CISCO-FC-FE-MIB :: fcIfActiveVsanUpList2k

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-FC-FE-MIBfcIfActiveVsanUpList2k

fcIfActiveVsanUpList2k

Module: CISCO-FC-FE-MIB

OID (symbolic): CISCO-FC-FE-MIB::fcIfActiveVsanUpList2k

OID (numeric): 1.3.6.1.4.1.9.9.289.1.1.2.1.29

Node type: OBJECT-TYPE

Type: FcList

Access: read-only

Description: The list of VSANs (in the range 0 through 2047) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, whose operational state is 'up', that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is operationally 'up' if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are operationally 'up'. VSAN 0 is reserved. This object is applicable to only ports operating in trunk mode.

What is fcIfActiveVsanUpList2k?

This read-only bitmap reports which VSANs numbered 0 through 2047 are currently operationally 'up' on this trunking port, useful for confirming which fabric segments are actively reachable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.29
snmpwalk -v2c -c public <target> CISCO-FC-FE-MIB::fcIfActiveVsanUpList2k

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.29.1
snmpget -v2c -c public <target> CISCO-FC-FE-MIB::fcIfActiveVsanUpList2k.1

Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FC-FE-MIB::fcIfActiveVsanUpList2k OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.289ciscoFcFeMIBCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1ciscoFcFeObjectsCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1cffFcFeConfigCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2fcIfTableCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1fcIfEntryCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1.29fcIfActiveVsanUpList2kCISCO-FC-FE-MIB