All MIBs › CISCO-FC-FE-MIB › fcIfAdminRxBbCreditExtended
fcIfAdminRxBbCreditExtended
Module: CISCO-FC-FE-MIB
OID (symbolic): CISCO-FC-FE-MIB::fcIfAdminRxBbCreditExtended
OID (numeric): 1.3.6.1.4.1.9.9.289.1.1.2.1.36
Node type: OBJECT-TYPE
Type: FcBbCredit
Access: read-write
Description: This object specifies the extended BB credits that can be configured on an FC port (in the range 256 through 4095). The acceptable value depends on the BB credit configuration of other ports in the line card. Since this is an optional feature, the value of this object can only be modified after (enabling extended credit feature) cfcFeatureCtrlIndex object is configured with a value of 'extenedCredit'. If extended credit feature is enabled, the MIB objects fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx values are not used; instead fcIfAdminRxBbCreditExtended is used regardless of port mode operation. If extended credit feature is disabled, the previous configured values of fcIfAdminRxBbCredit fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx are used as defined.
NOTE: This object can be modified only on certain modules having hardware capability to support the extended BB credit feature.
What is fcIfAdminRxBbCreditExtended?
This read-write setting configures the extended buffer-to-buffer credit value (256 to 4095) for the port when the optional extended-credit feature is enabled, allowing higher receive credit counts than standard mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.36 snmpwalk -v2c -c public <target> CISCO-FC-FE-MIB::fcIfAdminRxBbCreditExtended
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.36.1 snmpget -v2c -c public <target> CISCO-FC-FE-MIB::fcIfAdminRxBbCreditExtended.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.289.1.1.2.1.36.1 s <value>
Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FC-FE-MIB::fcIfAdminRxBbCreditExtended OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | CISCO-FC-FE-MIB |
| 1.3.6.1.4.1.9.9.289.1 | ciscoFcFeObjects | CISCO-FC-FE-MIB |
| 1.3.6.1.4.1.9.9.289.1.1 | cffFcFeConfig | CISCO-FC-FE-MIB |
| 1.3.6.1.4.1.9.9.289.1.1.2 | fcIfTable | CISCO-FC-FE-MIB |
| 1.3.6.1.4.1.9.9.289.1.1.2.1 | fcIfEntry | CISCO-FC-FE-MIB |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.36 | fcIfAdminRxBbCreditExtended | CISCO-FC-FE-MIB |