GIGE-MIB :: gigeWarmStart

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsGIGE-MIBgigeWarmStart

gigeWarmStart

Module: GIGE-MIB

OID (symbolic): GIGE-MIB::gigeWarmStart

OID (numeric): 1.3.6.1.4.1.1038.17.10.11.1.4

Node type: OBJECT-TYPE

Type: SagemBoolean

Access: read-write

Description: When the value of this field is set to true, a warmStart is launched on the gigabitEthernet card.

What is gigeWarmStart?

When set to true, launches a warm start (soft restart) of the gigabitEthernet card identified by gigeIndex, per its DESCRIPTION. A less disruptive recovery option than a full hardware reboot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.4
snmpwalk -v2c -c public <target> GIGE-MIB::gigeWarmStart

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.4.1
snmpget -v2c -c public <target> GIGE-MIB::gigeWarmStart.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.17.10.11.1.4.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> gigeWarmStart.1

Start monitoring SAGEM Adr2500c access/multiplexer with GigE module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GIGE-MIB::gigeWarmStart OID value, configure state conditions and alerts, and monitor any SAGEM Adr2500c access/multiplexer with GigE module from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1038sagemDrSAGEM-DR-MIB
1.3.6.1.4.1.1038.17adr2500cADR2500C-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1038.17.10gigeGIGE-MIB
1.3.6.1.4.1.1038.17.10.11gigeTableGIGE-MIB
1.3.6.1.4.1.1038.17.10.11.1gigeEntryGIGE-MIB
1.3.6.1.4.1.1038.17.10.11.1.4gigeWarmStartGIGE-MIB