates the number of frames received on this port which were forwarded to the broadcastAddress on other IpPorts. This counter is incremented once for every frame received on this port regardless of how many other ports it was sent on. This counter wraps to zero when it reaches it's maximum. |
| mscVrPpIpPortStateTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.15 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrPpIpPortStateEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.15.1 | not-accessible | An entry in the mscVrPpIpPortStateTable. | |
| INT mscVrPpIpPortAdminState | 1.3.6.1.4.1.562.36.2.1.100.3.5.15.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrPpIpPortOperationalState | 1.3.6.1.4.1.562.36.2.1.100.3.5.15.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrPpIpPortUsageState | 1.3.6.1.4.1.562.36.2.1.100.3.5.15.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrPpIpPortOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.3.5.16 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrPpIpPortOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.3.5.16.1 | not-accessible | An entry in the mscVrPpIpPortOperStatusTable. | |
| INT mscVrPpIpPortSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.3.5.16.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIp | 1.3.6.1.4.1.562.36.2.1.100.6 | |||
| mscVrIpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.1 | not-accessible | This entry controls the addition and deletion of mscVrIp components. | |
| mscVrIpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.1.1 | not-accessible | A single entry in the table represents a single mscVrIp component. | |
| ROW mscVrIpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIp components. These components can be added and deleted. |
| STR mscVrIpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIp tables. |
| NON mscVrIpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIp tables. |
| mscVrIpFwd | 1.3.6.1.4.1.562.36.2.1.100.6.3 | |||
| mscVrIpFwdRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpFwd components. | |
| mscVrIpFwdRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpFwd component. | |
| ROW mscVrIpFwdRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpFwd components. These components cannot be added nor deleted. |
| STR mscVrIpFwdComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpFwdStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpFwd tables. |
| IP mscVrIpFwdDestAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpFwd tables. |
| IP mscVrIpFwdDestMaskIndex | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpFwd tables. |
| I32 mscVrIpFwdTypeOfServiceIndex | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.12 | Integer32 | not-accessible | This variable represents an index for the mscVrIpFwd tables. |
| IP mscVrIpFwdGatewayIndex | 1.3.6.1.4.1.562.36.2.1.100.6.3.1.1.13 | IpAddress | not-accessible | This variable represents an index for the mscVrIpFwd tables. |
| mscVrIpFwdOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.3.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Forward Table. | |
| mscVrIpFwdOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1 | not-accessible | An entry in the mscVrIpFwdOperTable. | |
| NUM mscVrIpFwdIfIndex | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.1 | InterfaceIndex | read-only | This attribute specifies the SNMP index associated with the protocol port represented by the attribute protocolPortName, which identifies the local interface through which the next hop of this route should be reached. |
| INT mscVrIpFwdType | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.2 | INTEGER | read-only | Specifies the type of the route, |
| INT mscVrIpFwdProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.3 | INTEGER | read-only | This Attribute identifies the routing mechanism by which this route was learned. |
| G32 mscVrIpFwdAge | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.4 | Gauge32 | read-only | This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct. |
| NUM mscVrIpFwdProtocolPortName | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.5 | RowPointer | read-only | Indicates the name of the protocol port by which the next hop of this route should be reached. |
| U32 mscVrIpFwdNextHopAs | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.7 | Unsigned32 | read-only | This attribute specifies the Autonomous System number of the Next Hop. If unknown or not relevant to the protocol indicated by the attribute protocol, the value should be zero. |
| INT mscVrIpFwdMetric | 1.3.6.1.4.1.562.36.2.1.100.6.3.10.1.8 | INTEGER | read-only | This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the attribute protocol. If this metric is not used, its value should be set to -1. |
| mscVrIpRdb | 1.3.6.1.4.1.562.36.2.1.100.6.4 | |||
| mscVrIpRdbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.4.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpRdb components. | |
| mscVrIpRdbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRdb component. | |
| ROW mscVrIpRdbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpRdb components. These components cannot be added nor deleted. |
| STR mscVrIpRdbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRdbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRdb tables. |
| IP mscVrIpRdbDestAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpRdb tables. |
| IP mscVrIpRdbDestMaskIndex | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpRdb tables. |
| INT mscVrIpRdbProtocolIndex | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.12 | INTEGER | not-accessible | This variable represents an index for the mscVrIpRdb tables. |
| IP mscVrIpRdbGatewayIndex | 1.3.6.1.4.1.562.36.2.1.100.6.4.1.1.13 | IpAddress | not-accessible | This variable represents an index for the mscVrIpRdb tables. |
| mscVrIpRdbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.4.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the routing database. | |
| mscVrIpRdbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.4.10.1 | not-accessible | An entry in the mscVrIpRdbOperTable. | |
| INT mscVrIpRdbMetric | 1.3.6.1.4.1.562.36.2.1.100.6.4.10.1.1 | INTEGER | read-only | This attribute specifies the primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified by the value of the index to this entry protocol. If this metric is not used, its value should be set to -1. |
| U32 mscVrIpRdbPreference | 1.3.6.1.4.1.562.36.2.1.100.6.4.10.1.2 | Unsigned32 | read-only | This attribute specifies the the preference value of this particular entry. The value of this attribute affects the way the routeEntries in this database are selected for installing it in the forwardingTable. The lower the preference value of this entry, the higher are the chances that this entry will be selected to install in the ForwardTable. |
| G32 mscVrIpRdbAge | 1.3.6.1.4.1.562.36.2.1.100.6.4.10.1.3 | Gauge32 | read-only | This attribute specifies the number of seconds since this route was last updated or otherwise determined to be correct. |
| mscVrIpIf | 1.3.6.1.4.1.562.36.2.1.100.6.5 | |||
| mscVrIpIfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.5.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpIf components. | |
| mscVrIpIfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.5.1.1 | not-accessible | A single entry in the table represents a single mscVrIpIf component. | |
| ROW mscVrIpIfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.5.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpIf components. These components cannot be added nor deleted. |
| STR mscVrIpIfComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpIfStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpIf tables. |
| IP mscVrIpIfInterfaceAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.5.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpIf tables. |
| mscVrIpIfOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.5.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Identifies a group of operational attributes associated with each entry in the Ip interface table. | |
| mscVrIpIfOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1 | not-accessible | An entry in the mscVrIpIfOperTable. | |
| IP mscVrIpIfInterfaceMask | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.1 | IpAddress | read-only | This attribute indicates the mask for this interface entry. |
| INT mscVrIpIfStatus | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.2 | INTEGER | read-only | This attribute specifies the status of the provisioned Ip logicalInterface entry. A value of disabled is used when the parent components Vr, Ip or ipPort is in a disabled state. A value of up is used when the interface is in an operational state. A state of down is used if the media associated with this interface is not ready or disabled. |
| STR mscVrIpIfPPName | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.3 | AsciiString | read-only | Indicates the name of the protocol port this logicalIfEntry belongs to. |
| INT mscVrIpIfMediaType | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.4 | INTEGER | read-only | This attribute indicates the media type of interface. When the interface is down, a value of none indicates the media stays down from the beginning. When the interface is down, a value of some valid media type indicates the media is brought down after it was up. Otherwise, when the interface is up or disabled, this attribute should reflect the proper media type of the interface. |
| STR mscVrIpIfHardwareAddress | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.5 | DashedHexString | read-only | This attribute specifies the hardware address of the media in canonical form if applicable. The non-canonical version of this address is indicated in ncHardwareAddress. |
| U32 mscVrIpIfMtu | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.6 | Unsigned32 | read-only | This attribute specifies the maximum transmission unit applicable for this logicalInterface. A value of 0 is used for the interfaces where all the necessary information is not available to compute the mtu applicable for this interface. |
| IP mscVrIpIfBroadcastAddress | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.7 | IpAddress | read-only | This attribute indicates the destination IP address to be used by any application which needs to broadcast on this interface. The value is determined by the corresponding LogicalIf component's broadcastAddress attribute. |
| STR mscVrIpIfNcHardwareAddress | 1.3.6.1.4.1.562.36.2.1.100.6.5.10.1.8 | DashedHexString | read-only | This attribute is the non-canonical version of hardwareAddress. This attribute is not displayed for interfaces on non-LAN media. |
| mscVrIpEgp | 1.3.6.1.4.1.562.36.2.1.100.6.6 | |||
| mscVrIpEgpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgp components. | |
| mscVrIpEgpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgp component. | |
| ROW mscVrIpEgpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgp components. These components can be added and deleted. |
| STR mscVrIpEgpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgp tables. |
| NON mscVrIpEgpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpEgp tables. |
| mscVrIpEgpNbr | 1.3.6.1.4.1.562.36.2.1.100.6.6.2 | |||
| mscVrIpEgpNbrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgpNbr components. | |
| mscVrIpEgpNbrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgpNbr component. | |
| ROW mscVrIpEgpNbrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgpNbr components. These components can be added and deleted. |
| STR mscVrIpEgpNbrComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpNbrStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgpNbr tables. |
| IP mscVrIpEgpNbrNeighborAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpEgpNbr tables. |
| mscVrIpEgpNbrProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10 | not-accessible | This group of attributes identify the provisionable attributes for this EGP neighbor. | |
| mscVrIpEgpNbrProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1 | not-accessible | An entry in the mscVrIpEgpNbrProvTable. | |
| U32 mscVrIpEgpNbrAsId | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.1 | Unsigned32 | read-write | The autonomous system identifier of this EGP peer. The value of this neighbor's asId should not be equal to the asId value of Egp entity |
| INT mscVrIpEgpNbrMode | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.2 | INTEGER | read-write | This attribute will indicate whether this neighbor is being configured as an active or passive neighbor. |
| INT mscVrIpEgpNbrGenerateDefaultRoute | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.3 | INTEGER | read-write | This attribute distinguishes whether or not the default route should be generated. This route is put in the EGP update along with the normal EGP update routes when updates are sent to this EGP neighbor |
| U32 mscVrIpEgpNbrDefaultRouteMetric | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.4 | Unsigned32 | read-write | This attribute identifies the Metric to be used for propagating the 'Default Route'. The value of defaultRouteMetric is used only in the case where the value of the attribute generateDefaultRoute is set to yes. |
| U32 mscVrIpEgpNbrDefaultMetric | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.5 | Unsigned32 | read-write | This attribute identifies the default metric value for routes that are exported to this EgpNeighbor. This value is used when exporting routes to this neighbor and no Export policy applies a different metric. |
| U32 mscVrIpEgpNbrHelloInterval | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.6 | Unsigned32 | read-write | This attribute identifies the interval in seconds, between EGP hello command retransmissions. This is the P1 timer in the RFC904. This value may change in operation due to negotiations. |
| U32 mscVrIpEgpNbrPollInterval | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.10.1.7 | Unsigned32 | read-write | This attribute identifies the interval in seconds, between EGP poll command retransmissions. This is the P2 timer in the RFC904. This value may change in operation due to negotiations. |
| mscVrIpEgpNbrOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11 | not-accessible | This group of attributes identifies the operational set of attributes for the NeighborEntry component. | |
| mscVrIpEgpNbrOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1 | not-accessible | An entry in the mscVrIpEgpNbrOperTable. | |
| INT mscVrIpEgpNbrState | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.1 | INTEGER | read-only | This attribute describes the state of the local system with respect to this entry's EGP Neighbor. |
| C32 mscVrIpEgpNbrInMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.2 | Counter32 | read-only | The number of EGP messages received without error from the EGP peer. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.3 | Counter32 | read-only | The number of messages received from this EGP peer that proved to be in error. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrOutMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.4 | Counter32 | read-only | The number of locally generated EGP messages for this EGP peer. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrOutErrors | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.5 | Counter32 | read-only | The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrInErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.6 | Counter32 | read-only | The number of EGP-defined error messages received from this EGP peer.This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrOutErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.7 | Counter32 | read-only | The number of EGP-defined error messages sent to this EGP peer.This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrStateUps | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.8 | Counter32 | read-only | The number of EGP state transitions to the UP state with this EGP peer. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpNbrStateDowns | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.9 | Counter32 | read-only | The number of EGP state transitions from the UP state to any other state with this EGP peer. This counter will wraparound once the value reaches the maximum value. |
| INT mscVrIpEgpNbrEventTrigger | 1.3.6.1.4.1.562.36.2.1.100.6.6.2.11.1.10 | INTEGER | read-only | This attribute is used to control the state of the Neighbor. It is not allowed to change. This attribute from SNMP perspective deviates from MIB that it is made READONLY. |
| mscVrIpEgpImport | 1.3.6.1.4.1.562.36.2.1.100.6.6.3 | |||
| mscVrIpEgpImportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgpImport components. | |
| mscVrIpEgpImportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgpImport component. | |
| ROW mscVrIpEgpImportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgpImport components. These components can be added and deleted. |
| STR mscVrIpEgpImportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpImportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgpImport tables. |
| I32 mscVrIpEgpImportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpEgpImport tables. |
| mscVrIpEgpImportNet | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2 | |||
| mscVrIpEgpImportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgpImportNet components. | |
| mscVrIpEgpImportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgpImportNet component. | |
| ROW mscVrIpEgpImportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgpImportNet components. These components can be added and deleted. |
| STR mscVrIpEgpImportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpImportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgpImportNet tables. |
| I32 mscVrIpEgpImportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpEgpImportNet tables. |
| mscVrIpEgpImportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.10 | not-accessible | This group identifies attributes for the NetworkList component for which the import policy will be applied to | |
| mscVrIpEgpImportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.10.1 | not-accessible | An entry in the mscVrIpEgpImportNetProvTable. | |
| IP mscVrIpEgpImportNetIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.2.10.1.1 | IpAddress | read-write | This attribute identifies the IP address that needs to be matched against in this network list for the Import policy to be applied to. |
| mscVrIpEgpImportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.10 | not-accessible | These set of attributes describe the provisionable attributes for the import component. | |
| mscVrIpEgpImportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.10.1 | not-accessible | An entry in the mscVrIpEgpImportProvTable. | |
| INT mscVrIpEgpImportUsageFlag | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.10.1.1 | INTEGER | read-write | This flag will determine whether or not EGP will use or ignore information in updates received. If the attribute nbrAsId is not specified or any of the NetworkList components are not added, then this attribute when set to ignore will ignore all incoming information. |
| U32 mscVrIpEgpImportImportMetric | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.10.1.2 | Unsigned32 | read-write | This attribute is used to set the metric value to be included in the routing table for any routes sent because this particular import instance was it's 'best match' policy. However this attribute is not a selection key. It should not use or ignore a particular metric value. If the value for this attribute is not specified, then the metric value received in an Egp update will be used. Note: When setting this value, caution should be taken to set the metric value in all relevant Import components to make sure that all matching policies for a given route have the same metric set. This will insure that there are no situations where a specific metric was desired, but doesn't get used in the update because the 'best match' policy for that situation did not set the metric parameter. If the attribute usageFlag for this import policy is set to ignore, then the importMetric value will be ignored by the application. The importMetric value is not used to select which routes to use or ignore but is used to set the metric value for the routes being imported. A value of zero indicates that the metric received in the update will be used. |
| U32 mscVrIpEgpImportNbrAsId | 1.3.6.1.4.1.562.36.2.1.100.6.6.3.10.1.3 | Unsigned32 | read-write | The autonomous system Id this import policy will apply to. Note: The Valid value of an asId is from 1 to 65,535. This attribute's value when set to 0 will be ignored. |
| mscVrIpEgpExport | 1.3.6.1.4.1.562.36.2.1.100.6.6.4 | |||
| mscVrIpEgpExportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgpExport components. | |
| mscVrIpEgpExportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgpExport component. | |
| ROW mscVrIpEgpExportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgpExport components. These components can be added and deleted. |
| STR mscVrIpEgpExportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpExportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgpExport tables. |
| I32 mscVrIpEgpExportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpEgpExport tables. |
| mscVrIpEgpExportNet | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2 | |||
| mscVrIpEgpExportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpEgpExportNet components. | |
| mscVrIpEgpExportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpEgpExportNet component. | |
| ROW mscVrIpEgpExportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpEgpExportNet components. These components can be added and deleted. |
| STR mscVrIpEgpExportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpEgpExportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpEgpExportNet tables. |
| I32 mscVrIpEgpExportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpEgpExportNet tables. |
| mscVrIpEgpExportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.10 | not-accessible | This group identifies the set of provisionable attributes for the ExportNetworkList component. | |
| mscVrIpEgpExportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.10.1 | not-accessible | An entry in the mscVrIpEgpExportNetProvTable. | |
| IP mscVrIpEgpExportNetIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.2.10.1.1 | IpAddress | read-write | This attribute identifies the 32 bit IP address to match against. |
| mscVrIpEgpExportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10 | not-accessible | This group contains all the provisioned attributes for the Export component. | |
| mscVrIpEgpExportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1 | not-accessible | An entry in the mscVrIpEgpExportProvTable. | |
| INT mscVrIpEgpExportAdvertiseStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.1 | INTEGER | read-write | This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block). |
| U32 mscVrIpEgpExportExportMetric | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.2 | Unsigned32 | read-write | This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used. |
| INT mscVrIpEgpExportProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.3 | INTEGER | read-write | This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table. |
| IP mscVrIpEgpExportRipInterface | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.4 | IpAddress | read-write | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. |
| IP mscVrIpEgpExportRipNeighbor | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.5 | IpAddress | read-write | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor. |
| U32 mscVrIpEgpExportInEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.6 | Unsigned32 | read-write | This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router. |
| U32 mscVrIpEgpExportOspfTag | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.7 | Unsigned32 | read-write | This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The value of 4294967295 implies any tag. |
| U32 mscVrIpEgpExportOutAutonomousSystem | 1.3.6.1.4.1.562.36.2.1.100.6.6.4.10.1.8 | Unsigned32 | read-write | This attribute specifies the EGP autonomous system to which routes are exported to as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outAutonomousSystem is ignored. The outAutonomousSystem value is not used to select which routes to block or send but where to export the routes. A value of 0 indicates that the routes are exported to all EGP autonomous systems of which the virtual router is a neighbor. Otherwise, the value of this attribute must match the asId of an EGP neighbor on the same virtual router. |
| mscVrIpEgpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.10 | not-accessible | This group contains the provisionable attributes for the EGP component | |
| mscVrIpEgpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1 | not-accessible | An entry in the mscVrIpEgpProvTable. | |
| U32 mscVrIpEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1.2 | Unsigned32 | read-write | The autonomous system identifier for this EGP entity. The value of this asId can not be equal to the value of EgpNeighborEntry asId. |
| U32 mscVrIpEgpDefaultHelloInterval | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1.3 | Unsigned32 | read-write | This attribute is used to configure the default hello interval for each neighbor. This attribute's value is used by the application for each EgpNeighbor whose helloInterval has not been set. |
| U32 mscVrIpEgpDefaultPollInterval | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1.4 | Unsigned32 | read-write | This attribute is used to configure the default polling interval for the EGP Neighbor. This attribute's value is used by the application for each EgpNeighbor whose pollInterval has not been set. |
| U32 mscVrIpEgpMaxNatNets | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1.5 | Unsigned32 | read-write | This attribute is used to configure the maximum number of external natural networks this virtual router will be advertising via EGP. |
| U32 mscVrIpEgpMaxBufferSize | 1.3.6.1.4.1.562.36.2.1.100.6.6.10.1.6 | Unsigned32 | read-write | This attribute specifies the maximum buffer size (in 1024 byte memory blocks) to be used for an EGP update to be sent. |
| mscVrIpEgpStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.11 | not-accessible | These set of attributes identifies the statistics for the EGP component. | |
| mscVrIpEgpStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1 | not-accessible | An entry in the mscVrIpEgpStatsTable. | |
| C32 mscVrIpEgpInMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.1 | Counter32 | read-only | Identifies the number of EGP messages received without error. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpInErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.2 | Counter32 | read-only | Identifies the sum of EGP error messages from all the neighbors. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpOutErrorMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.3 | Counter32 | read-only | Indicates the sum of Egp error messages sent to all the neighbors. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.4 | Counter32 | read-only | Identifies the number of EGP messages that proved to be in error. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpOutMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.5 | Counter32 | read-only | The total number of locally generated EGP messages. This counter will wraparound once the value reaches the maximum value. |
| C32 mscVrIpEgpOutErrors | 1.3.6.1.4.1.562.36.2.1.100.6.6.11.1.6 | Counter32 | read-only | The number of EGP messages that were locally generated but were not sent out due to resource limitations within an EGP entity.This counter will wraparound once the value reaches the maximum value. |
| mscVrIpEgpStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.12 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpEgpStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.12.1 | not-accessible | An entry in the mscVrIpEgpStateTable. | |
| INT mscVrIpEgpAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.6.12.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpEgpOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.6.12.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpEgpUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.6.12.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpEgpAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.13 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrIpEgpAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.13.1 | not-accessible | An entry in the mscVrIpEgpAdminControlTable. | |
| INT mscVrIpEgpSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.13.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrIpEgpOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.6.16 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpEgpOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.6.16.1 | not-accessible | An entry in the mscVrIpEgpOperStatusTable. | |
| INT mscVrIpEgpSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.6.16.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIpOspf | 1.3.6.1.4.1.562.36.2.1.100.6.7 | |||
| mscVrIpOspfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspf components. | |
| mscVrIpOspfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspf component. | |
| ROW mscVrIpOspfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspf components. These components can be added and deleted. |
| STR mscVrIpOspfComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspf tables. |
| NON mscVrIpOspfIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpOspf tables. |
| mscVrIpOspfArea | 1.3.6.1.4.1.562.36.2.1.100.6.7.2 | |||
| mscVrIpOspfAreaRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfArea components. | |
| mscVrIpOspfAreaRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfArea component. | |
| ROW mscVrIpOspfAreaRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfArea components. These components can be added and deleted. |
| STR mscVrIpOspfAreaComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfAreaStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfArea tables. |
| IP mscVrIpOspfAreaAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpOspfArea tables. |
| mscVrIpOspfAreaProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.10 | not-accessible | This group describes the set of provisionable attributes for the AreaEntry Component. | |
| mscVrIpOspfAreaProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.10.1 | not-accessible | An entry in the mscVrIpOspfAreaProvTable. | |
| INT mscVrIpOspfAreaAuthType | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.10.1.1 | INTEGER | read-write | The authentication type specified for this area. |
| INT mscVrIpOspfAreaImportAsExtern | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.10.1.2 | INTEGER | read-write | The area's support for importing AS external link-state advertisements. For backbone area (that is, areaId 0.0.0.0), this attribute must be set to importExternal. |
| INT mscVrIpOspfAreaAreaSummary | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.10.1.3 | INTEGER | read-write | This variable controls the import of summary LSAs into stub areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub areas. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs. |
| mscVrIpOspfAreaOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11 | not-accessible | This group of attributes describes the Operational set of attributes for the AreaEntry component. | |
| mscVrIpOspfAreaOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1 | not-accessible | An entry in the mscVrIpOspfAreaOperTable. | |
| C32 mscVrIpOspfAreaSpfRuns | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1.1 | Counter32 | read-only | The number of times that the intra-area route table has been calculated using this area's link-state database since the protocol became operational. |
| G32 mscVrIpOspfAreaAreaBdrRtrCount | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1.2 | Gauge32 | read-only | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass. |
| G32 mscVrIpOspfAreaAsBdrRtrCount | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1.3 | Gauge32 | read-only | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First Pass. |
| G32 mscVrIpOspfAreaLsaCount | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1.4 | Gauge32 | read-only | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| U32 mscVrIpOspfAreaAreaLsaCksumSum | 1.3.6.1.4.1.562.36.2.1.100.6.7.2.11.1.5 | Unsigned32 | read-only | The 32-bit unsigned sum of the link-state advertisement's LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| mscVrIpOspfStub | 1.3.6.1.4.1.562.36.2.1.100.6.7.3 | |||
| mscVrIpOspfStubRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfStub components. | |
| mscVrIpOspfStubRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfStub component. | |
| ROW mscVrIpOspfStubRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfStub components. These components can be added and deleted. |
| STR mscVrIpOspfStubComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfStubStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfStub tables. |
| IP mscVrIpOspfStubAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfStub tables. |
| I32 mscVrIpOspfStubTosIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpOspfStub tables. |
| mscVrIpOspfStubProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.10 | not-accessible | These set of attributes explain the provisionable group for the StubAreaEntry. | |
| mscVrIpOspfStubProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.10.1 | not-accessible | An entry in the mscVrIpOspfStubProvTable. | |
| U32 mscVrIpOspfStubMetric | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.10.1.1 | Unsigned32 | read-write | The metric value applied at the indicated type of service. |
| INT mscVrIpOspfStubMetricType | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.10.1.2 | INTEGER | read-write | This type of the metric advertised as a default route. |
| INT mscVrIpOspfStubAdvertiseDefault | 1.3.6.1.4.1.562.36.2.1.100.6.7.3.10.1.3 | INTEGER | read-write | This attribute determines whether or not the default routing information will be advertised, depending on other criterion. Setting this value to no can prevent advertising default routing information. If the value of the attribute is set to yes, then the value of the attribute importAsExtern for that particular AreaEntry should be set to importNssa. |
| mscVrIpOspfAggregate | 1.3.6.1.4.1.562.36.2.1.100.6.7.5 | |||
| mscVrIpOspfAggregateRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfAggregate components. | |
| mscVrIpOspfAggregateRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfAggregate component. | |
| ROW mscVrIpOspfAggregateRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfAggregate components. These components can be added and deleted. |
| STR mscVrIpOspfAggregateComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfAggregateStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfAggregate tables. |
| IP mscVrIpOspfAggregateAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfAggregate tables. |
| INT mscVrIpOspfAggregateLsdbTypeIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.11 | INTEGER | not-accessible | This variable represents an index for the mscVrIpOspfAggregate tables. |
| IP mscVrIpOspfAggregateAggregateNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfAggregate tables. |
| IP mscVrIpOspfAggregateAggregateMaskIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.1.1.13 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfAggregate tables. |
| mscVrIpOspfAggregateProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.10 | not-accessible | Identifies a group of provisionable attributes. | |
| mscVrIpOspfAggregateProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.10.1 | not-accessible | An entry in the mscVrIpOspfAggregateProvTable. | |
| INT mscVrIpOspfAggregateEffect | 1.3.6.1.4.1.562.36.2.1.100.6.7.5.10.1.1 | INTEGER | read-write | This attribute determines whether or not the routing information will be advertised, depending on other criterion. Setting this value to doNotAdvertiseMatching can prevent advertising routing information for the address and mask values specified as the indices for this entry. |
| mscVrIpOspfHost | 1.3.6.1.4.1.562.36.2.1.100.6.7.6 | |||
| mscVrIpOspfHostRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfHost components. | |
| mscVrIpOspfHostRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfHost component. | |
| ROW mscVrIpOspfHostRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfHost components. These components can be added and deleted. |
| STR mscVrIpOspfHostComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfHostStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfHost tables. |
| IP mscVrIpOspfHostAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfHost tables. |
| I32 mscVrIpOspfHostTosIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpOspfHost tables. |
| mscVrIpOspfHostProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.10 | not-accessible | Provisionable set of attributes for the Host entry. | |
| mscVrIpOspfHostProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.10.1 | not-accessible | An entry in the mscVrIpOspfHostProvTable. | |
| ARE mscVrIpOspfHostAreaId | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.10.1.1 | AreaID | read-write | This is an Ip address for the Host Entry that indicates the area it belongs to. |
| U32 mscVrIpOspfHostMetric | 1.3.6.1.4.1.562.36.2.1.100.6.7.6.10.1.2 | Unsigned32 | read-write | The metric to be advertised. |
| mscVrIpOspfVirtIf | 1.3.6.1.4.1.562.36.2.1.100.6.7.7 | |||
| mscVrIpOspfVirtIfRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfVirtIf components. | |
| mscVrIpOspfVirtIfRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfVirtIf component. | |
| ROW mscVrIpOspfVirtIfRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfVirtIf components. These components can be added and deleted. |
| STR mscVrIpOspfVirtIfComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfVirtIfStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfVirtIf tables. |
| IP mscVrIpOspfVirtIfAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfVirtIf tables. |
| IP mscVrIpOspfVirtIfNbrRouterIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfVirtIf tables. |
| mscVrIpOspfVirtIfProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10 | not-accessible | This group of attributes provide provisioning data for the VirtIfEntry. | |
| mscVrIpOspfVirtIfProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1 | not-accessible | An entry in the mscVrIpOspfVirtIfProvTable. | |
| U32 mscVrIpOspfVirtIfTransitDelay | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1.1 | Unsigned32 | read-write | The estimated number of seconds it takes to transmit a link-state update packet over this interface. |
| U32 mscVrIpOspfVirtIfRetransInterval | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1.2 | Unsigned32 | read-write | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value would be well over the expected round-trip time. |
| U32 mscVrIpOspfVirtIfHelloInterval | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1.3 | Unsigned32 | read-write | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| U32 mscVrIpOspfVirtIfRtrDeadInterval | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1.4 | Unsigned32 | read-write | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. |
| STR mscVrIpOspfVirtIfAuthKey | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.10.1.5 | HexString | write-only | If authentication type is simple password, the password for this virtual circuit. If the value of the attribute is not set, then this attribute is ignored by the application. If the value of this attribute is set, then the value of the attribute authType under this particular Area should be set to simplePassword, otherwise the application will ignore this authentication key. |
| mscVrIpOspfVirtIfOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.11 | not-accessible | Represents a group of operational attributes for the VirtIfEntry component. | |
| mscVrIpOspfVirtIfOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.11.1 | not-accessible | An entry in the mscVrIpOspfVirtIfOperTable. | |
| INT mscVrIpOspfVirtIfState | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.11.1.1 | INTEGER | read-only | The state of the OSPF virtual interface. |
| C32 mscVrIpOspfVirtIfEvents | 1.3.6.1.4.1.562.36.2.1.100.6.7.7.11.1.2 | Counter32 | read-only | The number of state changes or error events on the virtual link. |
| mscVrIpOspfExport | 1.3.6.1.4.1.562.36.2.1.100.6.7.8 | |||
| mscVrIpOspfExportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfExport components. | |
| mscVrIpOspfExportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfExport component. | |
| ROW mscVrIpOspfExportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfExport components. These components can be added and deleted. |
| STR mscVrIpOspfExportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfExportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfExport tables. |
| I32 mscVrIpOspfExportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpOspfExport tables. |
| mscVrIpOspfExportNetList | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2 | |||
| mscVrIpOspfExportNetListRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpOspfExportNetList components. | |
| mscVrIpOspfExportNetListRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfExportNetList component. | |
| ROW mscVrIpOspfExportNetListRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpOspfExportNetList components. These components can be added and deleted. |
| STR mscVrIpOspfExportNetListComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfExportNetListStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfExportNetList tables. |
| I32 mscVrIpOspfExportNetListIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpOspfExportNetList tables. |
| mscVrIpOspfExportNetListProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.10 | not-accessible | This group identifies the set of provisionable attributes for the ExportNetworkList component. | |
| mscVrIpOspfExportNetListProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.10.1 | not-accessible | An entry in the mscVrIpOspfExportNetListProvTable. | |
| IP mscVrIpOspfExportNetListIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.10.1.1 | IpAddress | read-write | This attribute identifies the 32 bit IP address to match against. |
| IP mscVrIpOspfExportNetListIpMask | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.2.10.1.2 | IpAddress | read-write | This attribute is the IP Mask to be used with the IP Address to match against. |
| mscVrIpOspfExportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10 | not-accessible | This Group contains all the Provisioned attributes for the Export Component. | |
| mscVrIpOspfExportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1 | not-accessible | An entry in the mscVrIpOspfExportProvTable. | |
| INT mscVrIpOspfExportAdvertiseStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.1 | INTEGER | read-write | This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block). |
| INT mscVrIpOspfExportMetric | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.2 | INTEGER | read-write | This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of metric is ignored. The metric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of -1 indicates that the metric associated with the route in the forwarding table is used. |
| INT mscVrIpOspfExportProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.3 | INTEGER | read-write | This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes in the forwarding table except internal BGP routes. |
| IP mscVrIpOspfExportRipInterface | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.4 | IpAddress | read-write | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. |
| IP mscVrIpOspfExportRipNeighbor | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.5 | IpAddress | read-write | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP neighbor of which the routes are learned from. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP neighbor. |
| U32 mscVrIpOspfExportEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.6 | Unsigned32 | read-write | This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router. |
| U32 mscVrIpOspfExportTag | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.7 | Unsigned32 | read-write | This attribute specifies the OSPF tag to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of tag is ignored. The tag value is not used to select which routes to block or send, but rather the tag value advertised for the routes. A value of 4294967295 indicates that the tag associated with the route in the forwarding table is used. |
| INT mscVrIpOspfExportExtLsaMetricType | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.8 | INTEGER | read-write | This attribute specifies the metric type in the OSPF external link state advertisement of the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of extLsaMetricType is ignored. The extLsaMetricType value is not used to select which routes to block or send, but rather the metric value advertised for the routes. The value useProtocolDefault indicates the metric type is automatically chosen based on the routing protocol which the route was learned from. |
| U32 mscVrIpOspfExportBgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.9 | Unsigned32 | read-write | This key attribute specifies the bgp AS from which a bgp route is learned from. This key is used only if the protocol is bgpExternal. bgpAsId of value 0 mathces all ASs. |
| IP mscVrIpOspfExportBgpPeerIp | 1.3.6.1.4.1.562.36.2.1.100.6.7.8.10.1.10 | IpAddress | read-write | This key attribute specifies the bgp peer where the routes were learned from. bgpPeerIp of 0 matches all bgp peers. This attribute is used as a key when protocol is set to bgpInternal or bgpExternal. |
| mscVrIpOspfVirtNbr | 1.3.6.1.4.1.562.36.2.1.100.6.7.9 | |||
| mscVrIpOspfVirtNbrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpOspfVirtNbr components. | |
| mscVrIpOspfVirtNbrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfVirtNbr component. | |
| ROW mscVrIpOspfVirtNbrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpOspfVirtNbr components. These components cannot be added nor deleted. |
| STR mscVrIpOspfVirtNbrComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfVirtNbrStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfVirtNbr tables. |
| IP mscVrIpOspfVirtNbrAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfVirtNbr tables. |
| IP mscVrIpOspfVirtNbrNbrRouterIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfVirtNbr tables. |
| mscVrIpOspfVirtNbrOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies a set of operational attributes. | |
| mscVrIpOspfVirtNbrOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1 | not-accessible | An entry in the mscVrIpOspfVirtNbrOperTable. | |
| IP mscVrIpOspfVirtNbrNbrIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.1 | IpAddress | read-only | Indicates the Ip address this interface this virtual neighbor is using. |
| U32 mscVrIpOspfVirtNbrOptions | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.2 | Unsigned32 | read-only | A bit mask corresponding to the neighbor's options field. Bit 1, if set indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing. |
| INT mscVrIpOspfVirtNbrState | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.3 | INTEGER | read-only | The state of the virtual neighbor relationship. |
| C32 mscVrIpOspfVirtNbrEvents | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.4 | Counter32 | read-only | The number of times this virtual link has changed its state, or an error has occurred. |
| G32 mscVrIpOspfVirtNbrLsRetransQlen | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.5 | Gauge32 | read-only | The current length of the Retransmission queue. |
| INT mscVrIpOspfVirtNbrExchangeStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.9.10.1.6 | INTEGER | read-only | Indicates the exchange status of the entry in this table. |
| mscVrIpOspfNbr | 1.3.6.1.4.1.562.36.2.1.100.6.7.10 | |||
| mscVrIpOspfNbrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpOspfNbr components. | |
| mscVrIpOspfNbrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfNbr component. | |
| ROW mscVrIpOspfNbrRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpOspfNbr components. These components cannot be added nor deleted. |
| STR mscVrIpOspfNbrComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfNbrStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfNbr tables. |
| IP mscVrIpOspfNbrAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfNbr tables. |
| I32 mscVrIpOspfNbrAddressLessIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpOspfNbr tables. |
| mscVrIpOspfNbrOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group identifies the operational set of attributes for the NeighborEntry. | |
| mscVrIpOspfNbrOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1 | not-accessible | An entry in the mscVrIpOspfNbrOperTable. | |
| IP mscVrIpOspfNbrRtrId | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.1 | IpAddress | read-only | An Ip Address that uniquely identifies the neighboring router in the autonomous system. |
| U32 mscVrIpOspfNbrOptions | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.2 | Unsigned32 | read-only | A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information, if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; i.e., that it implements OSPF Multicast Routing. |
| U32 mscVrIpOspfNbrPriority | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.3 | Unsigned32 | read-only | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. |
| INT mscVrIpOspfNbrState | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.4 | INTEGER | read-only | The state of the relationship with this neighbor. |
| C32 mscVrIpOspfNbrEvents | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.5 | Counter32 | read-only | The number of times this neighbor relationship has changed state, or an error has occurred. |
| G32 mscVrIpOspfNbrLsRetransQlen | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.6 | Gauge32 | read-only | The current length of the Retransmission queue. |
| INT mscVrIpOspfNbrNbmaNbrStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.7 | INTEGER | read-only | This attribute describes the status of the entry. |
| INT mscVrIpOspfNbrExchangeStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.8 | INTEGER | read-only | Indicates the exchange status for a neighbor entry. |
| INT mscVrIpOspfNbrPermanence | 1.3.6.1.4.1.562.36.2.1.100.6.7.10.10.1.11 | INTEGER | read-only | This attribute displays how the neighbor became an entry. |
| mscVrIpOspfLsdb | 1.3.6.1.4.1.562.36.2.1.100.6.7.11 | |||
| mscVrIpOspfLsdbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpOspfLsdb components. | |
| mscVrIpOspfLsdbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfLsdb component. | |
| ROW mscVrIpOspfLsdbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpOspfLsdb components. These components cannot be added nor deleted. |
| STR mscVrIpOspfLsdbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfLsdbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfLsdb tables. |
| IP mscVrIpOspfLsdbAreaIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfLsdb tables. |
| I32 mscVrIpOspfLsdbLsdbTypeIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpOspfLsdb tables. |
| IP mscVrIpOspfLsdbLsIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfLsdb tables. |
| IP mscVrIpOspfLsdbRouterIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.1.1.13 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfLsdb tables. |
| mscVrIpOspfLsdbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the Operational set of attributes for the LsdbEntry. | |
| mscVrIpOspfLsdbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10.1 | not-accessible | An entry in the mscVrIpOspfLsdbOperTable. | |
| U32 mscVrIpOspfLsdbSequence | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10.1.1 | Unsigned32 | read-only | A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. |
| G32 mscVrIpOspfLsdbAge | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10.1.2 | Gauge32 | read-only | The age of the Link State Advertisement in seconds. |
| U32 mscVrIpOspfLsdbChecksum | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10.1.3 | Unsigned32 | read-only | The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum. |
| STR mscVrIpOspfLsdbAdvertisement | 1.3.6.1.4.1.562.36.2.1.100.6.7.11.10.1.4 | HexString | read-only | The entire LSA including its header. |
| mscVrIpOspfExtLsdb | 1.3.6.1.4.1.562.36.2.1.100.6.7.12 | |||
| mscVrIpOspfExtLsdbRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpOspfExtLsdb components. | |
| mscVrIpOspfExtLsdbRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1 | not-accessible | A single entry in the table represents a single mscVrIpOspfExtLsdb component. | |
| ROW mscVrIpOspfExtLsdbRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpOspfExtLsdb components. These components cannot be added nor deleted. |
| STR mscVrIpOspfExtLsdbComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpOspfExtLsdbStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpOspfExtLsdb tables. |
| I32 mscVrIpOspfExtLsdbLsdbTypeIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.10 | Integer32 | not-accessible | This variable represents an index for the mscVrIpOspfExtLsdb tables. |
| IP mscVrIpOspfExtLsdbLsIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfExtLsdb tables. |
| IP mscVrIpOspfExtLsdbRouterIdIndex | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpOspfExtLsdb tables. |
| mscVrIpOspfExtLsdbOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group describes the operational set of attributes for the ExtLsdbEntry. | |
| mscVrIpOspfExtLsdbOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10.1 | not-accessible | An entry in the mscVrIpOspfExtLsdbOperTable. | |
| U32 mscVrIpOspfExtLsdbSequence | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10.1.1 | Unsigned32 | read-only | A signed 32-bit integer, used to detect old and duplicate LSAs. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. |
| G32 mscVrIpOspfExtLsdbAge | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10.1.2 | Gauge32 | read-only | The age of the Link State Advertisement in seconds. |
| U32 mscVrIpOspfExtLsdbChecksum | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10.1.3 | Unsigned32 | read-only | The checksum of the complete contents of the advertisement, excepting the age field. The checksum used is the Fletcher checksum. |
| STR mscVrIpOspfExtLsdbAdvertisement | 1.3.6.1.4.1.562.36.2.1.100.6.7.12.10.1.4 | HexString | read-only | The entire LSA including its header. |
| mscVrIpOspfProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.100 | not-accessible | This group of attributes are used to configure the OSPF component. | |
| mscVrIpOspfProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1 | not-accessible | An entry in the mscVrIpOspfProvTable. | |
| ROU mscVrIpOspfRouterId | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.1 | RouterID | read-write | This attribute is an Ip Address that uniquely identifies the router in the autonomous system. |
| INT mscVrIpOspfSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.2 | INTEGER | read-write | The administrative status of the OSPF Component in this Virtual Router. |
| INT mscVrIpOspfAsBdrRtrStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.3 | INTEGER | read-write | This attribute is a flag to note whether this router is an autonomous system border router. If this router is configured to export any routes learned from other than OSPF-internal protocol, this attribute should be configured as autonomous system border router. |
| INT mscVrIpOspfTosSupport | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.4 | INTEGER | read-write | The router's support for type-of-service routing. Only one value will be allowed. This is a deviation from supporting the MIB. |
| INT mscVrIpOspfExtLsdbLimit | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.5 | INTEGER | read-write | The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there is no limit, that is the maximum number of external OSPF routes that this autonomous system border router will originate. It will begin to flush LSA(Link State Advertisement)s, if an ASBR might receive bursts of external routes (for example, a regional network), then the parameter should be configured to a reasonable level. If there are less than two thousand routes and large bursts are unlikely, then the default should be adequate. This parameter will not affect the number of external OSPF routes a router will store in it's database. |
| U32 mscVrIpOspfMulticastForward | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.6 | Unsigned32 | read-write | A bit mask indicating the limits on Network Layer Multicast(class D) forwarding. It is represented as a sum of the following: if intra-Area forwarding is permitted, 1; else 0 if inter-Area forwarding is permitted 2; else 0 if inter-AS forwarding is permitted, 4; else 0 Only the value of 0 is being supported and this is a MIB deviation. |
| INT mscVrIpOspfMigrateRip | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.7 | INTEGER | read-write | This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migraterip enabled or with migraterip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases. |
| INT mscVrIpOspfGenerateDefaultRouteMetric | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.8 | INTEGER | read-write | If this router is configured as an autonomous system border router, then this attribute causes the default route to be generated with a metric value equal to generateDefaultRouteMetric value. This route is put in the OSPF update along with the normal update routes when updates are sent to the neighbors. No default route will be generated if the value is 0. |
| INT mscVrIpOspfRedistributeIbgp | 1.3.6.1.4.1.562.36.2.1.100.6.7.100.1.9 | INTEGER | read-write | This attribute specifies whether this Ospf instance allows to exporting of any routes learned from internal Bgp peers (IBGP) to Ospf. If the value of this attribute is true, and if an export policy is specified to distribute, then Ospf allows any IBGP routes to be distributed to Ospf. If the value of this attribute is false, Ospf does not allow IBGP routes to be distributed to Ospf, even if an export policy is specified to distribute. |
| mscVrIpOspfOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.101 | not-accessible | These group of attributes identifies the operational attributes for this OSPF Component. | |
| mscVrIpOspfOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1 | not-accessible | An entry in the mscVrIpOspfOperTable. | |
| U32 mscVrIpOspfVersionNumber | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.1 | Unsigned32 | read-only | The Current Version number of the OSPF Protocol. (2). |
| INT mscVrIpOspfAreaBdrRtrStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.2 | INTEGER | read-only | This attribute is used to specify whether this router is configured as an area border router. |
| G32 mscVrIpOspfExternLsaCount | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.3 | Gauge32 | read-only | The number of external (LS type 5) link-state advertisements in the link- state database. |
| U32 mscVrIpOspfExternLsaChecksumSum | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.4 | Unsigned32 | read-only | The 32-bit unsigned sum of the LS checksums of the external link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| C32 mscVrIpOspfOriginateNewLsas | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.5 | Counter32 | read-only | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| C32 mscVrIpOspfRxNewLsas | 1.3.6.1.4.1.562.36.2.1.100.6.7.101.1.6 | Counter32 | read-only | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self- originated link-state advertisements. |
| mscVrIpOspfStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.102 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpOspfStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.102.1 | not-accessible | An entry in the mscVrIpOspfStateTable. | |
| INT mscVrIpOspfAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.7.102.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpOspfOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.7.102.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpOspfUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.7.102.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpOspfOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.7.105 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpOspfOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.7.105.1 | not-accessible | An entry in the mscVrIpOspfOperStatusTable. | |
| INT mscVrIpOspfSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.7.105.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIpRip | 1.3.6.1.4.1.562.36.2.1.100.6.8 | |||
| mscVrIpRipRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRip components. | |
| mscVrIpRipRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRip component. | |
| ROW mscVrIpRipRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRip components. These components can be added and deleted. |
| STR mscVrIpRipComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.8.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRipStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.8.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRip tables. |
| NON mscVrIpRipIndex | 1.3.6.1.4.1.562.36.2.1.100.6.8.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpRip tables. |
| mscVrIpRipImport | 1.3.6.1.4.1.562.36.2.1.100.6.8.2 | |||
| mscVrIpRipImportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRipImport components. | |
| mscVrIpRipImportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRipImport component. | |
| ROW mscVrIpRipImportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRipImport components. These components can be added and deleted. |
| STR mscVrIpRipImportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRipImportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRipImport tables. |
| I32 mscVrIpRipImportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpRipImport tables. |
| mscVrIpRipImportNet | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2 | |||
| mscVrIpRipImportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRipImportNet components. | |
| mscVrIpRipImportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRipImportNet component. | |
| ROW mscVrIpRipImportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRipImportNet components. These components can be added and deleted. |
| STR mscVrIpRipImportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRipImportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRipImportNet tables. |
| I32 mscVrIpRipImportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpRipImportNet tables. |
| mscVrIpRipImportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.10 | not-accessible | This group contains attributes for the XXXX NetworkList component for the Import Policy to be applied to | |
| mscVrIpRipImportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.10.1 | not-accessible | An entry in the mscVrIpRipImportNetProvTable. | |
| IP mscVrIpRipImportNetIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.10.1.1 | IpAddress | read-write | This attribute specifies the IP address that needs to be matched against in this network list for the Import Policy to be applied to. |
| IP mscVrIpRipImportNetIpMask | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.2.10.1.2 | IpAddress | read-write | This attribute specifies the IP mask for the attribute ipAddress. |
| mscVrIpRipImportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10 | not-accessible | This is the group of provisionable attributes for the XXXX Import Subcomponent. | |
| mscVrIpRipImportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10.1 | not-accessible | An entry in the mscVrIpRipImportProvTable. | |
| INT mscVrIpRipImportUsageFlag | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10.1.1 | INTEGER | read-write | This flag when set to ignore indicates the routes that are not used and if set to use, indicates the routes which are used. |
| U32 mscVrIpRipImportImportMetric | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10.1.2 | Unsigned32 | read-write | This attribute is used to override the default import metric for the RIP protocol. This value is not used to select which routes to use or ignore, rather it is the metric to be used in the routing table for the routes imported for this import policy. A value of zero indicates that the metric received in the update will be used. |
| IP mscVrIpRipImportNeighbor | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10.1.3 | IpAddress | read-write | This attribute indicates the IP Address of the neighbor this policy will apply to. |
| IP mscVrIpRipImportInterface | 1.3.6.1.4.1.562.36.2.1.100.6.8.2.10.1.4 | IpAddress | read-write | This attribute specifies the RIP interface to which this import policy applies. The value of 0.0.0.0 implies any RIP interface on the virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. |
| mscVrIpRipExport | 1.3.6.1.4.1.562.36.2.1.100.6.8.3 | |||
| mscVrIpRipExportRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRipExport components. | |
| mscVrIpRipExportRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRipExport component. | |
| ROW mscVrIpRipExportRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRipExport components. These components can be added and deleted. |
| STR mscVrIpRipExportComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRipExportStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRipExport tables. |
| I32 mscVrIpRipExportIndex | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpRipExport tables. |
| mscVrIpRipExportNet | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2 | |||
| mscVrIpRipExportNetRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRipExportNet components. | |
| mscVrIpRipExportNetRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRipExportNet component. | |
| ROW mscVrIpRipExportNetRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRipExportNet components. These components can be added and deleted. |
| STR mscVrIpRipExportNetComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRipExportNetStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRipExportNet tables. |
| I32 mscVrIpRipExportNetIndex | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpRipExportNet tables. |
| mscVrIpRipExportNetProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.10 | not-accessible | This group identifies the set of Provisionable attributes for the ExportNetworkList component. | |
| mscVrIpRipExportNetProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.10.1 | not-accessible | An entry in the mscVrIpRipExportNetProvTable. | |
| IP mscVrIpRipExportNetIpAddress | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.10.1.1 | IpAddress | read-write | This attribute identifies the 32 bit IP address to match against. |
| IP mscVrIpRipExportNetIpMask | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.2.10.1.2 | IpAddress | read-write | This attribute is the IP Mask to be used with the IP Address to match against. |
| mscVrIpRipExportProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10 | not-accessible | This group contains all the provisioned attributes for the Export component. | |
| mscVrIpRipExportProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1 | not-accessible | An entry in the mscVrIpRipExportProvTable. | |
| INT mscVrIpRipExportAdvertiseStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.1 | INTEGER | read-write | This attribute specifies if the routes that match this export policy are advertised (send) or not advertised (block). |
| U32 mscVrIpRipExportExportMetric | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.2 | Unsigned32 | read-write | This attribute specifies the metric to be used on the routes being exported as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of exportMetric is ignored. The exportMetric value is not used to select which routes to block or send, but rather the metric value advertised for the routes. A value of 0 indicates that the metric associated with the route in the forwarding table is used. |
| INT mscVrIpRipExportProtocol | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.3 | INTEGER | read-write | This attribute specifies the routes to which this export policy applies based on the routing protocol of how the routes are learned. If it is set to all, this export policy applies to all routes except internal BGP routes in the forwarding table. |
| IP mscVrIpRipExportRipInterface | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.4 | IpAddress | read-write | This attribute specifies the RIP learned routes to which this export policy applies, based on the RIP interface from which the routes are learned. This attribute can only be non zero when the protocol is set to rip. The value of 0.0.0.0 implies any RIP interface on the same virtual router; otherwise the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. DESCRIPTION |
| U32 mscVrIpRipExportEgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.5 | Unsigned32 | read-write | This attribute specifies the EGP learned routes to which this export policy applies, based on the EGP autonomous system identifier of which the routes are learned from. This attribute can only be non zero when protocol is set to egp. The value of 0 implies any EGP autonomous system; otherwise the value of this attribute must match the asId of an EGP neighbor on the same virtual router. |
| U32 mscVrIpRipExportOspfTag | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.6 | Unsigned32 | read-write | This attribute specifies the OSPF learned external routes to which this export policy applies, based on the learned OSPF tag of the routes. This attribute can only be set to a non default value when protocol is set to ospfExternal. The default value of 4294967295 implies any tag. |
| IP mscVrIpRipExportOutInterface | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.7 | IpAddress | read-write | This attribute specifies the RIP interface on the virtual router which routes are exported onto as a result of matching this export policy. If the attribute advertiseStatus is set to block, then the value of outInterface is ignored. The outInterface value is not used to select which routes to block or send, but rather where to export the routes. A value of 0.0.0.0 indicates that the routes are exported to all RIP interfaces on the virtual router. Otherwise, the value of this attribute must match the interface address of a LogicalIf that has a RipIf on the same virtual router. |
| U32 mscVrIpRipExportBgpAsId | 1.3.6.1.4.1.562.36.2.1.100.6.8.3.10.1.8 | Unsigned32 | read-write | This key attribute specifies the BGP AS from which the routes are learned. This key will be used only when the protocol is set to bgpExternal. bgpAsId of 0 matches all BGP ASs. |
| mscVrIpRipProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.10 | not-accessible | This group contains the provisionable attributes for the RIP component | |
| mscVrIpRipProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.10.1 | not-accessible | An entry in the mscVrIpRipProvTable. | |
| INT mscVrIpRipMigrateRip | 1.3.6.1.4.1.562.36.2.1.100.6.8.10.1.2 | INTEGER | read-write | This attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. Note: This parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute value to disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migrateRip enabled or with migrateRip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases. |
| INT mscVrIpRipRfc1058MetricUsage | 1.3.6.1.4.1.562.36.2.1.100.6.8.10.1.3 | INTEGER | read-write | This attribute determines the metric usage for this RIP instance. This flag is used to determine the way metrics are incremented. RFC1058 way : Sending Update: This is to use the metric for the route from the routing table as the advertised metric to be sent for that route. Nothing is ever added to this value from the sending side. The only special case handling is that if the route being advertised is the network route of a directly connectednetwork, the metric in the routing table will be zero. Then the RipIf interface metric for the interface being advertised is used as the advertise metric. If the interface being advertised is not a Rip interface, then metric value of 1 is used. Receiving Update: Add receiving interface's RIP metric to the metric for the route in the received advertisement and install the result in the receiver's routing table as the metric for that route. Older way: Sending Updates: Add the out going interfaces rip metric to the metric for a route in the routing table to form the metric to be advertised for that route. Receiving Updates: The metric received in the advertisement for a route is put directly in the routing table as the metric for that route. Note: It is recommended that, all the routers in this autonomous system should be following the rfc1058 metric system. Setting this flag to disabled will have the effect of running the RIP with old metric incrementing system. |
| INT mscVrIpRipGenerateDiscardRoute | 1.3.6.1.4.1.562.36.2.1.100.6.8.10.1.4 | INTEGER | read-write | This attribute when set to yes will add network disacrd routes to the routing and forwarding table for the subnetted interfaces that are running RIP. |
| INT mscVrIpRipRedistributeIbgp | 1.3.6.1.4.1.562.36.2.1.100.6.8.10.1.5 | INTEGER | read-write | This attribute specifies whether this Rip instance allows to exporting of any routes learned from internal Bgp peers (IBGP) to Rip. If the value of this attribute is true, and if an export policy is specified to distribute, then Rip allows any IBGP routes to be distributed to Rip. If the value of this attribute is false, Rip does not allow IBGP routes to be distributed to Rip, even if an export policy is specified to distribute. |
| mscVrIpRipStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.11 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpRipStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.11.1 | not-accessible | An entry in the mscVrIpRipStateTable. | |
| INT mscVrIpRipAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.8.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpRipOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.8.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpRipUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.8.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpRipAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.12 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrIpRipAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.12.1 | not-accessible | An entry in the mscVrIpRipAdminControlTable. | |
| INT mscVrIpRipSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.12.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrIpRipOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.15 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpRipOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.15.1 | not-accessible | An entry in the mscVrIpRipOperStatusTable. | |
| INT mscVrIpRipSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.8.15.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIpRipOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.8.16 | not-accessible | This group defines a set of operational attributes belonging to the RIP component. It corresponds to the rip2Globals table in the RIP-2 standard MIB. | |
| mscVrIpRipOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.8.16.1 | not-accessible | An entry in the mscVrIpRipOperTable. | |
| C32 mscVrIpRipRouteChangesMade | 1.3.6.1.4.1.562.36.2.1.100.6.8.16.1.1 | Counter32 | read-only | This attribute counts the route changes made to the IP Route Database by Rip. This does not include the refresh of the route's age. |
| C32 mscVrIpRipQueryResponses | 1.3.6.1.4.1.562.36.2.1.100.6.8.16.1.2 | Counter32 | read-only | This attribute counts the responses sent to RIP queries from other systems. |
| mscVrIpStatic | 1.3.6.1.4.1.562.36.2.1.100.6.9 | |||
| mscVrIpStaticRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.1 | not-accessible | This entry controls the addition and deletion of mscVrIpStatic components. | |
| mscVrIpStaticRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.1.1 | not-accessible | A single entry in the table represents a single mscVrIpStatic component. | |
| ROW mscVrIpStaticRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.9.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpStatic components. These components can be added and deleted. |
| STR mscVrIpStaticComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.9.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpStaticStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.9.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpStatic tables. |
| NON mscVrIpStaticIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpStatic tables. |
| mscVrIpStaticRoute | 1.3.6.1.4.1.562.36.2.1.100.6.9.2 | |||
| mscVrIpStaticRouteRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpStaticRoute components. | |
| mscVrIpStaticRouteRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpStaticRoute component. | |
| ROW mscVrIpStaticRouteRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpStaticRoute components. These components can be added and deleted. |
| STR mscVrIpStaticRouteComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpStaticRouteStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpStaticRoute tables. |
| IP mscVrIpStaticRouteDestAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpStaticRoute tables. |
| IP mscVrIpStaticRouteDestMaskIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpStaticRoute tables. |
| I32 mscVrIpStaticRouteTypeOfServiceIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.1.1.12 | Integer32 | not-accessible | This variable represents an index for the mscVrIpStaticRoute tables. |
| mscVrIpStaticRouteNh | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2 | |||
| mscVrIpStaticRouteNhRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpStaticRouteNh components. | |
| mscVrIpStaticRouteNhRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpStaticRouteNh component. | |
| ROW mscVrIpStaticRouteNhRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpStaticRouteNh components. These components can be added and deleted. |
| STR mscVrIpStaticRouteNhComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpStaticRouteNhStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpStaticRouteNh tables. |
| IP mscVrIpStaticRouteNhIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpStaticRouteNh tables. |
| mscVrIpStaticRouteNhProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.10 | not-accessible | This group contains a provisionable set of attributes for the Static RouteEntry NextHop component. | |
| mscVrIpStaticRouteNhProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.10.1 | not-accessible | An entry in the mscVrIpStaticRouteNhProvTable. | |
| INT mscVrIpStaticRouteNhMetric | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.2.10.1.1 | INTEGER | read-write | This attribute specifies the primary routing metric for this NextHop. |
| mscVrIpStaticRouteProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.10 | not-accessible | This group contains a provisionable set of attributes for the static route entry component. | |
| mscVrIpStaticRouteProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.10.1 | not-accessible | An entry in the mscVrIpStaticRouteProvTable. | |
| INT mscVrIpStaticRoutePreferredOver | 1.3.6.1.4.1.562.36.2.1.100.6.9.2.10.1.12 | INTEGER | read-write | This attribute indicates the preference of the static route in comparison with the OSPF route. intOspf means that the static route is chosen over the OSPF internal route, while extOspf means that the OSPF internal route is chosen over the static route. The default static route preference is set to extOspf . |
| mscVrIpStaticDiscard | 1.3.6.1.4.1.562.36.2.1.100.6.9.3 | |||
| mscVrIpStaticDiscardRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1 | not-accessible | This entry controls the addition and deletion of mscVrIpStaticDiscard components. | |
| mscVrIpStaticDiscardRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpStaticDiscard component. | |
| ROW mscVrIpStaticDiscardRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpStaticDiscard components. These components can be added and deleted. |
| STR mscVrIpStaticDiscardComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpStaticDiscardStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpStaticDiscard tables. |
| IP mscVrIpStaticDiscardDestAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpStaticDiscard tables. |
| IP mscVrIpStaticDiscardDestMaskIndex | 1.3.6.1.4.1.562.36.2.1.100.6.9.3.1.1.11 | IpAddress | not-accessible | This variable represents an index for the mscVrIpStaticDiscard tables. |
| mscVrIpStaticStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.9.10 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpStaticStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.9.10.1 | not-accessible | An entry in the mscVrIpStaticStateTable. | |
| INT mscVrIpStaticAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.9.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpStaticOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.9.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpStaticUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.9.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpNs | 1.3.6.1.4.1.562.36.2.1.100.6.10 | |||
| mscVrIpNsRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.10.1 | not-accessible | This entry controls the addition and deletion of mscVrIpNs components. | |
| mscVrIpNsRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.10.1.1 | not-accessible | A single entry in the table represents a single mscVrIpNs component. | |
| ROW mscVrIpNsRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.10.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpNs components. These components can be added and deleted. |
| STR mscVrIpNsComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.10.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpNsStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.10.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpNs tables. |
| NON mscVrIpNsIndex | 1.3.6.1.4.1.562.36.2.1.100.6.10.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpNs tables. |
| mscVrIpNsApply | 1.3.6.1.4.1.562.36.2.1.100.6.10.2 | |||
| mscVrIpNsApplyRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpNsApply components. | |
| mscVrIpNsApplyRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpNsApply component. | |
| ROW mscVrIpNsApplyRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpNsApply components. These components can be added and deleted. |
| STR mscVrIpNsApplyComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpNsApplyStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpNsApply tables. |
| I32 mscVrIpNsApplyIndex | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpNsApply tables. |
| mscVrIpNsApplyProvisionedTable | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10 | not-accessible | The instance of provisioned information relating to a filter application to IP packet. | |
| mscVrIpNsApplyProvisionedEntry | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1 | not-accessible | An entry in the mscVrIpNsApplyProvisionedTable. | |
| STR mscVrIpNsApplyFilter | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.1 | AsciiString | read-write | The name of the filter to be applied to packet matching the conditions in this entry. |
| IP mscVrIpNsApplyIpAddress1 | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.2 | IpAddress | read-write | The first IP address used to compare. |
| IP mscVrIpNsApplyIpMask1 | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.3 | IpAddress | read-write | The first netmask associated with ipAddress1 used to compare. |
| IP mscVrIpNsApplyIpAddress2 | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.4 | IpAddress | read-write | This second IP address used to compare. |
| IP mscVrIpNsApplyIpMask2 | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.5 | IpAddress | read-write | This second netmask associated with ipAddress2 used to compare. |
| INT mscVrIpNsApplyDirection | 1.3.6.1.4.1.562.36.2.1.100.6.10.2.10.1.6 | INTEGER | read-write | Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction). |
| mscVrIpNsProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.10.10 | not-accessible | This group contains provisionable attributes for the NetSentry component. | |
| mscVrIpNsProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.10.10.1 | not-accessible | An entry in the mscVrIpNsProvTable. | |
| STR mscVrIpNsFirstFilter | 1.3.6.1.4.1.562.36.2.1.100.6.10.10.1.1 | AsciiString | read-write | The firstFilter is the first filter point which affects all IP packets before they have been examined in any way for their origin and destination. The most common use of a firstFilter point is to collect statistis for all packets arriving at the route on any interface, before any subsequent filter processing changes their direction or disposition. |
| STR mscVrIpNsLocalInFilter | 1.3.6.1.4.1.562.36.2.1.100.6.10.10.1.2 | AsciiString | read-write | The localInFilter is the second filter point which uses by network administrator to perform a common action on all IP packets that physically arrive over a specific logical interface, regardless of the packet's stated source or destination. Typical uses for a localInFilter include verifying that known Ethernet media source addresses match known IP addresses, or confirming that the IP packet source addresses of received IP packet fall within a narrow range. |
| STR mscVrIpNsLocalOutFilter | 1.3.6.1.4.1.562.36.2.1.100.6.10.10.1.3 | AsciiString | read-write | The localOutFilter is the third filter point which applies to any IP packet that will be transmitted from the router to the medium associated with the interface, regardless of its source, destination, or what type of decision was made to cause the datagram to be transmitted on this interface. localOutFilter generally used to ensure that certain paterns of traffic do not enter the network or reach a second IP router on that network. For example, localOutFilter can be used as the exclusion of all IP packets above a certain security classification, or collecting statistics on the amount of IP fragments performed on an outgoing interface. |
| STR mscVrIpNsLastFilter | 1.3.6.1.4.1.562.36.2.1.100.6.10.10.1.4 | AsciiString | read-write | lastFilter is the fourth and last filter point to be excecuted after all other routing and filtering decisions have been made on the IP packet, and transmission of the information is imminent. lastFilter is generally used to collect statistics on traffic after all previous control and routing decisions have been made. |
| mscVrIpArp | 1.3.6.1.4.1.562.36.2.1.100.6.11 | |||
| mscVrIpArpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.1 | not-accessible | This entry controls the addition and deletion of mscVrIpArp components. | |
| mscVrIpArpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.1.1 | not-accessible | A single entry in the table represents a single mscVrIpArp component. | |
| ROW mscVrIpArpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.11.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpArp components. These components cannot be added nor deleted. |
| STR mscVrIpArpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.11.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpArpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.11.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpArp tables. |
| NON mscVrIpArpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.11.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpArp tables. |
| mscVrIpArpHost | 1.3.6.1.4.1.562.36.2.1.100.6.11.2 | |||
| mscVrIpArpHostRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpArpHost components. | |
| mscVrIpArpHostRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpArpHost component. | |
| ROW mscVrIpArpHostRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpArpHost components. These components can be added and deleted. |
| STR mscVrIpArpHostComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpArpHostStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpArpHost tables. |
| IP mscVrIpArpHostHostAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.1.1.10 | IpAddress | not-accessible | This variable represents the index for the mscVrIpArpHost tables. |
| mscVrIpArpHostProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10 | not-accessible | This group contains the provisionable attributes of the HostEntry component. | |
| mscVrIpArpHostProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1 | not-accessible | An entry in the mscVrIpArpHostProvTable. | |
| PHY mscVrIpArpHostPhysAddress | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1.1 | PhysAddress | read-write | This attribute identifies the physical address of the host being defined. The value for this attribute should only be specified for media types supporting physical addresses (e.g. ethernet, fddi, tokenRing etc.) |
| U32 mscVrIpArpHostMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1.2 | Unsigned32 | read-write | Specify the maximum transmit unit (MTU) size that can be accepted by the host. If this value is not specified, the value for the media interface is used. The specified MTU must be less than or equal to the interface's MTU size. |
| U32 mscVrIpArpHostPermanentVirtualCircuitNumber | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1.3 | Unsigned32 | read-write | Specify a permanent virtual circuit number to the remote host on X.25 or frame relay media. The value for this attribute can only be specified for X.25 or frame relay media. |
| IP mscVrIpArpHostTunnelDestinationAddress | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1.4 | IpAddress | read-write | This attribute specifies the IP address of a remote IP tunnel endpoint in the shared domain. A value of 0.0.0.0 is used when the entry is not referring to an IP tunnel. |
| INT mscVrIpArpHostEncap | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.10.1.5 | INTEGER | read-write | This attribute specifies the encapsulation type for the host. The value for this attribute should only be specified for the hosts on the ethernet media. If a value of auto is specified, the application based on the media will determine the proper applicable encapsulation type. |
| mscVrIpArpHostOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.11 | not-accessible | This group contains the operational attributes of the HostEntry component. | |
| mscVrIpArpHostOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.11.1 | not-accessible | An entry in the mscVrIpArpHostOperTable. | |
| U32 mscVrIpArpHostOperMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.11.1.4 | Unsigned32 | read-only | This attribute indicates the operational value of the maximum transmission unit. |
| INT mscVrIpArpHostOperEncap | 1.3.6.1.4.1.562.36.2.1.100.6.11.2.11.1.5 | INTEGER | read-only | This attribute indicates the operational encapsulation type. if the value of the attribute encap is set to auto, then the application will determine the encapsulation type based on the media being used and assigns the appropriate value. |
| mscVrIpArpDynHost | 1.3.6.1.4.1.562.36.2.1.100.6.11.3 | |||
| mscVrIpArpDynHostRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpArpDynHost components. | |
| mscVrIpArpDynHostRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1 | not-accessible | A single entry in the table represents a single mscVrIpArpDynHost component. | |
| ROW mscVrIpArpDynHostRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpArpDynHost components. These components cannot be added nor deleted. |
| STR mscVrIpArpDynHostComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpArpDynHostStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpArpDynHost tables. |
| IP mscVrIpArpDynHostHostAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpArpDynHost tables. |
| INT mscVrIpArpDynHostCosIndex | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.1.1.11 | INTEGER | not-accessible | This variable represents an index for the mscVrIpArpDynHost tables. |
| mscVrIpArpDynHostOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the DynHostEntry component. | |
| mscVrIpArpDynHostOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1 | not-accessible | An entry in the mscVrIpArpDynHostOperTable. | |
| PHY mscVrIpArpDynHostPhysAddress | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.1 | PhysAddress | read-only | This attribute indicates the physical address of the host in canonical form. |
| U32 mscVrIpArpDynHostMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.3 | Unsigned32 | read-only | This attribute indicates the maximum MTU size that can be accepted by the host. |
| INT mscVrIpArpDynHostEncapsulationType | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.4 | INTEGER | read-only | This attribute indicates the encapsulation type of the host. |
| U32 mscVrIpArpDynHostPermanentVirtualCircuitNumber | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.5 | Unsigned32 | read-only | This attribute indicates the permanent virtual circuit number to the remote host. |
| NUM mscVrIpArpDynHostIfIndex | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.6 | InterfaceIndex | read-only | This attribute indicates the ifIndex of the protocol port that is associated with this entry. |
| INT mscVrIpArpDynHostType | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.7 | INTEGER | read-only | This attribute indicates how this entry was learned. |
| PHY mscVrIpArpDynHostNcPhysAddress | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.8 | PhysAddress | read-only | This attribute indicates the physical address of the host in non-canonical form. This attribute is not displayed for hosts on non-LAN media. |
| IP mscVrIpArpDynHostTunnelDestinationAddress | 1.3.6.1.4.1.562.36.2.1.100.6.11.3.10.1.9 | IpAddress | read-only | This attribute indicates the IP address of a remote IP tunnel endpoint in the shared domain. A value of 0.0.0.0 is used when the entry is not referring to an IP tunnel. |
| mscVrIpArpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.11.10 | not-accessible | The ARP refresh feature allows the router to periodically verify ARP table entries. Whenever the router updates an ARP entry, or creates a new entry, a timeout value is assigned to the entry. When the timeout for an entry expires, the router will send a unicast ARP request to the currently-known physical address. If an ARP response comes back, the entry will be assigned a new timeout. If, however, the host has gone away or been assigned a new physical address, the host will not respond to the unicast ARP, and the entry will be removed from the ARP table. The new physical address will be discovered through the normal ARP mechanism when the next communication is attempted to the host. | |
| mscVrIpArpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.11.10.1 | not-accessible | An entry in the mscVrIpArpProvTable. | |
| INT mscVrIpArpAutoRefresh | 1.3.6.1.4.1.562.36.2.1.100.6.11.10.1.1 | INTEGER | read-write | This attribute is used to enable or disable the ARP refresh feature. |
| U32 mscVrIpArpAutoRefreshTimeout | 1.3.6.1.4.1.562.36.2.1.100.6.11.10.1.2 | Unsigned32 | read-write | This attribute defines the timeout value, in minutes, which is assigned to updated ARP entries, or newly created ARP entries. The range for the timeout is 1 minute to 1440 minutes (24 hours). |
| mscVrIpIcmp | 1.3.6.1.4.1.562.36.2.1.100.6.12 | |||
| mscVrIpIcmpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.12.1 | not-accessible | This entry controls the addition and deletion of mscVrIpIcmp components. | |
| mscVrIpIcmpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.12.1.1 | not-accessible | A single entry in the table represents a single mscVrIpIcmp component. | |
| ROW mscVrIpIcmpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.12.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpIcmp components. These components cannot be added nor deleted. |
| STR mscVrIpIcmpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.12.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpIcmpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.12.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpIcmp tables. |
| NON mscVrIpIcmpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.12.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpIcmp tables. |
| mscVrIpIcmpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.12.10 | not-accessible | This group holds provisioned attributes for ICMP. | |
| mscVrIpIcmpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.12.10.1 | not-accessible | An entry in the mscVrIpIcmpProvTable. | |
| INT mscVrIpIcmpSendRedirect | 1.3.6.1.4.1.562.36.2.1.100.6.12.10.1.1 | INTEGER | read-write | This attribute specifies whether an ICMP redirect will be sent. If enabled, the router may send an ICMP redirect if a an Ip packet is being routed out the same logicalInterface as it was received on. The router will only send host ICMP redirects. If disabled, the router will never send a ICMP redirect. |
| INT mscVrIpIcmpSendHostUnreachable | 1.3.6.1.4.1.562.36.2.1.100.6.12.10.1.2 | INTEGER | read-write | This attribute specifies whether host unreachable will be sent or not. |
| mscVrIpIcmpStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.12.11 | not-accessible | This group holds statistics for ICMP. | |
| mscVrIpIcmpStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1 | not-accessible | An entry in the mscVrIpIcmpStatsTable. | |
| C32 mscVrIpIcmpInMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.1 | Counter32 | read-only | This attribute indicates the number of ICMP messages received by this gateway. This number includes inErrors. inMsgs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.2 | Counter32 | read-only | This attribute indicates the number of ICMP messages received by this gateway but determined as having ICMP specific errors such as bad ICMP checksums or bad length. inErrors wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInDestUnreachs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.3 | Counter32 | read-only | This attribute indicates the number of ICMP destination unreachable messages received by this gateway. inDestUnreachs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInTimeExcds | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.4 | Counter32 | read-only | This attribute indicates the number of ICMP time exceeded messages received by this gateway. inTimeExcds wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInParmProbs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.5 | Counter32 | read-only | This attribute indicates the number of ICMP parameter problem messages received by this gateway. inParmProbs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInSrcQuenchs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.6 | Counter32 | read-only | This attribute indicates the number of ICMP source quench messages received by this gateway. inSrcQuenchs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInRedirects | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.7 | Counter32 | read-only | This attribute indicates the number of ICMP redirect messages received by this gateway. inRedirects wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInEchos | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.8 | Counter32 | read-only | This attribute indicates the number of ICMP echo request messages received by this gateway. inEchos wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInEchoReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.9 | Counter32 | read-only | This attribute indicates the number of ICMP echo reply messages received by this gateway. inEchoReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInTimestamps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.10 | Counter32 | read-only | This attribute indicates the number of ICMP timestamp request messages received by this gateway. inTimeStamps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInTimestampReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.11 | Counter32 | read-only | This attribute indicates the number of ICMP timestamp reply messages received by this gateway. inTimeStampReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInAddrMasks | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.12 | Counter32 | read-only | This attribute indicates the number of ICMP address mask request messages received by this gateway. inAddrMasks wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInAddrMaskReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.13 | Counter32 | read-only | This attribute indicates the number of ICMP address mask reply messages received by this gateway. inAddrMaskReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutMsgs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.14 | Counter32 | read-only | This attribute indicates the number of ICMP messages which this gateway attempted to send. This number includes outErrors. outMsgs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutErrors | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.15 | Counter32 | read-only | This attribute indicates the number of ICMP messages which this gateway did not send due to problems discovered within ICMP such as a lack of buffers. outErrors does not included errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. outErrors wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutDestUnreachs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.16 | Counter32 | read-only | This attribute indicates the number of ICMP destination unreachable messages sent by this gateway. outDestUnreachs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutTimeExcds | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.17 | Counter32 | read-only | This attribute indicates the number of ICMP time exceeded messages sent by this gateway. outTimeExcds wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutParmProbs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.18 | Counter32 | read-only | This attribute indicates the number of ICMP parameter problem messages sent by this gateway. outParmProbs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutSrcQuenchs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.19 | Counter32 | read-only | This attribute indicates the number of ICMP source quench messages sent by this gateway. ourSrcQuench wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutRedirects | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.20 | Counter32 | read-only | This attribute indicates the number of ICMP redirect messages sent by this gateway. outRedirects wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutEchos | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.21 | Counter32 | read-only | This attribute indicates the number of ICMP echo request messages sent by this gateway. outEchos wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutEchoReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.22 | Counter32 | read-only | This attribute indicates the number of ICMP echo reply messages sent by this gateway. outEchoReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutTimestamps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.23 | Counter32 | read-only | This attribute indicates the number of ICMP timestamp request messages sent by this gateway. outTimeStamps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutTimestampReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.24 | Counter32 | read-only | This attribute indicates the number of ICMP timestamp reply messages sent by this gateway. outTimeStampReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutAddrMasks | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.25 | Counter32 | read-only | This attribute indicates the number of ICMP address mask request messages sent by this gateway. outAddrMasks wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutAddrMaskReps | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.26 | Counter32 | read-only | This attribute indicates the number of ICMP address mask reply message sent by this gateway. outAddrMaskReps wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInRtrAdvs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.27 | Counter32 | read-only | This attribute indicates the number of ICMP router advertisement messages received by this gateway. inRtrAdvs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpInRtrSolicits | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.28 | Counter32 | read-only | This attribute indicates the number of ICMP router solicitation messages received by this gateway. inRtrSolicits wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutRtrAdvs | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.29 | Counter32 | read-only | This attribute indicates the number of ICMP router advertisement messages sent by this gateway. outRtrAdvs wraps to zero if it reaches its maximum defined value. |
| C32 mscVrIpIcmpOutRtrSolicits | 1.3.6.1.4.1.562.36.2.1.100.6.12.11.1.30 | Counter32 | read-only | This attribute indicates the number of ICMP router solicitation messages sent by this gateway. outRtrSolicits wraps to zero if it reaches its maximum defined value. |
| mscVrIpRelayBC | 1.3.6.1.4.1.562.36.2.1.100.6.13 | |||
| mscVrIpRelayBCRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.13.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRelayBC components. | |
| mscVrIpRelayBCRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.13.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRelayBC component. | |
| ROW mscVrIpRelayBCRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.13.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpRelayBC components. These components cannot be added nor deleted. |
| STR mscVrIpRelayBCComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.13.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRelayBCStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.13.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRelayBC tables. |
| NON mscVrIpRelayBCIndex | 1.3.6.1.4.1.562.36.2.1.100.6.13.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpRelayBC tables. |
| mscVrIpRelayBCPort | 1.3.6.1.4.1.562.36.2.1.100.6.13.2 | |||
| mscVrIpRelayBCPortRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1 | not-accessible | This entry controls the addition and deletion of mscVrIpRelayBCPort components. | |
| mscVrIpRelayBCPortRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpRelayBCPort component. | |
| ROW mscVrIpRelayBCPortRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpRelayBCPort components. These components can be added and deleted. |
| STR mscVrIpRelayBCPortComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpRelayBCPortStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpRelayBCPort tables. |
| I32 mscVrIpRelayBCPortPortNumIndex | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpRelayBCPort tables. |
| mscVrIpRelayBCPortOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.10 | not-accessible | This group contains statistics related to InwPortEntry. | |
| mscVrIpRelayBCPortOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.10.1 | not-accessible | An entry in the mscVrIpRelayBCPortOperTable. | |
| C32 mscVrIpRelayBCPortRelayBcUdpCount | 1.3.6.1.4.1.562.36.2.1.100.6.13.2.10.1.1 | Counter32 | read-only | Indicates the number of forwarded packets with this destination UDP port number. relayBcUdpCount wraps to zero if reached its maximum. |
| mscVrIpRelayBCProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.13.10 | not-accessible | This group contains global configuration attributes for the Relay Broadcast component. | |
| mscVrIpRelayBCProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.13.10.1 | not-accessible | An entry in the mscVrIpRelayBCProvTable. | |
| INT mscVrIpRelayBCRelayStatus | 1.3.6.1.4.1.562.36.2.1.100.6.13.10.1.1 | INTEGER | read-write | Specifies whether or not IP will forward IP broadcast packets that were received as Link-Layer broadcasts. |
| INT mscVrIpRelayBCRelayNdStatus | 1.3.6.1.4.1.562.36.2.1.100.6.13.10.1.2 | INTEGER | read-write | Specifies whether or not IP will forward broadcast packets whose protocol is Sun ND. |
| mscVrIpRelayBCOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.13.11 | not-accessible | This group contains RelayBroadcast component statistics. | |
| mscVrIpRelayBCOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.13.11.1 | not-accessible | An entry in the mscVrIpRelayBCOperTable. | |
| C32 mscVrIpRelayBCRelayNdCount | 1.3.6.1.4.1.562.36.2.1.100.6.13.11.1.1 | Counter32 | read-only | Indicates the number of Sun ND packets received by this router which were forwarded. relayNdCount wraps to zero if reached its maximum. |
| mscVrIpUdp | 1.3.6.1.4.1.562.36.2.1.100.6.14 | |||
| mscVrIpUdpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.14.1 | not-accessible | This entry controls the addition and deletion of mscVrIpUdp components. | |
| mscVrIpUdpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.14.1.1 | not-accessible | A single entry in the table represents a single mscVrIpUdp component. | |
| ROW mscVrIpUdpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.14.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpUdp components. These components cannot be added nor deleted. |
| STR mscVrIpUdpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.14.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpUdpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.14.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpUdp tables. |
| NON mscVrIpUdpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.14.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpUdp tables. |
| mscVrIpUdpListenEntry | 1.3.6.1.4.1.562.36.2.1.100.6.14.2 | |||
| mscVrIpUdpListenEntryRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpUdpListenEntry components. | |
| mscVrIpUdpListenEntryRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpUdpListenEntry component. | |
| ROW mscVrIpUdpListenEntryRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpUdpListenEntry components. These components cannot be added nor deleted. |
| STR mscVrIpUdpListenEntryComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpUdpListenEntryStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpUdpListenEntry tables. |
| IP mscVrIpUdpListenEntryLocalAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpUdpListenEntry tables. |
| I32 mscVrIpUdpListenEntryLocalPortIndex | 1.3.6.1.4.1.562.36.2.1.100.6.14.2.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpUdpListenEntry tables. |
| mscVrIpUdpStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.14.10 | not-accessible | This group holds statictics for UDP. | |
| mscVrIpUdpStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.14.10.1 | not-accessible | An entry in the mscVrIpUdpStatsTable. | |
| C32 mscVrIpUdpInDatagrams | 1.3.6.1.4.1.562.36.2.1.100.6.14.10.1.1 | Counter32 | read-only | The number of UDP datagrams delivered to UDP users. inDatagrams wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpUdpNoPorts | 1.3.6.1.4.1.562.36.2.1.100.6.14.10.1.2 | Counter32 | read-only | The number of UDP datagrams received for which there was no application at the destination port. noPorts wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpUdpInErrors | 1.3.6.1.4.1.562.36.2.1.100.6.14.10.1.3 | Counter32 | read-only | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. inErrors wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpUdpOutDatagrams | 1.3.6.1.4.1.562.36.2.1.100.6.14.10.1.4 | Counter32 | read-only | The number of UDP datagrams sent from this gateway. outDatagrams wraps to zero if reaches its maximum defined value. |
| mscVrIpTcp | 1.3.6.1.4.1.562.36.2.1.100.6.15 | |||
| mscVrIpTcpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.15.1 | not-accessible | This entry controls the addition and deletion of mscVrIpTcp components. | |
| mscVrIpTcpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.15.1.1 | not-accessible | A single entry in the table represents a single mscVrIpTcp component. | |
| ROW mscVrIpTcpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.15.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpTcp components. These components cannot be added nor deleted. |
| STR mscVrIpTcpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.15.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpTcpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.15.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpTcp tables. |
| NON mscVrIpTcpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.15.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpTcp tables. |
| mscVrIpTcpTcpEntry | 1.3.6.1.4.1.562.36.2.1.100.6.15.2 | |||
| mscVrIpTcpTcpEntryRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpTcpTcpEntry components. | |
| mscVrIpTcpTcpEntryRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpTcpTcpEntry component. | |
| ROW mscVrIpTcpTcpEntryRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpTcpTcpEntry components. These components cannot be added nor deleted. |
| STR mscVrIpTcpTcpEntryComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpTcpTcpEntryStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpTcpTcpEntry tables. |
| IP mscVrIpTcpTcpEntryLocalAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.10 | IpAddress | not-accessible | This variable represents an index for the mscVrIpTcpTcpEntry tables. |
| I32 mscVrIpTcpTcpEntryLocalPortIndex | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.11 | Integer32 | not-accessible | This variable represents an index for the mscVrIpTcpTcpEntry tables. |
| IP mscVrIpTcpTcpEntryRemoteAddressIndex | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.12 | IpAddress | not-accessible | This variable represents an index for the mscVrIpTcpTcpEntry tables. |
| I32 mscVrIpTcpTcpEntryRemotePortIndex | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.1.1.13 | Integer32 | not-accessible | This variable represents an index for the mscVrIpTcpTcpEntry tables. |
| mscVrIpTcpTcpEntryOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains columnar entries for each end-point on the TCP. | |
| mscVrIpTcpTcpEntryOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.10.1 | not-accessible | An entry in the mscVrIpTcpTcpEntryOperTable. | |
| INT mscVrIpTcpTcpEntryState | 1.3.6.1.4.1.562.36.2.1.100.6.15.2.10.1.1 | INTEGER | read-write | This attribute reflects the current state of this Tcp connection. |
| mscVrIpTcpStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.15.10 | not-accessible | This group contains statistics for TCP. | |
| mscVrIpTcpStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1 | not-accessible | An entry in the mscVrIpTcpStatsTable. | |
| INT mscVrIpTcpRToAlgorithm | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.1 | INTEGER | read-only | Indicate which algorithm was used to calculate the timeout value used for retransmitting unackowledged octet. |
| U32 mscVrIpTcpRToMin | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.2 | Unsigned32 | read-only | Indicate the minimum value, measured in milliseconds, allowed for retransmission timeout. |
| U32 mscVrIpTcpRToMax | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.3 | Unsigned32 | read-only | Indicates the maximun value, measured in milliseconds, allowed for retransmission timeout. |
| INT mscVrIpTcpMaxConn | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.4 | INTEGER | read-only | Limit on number of connections the TCP can support. The value is always -1 which indicates that the number of connections supported is dynamic (limited by memory in the system). |
| C32 mscVrIpTcpActiveOpens | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.5 | Counter32 | read-only | The number of times TCP connections have made a direct transition to the synSent state from the closed state. |
| C32 mscVrIpTcpPassiveOpens | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.6 | Counter32 | read-only | The number of times TCP connections have made a direct transition to the synRcvd state from the listen state. |
| C32 mscVrIpTcpAttemptFails | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.7 | Counter32 | read-only | The number of times TCP connections have made a direct transition to the closed state from either the synSent state or the synRcvd state, plus the number of times TCP connections have made a direct transition to the listen state from the synRcvd state. |
| C32 mscVrIpTcpEstabResets | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.8 | Counter32 | read-only | The number of times TCP connections have made a direct transition to the closed state from either the established state or the closedWait state. |
| G32 mscVrIpTcpCurrEstab | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.9 | Gauge32 | read-only | The number of TCP connections for which the current state is either established or closedWait. |
| C32 mscVrIpTcpInSegs | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.10 | Counter32 | read-only | The number of segments received, including those received in error. This count includes segments received on currently established connections. |
| C32 mscVrIpTcpOutSegs | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.11 | Counter32 | read-only | The number of segments sent, including those on current connections but excluding those containing only retransmitted octets. |
| C32 mscVrIpTcpRetransSegs | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.12 | Counter32 | read-only | The number of segments retransmitted that is, the number of TCP segments transmitted containing one or more previously transmitted octets. |
| C32 mscVrIpTcpInErrs | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.13 | Counter32 | read-only | Total number of segments received in error, for example bad TCP checksum. |
| C32 mscVrIpTcpOutRsts | 1.3.6.1.4.1.562.36.2.1.100.6.15.10.1.14 | Counter32 | read-only | Number of TCP segments sent containing the RST flag. |
| mscVrIpBootp | 1.3.6.1.4.1.562.36.2.1.100.6.16 | |||
| mscVrIpBootpRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.1 | not-accessible | This entry controls the addition and deletion of mscVrIpBootp components. | |
| mscVrIpBootpRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBootp component. | |
| ROW mscVrIpBootpRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.16.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpBootp components. These components can be added and deleted. |
| STR mscVrIpBootpComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.16.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBootpStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.16.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBootp tables. |
| NON mscVrIpBootpIndex | 1.3.6.1.4.1.562.36.2.1.100.6.16.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpBootp tables. |
| mscVrIpBootpPpE | 1.3.6.1.4.1.562.36.2.1.100.6.16.2 | |||
| mscVrIpBootpPpERowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpBootpPpE components. | |
| mscVrIpBootpPpERowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1.1 | not-accessible | A single entry in the table represents a single mscVrIpBootpPpE component. | |
| ROW mscVrIpBootpPpERowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpBootpPpE components. These components cannot be added nor deleted. |
| STR mscVrIpBootpPpEComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpBootpPpEStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpBootpPpE tables. |
| STR mscVrIpBootpPpEIndex | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscVrIpBootpPpE tables. |
| mscVrIpBootpPpEOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component operational data. | |
| mscVrIpBootpPpEOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.10.1 | not-accessible | An entry in the mscVrIpBootpPpEOperTable. | |
| INT mscVrIpBootpPpEStatus | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.10.1.1 | INTEGER | read-only | This attribute indicates the status of the provisioned BootpPortEntry component. A value of disabled is used when the parent components, Vr, Ip, IpPort, or BootpRelayAgent is in a disabled state. A value of up is used when the BootpPortEntry is in an operational state. A state of down is used if the media associated with the BootpPortEntry is not ready or disabled. |
| mscVrIpBootpPpEStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains BootpPortEntry component statistics. | |
| mscVrIpBootpPpEStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1 | not-accessible | An entry in the mscVrIpBootpPpEStatsTable. | |
| C32 mscVrIpBootpPpEInRequests | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.1 | Counter32 | read-only | This attribute counts the total number of BOOTP Request messages received on this port. |
| C32 mscVrIpBootpPpEInReplies | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.2 | Counter32 | read-only | This attribute counts the total number of BOOTP Reply messages received on this port. |
| C32 mscVrIpBootpPpEOutRequests | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.3 | Counter32 | read-only | This attribute counts total the number of BOOTP Request messages broadcast out on this port. |
| C32 mscVrIpBootpPpEOutReplies | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.4 | Counter32 | read-only | This attribute counts the total number of BOOTP Reply messages sent out on this port. |
| C32 mscVrIpBootpPpEInRequestErrors | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.5 | Counter32 | read-only | This attribute counts the number of BOOTP Request messages received on this port but not forwarded due to an error. An error occurs if the BOOTP hop limit has been exceeded. |
| C32 mscVrIpBootpPpEInReplyErrors | 1.3.6.1.4.1.562.36.2.1.100.6.16.2.11.1.6 | Counter32 | read-only | This attribute counts the number of BOOTP Reply messages received on this port but not forwarded due to an error. An error occurs if the giaddr field in the BOOTP reply does not match an IP address assigned to this VirtualRouter, or if the output IpPort for the BOOTP reply is not provisioned for BOOTP. |
| mscVrIpBootpAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.10 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrIpBootpAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.10.1 | not-accessible | An entry in the mscVrIpBootpAdminControlTable. | |
| INT mscVrIpBootpSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.16.10.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrIpBootpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.11 | not-accessible | This group contains provisionable attributes for the BootpRelayAgent component. | |
| mscVrIpBootpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.11.1 | not-accessible | An entry in the mscVrIpBootpProvTable. | |
| U32 mscVrIpBootpHopDiscardThreshold | 1.3.6.1.4.1.562.36.2.1.100.6.16.11.1.1 | Unsigned32 | read-write | BOOTP packets contain a 'hops' field which is used to limit the number of relay agents that can process the packet (each relay agent increments the 'hops' field by one). This attribute is used by the relay agent to determine when to discard a BOOTP packet. If the 'hops' field exceeds the hopDiscardThreshold the BOOTP packet will be discarded. |
| mscVrIpBootpStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.12 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpBootpStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.12.1 | not-accessible | An entry in the mscVrIpBootpStateTable. | |
| INT mscVrIpBootpAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.16.12.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpBootpOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.16.12.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpBootpUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.16.12.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpBootpOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.16.13 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpBootpOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.16.13.1 | not-accessible | An entry in the mscVrIpBootpOperStatusTable. | |
| INT mscVrIpBootpSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.16.13.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIpCache | 1.3.6.1.4.1.562.36.2.1.100.6.17 | |||
| mscVrIpCacheRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.17.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscVrIpCache components. | |
| mscVrIpCacheRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.17.1.1 | not-accessible | A single entry in the table represents a single mscVrIpCache component. | |
| ROW mscVrIpCacheRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.17.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscVrIpCache components. These components cannot be added nor deleted. |
| STR mscVrIpCacheComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.17.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpCacheStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.17.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpCache tables. |
| I32 mscVrIpCacheIndex | 1.3.6.1.4.1.562.36.2.1.100.6.17.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpCache tables. |
| mscVrIpCacheStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.17.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpCacheStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.17.10.1 | not-accessible | An entry in the mscVrIpCacheStateTable. | |
| INT mscVrIpCacheAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.17.10.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpCacheOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.17.10.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpCacheUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.17.10.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpCacheOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.17.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group houses all the operational attributes of an Ip cache table. | |
| mscVrIpCacheOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.17.11.1 | not-accessible | An entry in the mscVrIpCacheOperTable. | |
| U32 mscVrIpCacheEntriesFree | 1.3.6.1.4.1.562.36.2.1.100.6.17.11.1.3 | Unsigned32 | read-only | This attribute is indicative of the number of free Ip cache table entries. A consistently high value for this attribute indicates that there is a resource surplus of the memory requirements for cache table. This surplus could be utilized elsewhere if needed by adjusting the cacheTableMaxEntries under the Ip component. |
| U32 mscVrIpCacheTotalLookups | 1.3.6.1.4.1.562.36.2.1.100.6.17.11.1.4 | Unsigned32 | read-only | This attribute indicates the total number of local cache lookups. It wraps around to 0 when it reaches the maximum value of 4294967295. |
| C32 mscVrIpCacheLookupMisses | 1.3.6.1.4.1.562.36.2.1.100.6.17.11.1.5 | Counter32 | read-only | This attribute indicates the total number of local cache lookup misses. It wraps around to 0 when it reaches the maximum value of 4294967295. |
| U32 mscVrIpCacheCacheTableMaxEntries | 1.3.6.1.4.1.562.36.2.1.100.6.17.11.1.395 | Unsigned32 | read-only | This attribute indicates the current maximum number of entries that can exist in the IP local cache table on each LP. |
| mscVrIpTunnel | 1.3.6.1.4.1.562.36.2.1.100.6.18 | |||
| mscVrIpTunnelRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.1 | not-accessible | This entry controls the addition and deletion of mscVrIpTunnel components. | |
| mscVrIpTunnelRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.1.1 | not-accessible | A single entry in the table represents a single mscVrIpTunnel component. | |
| ROW mscVrIpTunnelRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpTunnel components. These components can be added and deleted. |
| STR mscVrIpTunnelComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.18.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpTunnelStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.18.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpTunnel tables. |
| NON mscVrIpTunnelIndex | 1.3.6.1.4.1.562.36.2.1.100.6.18.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscVrIpTunnel tables. |
| mscVrIpTunnelSep | 1.3.6.1.4.1.562.36.2.1.100.6.18.10 | |||
| mscVrIpTunnelSepRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1 | not-accessible | This entry controls the addition and deletion of mscVrIpTunnelSep components. | |
| mscVrIpTunnelSepRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1.1 | not-accessible | A single entry in the table represents a single mscVrIpTunnelSep component. | |
| ROW mscVrIpTunnelSepRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpTunnelSep components. These components can be added and deleted. |
| STR mscVrIpTunnelSepComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpTunnelSepStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpTunnelSep tables. |
| I32 mscVrIpTunnelSepIndex | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpTunnelSep tables. |
| mscVrIpTunnelSepIfEntryTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.10 | not-accessible | This group contains the provisionable attributes for the ifEntry. | |
| mscVrIpTunnelSepIfEntryEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.10.1 | not-accessible | An entry in the mscVrIpTunnelSepIfEntryTable. | |
| INT mscVrIpTunnelSepIfAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.10.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. |
| NUM mscVrIpTunnelSepIfIndex | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.10.1.2 | InterfaceIndex | read-only | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| mscVrIpTunnelSepMpTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.11 | not-accessible | This group contains the base provisioning data for the media base component. | |
| mscVrIpTunnelSepMpEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.11.1 | not-accessible | An entry in the mscVrIpTunnelSepMpTable. | |
| LIN mscVrIpTunnelSepLinkToProtocolPort | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.11.1.1 | Link | read-write | This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface. |
| mscVrIpTunnelSepProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.12 | not-accessible | This group contains the provisionable attributes for the StaticEndPoint component. | |
| mscVrIpTunnelSepProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.12.1 | not-accessible | An entry in the mscVrIpTunnelSepProvTable. | |
| INT mscVrIpTunnelSepEncapType | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.12.1.1 | INTEGER | read-write | There are two types of encapsulation techniques for IP tunnel, IP in IP (RFC 2003) and GRE over IP (RFC 1701). This attributes specifies the encapsulation type of the IP tunnel. ipInIp: As defined in RFC 2003, it can be used to encapsulated IP and IP payload only. If IP is the only type of payload to be encapsulated by the tunnel, this type of encapsulation is recommended as it requires less processing and uses less bandwidth. greIp: As defined in RFC 1701, it can be used to encapsulate IP or IPX payload. To encapsulate IPX payload, this encapsulation type must be used. |
| IP mscVrIpTunnelSepSourceAddress | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.12.1.2 | IpAddress | read-write | This attribute specifies the IP address of the local end of the tunnel. The source address must be an address in the shared domain, and it must equal to an interface address on its own Virtual Router (under Vr/ Pp/ IpPort LogicalIf/). However, it must not be the interface address of the linked protocol port's IpPort component. |
| IP mscVrIpTunnelSepDestinationAddress | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.12.1.3 | IpAddress | read-write | This attribute specifies the IP address of the far end of the tunnel. It must not match any of the IP interface addresses on this Virtual Router. |
| mscVrIpTunnelSepOperTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.14 | not-accessible | This group contains the operational status attributes of the StaticEndPoint component. | |
| mscVrIpTunnelSepOperEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.14.1 | not-accessible | An entry in the mscVrIpTunnelSepOperTable. | |
| U32 mscVrIpTunnelSepDiscoveredPathMtu | 1.3.6.1.4.1.562.36.2.1.100.6.18.10.14.1.1 | Unsigned32 | read-only | This attribute indicates the latest learned Path MTU of the tunnel. An MTU is the maximum transmission unit of an arbitrary internet path. When a large amount of IP datagrams are to be transmitted, it is usually preferable that the datagrams be of the largest size that does not require fragmentation anywhere along the path from the source to the destination. This datagram size is referred to as the Path MTU (PMTU). It is equal to the minimum of the MTUs of each hop in the path. |
| mscVrIpTunnelMsep | 1.3.6.1.4.1.562.36.2.1.100.6.18.11 | |||
| mscVrIpTunnelMsepRowStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1 | not-accessible | This entry controls the addition and deletion of mscVrIpTunnelMsep components. | |
| mscVrIpTunnelMsepRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1.1 | not-accessible | A single entry in the table represents a single mscVrIpTunnelMsep component. | |
| ROW mscVrIpTunnelMsepRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscVrIpTunnelMsep components. These components can be added and deleted. |
| STR mscVrIpTunnelMsepComponentName | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscVrIpTunnelMsepStorageType | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscVrIpTunnelMsep tables. |
| I32 mscVrIpTunnelMsepIndex | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscVrIpTunnelMsep tables. |
| mscVrIpTunnelMsepIfEntryTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.10 | not-accessible | This group contains the provisionable attributes for the ifEntry. | |
| mscVrIpTunnelMsepIfEntryEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.10.1 | not-accessible | An entry in the mscVrIpTunnelMsepIfEntryTable. | |
| INT mscVrIpTunnelMsepIfAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.10.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. |
| NUM mscVrIpTunnelMsepIfIndex | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.10.1.2 | InterfaceIndex | read-only | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| mscVrIpTunnelMsepMpTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.11 | not-accessible | This group contains the base provisioning data for the media base component. | |
| mscVrIpTunnelMsepMpEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.11.1 | not-accessible | An entry in the mscVrIpTunnelMsepMpTable. | |
| LIN mscVrIpTunnelMsepLinkToProtocolPort | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.11.1.1 | Link | read-write | This attribute specifies the ProtocolPort to which this interface is linked to. The protocol port is the logical interface to the network. The protocol port component describes the logical characteristics of this interface. |
| mscVrIpTunnelMsepProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12 | not-accessible | This group contains the provisionable attributes for the MultipointStaticEndPoint component. | |
| mscVrIpTunnelMsepProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12.1 | not-accessible | An entry in the mscVrIpTunnelMsepProvTable. | |
| U32 mscVrIpTunnelMsepPathMtu | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12.1.1 | Unsigned32 | read-write | This attribute specifies the Path Maximum Transmission Unit (MTU) of the IP Tunnel. If this value is set to a larger Path MTU than the forwarding path of the IP datagram can support, IP fragmentation may occur. |
| INT mscVrIpTunnelMsepEncapType | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12.1.2 | INTEGER | read-write | This component only supports one type of encapsulation technique for IP tunnel: IP in IP (RFC 2003). ipInIp: As defined in RFC 2003, it can be used to encapsulated IP and IP payload only. |
| NUM mscVrIpTunnelMsepSharedDomainVirtualRouter | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12.1.3 | RowPointer | read-write | This attribute specifies the virtual router at the source endpoint of the IP tunnel. There must be a virtual router component provisioned with this instance value. |
| IP mscVrIpTunnelMsepSourceAddress | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.12.1.4 | IpAddress | read-write | This attribute specifies the IP address of the local end of the IP tunnel in the shared domain. There must be a logical interface with this IP address under the virtual router instance specified in the sharedDomainVirtualRouter attribute. This interface IP address cannot be an IP address defined under this IP tunnel protocol port. |
| mscVrIpTunnelMsepDstTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.834 | not-accessible | This attribute specifies the list of IP addresses mapping to each of the far end IP tunnel endpoints in the private domain. It must not match any of the IP interface addresses on the Virtual Router pointed to by the sharedDomainVirtualRouter attribute. | |
| mscVrIpTunnelMsepDstEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.834.1 | not-accessible | An entry in the mscVrIpTunnelMsepDstTable. | |
| IP mscVrIpTunnelMsepDstValue | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.834.1.1 | IpAddress | read-write | This variable represents both the value and the index for the mscVrIpTunnelMsepDstTable. |
| ROW mscVrIpTunnelMsepDstRowStatus | 1.3.6.1.4.1.562.36.2.1.100.6.18.11.834.1.2 | RowStatus | write-only | This variable is used to control the addition and deletion of individual values of the mscVrIpTunnelMsepDstTable. |
| mscVrIpTunnelStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.18.12 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpTunnelStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.18.12.1 | not-accessible | An entry in the mscVrIpTunnelStateTable. | |
| INT mscVrIpTunnelAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.18.12.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpTunnelOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.18.12.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpTunnelUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.18.12.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpProvTable | 1.3.6.1.4.1.562.36.2.1.100.6.100 | not-accessible | This group contains global attributes for IP. | |
| mscVrIpProvEntry | 1.3.6.1.4.1.562.36.2.1.100.6.100.1 | not-accessible | An entry in the mscVrIpProvTable. | |
| INT mscVrIpForwarding | 1.3.6.1.4.1.562.36.2.1.100.6.100.1.2 | INTEGER | read-write | This attribute indicates whether or not this VR is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this VR |
| U32 mscVrIpDefaultTtl | 1.3.6.1.4.1.562.36.2.1.100.6.100.1.3 | Unsigned32 | read-write | This attribute is the default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a Time- To-Live value is not supplied by the transport layer protocol. The value of this attribute deviates from the MIB requirement that it will always have a value of 255. |
| LIN mscVrIpCosPolicyAssignment | 1.3.6.1.4.1.562.36.2.1.100.6.100.1.4 | Link | read-write | This attribute specifies the default cosPolicyGroup component that is associated with the IpPort of every protocol port on the virtual router. An individual IpPort can override this default using its own cosPolicyAssignment attribute. If this attribute is empty, CoS policy groups are assigned to only those IP ports where the cosPolicyAssignment attribute under the IpPort component is non-empty. |
| mscVrIpStatsTable | 1.3.6.1.4.1.562.36.2.1.100.6.101 | not-accessible | This is the GROUP holding the struct which contains statistical attributes for IP. | |
| mscVrIpStatsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.101.1 | not-accessible | An entry in the mscVrIpStatsTable. | |
| C32 mscVrIpInReceives | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.1 | Counter32 | read-only | This is the number of input datagrams received from the interfaces, including those received in error . inReceives wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpInHdrErrors | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.2 | Counter32 | read-only | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. inHdrErrors wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpInAddrErrors | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.3 | Counter32 | read-only | The number of input datagrams discarded due to errors such as invalid address, unsupported address class. inAddrErrors wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpForwDatagrams | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.4 | Counter32 | read-only | The number of input datagrams for which this router was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. forwDatagrams wraps to zero if reaches it's maximum defined value. |
| C32 mscVrIpInUnknownProtos | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.5 | Counter32 | read-only | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol inUnknownProtos wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpInDiscards | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.6 | Counter32 | read-only | The number of input datagrams for which no problems were encountered to prevent their continued processing, but which were discarded due to the lack of buffers. This does not include any datagram discarded while awaiting for re-assembly. inDiscards wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpInDelivers | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.7 | Counter32 | read-only | The number of input datagrams successfully delivered to IP user- protocols (including ICMP). inDelivers wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpOutRequests | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.8 | Counter32 | read-only | The number of datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This sum does not include datagrams counted in ForwDatagrams. outRequests wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpOutDiscards | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.9 | Counter32 | read-only | The number of outbound datagrams that were discarded due to the lack of buffers. This sum also includes datagrams counted in forwDatagrams if any such packets met the discard criterion. outDiscards wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpOutNoRoutes | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.10 | Counter32 | read-only | The number of outbound datagrams discarded because no route could be found to transmit them to their destination. This counter includes any datagrams counted in forwDatagrams. outNoRoutes wraps to zero if reaches its maximum defined value. |
| U32 mscVrIpReasmTimeOut | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.11 | Unsigned32 | read-only | The maximum number of seconds, which received fragments are held while they are awaiting reassembly at this gateway. |
| C32 mscVrIpReasmReqds | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.12 | Counter32 | read-only | The number of the IP fragments received by this gateway which needed to be reassembled. reasmReqds wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpReasmOks | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.13 | Counter32 | read-only | The number of IP fragments successfully reassembled by this gateway. reasmOks wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpReasmFails | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.14 | Counter32 | read-only | The number of times this gateway is unabled to assemble IP-fragments for whatever reasons. reasmFails wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpFragOks | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.15 | Counter32 | read-only | The number of IP datagrams that have been successfully fragmented by this gateway. fragOks wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpFragFails | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.16 | Counter32 | read-only | The number of IP-fragments that have been discarded because they needed to be fragmented but could not be. For example, their Don't Fragment flag was set. fragFails wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpFragCreates | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.17 | Counter32 | read-only | This number of IP fragments that have been generated as a result of fragmentation by this gateway. fragCreates wraps to zero if reaches its maximum defined value. |
| C32 mscVrIpRoutingDiscards | 1.3.6.1.4.1.562.36.2.1.100.6.101.1.18 | Counter32 | read-only | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free -up buffer space for other routing entries. In this implementation, this number is always zero because IP never deletes a valid routing entry. |
| mscVrIpAdminControlTable | 1.3.6.1.4.1.562.36.2.1.100.6.102 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| mscVrIpAdminControlEntry | 1.3.6.1.4.1.562.36.2.1.100.6.102.1 | not-accessible | An entry in the mscVrIpAdminControlTable. | |
| INT mscVrIpSnmpAdminStatus | 1.3.6.1.4.1.562.36.2.1.100.6.102.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| mscVrIpStateTable | 1.3.6.1.4.1.562.36.2.1.100.6.104 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| mscVrIpStateEntry | 1.3.6.1.4.1.562.36.2.1.100.6.104.1 | not-accessible | An entry in the mscVrIpStateTable. | |
| INT mscVrIpAdminState | 1.3.6.1.4.1.562.36.2.1.100.6.104.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT mscVrIpOperationalState | 1.3.6.1.4.1.562.36.2.1.100.6.104.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT mscVrIpUsageState | 1.3.6.1.4.1.562.36.2.1.100.6.104.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| mscVrIpOperStatusTable | 1.3.6.1.4.1.562.36.2.1.100.6.107 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| mscVrIpOperStatusEntry | 1.3.6.1.4.1.562.36.2.1.100.6.107.1 | not-accessible | An entry in the mscVrIpOperStatusTable. | |
| INT mscVrIpSnmpOperStatus | 1.3.6.1.4.1.562.36.2.1.100.6.107.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| mscVrIpCtsTable | 1.3.6.1.4.1.562.36.2.1.100.6.394 | not-accessible | This attribute specifies the maximum number of entries that can exist in the IP local cache table on each LP. This attribute provides a way to control the resources allocated to the IP cache tables. The default cache table size is 3000 for an FP and 100 for a CP, is used if this attribute is not specified explicitly. The attribute value must be multiple of 100. | |
| mscVrIpCtsEntry | 1.3.6.1.4.1.562.36.2.1.100.6.394.1 | not-accessible | An entry in the mscVrIpCtsTable. | |
| I32 mscVrIpCtsIndex | 1.3.6.1.4.1.562.36.2.1.100.6.394.1.1 | Integer32 | not-accessible | This variable represents the mscVrIpCtsTable specific index for the mscVrIpCtsTable. |
| U32 mscVrIpCtsValue | 1.3.6.1.4.1.562.36.2.1.100.6.394.1.2 | Unsigned32 | read-write | This variable represents an individual value for the mscVrIpCtsTable. |
| ipMIB | 1.3.6.1.4.1.562.36.2.2.27 | |||
| ipGroup | 1.3.6.1.4.1.562.36.2.2.27.1 | |||
| ipGroupCA | 1.3.6.1.4.1.562.36.2.2.27.1.1 | |||
| ipGroupCA02 | 1.3.6.1.4.1.562.36.2.2.27.1.1.3 | |||
| ipGroupCA02A | 1.3.6.1.4.1.562.36.2.2.27.1.1.3.2 | |||
| ipCapabilities | 1.3.6.1.4.1.562.36.2.2.27.3 | |||
| ipCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.27.3.1 | |||
| ipCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.27.3.1.3 | |||
| ipCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.27.3.1.3.2 |
RFC description
Manages IP routing and virtual router configuration objects for Nortel MsCarrier MSC Passport carrier-class network elements.
Start monitoring Nortel/Alcatel-Lucent MainStreet Passport switch (logical port IP configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.