CADANT-CMTS-SYSTEM-MIB

All MIBs › CADANT-CMTS-SYSTEM-MIB

Organization: ARRIS Group, Inc.

Last Updated: 2015-11-11

Category: DOCSIS and Cable, Device Management, Vendor: ARRIS

Description: Manages system-level configuration including software version, boot parameters, and system identity on ARRIS/Cadant CMTS equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CADANT-CMTS-SYSTEM-MIB?

CADANT-CMTS-SYSTEM-MIB is an ARRIS proprietary MIB (successor to the Cadant name) defining system-wide DOCSIS timing and protocol parameters and constants on the Arris E6000 CMTS. Its objects configure synchronization interval, UCD (Upstream Channel Descriptor) interval, maximum pending MAPs, ranging interval, ranging/registration retry limits, and per-message processing-time constants used in DOCSIS cable-modem registration. As a configuration MIB it lets an administrator confirm the CMTS's DOCSIS timing parameters match vendor-recommended values when diagnosing cable-modem registration delays or failures. It is deployed on ARRIS E6000 CMTS platforms in cable operator head-ends. Engineers can download the CADANT-CMTS-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CADANT-CMTS-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS E6000 CMTS

Monitoring Examples

An administrator checks cadSysRangingInterval and cadSysInvitedRangingRetries against recommended DOCSIS timing values when a batch of cable modems is taking unusually long to complete ranging and registration.

What Can Be Monitored

DOCSIS timing intervals and registration retry limits

Imported Objects

From CADANT-PRODUCTS-MIB

cadSystem

OBJECT-IDENTITY

From CADANT-TC

AdminSrcAddrType
AdminState
CardId
OverloadThreshold
ServerType

From DOCS-IF-MIB

TenthdB

From DOCS-QOS3-MIB

BitRate

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv4
InetAddressIPv6
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString
SnmpEngineID

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using cadSysProcRouterControlGlobalPacketsReceivedPassed OID:

Select an ARRIS E6000 CMT as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cadSysProcRouterControlGlobalPacketsReceivedPassed into the Find box to locate it in the OID tree, then select it and click OK. The number of packets received passed to the Router Control processor. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 cadCosDnMaxLatency	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.9	Unsigned32	read-write	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxLatency
U32 cadCosDnMaxTrafficBurst	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.3	Unsigned32	read-write	The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
I32 cadCosDnMinReservedPkt	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.6	Integer32	read-write	The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt
BIT cadCosDnMinReservedRate	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.4	BitRate	read-write	The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedRate
BIT cadCosDnPeakTrafficRate	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.11	BitRate	read-write	Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the traffic is non-conforming to the policing parameters, and then the traffic will be shaped to the Tmax rate. If the peak rate is less than the Tmax for a flow, then all traffic for that flow will shaped to the Tmax rate. Setting the peak rate to a value of 0 will result in all flows being limited to Tmax at all times. Setting the peak rate to a value of 0xffffffff will result in flows having virtually unlimited bandwidth until their burst size is used up. This parameter only has meaning for flows on downstreams that are shaped.
I32 cadCosDnPriority	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.10	Integer32	read-write	The downstream channel priority to use. A -1 indicates that the current method of using the upstream channel priority should be used.
cadCosToQosMapping	1.3.6.1.4.1.4998.1.1.5.1.10
cadCosToQosMappingEntry	1.3.6.1.4.1.4998.1.1.5.1.10.9.1		not-accessible	This entry contains all of the data to map 1.0 COS to 1.1 QOS parameters.
I32 cadCosToQosMappingIndex	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.1	Integer32	not-accessible	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
cadCosToQosMappingTable	1.3.6.1.4.1.4998.1.1.5.1.10.9		not-accessible	Table of COS to QOS Mapping data
U32 cadCosUpMaxTrafficBurst	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.2	Unsigned32	read-write	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst
I32 cadCosUpMinReservedPkt	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.5	Integer32	read-write	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt
BIT cadCosUpPeakTrafficRate	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.12	BitRate	read-write	Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, then the traffic will be shaped to the peak rate until the traffic is non-conforming to the policing parameters, and then the traffic will be shaped to the Tmax rate. If the peak rate is less than the Tmax for a flow, then all traffic for that flow will shaped to the Tmax rate. Setting the peak rate to a value of 0 will result in all flows being limited to Tmax at all times. Setting the peak rate to a value of 0xffffffff will result in flows having virtually unlimited bandwidth until their burst size is used up. This parameter only has meaning for upstream flows.
OCT cadCosUpTosAndMask	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.7	OCTET STRING	read-write	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosAndMask
OCT cadCosUpTosOrMask	1.3.6.1.4.1.4998.1.1.5.1.10.9.1.8	OCTET STRING	read-write	The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosOrMask
cadLaesMdTimestampMode	1.3.6.1.4.1.4998.1.1.5.1.24
cadLaesMdTimestampModeEntry	1.3.6.1.4.1.4998.1.1.5.1.24.1.1		not-accessible	This entry contains the configured MD IPv4. If configured, then all encapsulated tap packets going to that MD will contain a timestamp in the tap header.
IP cadLaesMdTimestampModeInetAddr	1.3.6.1.4.1.4998.1.1.5.1.24.1.1.2	InetAddress	not-accessible	The IP Address of the Mediation Device.
IPt cadLaesMdTimestampModeInetAddrType	1.3.6.1.4.1.4998.1.1.5.1.24.1.1.1	InetAddressType	not-accessible	The IP Address type of Mediation Device
cadLaesMdTimestampModeTable	1.3.6.1.4.1.4998.1.1.5.1.24.1		not-accessible	Table of LAES Mediation Device Timestamp mode table
ROW cadLaesMdTimestampModRowStatus	1.3.6.1.4.1.4998.1.1.5.1.24.1.1.3	RowStatus	read-create	The row status of this entry
T/F cadMtcmConditionalOverride	1.3.6.1.4.1.4998.1.1.5.1.1.48	TruthValue	read-write	If set to 'true', for a MAC Domain configured for MTCM enabled operation, the E6000 will set a registering MTCM-capable CM to be MTCM disabled (via REG-RSP message) unless at least one of the config file's service flows was specifically configured to have the Bonded bit set in the Required attribute mask (in which case the CM will be set to MTCM enabled). If set to false, standard DOCSIS 3.0 operation will result.
cadSnmpRemoteEngineEntry	1.3.6.1.4.1.4998.1.1.5.1.4.4.1		not-accessible	Entry containing information of remote SNMP engines.
SNM cadSnmpRemoteEngineID	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.3	SnmpEngineID	read-create	An SNMP engine's administratively-unique identifier of a remote SNMP engine with which this user can communicate.
IP cadSnmpRemoteEngineIpAddress	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.1	IpAddress	not-accessible	The IP address of a remote SNMP engine with which this user can communicate.
I32 cadSnmpRemoteEnginePortNumber	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.2	Integer32	not-accessible	The UDP port of a remote SNMP engine with which this user can communicate.
ROW cadSnmpRemoteEngineStatus	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.6	RowStatus	read-create	The status of this conceptual row.
cadSnmpRemoteEngineTable	1.3.6.1.4.1.4998.1.1.5.1.4.4		not-accessible	Table containing information of remote SNMP engines.
INT cadSnmpRemoteEngineType	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.5	INTEGER	read-only	The type to indicate the remote engineID is manually configured or internally detected via SNMP V3 Informs probe response.
STR cadSnmpRemoteUserName	1.3.6.1.4.1.4998.1.1.5.1.4.4.1.4	SnmpAdminString	read-create	A human readable string representing the name of the user of a remote SNMP engine.
T/F cadSys1x1onCmAcPwrLossEnabled	1.3.6.1.4.1.4998.1.1.5.1.1.60	TruthValue	read-write	This object enables/disables the CMTS reaction to a AC Power Loss CM-STATUS. If true, the CMTS will wait until cadSys1x1onCmAcPwrLossHoldoff expires, and then the CMTS will place the CM into a 1x1 (US/DS) channel mode to conserve CM battery power. If false, the CMTS will not place a CM that reports an AC Power Loss into 1x1 mode.
IP cadSysActiveIpAddress	1.3.6.1.4.1.4998.1.1.5.1.1.25	IpAddress	read-write	Ip Address of the active control complex.
T/F cadSysAES128Enable	1.3.6.1.4.1.4998.1.1.5.1.1.62	TruthValue	read-write	Enables AES-128 Cryptography Suite for BPI+ when true.
T/F cadSysAllow10CmConcatenation	1.3.6.1.4.1.4998.1.1.5.1.1.30	TruthValue	read-write	Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize concatenation. If this value is false and a modem operating in 1.0 mode sends up a modem capability indicating concatenation the E6000 will respond by turning that capability off. If this value is true the modem will be returned whatever it requests (on or off).
T/F cadSysAllow10CmFragmentation	1.3.6.1.4.1.4998.1.1.5.1.1.31	TruthValue	read-write	Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize fragmentation. If this value is false and a modem operating in 1.0 mode sends up a modem capability indicating fragmentation the E6000 will respond by turning that capability off. If this value is true the modem will be returned whatever it requests (on or off).
T/F cadSysAllowAmbiguityOverride	1.3.6.1.4.1.4998.1.1.5.1.1.55	TruthValue	read-write	This object enables ambiguity resolution channel-override actions.
T/F cadSysAutoRecoveryEnable	1.3.6.1.4.1.4998.1.1.5.1.1.24	TruthValue	read-write	Enable automatic recovery of card/port/software in case of component failure.
cadSysBanner	1.3.6.1.4.1.4998.1.1.5.1.15
cadSysBannerExecEntry	1.3.6.1.4.1.4998.1.1.5.1.15.3.1		not-accessible
I32 cadSysBannerExecLine	1.3.6.1.4.1.4998.1.1.5.1.15.3.1.1	Integer32	not-accessible	Index of this banner line.
ROW cadSysBannerExecRowStatus	1.3.6.1.4.1.4998.1.1.5.1.15.3.1.3	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
cadSysBannerExecTable	1.3.6.1.4.1.4998.1.1.5.1.15.3		not-accessible
STR cadSysBannerExecText	1.3.6.1.4.1.4998.1.1.5.1.15.3.1.2	DisplayString	read-create	Ascii text of this banner line.
cadSysBannerIncomingEntry	1.3.6.1.4.1.4998.1.1.5.1.15.4.1		not-accessible
I32 cadSysBannerIncomingLine	1.3.6.1.4.1.4998.1.1.5.1.15.4.1.1	Integer32	not-accessible
ROW cadSysBannerIncomingRowStatus	1.3.6.1.4.1.4998.1.1.5.1.15.4.1.3	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
cadSysBannerIncomingTable	1.3.6.1.4.1.4998.1.1.5.1.15.4		not-accessible
STR cadSysBannerIncomingText	1.3.6.1.4.1.4998.1.1.5.1.15.4.1.2	DisplayString	read-create
cadSysBannerLoginEntry	1.3.6.1.4.1.4998.1.1.5.1.15.2.1		not-accessible	Describes a line in the login banner
I32 cadSysBannerLoginLine	1.3.6.1.4.1.4998.1.1.5.1.15.2.1.1	Integer32	not-accessible	The line number
ROW cadSysBannerLoginRowStatus	1.3.6.1.4.1.4998.1.1.5.1.15.2.1.3	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
cadSysBannerLoginTable	1.3.6.1.4.1.4998.1.1.5.1.15.2		not-accessible	Table describing the login banner that is displayed after the MOTD banner and before the login: prompt
STR cadSysBannerLoginText	1.3.6.1.4.1.4998.1.1.5.1.15.2.1.2	DisplayString	read-create	The login banner text
cadSysBannerMotdEntry	1.3.6.1.4.1.4998.1.1.5.1.15.1.1		not-accessible	Describes a line in the MOTD banner
I32 cadSysBannerMotdLine	1.3.6.1.4.1.4998.1.1.5.1.15.1.1.1	Integer32	not-accessible	The line number
ROW cadSysBannerMotdRowStatus	1.3.6.1.4.1.4998.1.1.5.1.15.1.1.3	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
cadSysBannerMotdTable	1.3.6.1.4.1.4998.1.1.5.1.15.1		not-accessible	Table describing the MOTD banner that is displayed before the login: prompt
STR cadSysBannerMotdText	1.3.6.1.4.1.4998.1.1.5.1.15.1.1.2	DisplayString	read-create	The MOTD banner text
I32 cadSysBootBaud	1.3.6.1.4.1.4998.1.1.5.1.5.13	Integer32	read-only	Baud rate of front panel serial port
IP cadSysBootDefaultGateway	1.3.6.1.4.1.4998.1.1.5.1.5.6	IpAddress	read-write	Default gateway
IP cadSysBootFpBIpAddress	1.3.6.1.4.1.4998.1.1.5.1.5.15	IpAddress	read-write	Ip address of E6000 side B front panel ethernet port
IP cadSysBootFpIpAddress	1.3.6.1.4.1.4998.1.1.5.1.5.2	IpAddress	read-write	Ip address of E6000 front panel ethernet port
IP cadSysBootFpSubnetMask	1.3.6.1.4.1.4998.1.1.5.1.5.3	IpAddress	read-write	E6000 front port interface subnet mask
MAC cadSysBootMacAddress	1.3.6.1.4.1.4998.1.1.5.1.5.1	MacAddress	read-only	Mac address of system controller
cadSysBootParams	1.3.6.1.4.1.4998.1.1.5.1.5
cadSysBootParamsGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.5			System boot parameters objects
OCT cadSysBootParity	1.3.6.1.4.1.4998.1.1.5.1.5.16	OCTET STRING	read-only	Serial parity of console port. Valid values are N (no parity), E (even parity), and O (odd parity).
I32 cadSysBootSelection	1.3.6.1.4.1.4998.1.1.5.1.5.12	Integer32	read-only	Bootloader to use (1 or 2)
INT cadSysBootStartupApplication	1.3.6.1.4.1.4998.1.1.5.1.5.10	INTEGER	read-only	Startup mode of the E6000
I32 cadSysBootStartupDelay	1.3.6.1.4.1.4998.1.1.5.1.5.11	Integer32	read-only	Delay (in seconds) allowing changes before booting application
I32 cadSysBootTimeOffset	1.3.6.1.4.1.4998.1.1.5.1.5.7	Integer32	read-only	Time offset (seconds) from UTC
IP cadSysBootTimeServer	1.3.6.1.4.1.4998.1.1.5.1.5.8	IpAddress	read-only	Ip address of TOD server
INT cadSysBootTimeServerConnType	1.3.6.1.4.1.4998.1.1.5.1.5.9	INTEGER	read-only	Protocol (tcp/udp) used to connect to TOD server
I32 cadSysCMConfiguration	1.3.6.1.4.1.4998.1.1.5.1.1.9	Integer32	read-write	Maximum time allowed for a CM, following receipt of a configuration file, to send a Registration Request to a CMTS.
I32 cadSysCMMAPProcessingTime	1.3.6.1.4.1.4998.1.1.5.1.1.7	Integer32	read-only	Time provided between arrival of the last bit of a MAP at a CM and effectiveness of that MAP. (ref 7.1.1)
I32 cadSysCMRangingResponseProcessingTime	1.3.6.1.4.1.4998.1.1.5.1.1.8	Integer32	read-only	Minimum tile allowed fro a CM following receipt of a rangin response before it is expected to reply to an invited ranging request.
DAT cadSysConfigSaveTime	1.3.6.1.4.1.4998.1.1.5.1.9.1	DateAndTime	read-only	The date and time of the last write of the configuration to nvram.
cadSysConfiguration	1.3.6.1.4.1.4998.1.1.5.1.9
cadSysConfigurationGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.8			Configuration objects
STR cadSysContact	1.3.6.1.4.1.4998.1.1.5.1.2.1	DisplayString	read-only	The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
cadSysControl	1.3.6.1.4.1.4998.1.1.5.1.3
cadSysControlGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.3			System control objects
U32 cadSysCountsCollectionRate	1.3.6.1.4.1.4998.1.1.5.1.1.27	Unsigned32	read-write	The period, in minutes, in which every count in the CMTS is to be collected. If this object is set to 0, counts collection will be disabled.
T/F cadSysCpeHostAuthorization	1.3.6.1.4.1.4998.1.1.5.1.1.44	TruthValue	read-write	This variable enables the CPE Host Authorization feature.
cadSysDataServer	1.3.6.1.4.1.4998.1.1.5.1.21
U32 cadSysDataServerDataEventsPerCycle	1.3.6.1.4.1.4998.1.1.5.1.21.2	Unsigned32	read-write	Number of data events allowed per cycle.
U32 cadSysDataServerDataSyncTimeout	1.3.6.1.4.1.4998.1.1.5.1.21.3	Unsigned32	read-write	Number of data events allowed per cycle.
U32 cadSysDataServerDataTimeout	1.3.6.1.4.1.4998.1.1.5.1.21.1	Unsigned32	read-write	Time allowed for Data Query/Update to be processed.
cadSysDataServerGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.9			Configuration objects
U32 cadSysDataServerLoPriDataEventsPerCycle	1.3.6.1.4.1.4998.1.1.5.1.21.8	Unsigned32	read-write	This value is the maximum number of Low Priority Sync events to be processed per cycle.
T/F cadSysDataServerSnmpReadAheadEnable	1.3.6.1.4.1.4998.1.1.5.1.21.4	TruthValue	read-write	When this value is set to true Snmp read ahead is performed.
U32 cadSysDataServerSnmpReadAheadMax	1.3.6.1.4.1.4998.1.1.5.1.21.5	Unsigned32	read-write	This value is the maximum number of records to read ahead
U32 cadSysDataServerSnmpRefreshTime	1.3.6.1.4.1.4998.1.1.5.1.21.6	Unsigned32	read-write	This value represents how old a database record can be to be used.
U32 cadSysDataServerSyncDataEventsPerCycle	1.3.6.1.4.1.4998.1.1.5.1.21.7	Unsigned32	read-write	This value is the maximum number of Sync events that will be processed per cycle.
I32 cadSysDCCREQRetries	1.3.6.1.4.1.4998.1.1.5.1.1.21	Integer32	read-only	Number of retries on Dynamic Channel Change Request.
T/F cadSysDelayedCpeLearning	1.3.6.1.4.1.4998.1.1.5.1.1.49	TruthValue	read-write	This setting only applies to modems that have BPI enabled. When set to false(2), CPE learning is enabled during registration when BPI initialization is initiated for those modems using BPI. When set to true(1), CPE learning is delayed during registration until BPI initialization is complete for those modems using BPI. For modems not using BPI, CPE learning is enabled when registration is complete.
cadSysDictionary	1.3.6.1.4.1.4998.1.1.5.1.8
U32 cadSysDictionaryCurrentVer	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.5	Unsigned32	read-only	Current internal dynamic version number of the MIB table.
T/F cadSysDictionaryDynamic	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.3	TruthValue	read-only	Indicates whether table is persistent or volatile only.
cadSysDictionaryEntry	1.3.6.1.4.1.4998.1.1.5.1.8.1.1		not-accessible	Describes the internal state of an individual table.
U32 cadSysDictionaryModuleVer	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.7	Unsigned32	read-only	Current internal version number of the schema of the MIB table.
STR cadSysDictionaryName	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.2	DisplayString	read-only	Internal name for this MIB data.
I32 cadSysDictionaryNumberEntries	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.4	Integer32	read-only	Current number of rows contained in the MIB table.
U32 cadSysDictionaryPersistentVer	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.6	Unsigned32	read-only	Current internal version number of the MIB table on flash.
cadSysDictionaryTable	1.3.6.1.4.1.4998.1.1.5.1.8.1		not-accessible	Table describing internal state of database.
U32 cadSysDictionaryTableId	1.3.6.1.4.1.4998.1.1.5.1.8.1.1.1	Unsigned32	not-accessible	Internal identifier for this MIB data.
I32 cadSysDSxRequestRetries	1.3.6.1.4.1.4998.1.1.5.1.1.13	Integer32	read-only	Number of Timeout Retries on DSA/DSC/DSD Requests.
I32 cadSysDSxResponseRetries	1.3.6.1.4.1.4998.1.1.5.1.1.14	Integer32	read-only	Number of Timeout Retries on DSA/DSC/DSD Responses.
INT cadSysEnableAuthenTraps	1.3.6.1.4.1.4998.1.1.5.1.4.1	INTEGER	read-write	Indicates whether the SNMP entity is permitted to generate authentication traps.
T/F cadSysEraseMem	1.3.6.1.4.1.4998.1.1.5.1.3.2	TruthValue	read-write	This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in persistent memory (NVRAM) is erased.
T/F cadSysFanSpeedControlEnable	1.3.6.1.4.1.4998.1.1.5.1.1.34	TruthValue	read-write	Enable automatic fan speed control.
I32 cadSysFanSpeedLevel	1.3.6.1.4.1.4998.1.1.5.1.1.59	Integer32	read-write	Set the fan speed for the chassis.
I32 cadSysFlapListInsertionThreshold	1.3.6.1.4.1.4998.1.1.5.1.1.61	Integer32	read-write	This object shows the number of seconds between successive ranging attempts that must pass before the modem is counted as flapped. The modem must have also been in a provisioning or registered state before the ranging request.
TEN cadSysFlaplistPowerAdjustThreshold	1.3.6.1.4.1.4998.1.1.5.1.1.35	TenthdB	read-write	The threshold is used to monitor the power adjust in the flap list. For a range request received that results in a power adjust exceeding the threshold value will cause the counter cadIfCmtsCmCountsPowerAdjExceedsThreshold to be incremented. If the threshold is set to 0, the monitoring of power adjustment in the flap list is disabled.
cadSysImage	1.3.6.1.4.1.4998.1.1.5.1.7
I32 cadSysImageComponentCount	1.3.6.1.4.1.4998.1.1.5.1.7.4	Integer32	read-only	Image component count for current E6000 image
STR cadSysImageFile	1.3.6.1.4.1.4998.1.1.5.1.7.1	DisplayString	read-only	Image filename for current E6000 image
cadSysImageGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.7			System image status objects
I32 cadSysImageId	1.3.6.1.4.1.4998.1.1.5.1.7.2	Integer32	read-only	Image identifier for current E6000 image
STR cadSysImageName	1.3.6.1.4.1.4998.1.1.5.1.7.3	DisplayString	read-only	Image name for current E6000 image
I32 cadSysInvitedRangingRetries	1.3.6.1.4.1.4998.1.1.5.1.1.5	Integer32	read-only	Number of retries on inviting ranging requests. (ref 9.2.4)
cadSysKeyChain	1.3.6.1.4.1.4998.1.1.5.1.11
OCT cadSysKeyChainKey	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.3	OCTET STRING	read-create	The key string.
T/F cadSysKeyChainKeyAcceptInfiniteLifetime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.6	TruthValue	read-create	If this value is set to true, the key has an infinite lifetime for received packets. Otherwise use the accept start and stop time to determine the lifetime.
DAT cadSysKeyChainKeyAcceptStartTime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.4	DateAndTime	read-create	The start time when this key is valid for received packets.
DAT cadSysKeyChainKeyAcceptStopTime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.5	DateAndTime	read-create	The stop time when this key is no longer valid for received packets.
cadSysKeyChainKeyEntry	1.3.6.1.4.1.4998.1.1.5.1.11.1.1		not-accessible	Describes the provisioned data for a key in a key-chain.
ROW cadSysKeyChainKeyRowStatus	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.10	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
T/F cadSysKeyChainKeySendInfiniteLifetime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.9	TruthValue	read-create	If this value is set to true, the key has an infinite lifetime for sending packets. Otherwise use the send start and stop time to determine the lifetime.
DAT cadSysKeyChainKeySendStartTime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.7	DateAndTime	read-create	The start time when this key is valid for sending packets.
DAT cadSysKeyChainKeySendStopTime	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.8	DateAndTime	read-create	The stop time when this key is no longer valid for sending packets.
U32 cadSysKeyChainKeySequenceId	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.2	Unsigned32	not-accessible	The sequence id of the key.
cadSysKeyChainKeyTable	1.3.6.1.4.1.4998.1.1.5.1.11.1		not-accessible	Table describing key-chain key provisioned data.
OCT cadSysKeyChainName	1.3.6.1.4.1.4998.1.1.5.1.11.1.1.1	OCTET STRING	not-accessible	The key-chain name.
INT cadSysLicenseAnnex	1.3.6.1.4.1.4998.1.1.5.1.23.4	INTEGER	not-accessible	This attribute defines the ITU-J-83 Annex being used for this E6000 CMTS License.
CAR cadSysLicenseCardId	1.3.6.1.4.1.4998.1.1.5.1.23.1	CardId	not-accessible	CAM to be licensed.
cadSysLicenseControl	1.3.6.1.4.1.4998.1.1.5.1.23
OCT cadSysLicenseKey	1.3.6.1.4.1.4998.1.1.5.1.23.2	OCTET STRING	not-accessible	License key to apply to the CAM.
I32 cadSysLicensePorts	1.3.6.1.4.1.4998.1.1.5.1.23.3	Integer32	not-accessible	Number of CAM ports associated with the license.
INT cadSysLicenseStatus	1.3.6.1.4.1.4998.1.1.5.1.23.5	INTEGER	read-only	Current status of licensing operation.
T/F cadSysLO1LeakDetect	1.3.6.1.4.1.4998.1.1.5.1.1.47	TruthValue	read-write	This variable controls LO1 leak detection on the DMM.
STR cadSysLocation	1.3.6.1.4.1.4998.1.1.5.1.2.3	DisplayString	read-only	The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
T/F cadSysMacMoveBlockedOnRcptDhcpPkt	1.3.6.1.4.1.4998.1.1.5.1.1.57	TruthValue	read-write	MAC movement is blocked on receipt of DHCP packets
I32 cadSysMaxMAPPending	1.3.6.1.4.1.4998.1.1.5.1.1.3	Integer32	read-only	The number of mini-slots that a CMTS is allowed to map into the future. (ref 6.3.4)
I32 cadSysMaxQoSActiveTimeout	1.3.6.1.4.1.4998.1.1.5.1.1.28	Integer32	read-write	Defines the maximum QoS Active Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead in the response (Reference DOCSIS RFI Section c.2.2.5.6). Note a value of 0 is infinite and is therefore treated as the largest value in the range.
I32 cadSysMaxQoSAdmittedTimeout	1.3.6.1.4.1.4998.1.1.5.1.1.29	Integer32	read-write	Defines the maximum QoS Admitted Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead in the response (Reference DOCSIS RFI Section c.2.2.5.7). Note a value of 0 is infinite and is therefore treated as the largest value in the range.
I32 cadSysMaxTrafBurstFor11CMs	1.3.6.1.4.1.4998.1.1.5.1.1.33	Integer32	read-write	This is the default value that will be used to populate the Maximum Traffic Burst for a 1.1 modem unless the maximum traffic burst TLV is explicitly provided in either the modems Request or in a Service Class Name definition. This value is being made programmable for 2 reasons: 1) So that it can be set to the DOCSIS default of 3044 for CableLabs testing and 2) it can be tuned for real world applications.
I32 cadSysMaxUcdBurstLength	1.3.6.1.4.1.4998.1.1.5.1.1.46	Integer32	read-write	This variable limits the maximum UCD burst length.
OCT cadSysMICAuthString	1.3.6.1.4.1.4998.1.1.5.1.1.23	OCTET STRING	read-write	Encrypted MIC Authentication
T/F cadSysMICEnable	1.3.6.1.4.1.4998.1.1.5.1.1.22	TruthValue	read-write	Enable MIC checking on the CMTS.
cadSysMICSecondarySecretEntry	1.3.6.1.4.1.4998.1.1.5.1.25.1.1		not-accessible	Entry containing secondary shared secret strings for cable modem configuration file authentication.
INT cadSysMICSecondarySecretIndex	1.3.6.1.4.1.4998.1.1.5.1.25.1.1.1	INTEGER	not-accessible	Internal index for this MIB row.
ROW cadSysMICSecondarySecretStatus	1.3.6.1.4.1.4998.1.1.5.1.25.1.1.3	RowStatus	read-create	The status of this conceptual row.
OCT cadSysMICSecondarySecretString	1.3.6.1.4.1.4998.1.1.5.1.25.1.1.2	OCTET STRING	read-create	Encrypted MIC Authentication shared secret string.
cadSysMICSecondarySecretTable	1.3.6.1.4.1.4998.1.1.5.1.25.1		not-accessible	Table containing secondary shared secret strings for cable modem configuration file authentication. This table is not used unless cadSysMICEnable is set to true.
I32 cadSysMiniSlotSize	1.3.6.1.4.1.4998.1.1.5.1.1.12	Integer32	read-only	Size of mini-slotfor upstream transmission. Must be a power of 2 (in units of the Timebase Tick).
U32 cadSysModemLossThreshold	1.3.6.1.4.1.4998.1.1.5.1.1.40	Unsigned32	read-write	Minimum modem threshold triggering detection of an upstream channel lockup.
T/F cadSysModPriDsInRccEnabled	1.3.6.1.4.1.4998.1.1.5.1.1.52	TruthValue	read-write	Enable modifying primary Downstream channel in RCC of Reg-Rsp-MP. Refer ECN 690.
U32 cadSysMtceBasePingRate	1.3.6.1.4.1.4998.1.1.5.1.19.11	Unsigned32	read-write	Interval between system maintenance polling of monitored threads.
U32 cadSysMtceDULPacketInterval	1.3.6.1.4.1.4998.1.1.5.1.19.14	Unsigned32	read-write	Interval between maintenance polling of monitored BroadCom devices. Setting the value to zero will disable BroadCom device monitoring.
OVE cadSysMtceOvSensitivity	1.3.6.1.4.1.4998.1.1.5.1.19.12	OverloadThreshold	read-write	Defines the sensitivity of user overload to changes in internal work load. Higher sensitivity results in more rapid change of user overload in response to a change in the internal work load.
OVE cadSysMtceOvThreshold	1.3.6.1.4.1.4998.1.1.5.1.19.13	OverloadThreshold	read-write	Defines the overall threshold of user overload transitions. Higher thresholds require a longer time in an internal overload state before user overload transitions occur.
cadSysMtceParams	1.3.6.1.4.1.4998.1.1.5.1.19
U32 cadSysMtceStatusCloneInitThreshold	1.3.6.1.4.1.4998.1.1.5.1.19.9	Unsigned32	read-write	Timeout on initialization for first status message.
U32 cadSysMtceStatusCloneMonitorThreshold	1.3.6.1.4.1.4998.1.1.5.1.19.8	Unsigned32	read-write	Timeout during normal operation.
U32 cadSysMtceStatusCloneRcvyThreshold	1.3.6.1.4.1.4998.1.1.5.1.19.10	Unsigned32	read-write	Timeout following clone side recovery.
STR cadSysName	1.3.6.1.4.1.4998.1.1.5.1.2.2	DisplayString	read-only	An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
cadSysParams	1.3.6.1.4.1.4998.1.1.5.1.1
cadSysParamsGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.1			System parameter objects
STR cadSysPatchParamDescription	1.3.6.1.4.1.4998.1.1.5.1.17.1.1.4	DisplayString	read-create	The patch parameter description.
cadSysPatchParamEntry	1.3.6.1.4.1.4998.1.1.5.1.17.1.1		not-accessible	Entry of an individual patch parameter.
I32 cadSysPatchParamIndex	1.3.6.1.4.1.4998.1.1.5.1.17.1.1.1	Integer32	not-accessible	The patch parameter index.
STR cadSysPatchParamName	1.3.6.1.4.1.4998.1.1.5.1.17.1.1.2	DisplayString	read-create	The patch parameter name.
ROW cadSysPatchParamRowStatus	1.3.6.1.4.1.4998.1.1.5.1.17.1.1.5	RowStatus	read-create	The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following states - active, createAndGo, and destroy. Other three states notInService, notReady and createAndWait are not permitted.
cadSysPatchParams	1.3.6.1.4.1.4998.1.1.5.1.17
cadSysPatchParamTable	1.3.6.1.4.1.4998.1.1.5.1.17.1		not-accessible	Table of patch parameters.
STR cadSysPatchParamValue	1.3.6.1.4.1.4998.1.1.5.1.17.1.1.3	DisplayString	read-create	The patch parameter value.
BIT cadSysPeakTrafRateFor11CMs	1.3.6.1.4.1.4998.1.1.5.1.1.41	BitRate	read-write	This is the default value that will be used to populate the Peak Traffic Rate for a 1.1 modem configuration file unless the peak traffic rate is explicitly provided by a Service Class Name definition.
T/F cadSysPeakTrRateUpstream	1.3.6.1.4.1.4998.1.1.5.1.1.54	TruthValue	read-write	This object enables support for Peak Traffic Rate in the upstream direction.
I32 cadSysPercentAddtlDsBwAllocated	1.3.6.1.4.1.4998.1.1.5.1.1.32	Integer32	read-write	This value of this setting is used to make a percentage increase to a dynamic downstream service flows maximum traffic rate. This is flexiblity actually causes the E6000 to operate outside the DOCSIS 1.1 specification by allocating and allowing more traffic than was actually requested. The initial reason for providing this capability is to mask problems produced in the Voice environment where devices have been seen to violate the traffic rates. Examples of this are MTAs that overuse the QI bit for long durations thus overdriving the downstream burst interval and the Neura IPDT gateway introducing an additional 0.5% inband signaling to the DS voice flow
U32 cadSysProcArpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.2	Unsigned32	read-write	The maximum permitted ARP packet rate to the Router Control processor.
C32 cadSysProcArpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.5	Counter32	read-only	The number of ARP packets received that are dropped.
C32 cadSysProcArpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.4	Counter32	read-only	The number of ARP packets received passed to the processor.
U32 cadSysProcBgpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.17	Unsigned32	read-write	The maximum permitted BGP packet throttle rate to the Router Control processor.
C32 cadSysProcBgpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.50	Counter32	read-only	The number of BGP packets received that are dropped.
C32 cadSysProcBgpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.49	Counter32	read-only	The number of BGP packets received passed to the processor.
T/F cadSysProcClearPolicingCounts	1.3.6.1.4.1.4998.1.1.5.1.13.35	TruthValue	read-write	This variable always returns false(2) upon reading. When set to true(1), all objects under cadSysProcPolicingCounts are cleared.
U32 cadSysProcCopsPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.20	Unsigned32	read-write	The maximum permitted Cops packet throttle rate to the Router Control processor.
C32 cadSysProcCopsPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.59	Counter32	read-only	The number of COPS packets received that are dropped.
C32 cadSysProcCopsPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.58	Counter32	read-only	The number of COPS packets received passed to the System Control processor.
U32 cadSysProcDhcpIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.14	Unsigned32	read-write	The maximum permitted DHCP (Ipv6) packet throttle rate to the Router Control processor.
C32 cadSysProcDhcpIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.41	Counter32	read-only	The number of DHCP(IPv6) packets received that are dropped.
C32 cadSysProcDhcpIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.40	Counter32	read-only	The number of DHCP(Ipv6) packets received passed to the processor.
U32 cadSysProcDhcpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.3	Unsigned32	read-write	The maxmimu permitted DHCP packet rate to the Router Control processor.
C32 cadSysProcDhcpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.8	Counter32	read-only	The number of DHCP packets received that are dropped.
C32 cadSysProcDhcpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.7	Counter32	read-only	The number of DHCP packets received passed to the processor.
U32 cadSysProcErmRpcPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.39	Unsigned32	read-write	The maximum permitted RPC packet rate from an RPC ERM processor.
C32 cadSysProcErmRpcPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.100	Counter32	read-only	The number of ERM RPC packets received that are dropped.
C32 cadSysProcErmRpcPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.99	Counter32	read-only	The number of ERM RPC packets received passed to the processor.
U32 cadSysProcEventArpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.28	Unsigned32	read-write	The maximum permitted ARP event packet rate to the Router Control processor.
C32 cadSysProcEventArpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.82	Counter32	read-only	The number of ARP event packets received that are dropped.
C32 cadSysProcEventArpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.81	Counter32	read-only	The number of ARP event packets received passed to the processor.
U32 cadSysProcEventDadPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.32	Unsigned32	read-write	The maximum permitted DAD event packet rate to the Router Control processor.
C32 cadSysProcEventDadPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.90	Counter32	read-only	The number of DAD event packets received that are dropped.
C32 cadSysProcEventDadPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.89	Counter32	read-only	The number of DAD event packets received passed to the processor.
U32 cadSysProcEventDefaultPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.33	Unsigned32	read-write	The maximum permitted Default event packet rate to the Router Control processor.
C32 cadSysProcEventDefaultPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.92	Counter32	read-only	The number of Default event packets received that are dropped.
C32 cadSysProcEventDefaultPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.91	Counter32	read-only	The number of Default event packets received passed to the processor.
U32 cadSysProcEventIcmpIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.26	Unsigned32	read-write	The maximum permitted ICMP (IPv6) event packet rate to the Router Control processor.
C32 cadSysProcEventIcmpIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.78	Counter32	read-only	The number of ICMP (IPv6) event packets received that are dropped.
C32 cadSysProcEventIcmpIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.77	Counter32	read-only	The number of ICMP (IPv6) event packets received passed to the processor.
U32 cadSysProcEventIcmpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.24	Unsigned32	read-write	The maximum permitted ICMP event packet rate to the Router Control processor.
C32 cadSysProcEventIcmpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.74	Counter32	read-only	The number of ICMP event packets received that are dropped.
C32 cadSysProcEventIcmpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.73	Counter32	read-only	The number of ICMP event packets received passed to the processor.
U32 cadSysProcEventNdPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.29	Unsigned32	read-write	The maximum permitted ND event packet rate to the Router Control processor.
C32 cadSysProcEventNdPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.84	Counter32	read-only	The number of ND event packets received that are dropped.
C32 cadSysProcEventNdPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.83	Counter32	read-only	The number of ND event packets received passed to the processor.
U32 cadSysProcEventNoRouteIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.27	Unsigned32	read-write	The maximum permitted No Route (IPv6) event packet rate to the Router Control processor.
C32 cadSysProcEventNoRouteIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.80	Counter32	read-only	The number of No Route (IPv6) event packets received that are dropped.
C32 cadSysProcEventNoRouteIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.79	Counter32	read-only	The number of No Route (IPv6) event packets received passed to the processor.
U32 cadSysProcEventNoRoutePacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.25	Unsigned32	read-write	The maximum permitted No Route event packet rate to the Router Control processor.
C32 cadSysProcEventNoRoutePacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.76	Counter32	read-only	The number of No Route event packets received that are dropped.
C32 cadSysProcEventNoRoutePacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.75	Counter32	read-only	The number of No Route event packets received passed to the processor.
U32 cadSysProcEventTtlIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.31	Unsigned32	read-write	The maximum permitted TTL (IPv6) event packet rate to the Router Control processor.
C32 cadSysProcEventTtlIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.88	Counter32	read-only	The number of TTL (IPv6) event packets received that are dropped.
C32 cadSysProcEventTtlIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.87	Counter32	read-only	The number of TTL (IPv6) event packets received passed to the processor.
U32 cadSysProcEventTtlPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.30	Unsigned32	read-write	The maximum permitted TTL event packet rate to the Router Control processor.
C32 cadSysProcEventTtlPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.86	Counter32	read-only	The number of TTL event packets received that are dropped.
C32 cadSysProcEventTtlPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.85	Counter32	read-only	The number of TTL event packets received passed to the processor.
U32 cadSysProcIcmpIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.15	Unsigned32	read-write	The maximum permitted ICMP (Ipv6 other than Neighbor Discover and MLD) packet throttle rate to the Router Control processor.
C32 cadSysProcIcmpIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.44	Counter32	read-only	The number of ICMP(IPv6) packets received that are dropped.
C32 cadSysProcIcmpIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.43	Counter32	read-only	The number of ICMP(Ipv6) packets received passed to the processor.
U32 cadSysProcIcmpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.4	Unsigned32	read-write	The maximum permitted ICMP(IPv4) packet rate to the Router Control processor.
C32 cadSysProcIcmpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.11	Counter32	read-only	The number of ICMP packets received that are dropped.
C32 cadSysProcIcmpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.10	Counter32	read-only	The number of ICMP packets received passed to the processor.
U32 cadSysProcIgmpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.7	Unsigned32	read-write	The maximum permitted IGMP packet rate to the Router Control processor.
C32 cadSysProcIgmpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.20	Counter32	read-only	The number of IGMP packets received that are dropped.
C32 cadSysProcIgmpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.19	Counter32	read-only	The number of IGMP packets received passed to the processor.
U32 cadSysProcIsisPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.12	Unsigned32	read-write	The IS-IS packet rate to the processor.
C32 cadSysProcIsisPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.32	Counter32	read-only	The number of IS-IS packets received that are dropped.
C32 cadSysProcIsisPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.31	Counter32	read-only	The number of IS-IS packets received passed to the processor.
U32 cadSysProcLacpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.36	Unsigned32	read-write	The total LACP packet rate to the processor.
C32 cadSysProcLacpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.94	Counter32	read-only	The number of LACP packets received that are dropped.
C32 cadSysProcLacpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.93	Counter32	read-only	The number of LACP packets received passed to the processor.
U32 cadSysProcLdpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.34	Unsigned32	read-write	The LDP (UDP and TCP) packet rate to the processor.
C32 cadSysProcLdpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.71	Counter32	read-only	The number of LDP (UDP and TCP) packets received that are dropped.
C32 cadSysProcLdpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.70	Counter32	read-only	The number of LDP (UDP and TCP) packets received passed to the processor.
U32 cadSysProcMldPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.16	Unsigned32	read-write	The maximum permitted MLD (version 1 and version 2) packet throttle rate to the Router Control processor.
C32 cadSysProcMldPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.47	Counter32	read-only	The number of MLD packets received that are dropped.
C32 cadSysProcMldPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.46	Counter32	read-only	The number of MLD packets received passed to the processor.
U32 cadSysProcNdPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.13	Unsigned32	read-write	The maximum permitted Neighbor Discover (ND) packet throttle rate to the Router Control processor. This includes IPv6 Router Solicitation, Router Advertise, Neighbor Solicitation, Neighbor Advertise, and Redirect messages.
C32 cadSysProcNdPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.38	Counter32	read-only	The number of Neighbor Discover packets received that are dropped.
C32 cadSysProcNdPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.37	Counter32	read-only	The number of Neighbor Discover packets received passed to the processor.
U32 cadSysProcOspfPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.5	Unsigned32	read-write	The maximum permitted OSPFv2 packet rate to the Router Control processor.
C32 cadSysProcOspfPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.14	Counter32	read-only	The number of OSPFv2 packets received that are dropped.
C32 cadSysProcOspfPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.13	Counter32	read-only	The number of OSPFv2 packets received passed to the processor.
U32 cadSysProcOspfv3PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.22	Unsigned32	read-write	The maximum permitted OSPFv3 packet rate to the Router Control processor.
C32 cadSysProcOspfv3PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.65	Counter32	read-only	The number of OSPFv3 packets received that are dropped.
C32 cadSysProcOspfv3PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.64	Counter32	read-only	The number of OSPFv3 packets received passed to the processor.
U32 cadSysProcPimPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.18	Unsigned32	read-write	The maximum permitted PIM packet throttle rate to the Router Control processor.
C32 cadSysProcPimPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.53	Counter32	read-only	The number of PIM packets received that are dropped.
C32 cadSysProcPimPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.52	Counter32	read-only	The number of PIM packets received passed to the processor.
cadSysProcPolicingConfig	1.3.6.1.4.1.4998.1.1.5.1.13
cadSysProcPolicingCounts	1.3.6.1.4.1.4998.1.1.5.1.14
U32 cadSysProcRipPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.6	Unsigned32	read-write	The maximum permitted RIP packet rate to the Router Control processor.
C32 cadSysProcRipPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.17	Counter32	read-only	The number of RIP packets received that are dropped.
C32 cadSysProcRipPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.16	Counter32	read-only	The number of RIP packets received passed to the processor.
U32 cadSysProcRouterControlGlobalPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.1	Unsigned32	read-write	The maximum permitted global protocol packet throttle rate to the Router Control processor.
C32 cadSysProcRouterControlGlobalPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.2	Counter32	read-only	The number of packets received that are dropped by the Router Control processor.
C32 cadSysProcRouterControlGlobalPacketsReceivedPassedEx	1.3.6.1.4.1.4998.1.1.5.1.14.1	Counter32	read-only	The number of packets received passed to the Router Control processor.
U32 cadSysProcRouterControlOtherPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.8	Unsigned32	read-write	The other protocol packet rate to the Router Control processor.
C32 cadSysProcRouterControlOtherPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.23	Counter32	read-only	The number of other packets received that are dropped by the Router Control processor.
C32 cadSysProcRouterControlOtherPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.22	Counter32	read-only	The number of other packets received passed to the Router Control processor.
U32 cadSysProcSnmpCmPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.19	Unsigned32	read-write	The maximum permitted SNMP (from CMs) packet throttle rate to the Router Control processor.
C32 cadSysProcSnmpCmPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.56	Counter32	read-only	The number of SNMP (from CMs) packets received that are dropped.
C32 cadSysProcSnmpCmPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.55	Counter32	read-only	The number of SNMP (from CMs) packets received passed to the processor.
U32 cadSysProcSnmpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.10	Unsigned32	read-write	The SNMP packet rate to the System Control processor.
C32 cadSysProcSnmpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.26	Counter32	read-only	The number of SNMP packets received that are dropped.
C32 cadSysProcSnmpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.25	Counter32	read-only	The number of SNMP packets received passed to the System Control processor.
U32 cadSysProcTelnetPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.21	Unsigned32	read-write	The maximum permitted Telnet packet throttle rate to the Router Control processor.
C32 cadSysProcTelnetPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.62	Counter32	read-only	The number of TELNET packets received that are dropped.
C32 cadSysProcTelnetPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.61	Counter32	read-only	The number of TELNET packets received passed to the System Control processor.
U32 cadSysProcTftpIpv6PacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.23	Unsigned32	read-write	The TFTP (IPv6) packet rate to the processor.
C32 cadSysProcTftpIpv6PacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.68	Counter32	read-only	The number of TFTP (IPv6) packets received that are dropped.
C32 cadSysProcTftpIpv6PacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.67	Counter32	read-only	The number of TFTP (IPv6) packets received passed to the processor.
U32 cadSysProcTftpPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.11	Unsigned32	read-write	The TFTP packet rate to the processor.
C32 cadSysProcTftpPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.29	Counter32	read-only	The number of TFTP packets received that are dropped.
C32 cadSysProcTftpPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.28	Counter32	read-only	The number of TFTP packets received passed to the processor.
U32 cadSysProcVpmePacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.38	Unsigned32	read-write	The maximum permitted VPME packet rate to the processor.
C32 cadSysProcVpmePacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.98	Counter32	read-only	The number of VPME packets received that are dropped.
C32 cadSysProcVpmePacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.97	Counter32	read-only	The number of VPME packets received passed to the processor.
U32 cadSysProcVrepPacketRate	1.3.6.1.4.1.4998.1.1.5.1.13.37	Unsigned32	read-write	The maximum permitted D6/VREP packet rate to the processor.
C32 cadSysProcVrepPacketsReceivedDropped	1.3.6.1.4.1.4998.1.1.5.1.14.96	Counter32	read-only	The number of D6/VREP packets received that are dropped.
C32 cadSysProcVrepPacketsReceivedPassed	1.3.6.1.4.1.4998.1.1.5.1.14.95	Counter32	read-only	The number of D6/VREP packets received passed to the processor.
I32 cadSysRangingInterval	1.3.6.1.4.1.4998.1.1.5.1.1.4	Integer32	read-only	Time between transmission of broadcast Ranging requests. (ref 7.3.3)
I32 cadSysRegistrationRequestRetries	1.3.6.1.4.1.4998.1.1.5.1.1.6	Integer32	read-only	Number of retries on registration requests/responses.
cadSysReload	1.3.6.1.4.1.4998.1.1.5.1.6
cadSysReloadGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.6			System reload control objects
STR cadSysReloadImageName	1.3.6.1.4.1.4998.1.1.5.1.6.2	DisplayString	read-write	Image name to use in reloadImage operation
INT cadSysReloadOperation	1.3.6.1.4.1.4998.1.1.5.1.6.1	INTEGER	read-write	Control object for E6000 reload, reading this object always returns none(99)
STR cadSysReloadPatchName	1.3.6.1.4.1.4998.1.1.5.1.6.5	DisplayString	read-write	Patch image name to use in patch operations
BIT cadSysReloadStatus	1.3.6.1.4.1.4998.1.1.5.1.6.3	Bits	read-only	Status object for E6000 reload
STR cadSysReloadStatusDescription	1.3.6.1.4.1.4998.1.1.5.1.6.4	DisplayString	read-write	Textual description of reload status
T/F cadSysRemoteFSEnable	1.3.6.1.4.1.4998.1.1.5.1.1.36	TruthValue	read-write	Indicates whether the active SCM should allow mounting the the filesystems of the standby SCM.
T/F cadSysRemotePortEnable	1.3.6.1.4.1.4998.1.1.5.1.1.37	TruthValue	read-write	Indicates whether the active SCM should allow redirection of the serial console of the standby SCM.
T/F cadSysSendTccRefIdPerFragment	1.3.6.1.4.1.4998.1.1.5.1.1.53	TruthValue	read-write	Settings for sending the Transmit Channel Configuration (TCC) Reference sub-type 46.1 for type 46 TCC fragmentation. If 'true', sends 46.1 Ref ID in every type 46 TCC fragment; If 'false', only sends 46.1 Ref ID in the first TCC fragment (DOCSIS Compliant).
cadSysServer	1.3.6.1.4.1.4998.1.1.5.1.16
ADM cadSysServerAdminState	1.3.6.1.4.1.4998.1.1.5.1.16.1.1.2	AdminState	read-create	The administrative state of the server.
cadSysServerEntry	1.3.6.1.4.1.4998.1.1.5.1.16.1.1		not-accessible	Describes an INET service and whether it is enabled
cadSysServerTable	1.3.6.1.4.1.4998.1.1.5.1.16.1		not-accessible	Table describing the (INET) services that should run on the SCM.
SER cadSysServerType	1.3.6.1.4.1.4998.1.1.5.1.16.1.1.1	ServerType	not-accessible	The service type
cadSysSharedSecret	1.3.6.1.4.1.4998.1.1.5.1.25
cadSysSnmp	1.3.6.1.4.1.4998.1.1.5.1.4
cadSysSnmpGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.4			System snmp control object
U32 cadSysSnmpReadAheadMax	1.3.6.1.4.1.4998.1.1.5.1.4.2	Unsigned32	read-write	This value is the maximum number of records to read ahead
U32 cadSysSnmpRefreshTime	1.3.6.1.4.1.4998.1.1.5.1.4.3	Unsigned32	read-write	This value represents how old a database record can be to be used.
cadSysSourceAddress	1.3.6.1.4.1.4998.1.1.5.1.22
cadSysSourceAddressEntry	1.3.6.1.4.1.4998.1.1.5.1.22.1.1		not-accessible	This entry contains the configured source IPv4 and/or IPv6 address for each administrative service. If configured, it also contains the global default address.
cadSysSourceAddressGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.10			Source Interface objects.
ADM cadSysSourceAddressIndex	1.3.6.1.4.1.4998.1.1.5.1.22.1.1.1	AdminSrcAddrType	not-accessible	The type of administrative service.
ADR cadSysSourceAddressIpv4Address	1.3.6.1.4.1.4998.1.1.5.1.22.1.1.3	InetAddressIPv4	read-only	The IPv4 address of the IPv4 interface at the time the row ipv4 ifIndex was populated. Used as the source address for the service if the state is in-service. For a server service, it is also the only DIP allowed for incoming requests. A value of null indicates no source address has been assigned.
ADR cadSysSourceAddressIpv6Address	1.3.6.1.4.1.4998.1.1.5.1.22.1.1.5	InetAddressIPv6	read-only	The IPv6 address of the IPv6 interface at the time the ipv6 ifIndex was populated. Used as the source address for the service if the state is in-service. For a server service, it is also the only DIP allowed for incoming requests. A value of null indicates no source address has been assigned.
cadSysSourceAddressTable	1.3.6.1.4.1.4998.1.1.5.1.22.1		not-accessible	Table of source interface addresses for administrative services
NUM cadSysSourceInterfaceIpv4IfIndex	1.3.6.1.4.1.4998.1.1.5.1.22.1.1.2	InterfaceIndexOrZero	read-write	The ifIndex of the interface from which all IPv4 packets are sourced. For a server service, it is also the only DIP allowed for incoming requests. A value of 0 indicates no source interface override.
NUM cadSysSourceInterfaceIpv6IfIndex	1.3.6.1.4.1.4998.1.1.5.1.22.1.1.4	InterfaceIndexOrZero	read-write	The ifIndex of the interface from which all IPv6 packets are sourced (not currently supported). For a server service, it is also the only DIP allowed for incoming requests. A value of 0 indicates no source interface override.
BIT cadSysSpOperMode	1.3.6.1.4.1.4998.1.1.5.1.1.26	Bits	read-write	Special operational mode. Value of 1 indicates the mode is enabled. dqossf10cms - Allow 1.0 CMs to be stored in DocsQosServiceFlowEntry adjrxpwrctl - Allow rx power control to be adjusted by mod type usage enbudptcpfltr - Allow combining of Udp and Tcp messages in a single filter upce - Allow Upstream Packet Classifier Enforcement use16ForDSPeakTrafficRate - use the defunct TLV type 16 for DS peak traffic rate cpeNacksForceCmReset - - Force CM reset upon receiving 3 consecutive CPE NACKs loadBalUnbondedVoipOn - Allow load balancing for non-bonded voice calls limitUsRngRspFreqOff - Prevent CM from using an upstream frequency beyond 42 MHz upDownTrapIfDescrOff - Allow linkup or linkdown trap to include ifDescr ofdmSparingCleanupOff - Allow automatically reset any D3.1 CMs in a cable-mac that has an OFDM channel on that DCAM in the CM's RCS after a failover or fallback cmstatusoperational - Support DOCS-IF-MIB draft-05 (cw26)'s change to docsIfCmtsCmStatusValue, such that online modems take on a value of operational(8) at the CMTS. If disabled, operational(8) is not used and online modems take on a value of registrationComplete(6) at the CMTS. docsis20test - Allow running of DOCSIS 2.0 Tests. showCmFormatCVOff - show cable modem is formatted per CableVision's requirements if set to 0. docsis10plusOff - DOCSIS 1.0+ support is enabled if set to 0. downstreamOverrideOn - downstream overrides are disabled if this is set to 0. supressDCDOff - DCDs are suppressed if set to 0. virtualCmOff - support for virtual modems is enabled if set to 0. bpiHybridOff - Allow DOCSIS 1.1 modems to operate in BPI instead of BPI+ if this is set to 0. oneDCmDSMaxTrafBurstOn - Override Max Traffic Burst for DOCSIS 1.1 modems on a 1D CAM with E6000 setting if this is set to 0. docsis30ReqTxPolicyChkOff - Override DOCSIS 3.0 checking for Request/Transmission Policy TLV on upstream flows.
I32 cadSysSyncInterval	1.3.6.1.4.1.4998.1.1.5.1.1.1	Integer32	read-only	Nominal time between transmission of SYNC messages. (ref 6.3.2)
cadSysSystem	1.3.6.1.4.1.4998.1.1.5.1.2
cadSysSystemGroup	1.3.6.1.4.1.4998.1.1.5.1.12.2.2			System description objects
I32 cadSysT10Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.18	Integer32	read-only	Wait for Transaction End timeout.
I32 cadSysT11Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.19	Integer32	read-only	Wait for a DCC Response on the old channel.
I32 cadSysT13Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.20	Integer32	read-only	Maximum holding time for QOS resources for DCC.
I32 cadSysT5Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.10	Integer32	read-only	Wait for Upstream CHannel Change response.
I32 cadSysT6Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.11	Integer32	read-only	Wait for REG-RSP and REG-ACK
I32 cadSysT7Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.15	Integer32	read-only	Wait for DSA/DSC/DSD Response timeout.
I32 cadSysT8Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.16	Integer32	read-only	Wait for DSA/DSC/DSD Acknowledge timeout.
I32 cadSysT9Timeout	1.3.6.1.4.1.4998.1.1.5.1.1.17	Integer32	read-only	Registration timeout, the time allowed between the CMTS sending a RNG-RSP(success) to a CM, and receiving a REG-REQ from that same CM.
U32 cadSysTcpSmoothingValue1D8U	1.3.6.1.4.1.4998.1.1.5.1.1.38	Unsigned32	read-write	TCP smoothing value to be programmed into hardware on 1D8U CAMs.
U32 cadSysTcpSmoothingValue2D12U	1.3.6.1.4.1.4998.1.1.5.1.1.39	Unsigned32	read-write	TCP smoothing value to be programmed into hardware on 2D12U CAMs.
cadSystemCompliance	1.3.6.1.4.1.4998.1.1.5.1.12.1.1			Compliance statement for entities implementing the Cadant System Mib.
cadSystemCompliances	1.3.6.1.4.1.4998.1.1.5.1.12.1
cadSystemGroups	1.3.6.1.4.1.4998.1.1.5.1.12.2
cadSystemMib	1.3.6.1.4.1.4998.1.1.5.1			Arris E6000 system parameters and constants
cadSystemMibConformance	1.3.6.1.4.1.4998.1.1.5.1.12
INT cadSysTftpProxy	1.3.6.1.4.1.4998.1.1.5.1.1.58	INTEGER	read-write	This parameter provides a global enable for the TFTP Enforce and Dynamic Shared Secret features. In order for the cadIfMacDomainTftpEnforce and cadIfMacDomainDynamicSecret parameters to take effect, this parameter must also be enabled. This parameter can also limit those features to only IPv4 transfers or IPv6 transfers.
I32 cadSysUCDInterval	1.3.6.1.4.1.4998.1.1.5.1.1.2	Integer32	read-only	Time between transmission of UCD messages. (ref 6.3.3)
T/F cadSysUnicastNpUsAcquisition	1.3.6.1.4.1.4998.1.1.5.1.1.56	TruthValue	read-write	This object enables unicast non-primary upstream channel acquisition.
T/F cadSysWriteMem	1.3.6.1.4.1.4998.1.1.5.1.3.1	TruthValue	read-write	This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in volatile memory (RAM) is written to persistent memory (NVRAM).

RFC description

ARRIS (formerly Cadant) vendor-private MIB for CMTS system parameters, constants, and overall E6000 platform management.

Start monitoring ARRIS E6000 CMTS with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CADANT-CMTS-SYSTEM-MIB