CT-DAREGISTRY-MIB

All MIBs › CT-DAREGISTRY-MIB

Category: RADIUS and AAA, Vendor: Cabletron/Enterasys

Description: Manages Cabletron/Enterasys direct-attached registry for service discovery and resource registration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CT-DAREGISTRY-MIB?

CT-DAREGISTRY-MIB is a Cabletron Systems (built on CTRON-OIDS) proprietary MIB reporting Demand Access WAN firmware-component status. Its registry table, keyed by index, records the component instance, admin/operational status, last-change time, and a description. As a status MIB it lets an administrator confirm which Demand Access WAN firmware components are active on a Cabletron device. It is deployed on legacy Cabletron Systems Demand Access WAN equipment. Engineers can download the CT-DAREGISTRY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CT-DAREGISTRY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Cabletron Systems Demand Access WAN equipment

Monitoring Examples

An administrator checks ctDARegistryOperStatus to confirm a specific Demand Access WAN firmware component is operational on a Cabletron device.

What Can Be Monitored

Demand Access WAN firmware component status

Imported Objects

From CTRON-OIDS

cabletron

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
ctSSA	1.3.6.1.4.1.52.4497
ctDARegistryTable	1.3.6.1.4.1.52.4497.1		not-accessible	A list of Demand Access WAN firmware components.
ctDARegistryEntry	1.3.6.1.4.1.52.4497.1.1		not-accessible	An entry containing management information applicable to a particular subsystem.
INT ctDARegistryIndex	1.3.6.1.4.1.52.4497.1.1.1	INTEGER	read-only	This is the category for this object.
INT ctDARegistryInstance	1.3.6.1.4.1.52.4497.1.1.2	INTEGER	read-only	This is a unique instance within the category for this object.
INT ctDARegistryAdminStatus	1.3.6.1.4.1.52.4497.1.1.3	INTEGER	read-write	The desired state of the subsystem. The testing(3) state indicates that no operational functions can be passed. When a managed system initializes, all subsystems start with ctDARegistryAdminStatus in the up(1) state. As a result of either explicit management action or per configuration information retained by the managed system, ctDARegistryAdminStatus is then changed to either the dowm(2) or testing(3) states (or remains in the up(1) state).
INT ctDARegistryOperStatus	1.3.6.1.4.1.52.4497.1.1.4	INTEGER	read-only	The mandatory operational state of the subsystem. The testing(3) state indicates that no operational functions can be passed. If ctDARegistryAdminStatus is down(2) then ctDARegistryOperStatus should be down(2). If ctDARegistryAdminStatus is changed to up(1) then ctDARegistryOperStatus should change to up(1) if the subsystem is ready to function; it should change to dormant(5) if the subsystem is waiting for external actions; it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state. The notPresent state is a refinement on the down state which indicates that the relevant interface is down specifically because some component (typically, a hardware component) is not present in the managed system. The lowerLayerDown state is also a refinement on the down state. This new state indicates that this system runs on top of one or more interfaces (see ifStackTable) and that this system is down specifically because one or more of these lower-layer interfaces are down.
TIK ctDARegistryLastChange	1.3.6.1.4.1.52.4497.1.1.5	TimeTicks	read-only	The value of sysUpTime at the time the subsystem entered its mandatory operational state. If the mandatory state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
STR ctDARegistryDescr	1.3.6.1.4.1.52.4497.1.1.6	DisplayString	read-only	A textual string that identifies the subsystem.

RFC description

Cabletron MIB for Demand Access WAN firmware components registry.

Start monitoring Legacy Cabletron Demand Access WAN equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CT-DAREGISTRY-MIB

What Is CT-DAREGISTRY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description