All MIBs › GIGE-MIB › maintenanceAutoTest
maintenanceAutoTest
Module: GIGE-MIB
OID (symbolic): GIGE-MIB::maintenanceAutoTest
OID (numeric): 1.3.6.1.4.1.1038.17.10.21.1.2
Node type: OBJECT-TYPE
Type: SagemBoolean
Access: read-write
Description: When the value of this field is set to true, an autotest is executed on the gigabitEthernet port.
What is maintenanceAutoTest?
When set to true, triggers an autotest on the gigabitEthernet port identified by maintenanceIndex, per its DESCRIPTION, distinct from the card-level gigeAutoTest. Used for a targeted, per-port self-check.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.21.1.2 snmpwalk -v2c -c public <target> GIGE-MIB::maintenanceAutoTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.17.10.21.1.2.1 snmpget -v2c -c public <target> GIGE-MIB::maintenanceAutoTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.17.10.21.1.2.1 s <value>
Start monitoring SAGEM Adr2500c access/multiplexer with GigE module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GIGE-MIB::maintenanceAutoTest OID value, configure state conditions and alerts, and monitor any SAGEM Adr2500c access/multiplexer with GigE module from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| 1.3.6.1.4.1.1038.17 | adr2500c | ADR2500C-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.17.10 | gige | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.21 | maintenanceTable | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.21.1 | maintenanceEntry | GIGE-MIB |
| 1.3.6.1.4.1.1038.17.10.21.1.2 | maintenanceAutoTest | GIGE-MIB |