CTRON-SFPS-PORT-MIB

All MIBs › CTRON-SFPS-PORT-MIB

Category: Vendor: Cabletron/Enterasys

Description: Manages Cabletron SFPS port configuration, port-level statistics, and port participation in virtual networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-SFPS-PORT-MIB?

CTRON-SFPS-PORT-MIB is a Cabletron SecureFast Packet Switching (SFPS) MIB managing per-port configuration, bandwidth allocation, and QoS settings for ports participating in the SecureFast switching fabric. It exposes an input-port configuration table (sfpsInPortConfigTable/Entry) with objects for admin/operational status, uptime, port type, reserved and allocated bandwidth, QoS class, and queue size (sfpsInPortConfigAdminStatus, sfpsInPortConfigOperStatus, sfpsInPortConfigOperTime, sfpsInPortConfigReservedBW, sfpsInPortConfigAllocBW, sfpsInPortConfigQoS, sfpsInPortConfigQSize). Its monitoring focus covers both port hardware/link status (admin/oper status, uptime) and software-level resource allocation (reserved vs. allocated bandwidth, QoS class, queue size), making it useful for spotting a port that is administratively up but operationally down, or one that is over-allocated relative to its reserved bandwidth. It is part of the broader Cabletron SFPS MIB family, sharing switch-instance/port indexing conventions with the other SFPS MIBs. It is deployed on Cabletron SecureFast switches where per-port bandwidth reservation and QoS tuning is used to guarantee service levels across the fabric. Network engineers evaluating or troubleshooting this functionality can download the CTRON-SFPS-PORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron SecureFast Packet Switching (SFPS) switch

Monitoring Examples

An admin would poll sfpsInPortConfigTable/Entry indexed by sfpsInPortConfigPort to compare sfpsInPortConfigAdminStatus against sfpsInPortConfigOperStatus, catching a port that was enabled but has failed to come up (e.g. bad cable or SFP). sfpsInPortConfigReservedBW versus sfpsInPortConfigAllocBW would reveal a port that has allocated more bandwidth than reserved, signaling a QoS oversubscription risk. sfpsInPortConfigOperTime shows how long the port has been in its current operational state, and sfpsInPortConfigQSize indicates the queue depth configured for that port's QoS class.

What Can Be Monitored

port admin/operational status
port uptime
reserved vs allocated bandwidth
QoS class
queue size

Imported Objects

From CTRON-SFPS-INCLUDE-MIB

sfpsPortAttributeAPI	OBJECT-IDENTITY
sfpsPortAttributeTable	OBJECT-IDENTITY
sfpsPortConfig	OBJECT-IDENTITY
sfpsPortStats	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT sfpsInPortConfigAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2	INTEGER	read-write	Sets the administrative state of the SFPS inbound switch port for which the entry exists.
INT sfpsInPortConfigAllocBW	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7	INTEGER	read-only	Sets the amount of Bandwidth that is allocated for the inbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.
sfpsInPortConfigEntry	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1		not-accessible	Each entry specifies the SFPS configuration for the SFPS inbound switch port for which the entry exists.
SFP sfpsInPortConfigFrontPanelPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13	SfpsSwitchPort	read-only	This represents the front panel physical port number
INT sfpsInPortConfigLayer3Learning	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22	INTEGER	read-only	Topology Agent
TIK sfpsInPortConfigLinkStateAge	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15	TimeTicks	read-only	Number of time ticks that link has been in this state.
INT sfpsInPortConfigLinkStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14	INTEGER	read-only	The link status of this port.
INT sfpsInPortConfigMediaType	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12	INTEGER	read-only
INT sfpsInPortConfigMib2PortId	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18	INTEGER	read-only	Mib2 Port id
INT sfpsInPortConfigOperStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3	INTEGER	read-only	Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists.
TIK sfpsInPortConfigOperTime	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4	TimeTicks	read-only	Indicates the elapsed time, in hundredths of a second, that sfpsInPortOperStatus has been in its current operational state on the SFPS inbound switch port for which this entry exists.
SFP sfpsInPortConfigPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1	SfpsSwitchPort	read-only	The primary index to the SFPS in port table. This identifies the inbound SFPS switch port for which the entry exists.
GAU sfpsInPortConfigQLen	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10	Gauge	read-only	Indicates the actual inbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.
INT sfpsInPortConfigQoS	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8	INTEGER	read-write	Sets the desired QoS service class for the inbound SFPS port for which this entry exists.
INT sfpsInPortConfigQSize	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9	INTEGER	read-only	Indicates the maximum inbound queue size for this port. Size is indicated in packets (packet descriptors).
INT sfpsInPortConfigReservedBW	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6	INTEGER	read-write	Sets the amount of Bandwidth that is reserved for the inbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.
INT sfpsInPortConfigRouterPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16	INTEGER	read-only	Specifies whether this port is a router port.
INT sfpsInPortConfigSlotNumber	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17	INTEGER	read-only	Slot number in the chassis.
OCT sfpsInPortConfigSwitchId	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11	OCTET STRING	read-only	This entry is the id of the port.
sfpsInPortConfigTable	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1		not-accessible	This table contains the configuration information of each configured inbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist.
STR sfpsInPortConfigTopoAgent	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19	DisplayString	read-only	Topology Agent
INT sfpsInPortConfigType	1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5	INTEGER	read-write	Sets the type of port access attribute for the inbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets.
INT sfpsInPortStatsAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2	INTEGER	read-write	Sets the administrative state of the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.
CTR sfpsInPortStatsBytes	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7	Counter	read-only	Indicates the total number of SFPS bytes that have been received, during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.
CTR sfpsInPortStatsDiscardBytes	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8	Counter	read-only	Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsInPortStatsOperTime, on the inbound SFPS switch port for which the entry exists.
CTR sfpsInPortStatsDiscardPkts	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6	Counter	read-only	Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists
sfpsInPortStatsEntry	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1		not-accessible	Specifies the SFPS packet and byte counters for the inbound SFPS switch port for which this entry exists.
CTR sfpsInPortStatsLinkDowns	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11	Counter	read-only	The number of link downs that this port has seen.
CTR sfpsInPortStatsLinkUps	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10	Counter	read-only	The number of link ups that this port has seen.
TIK sfpsInPortStatsOperTime	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4	TimeTicks	read-only	Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the inbound SFPS switch port for which this entry exists.
CTR sfpsInPortStatsPkts	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5	Counter	read-only	Indicates the total number of SFPS packets that have been received, during sfpsInPortStatsOpertime, on the inbound SFPS switch port for which this entry exists.
SFP sfpsInPortStatsPort	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1	SfpsSwitchPort	read-only	The primary index to the SFPS port table. This identifies the SFPS inbound switch port for which the entry exists.
CTR sfpsInPortStatsQOverflows	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9	Counter	read-only	Indicates the total number of queue overflow conditions have been experienced for the inbound SFPS switch port for which the entry exists.
INT sfpsInPortStatsReset	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3	INTEGER	read-write	Resets the SFPS packet and byte counters on the inbound SFPS switch port for which this entry exists.
sfpsInPortStatsTable	1.3.6.1.4.1.52.4.2.4.2.1.2.2.1		not-accessible	This table contains the packet and byte counters for each inbound SFPS switch port.
INT sfpsOutPortConfigAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2	INTEGER	read-write	Sets the administrative state of the SFPS outbound switch port for which the entry exists.
INT sfpsOutPortConfigAllocBW	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7	INTEGER	read-only	Sets the amount of Bandwidth that is allocated for the outbound SFPS port for which this entry exists. This bandwidth may be less than the reserved bandwidth.
sfpsOutPortConfigEntry	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1		not-accessible	Each entry specifies the SFPS configuration for the SFPS outbound switch port for which the entry exists.
SFP sfpsOutPortConfigFrontPanelPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13	SfpsSwitchPort	read-only
TIK sfpsOutPortConfigLinkStateAge	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15	TimeTicks	read-only	Number of time ticks that link has been in this state.
INT sfpsOutPortConfigLinkStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14	INTEGER	read-only	The link status of this port.
INT sfpsOutPortConfigMediaType	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12	INTEGER	read-only
INT sfpsOutPortConfigMib2PortId	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18	INTEGER	read-only	Mib2 Port id
INT sfpsOutPortConfigOperStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3	INTEGER	read-only	Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists.
TIK sfpsOutPortConfigOperTime	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4	TimeTicks	read-only	Indicates the elapsed time, in hundredths of a second, that sfpsOutPortOperStatus has been in its current operational state on the SFPS outbound switch port for which this entry exists.
SFP sfpsOutPortConfigPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1	SfpsSwitchPort	read-only	The primary index to the SFPS in port table. This identifies the outbound SFPS switch port for which the entry exists.
GAU sfpsOutPortConfigQLen	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10	Gauge	read-only	Indicates the actual outbound queue size for this port. Size is indicated in packets (packet descriptors). This is a transient value that reflects the current depth of queue.
INT sfpsOutPortConfigQoS	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8	INTEGER	read-write	Sets the desired QoS service class for the outbound SFPS port for which this entry exists.
INT sfpsOutPortConfigQSize	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9	INTEGER	read-only	Indicates the maximum outbound queue size for this port. Size is indicated in packets (packet descriptors).
INT sfpsOutPortConfigReservedBW	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6	INTEGER	read-write	Sets the amount of Bandwidth that is reserved for the outbound SFPS port for which this entry exists. This bandwidth is set aside for this port and may be given to another port if unused.
INT sfpsOutPortConfigRouterPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16	INTEGER	read-only	Specifies whether this port is a router port.
INT sfpsOutPortConfigSlotNumber	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17	INTEGER	read-only	Slot number in the chassis.
OCT sfpsOutPortConfigSwitchId	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11	OCTET STRING	read-only	This entry is id of the port.
sfpsOutPortConfigTable	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2		not-accessible	This table contains the configuration information of each configured outbound SFPS switch port. If SFPS is not configured on a port, than an entry will not exist.
INT sfpsOutPortConfigType	1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5	INTEGER	read-write	Sets the type of port access attribute for the outbound SFPS port for which the entry exists. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control; host management port indicates the (virtual) port to which the (internal) management agent is attached; host control port indicates the port to redirect non-management packets.
INT sfpsOutPortStatsAdminStatus	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2	INTEGER	read-write	Sets the administrative state of the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.
CTR sfpsOutPortStatsBytes	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7	Counter	read-only	Indicates the total number of SFPS bytes that have been received, during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.
CTR sfpsOutPortStatsDiscardBytes	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8	Counter	read-only	Indicates the total number of bytes in the SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOperTime, on the outbound SFPS switch port for which the entry exists.
CTR sfpsOutPortStatsDiscardPkts	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6	Counter	read-only	Indicates the total number of SFPS packets that have been discarded (dropped), during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists
sfpsOutPortStatsEntry	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1		not-accessible	Specifies the SFPS packet and byte counters for the outbound SFPS switch port for which this entry exists.
CTR sfpsOutPortStatsLinkDowns	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11	Counter	read-only	The number of link downs that this port has seen.
CTR sfpsOutPortStatsLinkUps	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10	Counter	read-only	The number of link ups that this port has seen.
TIK sfpsOutPortStatsOperTime	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4	TimeTicks	read-only	Indicates the amount of time (# of time ticks) that the port-specific SFPS packet and byte counters have been active on the outbound SFPS switch port for which this entry exists.
CTR sfpsOutPortStatsPkts	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5	Counter	read-only	Indicates the total number of SFPS packets that have been received, during sfpsOutPortStatsOpertime, on the outbound SFPS switch port for which this entry exists.
SFP sfpsOutPortStatsPort	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1	SfpsSwitchPort	read-only	The primary index to the SFPS port table. This identifies the SFPS outbound switch port for which the entry exists.
CTR sfpsOutPortStatsQOverflows	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9	Counter	read-only	Indicates the total number of queue overflow conditions have been experienced for the outbound SFPS switch port for which the entry exists.
INT sfpsOutPortStatsReset	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3	INTEGER	read-write	Resets the SFPS packet and byte counters on the outbound SFPS switch port for which this entry exists.
sfpsOutPortStatsTable	1.3.6.1.4.1.52.4.2.4.2.1.2.2.2		not-accessible	This table contains the packet and byte counters for each outbound SFPS switch port.
INT sfpsPortAttributeAPIAttribute	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.3	INTEGER	read-write
INT sfpsPortAttributeAPIPort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.2	INTEGER	read-write
INT sfpsPortAttributeAPIVerb	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.1	INTEGER	read-write
NUM sfpsPortAttributeAttributes	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.2	HexInteger	read-only
INT sfpsPortAttributeLearnSelfArp	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.3	INTEGER	read-only
INT sfpsPortAttributePort	1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.1	INTEGER	read-only

RFC description

Manages Cabletron SFPS (Fast Packet Switching Services) port configuration and statistics for packet switching monitoring and port setup.

Start monitoring Cabletron SecureFast Packet Switch (SFPS), per-port bandwidth/QoS with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-SFPS-PORT-MIB

What Is CTRON-SFPS-PORT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description