GIGE-MIB

All MIBs › GIGE-MIB

Organization: SAGEM-Tolbiac drd/ddp/tmhd

Last Updated: 2002-05-22

Category: Optical and WDM

Description: SAGEM Gigabit Ethernet MIB for managing GigE interface configuration, performance monitoring, and error statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GIGE-MIB?

GIGE-MIB is a SAGEM vendor MIB specific to the Gigabit Ethernet (GigE) module of the Adr2500c device, an access/multiplexing platform. It is intended to expose configuration and performance data for that GigE interface module, such as port configuration and traffic/error statistics, per its short description. In terms of hardware/software status, it would be used to confirm the GigE module's link and port state and monitor error counters that reveal a failing physical interface. No specific external MIB dependency is evident from the available description, though it likely complements IF-MIB for standard interface counters on the same port. It is deployed on SAGEM Adr2500c access/multiplexer chassis wherever a Gigabit Ethernet uplink or module is installed, and a GIGE-MIB download is available for administrators who need to load it directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GIGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAGEM Adr2500c access/multiplexer with GigE module

Monitoring Examples

No object or table names were captured for this module, so a concrete polling example cannot be safely constructed without inventing OIDs; in general terms an administrator would use this MIB to check the GigE module's port configuration and error/performance counters to catch a degraded or failing Gigabit Ethernet interface on the Adr2500c.

What Can Be Monitored

GigE port configuration
GigE interface performance/error counters
GigE link status

Imported Objects

From ADR2500C-MIB

adr2500c

MODULE-IDENTITY

From EQUIPMENT-MIB

SagemBoolean
Severity

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
PhysAddress

How to Use in IPNetwork Monitor

Example using gfpHCInPkts OID:

Select an SAGEM Adr2500c access/multiplexer with GigE module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type gfpHCInPkts into the Find box to locate it in the OID tree, then select it and click OK. The total number of packets received on the Gfp interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT cosBwRRatioMax	1.3.6.1.4.1.1038.17.10.41.1.6	INTEGER	read-write	When the qosBwREnable field is set to True, then this field allows to configure the maximum percentage of SDH throughput which can be booked up for the CoS
INT cosBwRRatioMin	1.3.6.1.4.1.1038.17.10.41.1.5	INTEGER	read-write	When the qosBwREnable field is set to True, then this field allows to configure the guaranted percentage of SDH throughput which must be booked up for the CoS
STR cosDefinition	1.3.6.1.4.1.1038.17.10.41.1.4	DisplayString	read-only	This optional textual field brings some precisions about the CoS configuration.
cosEntry	1.3.6.1.4.1.1038.17.10.41.1		not-accessible	A particular CoS of the equipment.
C64 cosHCInCCDiscards	1.3.6.1.4.1.1038.17.10.41.1.11	Counter64	read-only	The number of CosId packets received on the GE interface which were discarded by RED/WRED/BandWidthReservation to prevent from congestion.
C64 cosHCInOctets	1.3.6.1.4.1.1038.17.10.41.1.7	Counter64	read-only	The total number of octets received on the GE interface (excluding framing characters preambule and sfd) and belonging to a CosId packet
C64 cosHCInPkts	1.3.6.1.4.1.1038.17.10.41.1.9	Counter64	read-only	The total number of octets received on the GE interface (excluding framing characters preambule and sfd) and belonging to a CosId packet
C64 cosHCOutOctets	1.3.6.1.4.1.1038.17.10.41.1.8	Counter64	read-only	The total number of octets transmitted out of the Wan interface (excluding framing characters preambule and sfd) and belonging to a CosId paket
C64 cosHCOutPkts	1.3.6.1.4.1.1038.17.10.41.1.10	Counter64	read-only	The total number of octets transmitted out of the Wan interface (excluding framing characters preambule and sfd) and belonging to a CosId paket
COS cosId	1.3.6.1.4.1.1038.17.10.41.1.3	CosId	read-only	This field identify the class of Service.
INT cosIndex	1.3.6.1.4.1.1038.17.10.41.1.1	INTEGER	read-only	A unique value which identify a particular CoS of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are taken between 1 and cosNumber.
INT cosNumber	1.3.6.1.4.1.1038.17.10.40	INTEGER	read-only	Number of Class of Service set in equipment = number of entries in cosTable = qosNumber * qosClassNumber
INT cosQosId	1.3.6.1.4.1.1038.17.10.41.1.2	INTEGER	read-only	This field allows to identify which QoS this Class is belonging. Its values must match to qosIndex.
cosTable	1.3.6.1.4.1.1038.17.10.41		not-accessible	List of CoS in equipment.
INT gfpAdminStatus	1.3.6.1.4.1.1038.17.10.51.1.15	INTEGER	read-write	The desired state of the gfp port. The testing(3) state indicates that no operational packets can be passed.
gfpEntry	1.3.6.1.4.1.1038.17.10.51.1		not-accessible	A particular gfp port of the equipment.
GFP gfpFailure	1.3.6.1.4.1.1038.17.10.51.1.18	GfpFailure	read-only	Active failures on channel
SEV gfpFDSC	1.3.6.1.4.1.1038.17.10.51.1.22	Severity	read-write	Severity associated with Frame Delineation State Change failure for gfp port.
C64 gfpHCFCSErrors	1.3.6.1.4.1.1038.17.10.51.1.7	Counter64	read-only	The number of frames received on the Gfp interface that are an integral number of octets in length but do not pass the FCS check.
C64 gfpHCInCorrectedPkts	1.3.6.1.4.1.1038.17.10.51.1.6	Counter64	read-only	The total number of mismatched packets received on the Gfp interface that have been corrected.
C64 gfpHCInCorruptedPkts	1.3.6.1.4.1.1038.17.10.51.1.4	Counter64	read-only	The total number of mismatched packets received on the Gfp interface.
C64 gfpHCInErrors	1.3.6.1.4.1.1038.17.10.51.1.5	Counter64	read-only	The total number of mismatched packets that have been discarded.
C64 gfpHCInIdlePkts	1.3.6.1.4.1.1038.17.10.51.1.3	Counter64	read-only	The total number of Idle frames received on the Gfp interface
C64 gfpHCInOctets	1.3.6.1.4.1.1038.17.10.51.1.8	Counter64	read-only	The total number of Octets received on the Gfp interface
C64 gfpHCInPktsEx	1.3.6.1.4.1.1038.17.10.51.1.2	Counter64	read-only	The total number of packets received on the Gfp interface
C64 gfpHCOutIdlePkts	1.3.6.1.4.1.1038.17.10.51.1.10	Counter64	read-only	The total number of Idle frame transmitted out of the Gfp interface
C64 gfpHCOutOctets	1.3.6.1.4.1.1038.17.10.51.1.11	Counter64	read-only	The total number of packets transmitted out of the Gfp interface
C64 gfpHCOutPkts	1.3.6.1.4.1.1038.17.10.51.1.9	Counter64	read-only	The total number of packets transmitted out of the Gfp interface
INT gfpIdleRate	1.3.6.1.4.1.1038.17.10.51.1.12	INTEGER	read-only	The received Idle frames rate on a particular gfp port.
INT gfpIndex	1.3.6.1.4.1.1038.17.10.51.1.1	INTEGER	read-only	A unique value which identify a particular gfp port in the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are mapped to channelIndex values.
SEV gfpLOFD	1.3.6.1.4.1.1038.17.10.51.1.21	Severity	read-write	Severity associated with Loss Of Frame Delineation failure for gfp port.
SAG gfpMonitor	1.3.6.1.4.1.1038.17.10.51.1.17	SagemBoolean	read-write	When the value of this field is set to false, the failure detection is stopped for this gfp port.
INT gfpNumber	1.3.6.1.4.1.1038.17.10.50	INTEGER	read-only	ports Number of the Gfp layer. = number of entries in gfpTable
SEV gfpOOFD	1.3.6.1.4.1.1038.17.10.51.1.20	Severity	read-write	Severity associated with Out of Frame Delineation failure for gfp port.
INT gfpOperStatus	1.3.6.1.4.1.1038.17.10.51.1.16	INTEGER	read-only	The current operational state of the gfp port. The testing(3) state indicates that no operational packets can be passed.
INT gfpSendingRate	1.3.6.1.4.1.1038.17.10.51.1.13	INTEGER	read-only	The sent frames rate on a particular gfp port.
SEV gfpSeverity	1.3.6.1.4.1.1038.17.10.51.1.19	Severity	read-only	A reference to failure severity for gfp port.
GFP gfpState	1.3.6.1.4.1.1038.17.10.51.1.14	GfpState	read-only	This field allows to know in which state this gfp port is working.
gfpTable	1.3.6.1.4.1.1038.17.10.51		not-accessible	List of gfp port in the equipment.
gige	1.3.6.1.4.1.1038.17.10			The MIB module specific for GigE module of Adr2500c
SAG gigeAutoTest	1.3.6.1.4.1.1038.17.10.11.1.3	SagemBoolean	read-write	When the value of this field is set to true, an autotest is executed on the gigabitEthernet card.
gigeEntry	1.3.6.1.4.1.1038.17.10.11.1		not-accessible	A particular gigabitEthernet card of the equipment.
INT gigeIndex	1.3.6.1.4.1.1038.17.10.11.1.1	INTEGER	read-only	A unique value which identify a particular gigabitEthernet card of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware
INT gigeNumber	1.3.6.1.4.1.1038.17.10.10	INTEGER	read-only	Number of gigabitEthernet cards in equipment.
BAN gigeSdhBandwidth	1.3.6.1.4.1.1038.17.10.11.1.2	BandwidthSize	read-write	This field set the size of the SDH Bandwidth which is allocated to the gigabitEthernet card.
gigeTable	1.3.6.1.4.1.1038.17.10.11		not-accessible	List of gigabitEthernet cards in equipment.
SAG gigeWarmStart	1.3.6.1.4.1.1038.17.10.11.1.4	SagemBoolean	read-write	When the value of this field is set to true, a warmStart is launched on the gigabitEthernet card.
SAG maintenanceAutoTest	1.3.6.1.4.1.1038.17.10.21.1.2	SagemBoolean	read-write	When the value of this field is set to true, an autotest is executed on the gigabitEthernet port.
maintenanceEntry	1.3.6.1.4.1.1038.17.10.21.1		not-accessible	A particular gigabitEthernet port of the equipment.
INT maintenanceIndex	1.3.6.1.4.1.1038.17.10.21.1.1	INTEGER	read-only	A unique value which identify a particular gigabitEthernet port of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware
LOO maintenanceLoopback	1.3.6.1.4.1.1038.17.10.21.1.3	LoopbackGE	read-write	This field set a loopback mode to a particular gigabitEthernet port.
INT maintenanceNumber	1.3.6.1.4.1.1038.17.10.20	INTEGER	read-only	Number of gigabitEthernet ports in equipment.
STR maintenancePRBSReceived	1.3.6.1.4.1.1038.17.10.21.1.5	DisplayString	read-only	The value is the actual PRBS frame received in the particular gigabitEthernet port.
STR maintenancePRBSSent	1.3.6.1.4.1.1038.17.10.21.1.4	DisplayString	read-write	This field allows to sent a PRBS frame on a particular gigabitEthernet port.
SAG maintenanceResetAllCounters	1.3.6.1.4.1.1038.17.10.21.1.6	SagemBoolean	read-write	When the value of this field is set to true, all counters attached to this interface are deleted.
SAG maintenanceResetGfpCounters	1.3.6.1.4.1.1038.17.10.21.1.8	SagemBoolean	read-write	When the value of this field is set to true, all Gfp counters attached to this interface are deleted.
SAG maintenanceResetLanCounters	1.3.6.1.4.1.1038.17.10.21.1.7	SagemBoolean	read-write	When the value of this field is set to true, all QoS counters attached to this interface are deleted.
SAG maintenanceResetQosCounters	1.3.6.1.4.1.1038.17.10.21.1.9	SagemBoolean	read-write	When the value of this field is set to true, all Qos counters attached to this interface are deleted.
maintenanceTable	1.3.6.1.4.1.1038.17.10.21		not-accessible	List of gigabitEthernet ports in equipment.
INT pauseBetweenTime	1.3.6.1.4.1.1038.17.10.61.1.3	INTEGER	read-write	This field allows to set the Time between two Pause Frames transmission. The Unit used is the time slot (= 512 ns).
INT pauseCHT	1.3.6.1.4.1.1038.17.10.61.1.6	INTEGER	read-write	This field allows to configure the credit High Threshold of Pause mechanism.
INT pauseCLT	1.3.6.1.4.1.1038.17.10.61.1.7	INTEGER	read-write	This field allows to configure the credit Low Threshold of Pause mechanism.
pauseEntry	1.3.6.1.4.1.1038.17.10.61.1		not-accessible	A particular Ethernet port of the equipment.
PAU pauseFailure	1.3.6.1.4.1.1038.17.10.61.1.11	PauseFailure	read-only	Active failures in the pause mechanism of the Ethernet port.
INT pauseIndex	1.3.6.1.4.1.1038.17.10.61.1.1	INTEGER	read-only	A unique value which identify a particular Ethernet Physical port of a gigabitEthernet card. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Its values are mapped to IfIndex values of Lan Ports.
PHY pauseMacDA	1.3.6.1.4.1.1038.17.10.61.1.5	PhysAddress	read-write	The physical address used to fill the DestinationAddress field of any Pause Frame which is transmitted by the LinkPartner.
PHY pauseMacSA	1.3.6.1.4.1.1038.17.10.61.1.4	PhysAddress	read-write	The physical address of the Ethernet port. This address is used to fill the SourceAddress field of any Pause Frame which is trasmitted by the LinkPartner.
SEV pauseModeRejected	1.3.6.1.4.1.1038.17.10.61.1.13	Severity	read-write	This field allows to configure the Severity associated with Pause Mode Rejected failure for Ethernet port.
SAG pauseMonitor	1.3.6.1.4.1.1038.17.10.61.1.10	SagemBoolean	read-write	When the value of this field is set to false, the failure detection is stopped for this Ethernet port.
INT pauseNumber	1.3.6.1.4.1.1038.17.10.60	INTEGER	read-only	Number of ports in the equipment which accept Pause mechanism = number of entries in pauseTable
SEV pauseSeverity	1.3.6.1.4.1.1038.17.10.61.1.12	Severity	read-only	A reference to severity associated to the current pause failure.
pauseTable	1.3.6.1.4.1.1038.17.10.61		not-accessible	List of Ethernet port in the equipment which accept Pause mechanism.
INT pauseTime	1.3.6.1.4.1.1038.17.10.61.1.2	INTEGER	read-write	This field allows to set the Time during which the linkPartner stop any transmission. The Unit used is the time slot (= 512 ns).
SAG qosBwREnable	1.3.6.1.4.1.1038.17.10.31.1.6	SagemBoolean	read-write	This field allows to activate or desactivate the Sdh throughput reservation feature.
INT qosClassNumber	1.3.6.1.4.1.1038.17.10.31.1.2	INTEGER	read-write	This field allows to choose the number of CoS defined for the QoS
CON qosCongestionControl	1.3.6.1.4.1.1038.17.10.31.1.4	CongestionControl	read-write	This field allows to choose a mechanism to manage congestion problems. Some Type of Qos force the value of this field.
qosEntry	1.3.6.1.4.1.1038.17.10.31.1		not-accessible	A particular qos of the equipment.
C64 qosHCInCCDiscardsGe	1.3.6.1.4.1.1038.17.10.31.1.7	Counter64	read-only	The number of packets received on the GE interface which were discarded to prevent from switch saturation
C64 qosHCInCCDiscardsWan	1.3.6.1.4.1.1038.17.10.31.1.8	Counter64	read-only	The number of packets received on the WAN interface which were discarded to prevent from switch saturation
INT qosIndex	1.3.6.1.4.1.1038.17.10.31.1.1	INTEGER	read-only	A unique value which identify a particular QoS of the equipment. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware
INT qosNumber	1.3.6.1.4.1.1038.17.10.30	INTEGER	read-only	Number of Quality of Service set in equipment. This number match to channelNumber because there is only one Qos per Sdh Channel. = number of entries in qosTable
SCH qosSchedulingSystem	1.3.6.1.4.1.1038.17.10.31.1.5	SchedulingSystem	read-write	This field allows to choose a mechanism to manage congestion problems.
qosTable	1.3.6.1.4.1.1038.17.10.31		not-accessible	List of Qos in equipment.
QOS qosType	1.3.6.1.4.1.1038.17.10.31.1.3	QosType	read-write	This field allows to choose the type of Qos

RFC description

Manages gigabit Ethernet card configuration and status in SAGEM Adr2500c equipment.

Start monitoring SAGEM Adr2500c access/multiplexer with GigE module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GIGE-MIB