CISCO-FC-FE-MIB :: fcIfPortRateMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-FC-FE-MIBfcIfPortRateMode

fcIfPortRateMode

Module: CISCO-FC-FE-MIB

OID (symbolic): CISCO-FC-FE-MIB::fcIfPortRateMode

OID (numeric): 1.3.6.1.4.1.9.9.289.1.1.2.1.31

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The rate of data traffic supported by this port.

'dedicated' - this interface is operating in dedicated rate mode. In dedicated rate mode each interface has an allocated fabric bandwidth to sustain line rate traffic at the maximum configured operating speed.

'shared' - this interface is operating in over subscription mode. In over subscription mode the available fabric bandwidth of a link is shared by more than one interface, so that multiple front panel ports share the same link internally to the switch fabric.

For modules that are capable of switching between 'dedicated' and 'shared' modes, certain restrictions apply based on the available bandwidth and speed. The keywords 'osm' and 'shared', 'frm' and 'dedicated' are interchangeable.

What is fcIfPortRateMode?

This read-write setting controls whether the Fibre Channel port operates in dedicated bandwidth mode (guaranteed line-rate fabric bandwidth) or another rate-sharing mode.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.31
snmpwalk -v2c -c public <target> CISCO-FC-FE-MIB::fcIfPortRateMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.31.1
snmpget -v2c -c public <target> CISCO-FC-FE-MIB::fcIfPortRateMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.31.1 i <value>

Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FC-FE-MIB::fcIfPortRateMode OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.289ciscoFcFeMIBCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1ciscoFcFeObjectsCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1cffFcFeConfigCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2fcIfTableCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1fcIfEntryCISCO-FC-FE-MIB
1.3.6.1.4.1.9.9.289.1.1.2.1.31fcIfPortRateModeCISCO-FC-FE-MIB