IJ8060-MIB :: sleep_mode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsIJ8060-MIBsleep_mode

sleep_mode

Module: IJ8060-MIB

OID (symbolic): IJ8060-MIB::sleep_mode

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sleep mode. Setting SLEEP-MODE to eTrue causes the device to go into sleep mode. Additional information: This object returns eTrue if the device is in energy saving sleep mode, otherwise it returns eFalse. Setting this object to eTrue while the printer is awake will not change the printer's current state and will return status. NOTE: This object should behave this way when the printer does not have an instant-on fuser. Setting this object to eTrue while printer is already in Sleep Mode will not change the printer's current state and will return status. Setting this object to eFalse while printer is already awake will not change the printer's current state and will return status. Setting this object to eFalse while the printer is asleep causes the device to wake up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2
snmpwalk -v2c -c public <target> IJ8060-MIB::sleep_mode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2.1
snmpget -v2c -c public <target> IJ8060-MIB::sleep_mode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2.1 i <value>

Start monitoring HP-compatible printer/multifunction device (IJ8060 print engine) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IJ8060-MIB::sleep_mode OID value, configure state conditions and alerts, and monitor any HP-compatible printer/multifunction device (IJ8060 print engine) from a single console.

OID Breakdown

Upper-level ancestors (15 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1deviceCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.1systemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.1.1settings_systemCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2sleep_modeIJ8060-MIB