CISCO-FC-FE-MIB :: fcIfActiveVsanList4k

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-FC-FE-MIBfcIfActiveVsanList4k

fcIfActiveVsanList4k

Module: CISCO-FC-FE-MIB

OID (symbolic): CISCO-FC-FE-MIB::fcIfActiveVsanList4k

OID (numeric): 1.3.6.1.4.1.9.9.289.1.1.2.1.14

Node type: OBJECT-TYPE

Type: FcList

Access: read-only

Description: The list of VSANs (in the range 2048 through 4096) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2048 through 2055, the second octet specifying VSANs 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is active if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are active. This object is applicable to only ports operating in trunk mode.

What is fcIfActiveVsanList4k?

Reports which VSANs in the range 2048-4096 the trunking port is currently actively associated with.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.14
snmpwalk -v2c -c public <target> CISCO-FC-FE-MIB::fcIfActiveVsanList4k

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.14.1
snmpget -v2c -c public <target> CISCO-FC-FE-MIB::fcIfActiveVsanList4k.1

Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FC-FE-MIB::fcIfActiveVsanList4k OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.289ciscoFcFeMIBCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1ciscoFcFeObjectsCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1cffFcFeConfigCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2fcIfTableCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1fcIfEntryCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1.14fcIfActiveVsanList4kCISCO-FC-FE-MIB