All MIBs › GIGE-MIB › gigeAutoTest
gigeAutoTest
Module: GIGE-MIB
OID (symbolic): GIGE-MIB::gigeAutoTest
OID (numeric): 1.3.6.1.4.1.1038.17.10.11.1.3
Node type: OBJECT-TYPE
Type: SagemBoolean
Access: read-write
Description: When the value of this field is set to true, an autotest is executed on the gigabitEthernet card.
What is gigeAutoTest?
When set to true, triggers an autotest on the gigabitEthernet card identified by gigeIndex, per its DESCRIPTION. Used as an on-demand self-check rather than a continuously monitored status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.3 snmpwalk -v2c -c public <target> GIGE-MIB::gigeAutoTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.11.1.3.1 snmpget -v2c -c public <target> GIGE-MIB::gigeAutoTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.17.10.11.1.3.1 s <value>
Start monitoring SAGEM Adr2500c access/multiplexer with GigE module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GIGE-MIB::gigeAutoTest OID value, configure state conditions and alerts, and monitor any SAGEM Adr2500c access/multiplexer with GigE module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| 1.3.6.1.4.1.1038.17 | adr2500c | ADR2500C-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.17.10 | gige | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11 | gigeTable | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11.1 | gigeEntry | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.11.1.3 | gigeAutoTest | GIGE-MIB |