All MIBs › GIGE-MIB › gigeSdhBandwidth
gigeSdhBandwidth
Module: GIGE-MIB
OID (symbolic): GIGE-MIB::gigeSdhBandwidth
OID (numeric): 1.3.6.1.4.1.1038.17.10.11.1.2
Node type: OBJECT-TYPE
Type: BandwidthSize
Access: read-write
Description: This field set the size of the SDH Bandwidth which is allocated to the gigabitEthernet card.
What is gigeSdhBandwidth?
Sets the size of the SDH bandwidth allocated to a gigabitEthernet card: none(0), stm1(1), stm4(4), stm16(16), or stm64(64), per its DESCRIPTION. This determines how much of the SDH transport the GigE card can actually use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.2 snmpwalk -v2c -c public <target> GIGE-MIB::gigeSdhBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.2.1 snmpget -v2c -c public <target> GIGE-MIB::gigeSdhBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.17.10.11.1.2.1 s <value>
Start monitoring SAGEM Adr2500c access/multiplexer with GigE module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GIGE-MIB::gigeSdhBandwidth OID value, configure state conditions and alerts, and monitor any SAGEM Adr2500c access/multiplexer with GigE module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| 1.3.6.1.4.1.1038.17 | adr2500c | ADR2500C-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.17.10 | gige | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11 | gigeTable | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11.1 | gigeEntry | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11.1.2 | gigeSdhBandwidth | GIGE-MIB |