All MIBs › Nortel-MsCarrier-MscPassport-BaseRoutingMIB
Category: IP Routing & Forwarding, Nortel MsCarrier MscPassport
Description: Defines foundational SNMP routing management objects for IP and multiprotocol forwarding on Nortel MsCarrier MscPassport.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-BaseRoutingMIB?
This MIB is part of Nortel's MsCarrier MscPassport family, a carrier-grade multiservice switching/routing platform used in ATM/Frame Relay/IP carrier networks. It belongs to the carrier routing/multiprotocol switching technology area. Its data centers on routing configuration objects — provisioning tables for routing components, row-status-controlled creation/deletion of routing entries, storage type, and traffic-splitting region assignments — reflecting configuration/provisioning rather than raw performance counters. It supports monitoring of software/configuration status by exposing row status (active/notInService/notReady) for routing components and tandem traffic settings, letting an operator detect misconfigured or inactive routing instances. Opening this module in a Nortel-MsCarrier-MscPassport-BaseRoutingMIB MIB Browser makes the shared mscRtg naming convention across the routing-table family easy to trace. It is one of many Nortel MsCarrier MIB modules sharing the mscRtg/baseRoutingMIB naming convention and depends on Nortel's broader MscPassport MIB tree and the RowStatus textual convention from SNMPv2-TC. It is deployed in legacy carrier/service-provider networks still running Nortel Passport ATM/multiservice switching platforms.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-BaseRoutingMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel MsCarrier MscPassport carrier switching/routing platform
Monitoring Examples
An operator would poll mscRtgProvTable/mscRtgProvEntry to check routing component provisioning and mscRtgRowStatusTable/mscRtgRowStatusEntry's mscRtgRowStatus column, keyed by mscRtgIndex, to confirm each routing entry is active rather than stuck in notInService or notReady. The mscRtgTandemTraffic object would be checked to verify tandem traffic handling is configured as expected on a routing component. mscRtgSplittingRegionIdsTable/mscRtgSplittingRegionIdsEntry would be inspected to confirm traffic-splitting region assignments match the intended routing design, revealing misrouted traffic if a region ID is wrong.
What Can Be Monitored
- routing component row status
- routing provisioning entries
- tandem traffic configuration
- traffic-splitting region assignment
- routing component storage type
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiStringIndex | |
| DigitString | |
| FixedPoint1 | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscComponents | OBJECT-IDENTITY |
| mscPassportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| baseRoutingCapabilities | 1.3.6.1.4.1.562.36.2.2.18.3 | |||
| baseRoutingCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.18.3.1 | |||
| baseRoutingCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.18.3.1.3 | |||
| baseRoutingCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.18.3.1.3.2 | |||
| baseRoutingGroup | 1.3.6.1.4.1.562.36.2.2.18.1 | |||
| baseRoutingGroupCA | 1.3.6.1.4.1.562.36.2.2.18.1.1 | |||
| baseRoutingGroupCA02 | 1.3.6.1.4.1.562.36.2.2.18.1.1.3 | |||
| baseRoutingGroupCA02A | 1.3.6.1.4.1.562.36.2.2.18.1.1.3.2 | |||
| baseRoutingMIB | 1.3.6.1.4.1.562.36.2.2.18 | |||
| mscNpi | 1.3.6.1.4.1.562.36.2.1.43 | |||
| STR mscNpiComponentName | 1.3.6.1.4.1.562.36.2.1.43.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| mscNpiDna | 1.3.6.1.4.1.562.36.2.1.43.2 | |||
| STR mscNpiDnaComponentName | 1.3.6.1.4.1.562.36.2.1.43.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NUM mscNpiDnaDestinationName | 1.3.6.1.4.1.562.36.2.1.43.2.10.1.1 | RowPointer | read-only | This attribute holds the Component Name of the application to which the DNA belongs. |
| STR mscNpiDnaIndex | 1.3.6.1.4.1.562.36.2.1.43.2.1.1.10 | DigitString | not-accessible | This variable represents the index for the mscNpiDna tables. |
| mscNpiDnaInfoEntry | 1.3.6.1.4.1.562.36.2.1.43.2.10.1 | not-accessible | An entry in the mscNpiDnaInfoTable. | |
| mscNpiDnaInfoTable | 1.3.6.1.4.1.562.36.2.1.43.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Npi/ Dna/ Information This group of attributes contains the attributes for a DNA in the numbering plan. | |
| ROW mscNpiDnaRowStatus | 1.3.6.1.4.1.562.36.2.1.43.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNpiDna components. These components cannot be added nor deleted. |
| mscNpiDnaRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.43.2.1.1 | not-accessible | A single entry in the table represents a single mscNpiDna component. | |
| mscNpiDnaRowStatusTable | 1.3.6.1.4.1.562.36.2.1.43.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscNpiDna components. | |
| STO mscNpiDnaStorageType | 1.3.6.1.4.1.562.36.2.1.43.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNpiDna tables. |
| INT mscNpiIndex | 1.3.6.1.4.1.562.36.2.1.43.1.1.10 | INTEGER | not-accessible | This variable represents the index for the mscNpi tables. |
| ROW mscNpiRowStatus | 1.3.6.1.4.1.562.36.2.1.43.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscNpi components. These components cannot be added nor deleted. |
| mscNpiRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.43.1.1 | not-accessible | A single entry in the table represents a single mscNpi component. | |
| mscNpiRowStatusTable | 1.3.6.1.4.1.562.36.2.1.43.1 | not-accessible | This entry controls the addition and deletion of mscNpi components. | |
| mscNpiStatsEntry | 1.3.6.1.4.1.562.36.2.1.43.10.1 | not-accessible | An entry in the mscNpiStatsTable. | |
| mscNpiStatsTable | 1.3.6.1.4.1.562.36.2.1.43.10 | not-accessible | Npi/ Statistics This group of attributes contains the statistics kept for a particular numbering plan indicator. The only statistic present is the total number of DNAs provisioned for the numbering plan. | |
| STO mscNpiStorageType | 1.3.6.1.4.1.562.36.2.1.43.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscNpi tables. |
| U32 mscNpiTotalDnas | 1.3.6.1.4.1.562.36.2.1.43.10.1.1 | Unsigned32 | read-only | This attribute holds the total number of Dnas that are in the numbering plan. If this attribute is displayed in provisioning mode, the number includes the Dnas that have been added/deleted in that provisioning session, otherwise the number only includes the Dnas that have been activated. |
| mscRtg | 1.3.6.1.4.1.562.36.2.1.40 | |||
| STR mscRtgComponentName | 1.3.6.1.4.1.562.36.2.1.40.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON mscRtgIndex | 1.3.6.1.4.1.562.36.2.1.40.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscRtg tables. |
| mscRtgProvEntry | 1.3.6.1.4.1.562.36.2.1.40.12.1 | not-accessible | An entry in the mscRtgProvTable. | |
| mscRtgProvTable | 1.3.6.1.4.1.562.36.2.1.40.12 | not-accessible | This group contains the provisioning data for the routing system. | |
| ROW mscRtgRowStatus | 1.3.6.1.4.1.562.36.2.1.40.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscRtg components. These components can be added. |
| mscRtgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.40.1.1 | not-accessible | A single entry in the table represents a single mscRtg component. | |
| mscRtgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.40.1 | not-accessible | This entry controls the addition and deletion of mscRtg components. | |
| mscRtgSplittingRegionIdsEntry | 1.3.6.1.4.1.562.36.2.1.40.407.1 | not-accessible | An entry in the mscRtgSplittingRegionIdsTable. | |
| ROW mscRtgSplittingRegionIdsRowStatus | 1.3.6.1.4.1.562.36.2.1.40.407.1.2 | RowStatus | write-only | This variable is used to control the addition and deletion of individual values of the mscRtgSplittingRegionIdsTable. |
| mscRtgSplittingRegionIdsTable | 1.3.6.1.4.1.562.36.2.1.40.407 | not-accessible | This attribute is used only when splitting or merging existing topology regions. It specifies which topology regions are in a migration status. A node will only exchange topological information with a connected node under the following conditions: (i) the nodes belong to the same topology region, (ii) one of the nodes is provisioned with the default regionId of 0, (iii) the connected node's splittingRegionIds attribute is provisioned to contain the local node's regionId value and the local node's splittingRegionIds is also provisioned to contain the connected node's regionId value when both two nodes' regionIds are different and non-zero. When this attribute is used during migration of regions, values for the attribute are normally the old and new regionIds for the node. Use of this attribute makes it possible to migrate existing topology regions in the following cases: (i) splitting a topology region into two without isolating a node, (ii) merging two different topology regions into one without introducing an extra topological barrier. The attribute should be cleaned when all migration activities are complete. At this point, the region boundary will take effect. | |
| I32 mscRtgSplittingRegionIdsValue | 1.3.6.1.4.1.562.36.2.1.40.407.1.1 | Integer32 | read-write | This variable represents both the value and the index for the mscRtgSplittingRegionIdsTable. |
| STO mscRtgStorageType | 1.3.6.1.4.1.562.36.2.1.40.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscRtg tables. |
| INT mscRtgTandemTraffic | 1.3.6.1.4.1.562.36.2.1.40.12.1.1 | INTEGER | read-write | This attribute specifies whether tandem traffic is permitted through the node. Tandem traffic is traffic which arrives at the node on a trunk and leaves the node on a trunk. Traffic to or from a gateway (internal or external) is not affected by the setting of this attribute. The default value of this attribute is allowed, which permits tandem traffic to be routed through the node. When this attribute is set to denied, DPN, VNS, and PORS traffic are not permitted to tandem through the node. Changing this attribute has no effect on PORS calls which were set up before the change. These calls can be manually forced to reroute using the new setting by clearing the calls or locking the trunks on which they are routed. |
| mscRtgTop | 1.3.6.1.4.1.562.36.2.1.40.5 | |||
| STR mscRtgTopComponentName | 1.3.6.1.4.1.562.36.2.1.40.5.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| C32 mscRtgTopControlBytesRx | 1.3.6.1.4.1.562.36.2.1.40.5.11.1.2 | Counter32 | read-only | This attribute shows the total number of topology routing control packet bytes received by this node from other Passport nodes in the network. |
| C32 mscRtgTopControlBytesTx | 1.3.6.1.4.1.562.36.2.1.40.5.11.1.4 | Counter32 | read-only | This attribute shows the total number of topology routing control packet bytes sent by this node to other Passport nodes in the network. |
| C32 mscRtgTopControlPktRx | 1.3.6.1.4.1.562.36.2.1.40.5.11.1.1 | Counter32 | read-only | This attribute shows the total number of topology routing control packets which have been received by this node from other Passport nodes in the network. |
| C32 mscRtgTopControlPktTx | 1.3.6.1.4.1.562.36.2.1.40.5.11.1.3 | Counter32 | read-only | This attribute shows the total number of topology routing control packets which have been sent by this node to other Passport nodes in the network. |
| NON mscRtgTopIndex | 1.3.6.1.4.1.562.36.2.1.40.5.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscRtgTop tables. |
| mscRtgTopNode | 1.3.6.1.4.1.562.36.2.1.40.5.2 | |||
| STR mscRtgTopNodeComponentName | 1.3.6.1.4.1.562.36.2.1.40.5.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STR mscRtgTopNodeIndex | 1.3.6.1.4.1.562.36.2.1.40.5.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscRtgTopNode tables. |
| mscRtgTopNodeLg | 1.3.6.1.4.1.562.36.2.1.40.5.2.2 | |||
| STR mscRtgTopNodeLgComponentName | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 mscRtgTopNodeLgDelayMetric | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.10.1.1 | Unsigned32 | read-only | This attribute specifies the outbound cost to forward packets across the trunk group for a delay class of service. It represents the trunk in the trunk group with the lowest round trip delay. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the delay class of service. |
| STR mscRtgTopNodeLgIndex | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscRtgTopNodeLg tables. |
| mscRtgTopNodeLgLnnEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.235.1 | not-accessible | An entry in the mscRtgTopNodeLgLnnTable. | |
| mscRtgTopNodeLgLnnTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.235 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute is a list of integers which specify the logical network numbers supported by the trunk group. Each of these numbers corresponds with a particular instance of network protocol supported on this switch. LNN 0 is present on all trunks by default to allow Passport control traffic on the trunk. | |
| I32 mscRtgTopNodeLgLnnValue | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.235.1.1 | Integer32 | read-only | This variable represents both the value and the index for the mscRtgTopNodeLgLnnTable. |
| mscRtgTopNodeLgOperEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.10.1 | not-accessible | An entry in the mscRtgTopNodeLgOperTable. | |
| mscRtgTopNodeLgOperTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Operational This group contains the operational data stored and maintained by TrunkGroup component for each trunk group attached to a node in the Passport network. | |
| ROW mscRtgTopNodeLgRowStatus | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscRtgTopNodeLg components. These components cannot be added nor deleted. |
| mscRtgTopNodeLgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1.1 | not-accessible | A single entry in the table represents a single mscRtgTopNodeLg component. | |
| mscRtgTopNodeLgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscRtgTopNodeLg components. | |
| STO mscRtgTopNodeLgStorageType | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscRtgTopNodeLg tables. |
| U32 mscRtgTopNodeLgTputMetric | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.10.1.2 | Unsigned32 | read-only | This attribute specifies the outbound cost to forward packets across the trunk group for a throughput class of service. It is computed from the combined speed of each link in the trunk group. A low outbound cost is preferable to a higher value as it is associated with higher speed facilities. A metric value of 2147483647 means that the trunk group is unusable for the throughput class of service. |
| mscRtgTopNodeLgTrkObj | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2 | |||
| STR mscRtgTopNodeLgTrkObjComponentName | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| U32 mscRtgTopNodeLgTrkObjCustomerParameter | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.7 | Unsigned32 | read-only | This attribute indicates the customer defined parameter for the trunk. Its value, a number from zero(0) to seven(7), is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary PLC attribute, requiredCustomerParameter, also has a value from zero(0) to seven(7). The Route Selector does not consider trunks whose PA customerParameter is greater than the requiredCustomParameter of the path. |
| U32 mscRtgTopNodeLgTrkObjFarEndTrmLkInstance | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.8 | Unsigned32 | read-only | This attribute indicates identification of the corresponding trunk providing the reverse direction of transmission. |
| I32 mscRtgTopNodeLgTrkObjIndex | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscRtgTopNodeLgTrkObj tables. |
| G32 mscRtgTopNodeLgTrkObjMaxReservableBwOut | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.1 | Gauge32 | read-only | This attribute displays trunk bandwidth which can be used for reservations on behalf of connections requiring path oriented routing. This bandwidth is displayed in bit/s and has been calculated by concerned trunk path administrator from the trunk bandwidth and from the percentage of trunk bandwidth provisioned for reservations by PORS. |
| mscRtgTopNodeLgTrkObjOperEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1 | not-accessible | An entry in the mscRtgTopNodeLgTrkObjOperTable. | |
| mscRtgTopNodeLgTrkObjOperTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Trunk/ Operational This group contains the operational data stored and maintained by TplPorTrunk component. | |
| ROW mscRtgTopNodeLgTrkObjRowStatus | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscRtgTopNodeLgTrkObj components. These components cannot be added nor deleted. |
| mscRtgTopNodeLgTrkObjRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1.1 | not-accessible | A single entry in the table represents a single mscRtgTopNodeLgTrkObj component. | |
| mscRtgTopNodeLgTrkObjRowStatusTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscRtgTopNodeLgTrkObj components. | |
| STO mscRtgTopNodeLgTrkObjStorageType | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscRtgTopNodeLgTrkObj tables. |
| OCT mscRtgTopNodeLgTrkObjSupportedTrafficTypes | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.5 | OCTET STRING | read-only | This attribute indicates the type of traffic that can be transmitted on the trunk. There are eight(8) possible traffic types, and the trunk can transmit all of them if desired. The voice, data and video traffic types are defined, and five(5) other traffic types can be defined in concerned trunk path administrator. This attribute is used in the route selection process to limit the route to trunks that support the traffic to be carried by the path. Description of bits: voice(0) data(1) video(2) trafficType1(3) trafficType2(4) trafficType3(5) trafficType4(6) trafficType5(7) |
| U32 mscRtgTopNodeLgTrkObjTrunkCost | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.2 | Unsigned32 | read-only | This attribute displays trunk cost metric provisioned as trunkCost attribute of a concerned trunk path administrator. |
| U32 mscRtgTopNodeLgTrkObjTrunkDelay | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.3 | Unsigned32 | read-only | This attribute displays one-directional trunk delay measured by trunk during staging. This is half (rounded down to an integer) of delay displayable by attribute of ID aTrmLinkDelay_c. |
| U32 mscRtgTopNodeLgTrkObjTrunkSecurity | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.4 | Unsigned32 | read-only | This attribute displays trunk security metric provisioned as trunkSecurity attribute of a concerned trunk path administrator. |
| INT mscRtgTopNodeLgTrkObjTrunkType | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.10.1.6 | INTEGER | read-only | This attribute lists the type of the trunk. There can be up to eight(8) types of trunks. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining types that can be defined by the network administration. The set of allowed trunk types for a path is indicated in the permittedTrunkType attribute of the PLC. When selecting a route, PORS only chooses trunks whose PA trunkType are in the permittedTrunkTypes set of the path. |
| mscRtgTopNodeLgTrkObjUnresEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.234.1 | not-accessible | An entry in the mscRtgTopNodeLgTrkObjUnresTable. | |
| INT mscRtgTopNodeLgTrkObjUnresSetupPriorityIndex | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.234.1.1 | INTEGER | not-accessible | This variable represents the next to last index for the mscRtgTopNodeLgTrkObjUnresTable. |
| mscRtgTopNodeLgTrkObjUnresTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.234 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays a table. In the first row there are setup priorities. In the second row there are numerators of parts of unreserved bandwidth corresponding to setup priority 0 (first column) through 4 (fifth column). The denominator is 255. | |
| I32 mscRtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.234.1.2 | Integer32 | not-accessible | This variable represents the final index for the mscRtgTopNodeLgTrkObjUnresTable. |
| U32 mscRtgTopNodeLgTrkObjUnresValue | 1.3.6.1.4.1.562.36.2.1.40.5.2.2.2.234.1.3 | Unsigned32 | read-only | This variable represents an individual value for the mscRtgTopNodeLgTrkObjUnresTable. |
| U32 mscRtgTopNodeNodeId | 1.3.6.1.4.1.562.36.2.1.40.5.2.10.1.1 | Unsigned32 | read-only | The nodeId is a number that uniquely identifies the Node component instance in the Passport network. It is the identifier used in the routing control packets sent by this node to other Passport nodes in the network. The nodeId, for each node in the network, is learned from the Passport routing protocol packets. |
| mscRtgTopNodeOperEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.10.1 | not-accessible | An entry in the mscRtgTopNodeOperTable. | |
| mscRtgTopNodeOperTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ Operational This group contains operational data about each node in the Passport network and its connectivity to its neighbours. | |
| ROW mscRtgTopNodeRowStatus | 1.3.6.1.4.1.562.36.2.1.40.5.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscRtgTopNode components. These components cannot be added nor deleted. |
| mscRtgTopNodeRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.40.5.2.1.1 | not-accessible | A single entry in the table represents a single mscRtgTopNode component. | |
| mscRtgTopNodeRowStatusTable | 1.3.6.1.4.1.562.36.2.1.40.5.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscRtgTopNode components. | |
| STO mscRtgTopNodeStorageType | 1.3.6.1.4.1.562.36.2.1.40.5.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscRtgTopNode tables. |
| ROW mscRtgTopRowStatus | 1.3.6.1.4.1.562.36.2.1.40.5.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscRtgTop components. These components cannot be added nor deleted. |
| mscRtgTopRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.40.5.1.1 | not-accessible | A single entry in the table represents a single mscRtgTop component. | |
| mscRtgTopRowStatusTable | 1.3.6.1.4.1.562.36.2.1.40.5.1 | not-accessible | This entry controls the addition and deletion of mscRtgTop components. | |
| mscRtgTopStatsEntry | 1.3.6.1.4.1.562.36.2.1.40.5.11.1 | not-accessible | An entry in the mscRtgTopStatsTable. | |
| mscRtgTopStatsTable | 1.3.6.1.4.1.562.36.2.1.40.5.11 | not-accessible | Rtg Top Statistics This group contains operational data stored and maintained by this component for recording statistics of Passport routing control packets which have been sent or received by Topology. | |
| STO mscRtgTopStorageType | 1.3.6.1.4.1.562.36.2.1.40.5.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscRtgTop tables. |
| mscTrm | 1.3.6.1.4.1.562.36.2.1.41 | |||
| STR mscTrmComponentName | 1.3.6.1.4.1.562.36.2.1.41.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| NON mscTrmIndex | 1.3.6.1.4.1.562.36.2.1.41.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTrm tables. |
| mscTrmLg | 1.3.6.1.4.1.562.36.2.1.41.3 | |||
| STR mscTrmLgComponentName | 1.3.6.1.4.1.562.36.2.1.41.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STR mscTrmLgIndex | 1.3.6.1.4.1.562.36.2.1.41.3.1.1.10 | AsciiStringIndex | not-accessible | This variable represents the index for the mscTrmLg tables. |
| mscTrmLgLk | 1.3.6.1.4.1.562.36.2.1.41.3.2 | |||
| STR mscTrmLgLkComponentName | 1.3.6.1.4.1.562.36.2.1.41.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| G32 mscTrmLgLkDelay | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.3 | Gauge32 | read-only | This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead. |
| NUM mscTrmLgLkDelayUsec | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.6 | FixedPoint1 | read-only | This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead. |
| mscTrmLgLkDiscardCongestedEntry | 1.3.6.1.4.1.562.36.2.1.41.3.2.280.1 | not-accessible | An entry in the mscTrmLgLkDiscardCongestedTable. | |
| INT mscTrmLgLkDiscardCongestedIndex | 1.3.6.1.4.1.562.36.2.1.41.3.2.280.1.1 | INTEGER | not-accessible | This variable represents the mscTrmLgLkDiscardCongestedTable specific index for the mscTrmLgLkDiscardCongestedTable. |
| mscTrmLgLkDiscardCongestedTable | 1.3.6.1.4.1.562.36.2.1.41.3.2.280 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached. | |
| C32 mscTrmLgLkDiscardCongestedValue | 1.3.6.1.4.1.562.36.2.1.41.3.2.280.1.2 | Counter32 | read-only | This variable represents an individual value for the mscTrmLgLkDiscardCongestedTable. |
| C32 mscTrmLgLkFciSet | 1.3.6.1.4.1.562.36.2.1.41.3.2.11.1.1 | Counter32 | read-only | This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached. |
| mscTrmLgLkFwdStatsEntry | 1.3.6.1.4.1.562.36.2.1.41.3.2.11.1 | not-accessible | An entry in the mscTrmLgLkFwdStatsTable. | |
| mscTrmLgLkFwdStatsTable | 1.3.6.1.4.1.562.36.2.1.41.3.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link. | |
| I32 mscTrmLgLkIndex | 1.3.6.1.4.1.562.36.2.1.41.3.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscTrmLgLk tables. |
| NUM mscTrmLgLkLinkComponentName | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.5 | RowPointer | read-only | This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system. |
| U32 mscTrmLgLkMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link. |
| mscTrmLgLkOperEntry | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1 | not-accessible | An entry in the mscTrmLgLkOperTable. | |
| mscTrmLgLkOperTable | 1.3.6.1.4.1.562.36.2.1.41.3.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link. | |
| C32 mscTrmLgLkOverflowAttempts | 1.3.6.1.4.1.562.36.2.1.41.3.2.11.1.2 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached. |
| C32 mscTrmLgLkPathOverflowAttempts | 1.3.6.1.4.1.562.36.2.1.41.3.2.11.1.3 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached. |
| ROW mscTrmLgLkRowStatus | 1.3.6.1.4.1.562.36.2.1.41.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTrmLgLk components. These components cannot be added nor deleted. |
| mscTrmLgLkRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.41.3.2.1.1 | not-accessible | A single entry in the table represents a single mscTrmLgLk component. | |
| mscTrmLgLkRowStatusTable | 1.3.6.1.4.1.562.36.2.1.41.3.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTrmLgLk components. | |
| INT mscTrmLgLkStatus | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.1 | INTEGER | read-only | This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems. |
| STO mscTrmLgLkStorageType | 1.3.6.1.4.1.562.36.2.1.41.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTrmLgLk tables. |
| G32 mscTrmLgLkThroughput | 1.3.6.1.4.1.562.36.2.1.41.3.2.10.1.2 | Gauge32 | read-only | This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth. |
| mscTrmLgLNN | 1.3.6.1.4.1.562.36.2.1.41.3.3 | |||
| NUM mscTrmLgLNNAddressPlanComponentName | 1.3.6.1.4.1.562.36.2.1.41.3.3.10.1.2 | RowPointer | read-only | This attribute indicates the component name of the address plan which owns the logical network number of this component. |
| STR mscTrmLgLNNComponentName | 1.3.6.1.4.1.562.36.2.1.41.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| I32 mscTrmLgLNNIndex | 1.3.6.1.4.1.562.36.2.1.41.3.3.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscTrmLgLNN tables. |
| INT mscTrmLgLNNLinkType | 1.3.6.1.4.1.562.36.2.1.41.3.3.10.1.1 | INTEGER | read-only | This attribute indicates how the LNN is transported over the link group. It can be one of three types: trunk - the LNN is supported by Topology over a Passport to Passport link internal gateway - the LNN is supported by an address plan (but not Topology) over a Passport to Passport link external gateway - the LNN is supported by an address plan (but not Topology) over a Passport to non-Passport link |
| mscTrmLgLNNOperEntry | 1.3.6.1.4.1.562.36.2.1.41.3.3.10.1 | not-accessible | An entry in the mscTrmLgLNNOperTable. | |
| mscTrmLgLNNOperTable | 1.3.6.1.4.1.562.36.2.1.41.3.3.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lg/ LNN/ Operational This group of attributes is the information associated with an address plan. | |
| ROW mscTrmLgLNNRowStatus | 1.3.6.1.4.1.562.36.2.1.41.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTrmLgLNN components. These components cannot be added nor deleted. |
| mscTrmLgLNNRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.41.3.3.1.1 | not-accessible | A single entry in the table represents a single mscTrmLgLNN component. | |
| mscTrmLgLNNRowStatusTable | 1.3.6.1.4.1.562.36.2.1.41.3.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTrmLgLNN components. | |
| STO mscTrmLgLNNStorageType | 1.3.6.1.4.1.562.36.2.1.41.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTrmLgLNN tables. |
| ROW mscTrmLgRowStatus | 1.3.6.1.4.1.562.36.2.1.41.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTrmLg components. These components cannot be added nor deleted. |
| mscTrmLgRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.41.3.1.1 | not-accessible | A single entry in the table represents a single mscTrmLg component. | |
| mscTrmLgRowStatusTable | 1.3.6.1.4.1.562.36.2.1.41.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTrmLg components. | |
| STO mscTrmLgStorageType | 1.3.6.1.4.1.562.36.2.1.41.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTrmLg tables. |
| mscTrmLk | 1.3.6.1.4.1.562.36.2.1.41.2 | |||
| STR mscTrmLkComponentName | 1.3.6.1.4.1.562.36.2.1.41.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| G32 mscTrmLkDelay | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.3 | Gauge32 | read-only | This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If an override delay is specified, it will be used instead. |
| NUM mscTrmLkDelayUsec | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.6 | FixedPoint1 | read-only | This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The value of this attribute is a function of the percentage of reserved path-oriented bandwidth and takes a maximum value of 1500 msec for 100% path-oriented trunks. If a delay override is specified, it will be used instead. |
| mscTrmLkDiscardCongestedEntry | 1.3.6.1.4.1.562.36.2.1.41.2.280.1 | not-accessible | An entry in the mscTrmLkDiscardCongestedTable. | |
| INT mscTrmLkDiscardCongestedIndex | 1.3.6.1.4.1.562.36.2.1.41.2.280.1.1 | INTEGER | not-accessible | This variable represents the mscTrmLkDiscardCongestedTable specific index for the mscTrmLkDiscardCongestedTable. |
| mscTrmLkDiscardCongestedTable | 1.3.6.1.4.1.562.36.2.1.41.2.280 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This attribute is a vector with three entries. Each entry corresponds to a discard priority of the packet. The first entry represents the discard count of packets with discard priority 1, the second entry discard priority 2, and the third entry discard priority 3. Each entry (counter) wraps around to zero when the maximum value is reached. | |
| C32 mscTrmLkDiscardCongestedValue | 1.3.6.1.4.1.562.36.2.1.41.2.280.1.2 | Counter32 | read-only | This variable represents an individual value for the mscTrmLkDiscardCongestedTable. |
| C32 mscTrmLkFciSet | 1.3.6.1.4.1.562.36.2.1.41.2.11.1.1 | Counter32 | read-only | This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the maximum value is reached. |
| mscTrmLkFwdStatsEntry | 1.3.6.1.4.1.562.36.2.1.41.2.11.1 | not-accessible | An entry in the mscTrmLkFwdStatsTable. | |
| mscTrmLkFwdStatsTable | 1.3.6.1.4.1.562.36.2.1.41.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link. | |
| I32 mscTrmLkIndex | 1.3.6.1.4.1.562.36.2.1.41.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscTrmLk tables. |
| NUM mscTrmLkLinkComponentName | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.5 | RowPointer | read-only | This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system. |
| U32 mscTrmLkMaxTxUnit | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.4 | Unsigned32 | read-only | This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link. |
| mscTrmLkOperEntry | 1.3.6.1.4.1.562.36.2.1.41.2.10.1 | not-accessible | An entry in the mscTrmLkOperTable. | |
| mscTrmLkOperTable | 1.3.6.1.4.1.562.36.2.1.41.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link. | |
| C32 mscTrmLkOverflowAttempts | 1.3.6.1.4.1.562.36.2.1.41.2.11.1.2 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value loadspreading. This counter wraps around to zero when the maximum value is reached. |
| C32 mscTrmLkPathOverflowAttempts | 1.3.6.1.4.1.562.36.2.1.41.2.11.1.3 | Counter32 | read-only | This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached. |
| ROW mscTrmLkRowStatus | 1.3.6.1.4.1.562.36.2.1.41.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTrmLk components. These components cannot be added nor deleted. |
| mscTrmLkRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.41.2.1.1 | not-accessible | A single entry in the table represents a single mscTrmLk component. | |
| mscTrmLkRowStatusTable | 1.3.6.1.4.1.562.36.2.1.41.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTrmLk components. | |
| INT mscTrmLkStatus | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.1 | INTEGER | read-only | This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has requested to join the routing systems. online- The link is active and has joined one or more routing systems. |
| STO mscTrmLkStorageType | 1.3.6.1.4.1.562.36.2.1.41.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTrmLk tables. |
| G32 mscTrmLkThroughput | 1.3.6.1.4.1.562.36.2.1.41.2.10.1.2 | Gauge32 | read-only | This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed override is specified, it is used instead. The 'throughput' value can be exceeded by connectionless traffic whenever path-oriented traffic is not using it's reserved bandwidth. |
| ROW mscTrmRowStatus | 1.3.6.1.4.1.562.36.2.1.41.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTrm components. These components cannot be added nor deleted. |
| mscTrmRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.41.1.1 | not-accessible | A single entry in the table represents a single mscTrm component. | |
| mscTrmRowStatusTable | 1.3.6.1.4.1.562.36.2.1.41.1 | not-accessible | This entry controls the addition and deletion of mscTrm components. | |
| STO mscTrmStorageType | 1.3.6.1.4.1.562.36.2.1.41.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTrm tables. |
RFC description
Manages routing configuration and statistics for Nortel MsCarrier MSC Passport telecommunications equipment.
Start monitoring Nortel MsCarrier MscPassport carrier switching/routing platform (base routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.