BTI8xx-SYSTEM-MIB

All MIBs › BTI8xx-SYSTEM-MIB

Organization: Actus Networks Ltd.

Last Updated: 2015-11-30

Category: Hardware and Environment, Optical and WDM, Vendor: BTI Systems

Description: Monitors system-level hardware status and operational parameters of BTI Systems BTI8xx optical devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BTI8xx-SYSTEM-MIB?

BTI8xx-SYSTEM-MIB is the top-level system MIB for BTI Systems' BTI8xx series optical/transport devices, laying out the root system objects from which the rest of the BTI8xx OID tree descends. It exposes core system identity and hardware/software status objects including system name, uptime, hardware and software version, software build date, device temperature, product name, and management access details like server IP address and FTP credentials for file transfer/upgrade. Its monitoring emphasis is directly on device health: systemUpTime for detecting reboots, systemTemperature for thermal health of the chassis, and systemHWVersion/systemSWVersion for confirming hardware revision and firmware currency, all common first-checks in an optical NE's status dashboard. As a device-specific top-level MIB it typically sits above other BTI8xx feature MIBs (interfaces, alarms, provisioning) rather than depending on external standards. Deployment context is BTI8xx optical transport/access platforms deployed by carriers and monitored via SNMP from a network management system. Network engineers evaluating or troubleshooting this functionality can download the BTI8xx-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BTI8xx-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BTI Systems BTI8xx optical transport device

Monitoring Examples

An operator would poll systemUpTime and systemTemperature together to spot a device that rebooted and is now running hot, and check systemSWVersion/systemHWVersion to confirm the deployed firmware matches the hardware revision's supported release. Reviewing serverIpAddr and ftpUserName settings validates that automated firmware upload/download via FTP is correctly configured before a remote upgrade. A rising systemTemperature trend without an uptime reset would flag a cooling problem needing field attention.

What Can Be Monitored

system uptime
chassis temperature
hardware version
software version and build date
FTP server configuration for firmware transfer
product/system name

Imported Objects

From BTI8xx-TC-MIB

mainSystem

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From PerfHist-TC-MIB

PerfCurrentCount
PerfIntervalCount
PerfTotalCount

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
accessInfo	1.3.6.1.4.1.30005.1.7.100.1.2.1.2
I32 autoLogoutTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.2	Integer32	read-write	The auto-logout timer in minute of console/telnet/web based managment. 0 means auto logout is disabled. 0~35791 are applicable.
INT cfgFileControl	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.2.2	INTEGER	read-write	This Object is Control Config File BackUp: Configfile backup and upload to server. Restore : Configfile download and restore.
OCT cfgFileName	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.2.1	OCTET STRING	read-write	This Object is ConfigFile BackUp Name.
INT cfgFileStatus	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.2.3	INTEGER	read-only	This object represents the state of configfile backup and download.
configAndImageMgmt	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2
configMgmt	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.2
INT consoleBaudRate	1.3.6.1.4.1.30005.1.7.100.1.2.1.3.1	INTEGER	read-only	The baud rate of the console port.
INT consoleCharSize	1.3.6.1.4.1.30005.1.7.100.1.2.1.3.2	INTEGER	read-only	The character size of the console port.
INT consoleFlowControl	1.3.6.1.4.1.30005.1.7.100.1.2.1.3.5	INTEGER	read-only	The flow control of the console port.
consoleInformation	1.3.6.1.4.1.30005.1.7.100.1.2.1.3
INT consoleParityBits	1.3.6.1.4.1.30005.1.7.100.1.2.1.3.3	INTEGER	read-only	The parity bits of the console port.
INT consoleStopBits	1.3.6.1.4.1.30005.1.7.100.1.2.1.3.4	INTEGER	read-only	The stop bits of the console port.
I32 fanCtrlStartTemp	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.7	Integer32	read-write	Fan Start Temperature : between 0 and 100
I32 fanCtrlStopTemp	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.8	Integer32	read-write	Fan Stop Temperature : between -30 and 30
I32 fanHighTolerance	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.12	Integer32	read-write	Fan High Over Flow Tolerance : between 10% to 80%
I32 fanHighToleranceValue	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.13	Integer32	read-only	Fan HighOver Flow Tolerance RPM
I32 fanLowTolerance	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.10	Integer32	read-write	Fan Low Under Flow Tolerance : between 10% to 80%
I32 fanLowToleranceValue	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.11	Integer32	read-only	Fan Low Under Flow Tolerance RPM
I32 fanRpmConfig	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.9	Integer32	read-only	Fan Rpm : between 5000 and 20000
OCT ftpUserName	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.1.2	OCTET STRING	read-write	FtpUserName
OCT ftpUserPasswd	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.1.3	OCTET STRING	read-write	FtpUserPasswd
OCT imageInfoCreated	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1.3	OCTET STRING	read-only	Created of the Image.
INT imageInfoCurrent	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1.5	INTEGER	read-write	Show Current Image
imageInfoEntry	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1		not-accessible	ImageInfoTable Entry.
INT imageInfoIndex	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1.1	INTEGER	read-only	Index of the Image.
I32 imageInfoSize	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1.4	Integer32	read-only	Size of the Image.(bytes)
imageInfoTable	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10		not-accessible	ImageInformation Table. It includes the information of the Primary bank and the Secondary bank
OCT imageInfoVersion	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.10.1.2	OCTET STRING	read-only	Version of the Image.
imageMgmt	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3
OCT lastCommand	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.6	OCTET STRING	read-only	Save the last command line and time.
STR lastSaveTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.3	DisplayString	read-only	This value is shows the last save time of base system
I32 mgmtInnerVlan	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.5.3	Integer32	read-write	0 is untagged
I32 mgmtInnerVlanPriority	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.5.4	Integer32	read-write
I32 mgmtOuterVlan	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.5.1	Integer32	read-write
I32 mgmtOuterVlanPriority	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.5.2	Integer32	read-write
mgmtVlanConfig	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.5
miscellaneous	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3
IP pDefaultGateway	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.9	IpAddress	read-write	Default Gateway - 0.0.0.0 : disable
IP pInbandIPAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.1	IpAddress	read-write	Ip Adddress of inband Primary management ETH port
MAC pInbandMACAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.4	MacAddress	read-only	MAC address of inband Primary management ETH port
IP pInbandNetMask	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.2	IpAddress	read-write	NetMask of inband Primary management ETH port
IP pInbandNetworkAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.3	IpAddress	read-only	Network address of Inband Primary management ETH port
IP pOOBIPAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.5	IpAddress	read-only	IP address of OOB(Out of Band) ETH port
MAC pOOBMACAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.8	MacAddress	read-only	MAC address of OOB(Out of band) port
IP pOOBNetMask	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.6	IpAddress	read-only	NetMask of OOB(Out of band) ETH port
IP pOOBNetworkAddress	1.3.6.1.4.1.30005.1.7.100.1.2.1.2.7	IpAddress	read-only	Network address of OOB(Out of band) ETH port
INT reboot	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.1	INTEGER	read-write	Writing this object as other than none will make the software reboot. reboot means slot1, slot2 and Main reboot simultaneously. This process takes a few minutes.
INT save	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.2	INTEGER	read-write	Writing this object other than none will save the current running configuration to the non-volatile memory of main
serverConfig	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.1
INT serverInterfaceType	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.1.4	INTEGER	read-write	Server type oob : Management Interface inBand : In-band Interface
IP serverIpAddr	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.1.1	IpAddress	read-write	Ftp or Tftp Server Ip Address
systemConfig	1.3.6.1.4.1.30005.1.7.100.1.2.1			This is a top-level MIB for Actus whose purpose is to lay out the top-level objects in the OID hierarchy from which BTI8xx MIB OIDs descend.
OCT systemHWVersion	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.4	OCTET STRING	read-only	H/W Version of Main System
systemInfo	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1
systemManagement	1.3.6.1.4.1.30005.1.7.100.1.2.1.1
OCT systemName	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.1	OCTET STRING	read-only	The System Name (Network Element Name)
OCT systemProductName	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.8	OCTET STRING	read-write	The System Product Name
OCT systemSWDateAndTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.6	OCTET STRING	read-only	S/W Date and Time of Main System(ex. Apr 8 2010 14:00:01)
OCT systemSWVersion	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.5	OCTET STRING	read-only	S/W Version of Main System
I32 systemTemperature	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.7	Integer32	read-only	System Temperature of Main System(Celsius)
OCT systemTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.5	OCTET STRING	read-write	system Current Time - Time Format : Nov 15 20:53:40 2009
TIK systemUpTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.1.3	TimeTicks	read-only	On site time- time after the last power up Second resolution (also year) Format: YY-DDD-HH-MM-SS (Year, Day, HR, Minute,Second)
I32 tempHighThreshold	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.14	Integer32	read-write	High temperature threshold(0 to 100)
I32 tempLowThreshold	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.15	Integer32	read-write	Low temperature threshold(-1 to -30)
OCT timezone	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.3.4	OCTET STRING	read-write	The timezone configuration of the device. The examples are kst, KST, cnt etc. act - ACT. Australia Central Time(GMT+9:30) aet - AET. Australia Eastern Time(GMT+10:00) agt - AGT. Argentina Standard Time(GMT-3:00) art - ART. (Arabic) Egypt Standard Time(GMT+2:00) ast - AST. Alaska Standard Time(GMT-9:00) bet - BET. Brazil Eastern Time(GMT-3:00) bst - BST. Bangladesh Standard Time(GMT+6:00) cat - CAT. Central African Time(GMT-1:00) cnt - CNT. Canada Newfoundland Time(GMT-3:30) cst - CST. Central Standard Time(GMT-6:00) ctt - CTT. China Taiwan Time(GMT+8:00) eat - EAT. Eastern African Time(GMT+3:00) ect - ECT. European Central Time(GMT+1:00) edt - EDT. Eastern Daylight Time(GMT-4:00) eet - EET. Eastern European Tim(GMT+2:00) est - EST. Eastern Standard Time(GMT-5:00) gmt - GMT. Greenwich Mean Time hst - HST. Hawaii Standard Time(GMT-10:00) iet - IET. Indiana Eastern Standard Time(GMT-5:00) ist - IST. India Standard Time(GMT+5:30) jst - JST. Japan Standard Time(GMT+9:00) kst - KST. Korea Standard Time(GMT+9:00) met - MET. Middle East Time(GMT+3:30) mit - MIT. Midway Islands Time(GMT-11:00) mst - MST. Mountain Standard Time(GMT-7:00) net - NET. Near East Time(GMT+4:00) nst - NST. New Zealand Standard Time(GMT+12:00) plt - PLT. Pakistan Lahore Time(GMT+5:00) pnt - PNT. Phoenix Standard Time(GMT-7:00) prt - PRT. Puerto Rico and US Virgin Islands Time(GMT-4:00) pst - PST. Pacific Standard Time(GMT-8:00) sst - SST. Solomon Standard Time(GMT+11:00) utc - UTC. Universal Coordinated Time vst - VST. Vietnam Standard Time(GMT+7:00)
INT upgradeImageSW	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.3	INTEGER	read-write	This object provides the operator the ability to upgrade the image to a file. The initial value would be none(0). Before starting update image, upgradeImageSWFilenName and ftpConfig or tftpConfig value should be set. updateImageFile(1) : Download the image file(by FTP server). upgradeImage(2) : Upgrade image file. This operation need long period, so Please checked the upgradeImageSWStatus. Reboot should be executed to finish upgrade procedure when load upgrade will be passed.
OCT upgradeImageSWDateAndTime	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.5	OCTET STRING	read-only	The date and time when upgradeImageSWStatus happen.
OCT upgradeImageSWFileName	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.1	OCTET STRING	read-write	Upgrade Image FileName wiht the remote path. the remote path is different from window-based ftp-server and linux-based ftp-server. Window-based ftp-server : folder classification is '\'. (\image\bti800_main.img) Linux-based ftp-server : folder classification is '/'. (/image/bti800_main.img)
INT upgradeImageSWStatus	1.3.6.1.4.1.30005.1.7.100.1.2.1.1.2.3.4	INTEGER	read-only	The current status of the upgrade operation. - fileSizeError : image file is not matched image bank The initial value should be none(0) and also it should be none when get the imageFpga file success from the server. The valus inProgress(2) is returned while upgradeImage. The valus diskIsFull(3) is returned when file System is full and imageSW file is not written. The valus fileSizeError(4) is returned when expected file size is not match with downloaded file. The valus fileOpenError(5) is returned when there is a problem on downloaded file. The valus fileCRCError(6) is returned whne there is a checksum error on downloaded file. The valus flashEraseError(7) is returned when there is a problem on erasing flash. The valus flashWriteError(8) is returned when there is a problem on writing flash. The valus unknownError(9) is returned when there is a problem with others. For imageSW upgrade/backup, it follows below procedures. 1) The value UpgradeLoadSuccess1stDone(109) is returned when the upgradeImage command executed successfully. 2) The value UpgradeInvokeSuccess2ndDone(112) is returned when reboot after upgradeImage success. 3) The value success(1) is returned when the backupImage command executed successfully. For others, it is for retrieving the status of upgrade processing. upgradeDeliveryInProgress(101) upgradeDeliveryFailed (102) upgradeDeliverySuccess (103) Delivery stage is that imageSW file is downloaded. upgradeCheckInProgress (104) upgradeCheckFailed (105) upgradeCheckSuccess (106) Check stage is that the downloaded file is checked for healthy. upgradeLoadInProgress (107) upgradeLoadFailed (108) Load stage is that the downloaded imageSW is written on the primary bank. upgradeInvokeInProgress (110) upgradeInvokeFailed (111) Invoke stage can be issued only when upgrade state is Load passed. The product is restarted from primary bank with new load. If the primary bank load is corrupted, the product should start running from secondary bank. upgradeCommitInProgress (113) upgradeCommitFailed (114) Commit stage is that it can be executed only after Invoke Upgrade stage when it is successfully completed the image is copied from the primary to the secondary bank and only when the system started from primary bank. The upgradeXXXX return codes are only for imageSW.

RFC description

Manages system configuration and status for Actus BTI8xx network devices including firmware, time settings, and performance metrics.

Start monitoring BTI Systems optical transport devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BTI8xx-SYSTEM-MIB

What Is BTI8xx-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description