CTRON-COMMON-MIB

All MIBs › CTRON-COMMON-MIB

Category: SNMP Framework, Vendor: Cabletron/Enterasys

Description: Provides common Cabletron/Enterasys MIB objects shared across multiple product families and platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CTRON-COMMON-MIB?

CTRON-COMMON-MIB is a vendor MIB providing shared/common object definitions and conventions used across Cabletron Systems' (later Enterasys Networks) multiple product families and switch/router platforms. It is a foundational, configuration-category MIB whose main purpose is to establish common textual conventions, object identifiers, or shared structures rather than device-specific operational data, so its monitoring content is limited on its own. Its indirect role in hardware/software health monitoring comes from underpinning product-specific Cabletron MIBs (which reference its common definitions) that in turn expose chassis, module, and interface status data. It is explicitly a dependency for other Cabletron/Enterasys product MIBs, which import definitions from it, rather than depending outward on external standards. It is typically deployed as a supporting MIB loaded alongside product-specific Cabletron/Enterasys MIBs across their switch and router lines, with the CTRON-COMMON-MIB MIB itself providing the shared definitions those product MIBs build upon.

IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cabletron/Enterasys network switches and routers (shared/common definitions)

Monitoring Examples

No sample object names were provided for this module, so specific table or object names cannot be cited with confidence. In general, this MIB is not polled directly for monitoring data; instead, product-specific Cabletron/Enterasys MIBs import its common definitions, and an admin's monitoring scenario would actually target those dependent MIBs' chassis or interface objects rather than CTRON-COMMON-MIB itself.

Imported Objects

From IRM-OIDS

commonRev1	OBJECT-IDENTITY
dl	OBJECT-IDENTITY
subSysDevice	OBJECT-IDENTITY
subSysMMAC	OBJECT-IDENTITY
ups	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
NetworkAddress

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
chassis	1.3.6.1.4.1.52.1.6.1.3
INT chassisAlarmEna	1.3.6.1.4.1.52.1.6.1.3.5	INTEGER	read-write	Allow an audible alarm to be either enabled or dis- abled.
INT chassisAlarmState	1.3.6.1.4.1.52.1.6.1.3.6	INTEGER	read-write	Denotes the current condition of the power supply fault detection circuit. Setting a value of chassisNoFaultCondition(1) disables the current chassis alarm condition, and stops the current audible alarm from sounding. Setting a value of chassisFaultCondition(2) is not allowed. This object will read with the value of chassisNoFaultCondition(1) when the chassis is currently operating with no power faults detected. This object will read with the value of chassisFaultCondition(2) when the chassis is currently in a power fault condition.
INT chassisFNB	1.3.6.1.4.1.52.1.6.1.3.4	INTEGER	read-only	Denotes the presence or absence of the FNB.
INT chassisHWRev	1.3.6.1.4.1.52.1.6.1.3.1	INTEGER	read-only	Define the hardware revision of the device or sys- tem chassis.
INT chassisSlots	1.3.6.1.4.1.52.1.6.1.3.3	INTEGER	read-only	Denotes the number of available chassis slots.
INT chassisType	1.3.6.1.4.1.52.1.6.1.3.2	INTEGER	read-only	Denotes the type of chassis.
STR deviceDate	1.3.6.1.4.1.52.1.1.1.5	DisplayString	read-write	The current date, as measured by the device. The representation shall use the standard MMDDYYYY format.
IP deviceIPAddress	1.3.6.1.4.1.52.1.1.1.3	IpAddress	read-write	The Network address, in this case the IP address, of the device. This object is required for use by the Local Management Interface.
STR deviceName	1.3.6.1.4.1.52.1.1.1.2	DisplayString	read-write	A textual description on the entity managed by the resident agent. It is mandatory that this only con- tain printable ASCII characters.
STR deviceTime	1.3.6.1.4.1.52.1.1.1.4	DisplayString	read-write	The current time of day, in 24 hour format, as measured by the device. The representation shall use the standard HHMMSS format.
INT deviceType	1.3.6.1.4.1.52.1.1.1.1	INTEGER	read-only	The type of management board.
OCT dlBootRev	1.3.6.1.4.1.52.1.6.4.13	OCTET STRING	read-only	Denotes the revision of boot firmware in the module. The first octets provides the version, and the second provides the revision.
INT dlCommitRAMToFlash	1.3.6.1.4.1.52.1.6.4.2	INTEGER	read-write	When written with a 1, the boot software will erase flash memory, compress the downloaded code, and save the compressed image into flash memory. Upon com- pletion of this operation, the flash memory driver resets this object to 0, indicating completion of the programming operation.
STR dlErrorString	1.3.6.1.4.1.52.1.6.4.20	DisplayString	read-only	If the value of ctDLOperStatus is downloadCompleteError(5) then this object will provide a more complete description of the error. Otherwise this object will be the zero length string.
OCT dlFileName	1.3.6.1.4.1.52.1.6.4.19	OCTET STRING	read-write	Filename requested of the server when an image is to be downloaded using the Runtime TFTP Download. This should be a complete path filename.
INT dlFirmwareBase	1.3.6.1.4.1.52.1.6.4.10	INTEGER	read-only	Denotes the starting address of the firmware in RAM.
INT dlFirmwareStart	1.3.6.1.4.1.52.1.6.4.12	INTEGER	read-only	Denotes the start address of the firmware, in RAM, as established by the boot process.
INT dlFirmwareTop	1.3.6.1.4.1.52.1.6.4.11	INTEGER	read-only	Denotes the ending address of firmware in RAM.
INT dlFlashCount	1.3.6.1.4.1.52.1.6.4.9	INTEGER	read-only	Denotes the number of times that flash memory has been reprogrammed. This value is initialzed to 1, when the module is initially powered up.
INT dlFlashSize	1.3.6.1.4.1.52.1.6.4.8	INTEGER	read-only	Denotes the size, in bytes, of flash memory con- tained on this module.
INT dlForceBootp	1.3.6.1.4.1.52.1.6.4.14	INTEGER	read-write	When set, this variable forces the client to send a BOOTP request packet when rebooting. The client will make several attempts before timing out if a server does not respond. This variable stays set. When set to a 1 it should always be read as a one. When set to zero it should always be read as zero.
INT dlForceOnBoot	1.3.6.1.4.1.52.1.6.4.1	INTEGER	read-write	When set to a 1, the system will request a download, during the next system restart. If no server is found and the current image in flash memory is valid, the system will boot using the flash-resident image.
INT dlInitiateColdBoot	1.3.6.1.4.1.52.1.6.4.3	INTEGER	read-write	When written with a 1, the boot software intiates a system reboot. All MIB variables used to control the exact nature of the download should be set, prior to activating a system reset. A read always returns a 0.
STR dlLastImageFilename	1.3.6.1.4.1.52.1.6.4.6	DisplayString	read-only	Filename of the last image to be successfully loaded into memory.
IP dlLastServerIPAddress	1.3.6.1.4.1.52.1.6.4.7	IpAddress	read-only	The IP address of the server used to load the present image in flash memory.
IP dlNetAddress	1.3.6.1.4.1.52.1.6.4.18	IpAddress	read-write	IP Address of the server to be used when an image is to be downloaded using the Runtime TFTP Download.
INT dlOnLineDownLoad	1.3.6.1.4.1.52.1.6.4.16	INTEGER	read-write	During normal operation this object has the value of 1. By setting this object to a value of forceDownLoad(2) an online download will be performed. By setting this object to a value of forceDownLoadReset(3) an online down load will be performed and a reset will be forced upon successful completion of the download.
INT dlOperStatus	1.3.6.1.4.1.52.1.6.4.17	INTEGER	read-only	This object reflects the status of the download code. A value of normalOperation(3) reflects either a down load was started but has finished normally and no reset was specified or no down load has been started. A value of downLoadActive only appears while a down load is in progress. A value of downLoadCompleteError reflects that a down load was started however an error was detected.
OCT dlServerName	1.3.6.1.4.1.52.1.6.4.15	OCTET STRING	read-write	This OID is reserved for future use of the Bootp server name. This field can be used when a client wants to get boot information from a particular bootp server.
STR dlTFTPRequest	1.3.6.1.4.1.52.1.6.4.5	DisplayString	read-write	The filename requested of the server, when firmware is to be loaded across the network.
IP dlTFTPRequestHost	1.3.6.1.4.1.52.1.6.4.4	IpAddress	read-write	The IP address of the server to be used, when firmware is to be loaded across the network.
IP dlTftpServerGatewayIPAddress	1.3.6.1.4.1.52.1.6.4.21	IpAddress	read-write	The IP address of the gateway/router which connects this SNMP agent to the TFTP server.
eMME	1.3.6.1.4.1.52.1.6.2.9
INT eMMEBoardMap	1.3.6.1.4.1.52.1.6.2.9.4	INTEGER	read-only	Denotes a bit encoded representation of the slots that contain MIM boards. If a bit is a one then the board is present.
OCT eMMEFWRev	1.3.6.1.4.1.52.1.6.2.9.3	OCTET STRING	read-only	Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
PHY eMMEHWAddress	1.3.6.1.4.1.52.1.6.2.9.1	PhysAddress	read-only	The device's MAC address.
INT eMMEHWRev	1.3.6.1.4.1.52.1.6.2.9.2	INTEGER	read-only	Denotes the revision of the eMME board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
environment	1.3.6.1.4.1.52.1.6.1.4
fnb2	1.3.6.1.4.1.52.1.6.1.2
INT fnbBypass	1.3.6.1.4.1.52.1.6.1.2.1.1.1.4	INTEGER	read-write	Denotes the bypass status of the current Token Ring board. Bypassed means the board is NOT attached to the FNB.
INT fnbConnect	1.3.6.1.4.1.52.1.6.1.2.2.1.1.2	INTEGER	read-write	Denotes the connection status of the CSMA/CD board to the inter-RIC bus.
INT fnbConnectLeft	1.3.6.1.4.1.52.1.6.1.2.1.1.1.2	INTEGER	read-write	The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY).
INT fnbConnectRight	1.3.6.1.4.1.52.1.6.1.2.1.1.1.3	INTEGER	read-write	The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed, READ ONLY).
fnbCSMACD	1.3.6.1.4.1.52.1.6.1.2.2
fnbCSMACDEntry	1.3.6.1.4.1.52.1.6.1.2.2.1.1		not-accessible	An entry in the fnbCSMACDTable containing objects that provide FNB connection status for a CSMA/CD subsystem.
INT fnbCSMACDIndex	1.3.6.1.4.1.52.1.6.1.2.2.1.1.1	INTEGER	read-write	An unique value for each CSMACD subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization.
fnbCSMACDTable	1.3.6.1.4.1.52.1.6.1.2.2.1		not-accessible	A list of entries that provide connection status of CSMA/CD subsystems, for the FNB.
CTR fnbPortChanges	1.3.6.1.4.1.52.1.6.1.2.2.1.1.3	Counter	read-only	Denotes the number of times any port on the given MIM has changed it's connection to the inter-RIC bus.
fnbPortConnect	1.3.6.1.4.1.52.1.6.1.2.3
INT fnbPortConnectBoardIndex	1.3.6.1.4.1.52.1.6.1.2.3.1.1.1	INTEGER	read-only	An instance of a board for which this port assignment relationship exists.
INT fnbPortConnectCompID	1.3.6.1.4.1.52.1.6.1.2.3.1.1.4	INTEGER	read-only	This is the component ID as defined in the chassis MIB that this port is associated with. These components will be repeater components.
fnbPortConnectEntry	1.3.6.1.4.1.52.1.6.1.2.3.1.1		not-accessible	Describes a specific port connection entry.
CTR fnbPortConnectionChanges	1.3.6.1.4.1.52.1.6.1.2.3.2	Counter	read-only	Maintains the number of times any port within the mangement domain of this MIM changes it's port assignment.
INT fnbPortConnectPortAssignment	1.3.6.1.4.1.52.1.6.1.2.3.1.1.3	INTEGER	read-write	The specific channel that the port is assigned.
INT fnbPortConnectPortIndex	1.3.6.1.4.1.52.1.6.1.2.3.1.1.2	INTEGER	read-only	An instance of a port for which this assignment relationship exists.
fnbPortConnectTable	1.3.6.1.4.1.52.1.6.1.2.3.1		not-accessible	This table is used to control port association on ethernet devices. Only those boards that support port switching will be listed in this table.
INT fnbRPBypass	1.3.6.1.4.1.52.1.6.1.2.1.1.1.5	INTEGER	read-write	Denotes the Ring Port bypass status of the current Token Ring board. If this capability is not available on this board, the value 'other' is returned when read, and BADSETINFO when written.
fnbTR	1.3.6.1.4.1.52.1.6.1.2.1
fnbTREntry	1.3.6.1.4.1.52.1.6.1.2.1.1.1		not-accessible	An entry in the fnbTRTable containing objects that provide FNB connection status for a Token Ring sub- system.
INT fnbTRIndex	1.3.6.1.4.1.52.1.6.1.2.1.1.1.1	INTEGER	read-only	An unique value for each Token Ring subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization.
fnbTRTable	1.3.6.1.4.1.52.1.6.1.2.1.1		not-accessible	A list of entries that provide connection status of Token Ring subsystems, for the FNB.
fPRedund	1.3.6.1.4.1.52.1.6.2.10.1
INT fPRedundActivePort	1.3.6.1.4.1.52.1.6.2.10.1.7	INTEGER	read-write	Get/Set the front panel port you want to be active when front panel redundancy is enabled.
IP fPRedundAddAddr	1.3.6.1.4.1.52.1.6.2.10.1.5	IpAddress	read-write	Add an IP Address to the polling list for the front panel redundancy.
fPRedundAddrEntry	1.3.6.1.4.1.52.1.6.2.10.2.1		not-accessible	An entry in the fPRedundAddrTable providing objects for front panel redundancy.
INT fPRedundAddrId	1.3.6.1.4.1.52.1.6.2.10.2.1.1	INTEGER	read-only	A unique value identifying an element in a sequence of member IP Addresses which belong to the front panel redundancy. This value goes from 1 to the maximum number of IP Addresses which may be included in front panel redundancy.
IP fPRedundAddrIPAddr	1.3.6.1.4.1.52.1.6.2.10.2.1.2	IpAddress	read-only	Returns an IP Address associated with the front panel redundancy.
fPRedundAddrTable	1.3.6.1.4.1.52.1.6.2.10.2		not-accessible	A list of entries that provide IP address information for front panel redundancy.
fPRedundancy	1.3.6.1.4.1.52.1.6.2.10
IP fPRedundDelAddr	1.3.6.1.4.1.52.1.6.2.10.1.6	IpAddress	read-write	Delete an IP Address from the polling list for the front panel redundancy.
INT fPRedundEnable	1.3.6.1.4.1.52.1.6.2.10.1.8	INTEGER	read-write	If this object is set to enable, the front panel redundancy will be activated. If this object is set to disable, the front panel redundancy will be deactivated. When read, this object will returns the state of the object based on the last request made.
INT fPRedundNumAddr	1.3.6.1.4.1.52.1.6.2.10.1.4	INTEGER	read-only	Get the number of IP Addresses associated with front panel redundancy.
INT fPRedundPollInterval	1.3.6.1.4.1.52.1.6.2.10.1.2	INTEGER	read-write	Get/Set the number of seconds between polls for front panel redundancy.
INT fPRedundReset	1.3.6.1.4.1.52.1.6.2.10.1.1	INTEGER	read-write	If this object is set to Reset it will cause a reset of the front panel redundancy. Setting this object to NoReset will do nothing. This object will always be read as NoReset.
INT fPRedundRetrys	1.3.6.1.4.1.52.1.6.2.10.1.3	INTEGER	read-write	Get/Set the the number of unanswered polls allowed for the front panel redundancy before it switches ports.
iRM3	1.3.6.1.4.1.52.1.6.2.7
INT iRM3BPSupport	1.3.6.1.4.1.52.1.6.2.7.5	INTEGER	read-only	Denotes whether or not Backplane Protocol Support is present in the current version of the IRM3.
OCT iRM3FWRev	1.3.6.1.4.1.52.1.6.2.7.3	OCTET STRING	read-only	Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
PHY iRM3HWAddress	1.3.6.1.4.1.52.1.6.2.7.1	PhysAddress	read-only	The device's MAC address.
INT iRM3HWRev	1.3.6.1.4.1.52.1.6.2.7.2	INTEGER	read-only	Denotes the revision of the IRM3 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
INT iRM3PortAssoc	1.3.6.1.4.1.52.1.6.2.7.4	INTEGER	read-write	Controls how front panel ports are associated with the Irm3.
mRXI	1.3.6.1.4.1.52.1.6.2.6
OCT mRXIFWRev	1.3.6.1.4.1.52.1.6.2.6.3	OCTET STRING	read-only	Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
PHY mRXIHWAddress	1.3.6.1.4.1.52.1.6.2.6.1	PhysAddress	read-only	The device's MAC address.
INT mRXIHWRev	1.3.6.1.4.1.52.1.6.2.6.2	INTEGER	read-only	Denotes the revision of the mRXI board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
nB55	1.3.6.1.4.1.52.1.6.2.3
OCT nB55FWRev	1.3.6.1.4.1.52.1.6.2.3.3	OCTET STRING	read-only	Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
PHY nB55HWAddress	1.3.6.1.4.1.52.1.6.2.3.1	PhysAddress	read-only	The device's MAC address.
INT nB55HWRev	1.3.6.1.4.1.52.1.6.2.3.2	INTEGER	read-only	Denotes the revision of the nB55 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
powerEntry	1.3.6.1.4.1.52.1.6.1.4.1.1		not-accessible	An entry in the powerTable providing objects for a power supply.
OID powerSupplyId	1.3.6.1.4.1.52.1.6.1.4.1.1.3	OBJECT IDENTIFIER	read-only	Identifies the type of power supply. For example, this could be used to identify power supplies which support additional remote management capabilities.
INT powerSupplyNum	1.3.6.1.4.1.52.1.6.1.4.1.1.1	INTEGER	read-only	Denotes the power supply that may have failed.
INT powerSupplyRedun	1.3.6.1.4.1.52.1.6.1.4.1.1.4	INTEGER	read-only	Identifies whether power redundancy is available within the chassis. Devices that do not support power supply redundancy, will return infoNotAvailable.
INT powerSupplyRemoteDisable	1.3.6.1.4.1.52.1.6.1.4.1.1.5	INTEGER	read-write	Provides Enable/Disable control of the power supply. For devices that do not support this capability, a set attempt will return BADVALUE, and a read will always return infoNotAvailable.
INT powerSupplyState	1.3.6.1.4.1.52.1.6.1.4.1.1.2	INTEGER	read-only	Denotes the power supply's state.
powerTable	1.3.6.1.4.1.52.1.6.1.4.1		not-accessible	A list of power supply entries.
tRMM	1.3.6.1.4.1.52.1.6.2.8
OCT tRMMFWRev	1.3.6.1.4.1.52.1.6.2.8.3	OCTET STRING	read-only	Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
PHY tRMMHWAddress	1.3.6.1.4.1.52.1.6.2.8.1	PhysAddress	read-only	The device's MAC address.
INT tRMMHWRev	1.3.6.1.4.1.52.1.6.2.8.2	INTEGER	read-only	Denotes the revision of the tRMM board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
INT upsACLineVoltsIn	1.3.6.1.4.1.52.1.6.3.1.1.7	INTEGER	read-only	Denotes the input AC utility line voltage.
INT upsBatteryCapacity	1.3.6.1.4.1.52.1.6.3.1.1.6	INTEGER	read-only	Denotes the percentage of battery capacity left, 100% being a fully-charged battery.
INT upsBatteryVoltsOut	1.3.6.1.4.1.52.1.6.3.1.1.8	INTEGER	read-only	Denotes the battery voltage.
INT upsDisable	1.3.6.1.4.1.52.1.6.3.1.1.3	INTEGER	read-write	Allows the UPS to be disabled. A set turns of the UPS for those systems, so equipped. A get/get-next always returns 0.
INT upsDisconnect	1.3.6.1.4.1.52.1.6.3.1.1.4	INTEGER	read-write	Allows the UPS backup power system to conserve its battery. Setting the object to a value of 1 turns off the power system. A get/get-next always retuns a 0.
INT upsID	1.3.6.1.4.1.52.1.6.3.1.1.1	INTEGER	read-write	Denotes a type code which refers to the manufactur- ers and model of the UPS.
upsRevision	1.3.6.1.4.1.52.1.6.3.1.1
INT upsTest	1.3.6.1.4.1.52.1.6.3.1.1.5	INTEGER	read-write	Denotes the status performed on the UPS. A write unitOK(1) intiates the test. A read indicates status of test.
INT upsUpTime	1.3.6.1.4.1.52.1.6.3.1.1.2	INTEGER	read-only	Denotes the operating time, in hours, since the UPS was last powered on.
upsVersion	1.3.6.1.4.1.52.1.6.3.1

RFC description

Provides common enterprise-specific management objects for Cabletron network devices.

Start monitoring Cabletron/Enterasys switch/router (shared definitions module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CTRON-COMMON-MIB

What Is CTRON-COMMON-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description