Nortel-MsCarrier-MscPassport-LogicalProcessorMIB :: mscLpSdhUnusableTxClockRefAlarm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-LogicalProcessorMIB › mscLpSdhUnusableTxClockRefAlarm

mscLpSdhUnusableTxClockRefAlarm

Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpSdhUnusableTxClockRefAlarm

OID (numeric): 1.3.6.1.4.1.562.36.2.1.12.15.16.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute displays whether an Unusable Transmit Clock Reference (UTCR) alarm state has been entered. A UTCR alarm state is entered when a Sonet/Sdh port provisioned to act as a transmit clock reference has received the code 'do not use for synchronization' in the S1 byte (in the SONET/ SDH line overhead) for 2.5 +/- 0.5 seconds. The condition is cleared after not detecting the 'do not use for synchronization' code for a period of 10 +/- 0.5 seconds or when the port is no longer provisioned to act as a transmit clock reference. A port is acting as a transmit clock reference if it is provisioned with a) a clockingSource of line, or b) it has been provisioned as a primaryReference, secondaryReference or tertiaryReference in the NetworkSynchronization component. The unusableTxClockRefAlarm attribute is always set to off when the component has been locked and left offline.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.15.16.1.7
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpSdhUnusableTxClockRefAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.12.15.16.1.7.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpSdhUnusableTxClockRefAlarm.1

Start monitoring Nortel MsCarrier MscPassport switch (logical processor/card redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-LogicalProcessorMIB::mscLpSdhUnusableTxClockRefAlarm OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (logical processor/card redundancy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.12mscLpNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.15mscLpSdhNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.15.16mscLpSdhOperTableNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.15.16.1mscLpSdhOperEntryNortel-MsCarrier-MscPassport-LogicalProcessorMIB
1.3.6.1.4.1.562.36.2.1.12.15.16.1.7mscLpSdhUnusableTxClockRefAlarmNortel-MsCarrier-MscPassport-LogicalProcessorMIB