ACC-SLOT

All MIBs › ACC-SLOT

Category: Vendor: ACC/Ericsson

Description:

Manages physical slot configuration and status on ACC/Ericsson chassis-based routers, including module presence and operational state.

Imported Objects

From ACC-MIB

DisplayString
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accMemBlkEntInUse	OBJECT-TYPE
accMemBlkEntTotal	OBJECT-TYPE
accMemEMEStatus	OBJECT-TYPE
accMemOptimiserFeature	OBJECT-TYPE
accMemOptimiserMemory	OBJECT-TYPE
accMemOptimiserPref	OBJECT-TYPE
accMemOptimiserStatus	OBJECT-TYPE
accTrapLogSeqNum	OBJECT-TYPE
accTrapLogSeverityType	OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

From RFC1213-MIB

tcpConnRemAddress

What Is ACC-SLOT?

ACC-SLOT is a legacy Access Communications Corp (ACC, built on ACC-MIB/ACC-SYSTEM) proprietary MIB reporting per-slot physical port configuration and traffic statistics on ACC WAN access equipment. Its slot table, keyed by index, records in/out packet counts, change-count, protocol, clock mode, queue mode, dial procedure, resync mode, compression mode (V.42bis/DCS-221 parameters), severe-congestion percentage, dial address, compression revision/max-streams/message level, interface type, E1 frame mode, and a Y2K-safe last-change timestamp, with a companion card-slot table. As a configuration/performance MIB it lets an administrator confirm per-slot dial/compression configuration and traffic volume on legacy ACC WAN access equipment. It is deployed on legacy ACC (Access Communications Corp) WAN access equipment. Engineers can download the ACC-SLOT file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-SLOT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

per-slot dial/compression configuration and traffic volume

Supported Devices

Legacy ACC (Access Communications Corp) WAN access equipment

Monitoring Examples

An administrator checks accSlotInPkts and accSlotCompressMode to confirm traffic volume and compression settings on a legacy ACC WAN access slot.

OIDs

OID symbolic	OID numeric	Type	Access	Description
accCardCircuitEntry	1.3.6.1.4.1.5.1.1.5.5.1		not-accessible	Contains a summary of objects for a circuit entry.
INT accCardCircuitIndex	1.3.6.1.4.1.5.1.1.5.5.1.4	INTEGER	read-only	The ifIndex for this circuit.
INT accCardCircuitInterfaceNum	1.3.6.1.4.1.5.1.1.5.5.1.3	INTEGER	read-only	The interface number that this circuit resides on - corresponds to accCardInterfaceNum.
INT accCardCircuitNum	1.3.6.1.4.1.5.1.1.5.5.1.1	INTEGER	read-only	An integer that uniquely identifies the circuit within the interface.
INT accCardCircuitSlotNum	1.3.6.1.4.1.5.1.1.5.5.1.2	INTEGER	read-only	The slot number that this circuit resides on - corresponds to accCardSlotNum.
accCardCircuitTable	1.3.6.1.4.1.5.1.1.5.5		not-accessible	A table providing information for each circuit installed in the system chassis, indicating how they relate to slots and interfaces.
accCardInterfaceEntry	1.3.6.1.4.1.5.1.1.5.4.1		not-accessible	Contains a summary of objects for an interface entry.
INT accCardInterfaceIndex	1.3.6.1.4.1.5.1.1.5.4.1.4	INTEGER	read-only	The ifIndex for this interface.
INT accCardInterfaceNum	1.3.6.1.4.1.5.1.1.5.4.1.1	INTEGER	read-only	An integer that uniquely identifies the interface within the slot card.
INT accCardInterfaceSlotNum	1.3.6.1.4.1.5.1.1.5.4.1.3	INTEGER	read-only	The slot number that this interface resides on - corresponds to accCardSlotNum.
accCardInterfaceTable	1.3.6.1.4.1.5.1.1.5.4		not-accessible	A table providing interface information for each interface on the system indicating how they relate to system slots.
INT accCardInterfaceType	1.3.6.1.4.1.5.1.1.5.4.1.2	INTEGER	read-only	The interface type - need to define enumerations here !!
INT accCardSlotAdminState	1.3.6.1.4.1.5.1.1.5.3.1.6	INTEGER	read-write	An integer value which uniquely identifies the card administration state.
accCardSlotEntry	1.3.6.1.4.1.5.1.1.5.3.1		not-accessible	Contains a summary of objects for a slot entry.
INT accCardSlotIndex	1.3.6.1.4.1.5.1.1.5.3.1.8	INTEGER	read-only	The ifIndex for this slot.
INT accCardSlotNum	1.3.6.1.4.1.5.1.1.5.3.1.1	INTEGER	read-only	An integer that uniquely identifies the card slot within the system chassis.
INT accCardSlotNum11Slot	1.3.6.1.4.1.5.1.1.5.3.1.9	INTEGER	read-only	An integer that uniquely identifies the card slot within the 11-Slot system chassis. This can be used as an alternate index into accCardSlotTable.
INT accCardSlotOperState	1.3.6.1.4.1.5.1.1.5.3.1.7	INTEGER	read-write	An integer value which uniquely identifies the card operational state.
STR accCardSlotPortCnf	1.3.6.1.4.1.5.1.1.5.3.1.5	DisplayString	read-only	A printable ASCII string representing the interface configuration on this slot.
STR accCardSlotRevNum	1.3.6.1.4.1.5.1.1.5.3.1.3	DisplayString	read-only	A printable ASCII string representing the card rev number.
STR accCardSlotSerNum	1.3.6.1.4.1.5.1.1.5.3.1.4	DisplayString	read-only	A printable ASCII string representing the card serial num.
accCardSlotTable	1.3.6.1.4.1.5.1.1.5.3		not-accessible	A table providing objects for each installed card in the system chassis slots.
STR accCardSlotTrapMsg	1.3.6.1.4.1.5.1.1.5.6.1	DisplayString	read-only	Enterprise Trap Message for CardSlot
accCardSlotTraps	1.3.6.1.4.1.5.1.1.5.6
INT accCardSlotType	1.3.6.1.4.1.5.1.1.5.3.1.2	INTEGER	read-only	An integer value which uniquely identifies the card type.
NTF accRmAcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.28			If the DC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.4			When the command to activate a card is issued. This trap indicates the activation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmActvFailTrap	1.3.6.1.4.1.5.1.1.5.6.0.6			When the command (set slot state) to activate card is issued. This trap is generated in case of a failure or Mismatch of the slot. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.5			When the command to activate card is issued. This trap indicates the activation has started SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmBfrAllocTrap	1.3.6.1.4.1.5.1.1.5.6.0.18			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmBrowLdngSetupWizTrap	1.3.6.1.4.1.5.1.1.5.6.0.45			Browser loading Java Setup Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmCardDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.40			When the diagnostics on the particular CARD slot fails this trap is generated. Indicating that there is some problem with that CARD. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmCardRemovedTrap	1.3.6.1.4.1.5.1.1.5.6.0.3			This indicates that a Card has been removed and tried to acticvate or deactivate the respective card SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmCardRemvdTrap	1.3.6.1.4.1.5.1.1.5.6.0.9			This indicates that a Card has been removed after deactivating the slot using the set slot state command SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmChasFanIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.36			Trap indicating the status of the chasis fan whether it failed or recovered. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmChasFanPresTrap	1.3.6.1.4.1.5.1.1.5.6.0.35			Trap indicating the status of the chasis fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmConfWizLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.46			Configuration Wizard is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmDataCallAccptTrap	1.3.6.1.4.1.5.1.1.5.6.0.15			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataCallTrap	1.3.6.1.4.1.5.1.1.5.6.0.13			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataEnableTrap	1.3.6.1.4.1.5.1.1.5.6.0.14			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the initiate data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataSwitchTrap	1.3.6.1.4.1.5.1.1.5.6.0.16			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.27			If the AC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmDeActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.8			When the command (set slot state) to deactivate a card is issued. This trap indicates the deactivation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmDeActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.7			When the command (set slot state) to deactivate card is issued. This trap indicates the deactivation has started. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmEalm1Trap	1.3.6.1.4.1.5.1.1.5.6.0.34			Trap indicating the external 1st alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmEalm2Trap	1.3.6.1.4.1.5.1.1.5.6.0.33			Trap indicating the external 2nd alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmFanStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.26			If the fan in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmFaultHndlTrap	1.3.6.1.4.1.5.1.1.5.6.0.11			Fault Hndl, Invalid State SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFaultIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.12			Fault Indication (reason), Slot SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFeatureTrap	1.3.6.1.4.1.5.1.1.5.6.0.2			This trap is generated when a particular command which is a part of feature that is set to OFF using the EME feature. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmFrmWareLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.17			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmFrmwrCompatiblTrap	1.3.6.1.4.1.5.1.1.5.6.0.20			If the extension is not supported by the version of the apl file then this trap is sent. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 48
NTF accRmIdbTrap	1.3.6.1.4.1.5.1.1.5.6.0.42			SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmInstAccAppLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.48			Instant Access applet is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInSuffRAMTrap	1.3.6.1.4.1.5.1.1.5.6.0.23			This is a memory related trap indicating that sufficient RAM is not on the borad, so that the admin can take the appropriate action of increasing the memory or replacing the memory. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmInterFileJavaManTrap	1.3.6.1.4.1.5.1.1.5.6.0.44			Intermediate file sent to Java Manager %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInvStateTrap	1.3.6.1.4.1.5.1.1.5.6.0.10			If the card is BUSY and cannot be deactivated this trap is generated SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmLanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.38			When the diagnostics on the particular LAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmLdngElemManTrap	1.3.6.1.4.1.5.1.1.5.6.0.43			Browser loading Element Manager at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.19			If the file is corrupted the loading is aborted and is indicated by this trap. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 253
NTF accRmLoadTrap5	1.3.6.1.4.1.5.1.1.5.6.0.21			This is basically a revision mismatch. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmLowMemTrap	1.3.6.1.4.1.5.1.1.5.6.0.37			This indicates very clearly that the Memory is very low and the admin has to do some dagnostics and take a quick action on the various memory critical issues for instance like trap log size etc., SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmPriConfScrTrap	1.3.6.1.4.1.5.1.1.5.6.0.47			Primary config script sent to Configuration Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmPwr1PresTrap	1.3.6.1.4.1.5.1.1.5.6.0.29			If the power supply is removed or installed this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrAc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.32			If the Tigris power supply AC Component fails or recovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrDc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.31			If the Tigris power supply DC Component fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrFan1Trap	1.3.6.1.4.1.5.1.1.5.6.0.30			If the Tigris power supply fan fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmPwrSplyMalfnTrap	1.3.6.1.4.1.5.1.1.5.6.0.24			This is a TIGRIS Power supply trap indicating that the one of the Power Supply is not OK and should be replaced. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrSplyStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.25			When one of the DUAL TIGRIS Power supply is removed or inserted this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmReqResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.1			This trap is generated when a particular command which is a part of feature that is set to ON from OFF using the EME feature indicating that a reload can actually bring that feature effective. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.41			This trap is to prompt the admin to reset the router as he would have changed some settings and they will be effective only after a reset for example change/deletion in static routing entry on a particular interface. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmSwUpGradeMsgTrap	1.3.6.1.4.1.5.1.1.5.6.0.22			THIS ROUTER WILL NOT OPERATE WITH FULL FUNCTIONALITY UNTIL A VALID KEY HAS BEEN ENTERED SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmWanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.39			When the diagnostics on the particular WAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
accSlot	1.3.6.1.4.1.5.1.1.5
INT accSlotClockMode	1.3.6.1.4.1.5.1.1.5.2.1.23	INTEGER	read-write	Clock mode of this port
INT accSlotCompressDcs221P1	1.3.6.1.4.1.5.1.1.5.2.1.31	INTEGER	read-write	Compression Mode
INT accSlotCompressMaxStreams	1.3.6.1.4.1.5.1.1.5.2.1.35	INTEGER	read-write	The maximum number of independent data streams for this physical port. This object determines the size of the history buffer pool.
INT accSlotCompressMessageLevel	1.3.6.1.4.1.5.1.1.5.2.1.36	INTEGER	read-write	.
INT accSlotCompressMode	1.3.6.1.4.1.5.1.1.5.2.1.27	INTEGER	read-write	Establishes operational mode of Data Compression. This functionality is appropriate for serial lines.
INT accSlotCompressRevision	1.3.6.1.4.1.5.1.1.5.2.1.34	INTEGER	read-write	Indicates which data compression algorithm should be used for this physical port. If the confi gured protocol is Frame Relay, X.25 or PPP, the com pression mode must be new. If the configured protocol is LAPB, OLD indicates that the neighbor is running a release which predates 7.2 and the old compression algorithm should be used.
INT accSlotCompressV42bisP1	1.3.6.1.4.1.5.1.1.5.2.1.29	INTEGER	read-only	Number of codewords
INT accSlotCompressV42bisP2	1.3.6.1.4.1.5.1.1.5.2.1.30	INTEGER	read-only	Maximum string size
STR accSlotDialAddress	1.3.6.1.4.1.5.1.1.5.2.1.33	DisplayString	read-write	Dial Address.
INT accSlotDialProcedure	1.3.6.1.4.1.5.1.1.5.2.1.25	INTEGER	read-write	Dial Procedure.
INT accSlotE1FrameMode	1.3.6.1.4.1.5.1.1.5.2.1.38	INTEGER	read-write	.
accSlotEntry	1.3.6.1.4.1.5.1.1.5.2.1		not-accessible	A table entry providing information about a specific physical port.
INT accSlotIfType	1.3.6.1.4.1.5.1.1.5.2.1.37	INTEGER	read-write	.
CTR accSlotInPkts	1.3.6.1.4.1.5.1.1.5.2.1.11	Counter	read-only	Number of packets received on this physical interface.
OCT accSlotLastChangeY2K	1.3.6.1.4.1.5.1.1.5.2.1.39	OCTET STRING	read-only	Time when a state change was last detected on this physical port. The seven byte long octet string represents year 2000 compliant date and time, and is laid out in the following structured format: 2 Byte unsigned short value of year 1 Byte value of month 1 Byte value of day of the month 1 Byte value of hour 1 Byte value of minutes 1 Byte value of seconds
CTR accSlotNumChanges	1.3.6.1.4.1.5.1.1.5.2.1.21	Counter	read-only	Number of times that this interface has changed state (either up-to-down or down-to-up).
CTR accSlotOutPkts	1.3.6.1.4.1.5.1.1.5.2.1.17	Counter	read-only	Number of packets transmitted on this physical interface.
INT accSlotProtocol	1.3.6.1.4.1.5.1.1.5.2.1.22	INTEGER	read-write	Protocol used on this slot. note that these enumerated values match those in accBrPortProtocol.
INT accSlotQueueMode	1.3.6.1.4.1.5.1.1.5.2.1.24	INTEGER	read-write	Queuing mode for this slot Fair queuing provides per-conversation bandwidth allocation, with additional bandwidth allocated to higher priority traffic. Precedence queueing gives first-in-first-out service amongst priority queues.
INT accSlotResyncMode	1.3.6.1.4.1.5.1.1.5.2.1.26	INTEGER	read-write	Establishes operational mode of the Resync function for crypto gear. When active, a link-down condition intitiates resynchronization, which is manifested by setting the DTR (RTS) signal active (low) for 10 milliseconds.
INT accSlotSevereCongPct	1.3.6.1.4.1.5.1.1.5.2.1.32	INTEGER	read-write	Percent Congested
accSlotTable	1.3.6.1.4.1.5.1.1.5.2		not-accessible	A list of physical port entries. The number of entries is given by the value of accSlotNum.

OID symbolic	OID numeric	Type	Access	Description
accSlot	1.3.6.1.4.1.5.1.1.5
accSlotTable	1.3.6.1.4.1.5.1.1.5.2		not-accessible	A list of physical port entries. The number of entries is given by the value of accSlotNum.
accSlotEntry	1.3.6.1.4.1.5.1.1.5.2.1		not-accessible	A table entry providing information about a specific physical port.
CTR accSlotInPkts	1.3.6.1.4.1.5.1.1.5.2.1.11	Counter	read-only	Number of packets received on this physical interface.
CTR accSlotOutPkts	1.3.6.1.4.1.5.1.1.5.2.1.17	Counter	read-only	Number of packets transmitted on this physical interface.
CTR accSlotNumChanges	1.3.6.1.4.1.5.1.1.5.2.1.21	Counter	read-only	Number of times that this interface has changed state (either up-to-down or down-to-up).
INT accSlotProtocol	1.3.6.1.4.1.5.1.1.5.2.1.22	INTEGER	read-write	Protocol used on this slot. note that these enumerated values match those in accBrPortProtocol.
INT accSlotClockMode	1.3.6.1.4.1.5.1.1.5.2.1.23	INTEGER	read-write	Clock mode of this port
INT accSlotQueueMode	1.3.6.1.4.1.5.1.1.5.2.1.24	INTEGER	read-write	Queuing mode for this slot Fair queuing provides per-conversation bandwidth allocation, with additional bandwidth allocated to higher priority traffic. Precedence queueing gives first-in-first-out service amongst priority queues.
INT accSlotDialProcedure	1.3.6.1.4.1.5.1.1.5.2.1.25	INTEGER	read-write	Dial Procedure.
INT accSlotResyncMode	1.3.6.1.4.1.5.1.1.5.2.1.26	INTEGER	read-write	Establishes operational mode of the Resync function for crypto gear. When active, a link-down condition intitiates resynchronization, which is manifested by setting the DTR (RTS) signal active (low) for 10 milliseconds.
INT accSlotCompressMode	1.3.6.1.4.1.5.1.1.5.2.1.27	INTEGER	read-write	Establishes operational mode of Data Compression. This functionality is appropriate for serial lines.
INT accSlotCompressV42bisP1	1.3.6.1.4.1.5.1.1.5.2.1.29	INTEGER	read-only	Number of codewords
INT accSlotCompressV42bisP2	1.3.6.1.4.1.5.1.1.5.2.1.30	INTEGER	read-only	Maximum string size
INT accSlotCompressDcs221P1	1.3.6.1.4.1.5.1.1.5.2.1.31	INTEGER	read-write	Compression Mode
INT accSlotSevereCongPct	1.3.6.1.4.1.5.1.1.5.2.1.32	INTEGER	read-write	Percent Congested
STR accSlotDialAddress	1.3.6.1.4.1.5.1.1.5.2.1.33	DisplayString	read-write	Dial Address.
INT accSlotCompressRevision	1.3.6.1.4.1.5.1.1.5.2.1.34	INTEGER	read-write	Indicates which data compression algorithm should be used for this physical port. If the confi gured protocol is Frame Relay, X.25 or PPP, the com pression mode must be new. If the configured protocol is LAPB, OLD indicates that the neighbor is running a release which predates 7.2 and the old compression algorithm should be used.
INT accSlotCompressMaxStreams	1.3.6.1.4.1.5.1.1.5.2.1.35	INTEGER	read-write	The maximum number of independent data streams for this physical port. This object determines the size of the history buffer pool.
INT accSlotCompressMessageLevel	1.3.6.1.4.1.5.1.1.5.2.1.36	INTEGER	read-write	.
INT accSlotIfType	1.3.6.1.4.1.5.1.1.5.2.1.37	INTEGER	read-write	.
INT accSlotE1FrameMode	1.3.6.1.4.1.5.1.1.5.2.1.38	INTEGER	read-write	.
OCT accSlotLastChangeY2K	1.3.6.1.4.1.5.1.1.5.2.1.39	OCTET STRING	read-only	Time when a state change was last detected on this physical port. The seven byte long octet string represents year 2000 compliant date and time, and is laid out in the following structured format: 2 Byte unsigned short value of year 1 Byte value of month 1 Byte value of day of the month 1 Byte value of hour 1 Byte value of minutes 1 Byte value of seconds
accCardSlotTable	1.3.6.1.4.1.5.1.1.5.3		not-accessible	A table providing objects for each installed card in the system chassis slots.
accCardSlotEntry	1.3.6.1.4.1.5.1.1.5.3.1		not-accessible	Contains a summary of objects for a slot entry.
INT accCardSlotNum	1.3.6.1.4.1.5.1.1.5.3.1.1	INTEGER	read-only	An integer that uniquely identifies the card slot within the system chassis.
INT accCardSlotType	1.3.6.1.4.1.5.1.1.5.3.1.2	INTEGER	read-only	An integer value which uniquely identifies the card type.
STR accCardSlotRevNum	1.3.6.1.4.1.5.1.1.5.3.1.3	DisplayString	read-only	A printable ASCII string representing the card rev number.
STR accCardSlotSerNum	1.3.6.1.4.1.5.1.1.5.3.1.4	DisplayString	read-only	A printable ASCII string representing the card serial num.
STR accCardSlotPortCnf	1.3.6.1.4.1.5.1.1.5.3.1.5	DisplayString	read-only	A printable ASCII string representing the interface configuration on this slot.
INT accCardSlotAdminState	1.3.6.1.4.1.5.1.1.5.3.1.6	INTEGER	read-write	An integer value which uniquely identifies the card administration state.
INT accCardSlotOperState	1.3.6.1.4.1.5.1.1.5.3.1.7	INTEGER	read-write	An integer value which uniquely identifies the card operational state.
INT accCardSlotIndex	1.3.6.1.4.1.5.1.1.5.3.1.8	INTEGER	read-only	The ifIndex for this slot.
INT accCardSlotNum11Slot	1.3.6.1.4.1.5.1.1.5.3.1.9	INTEGER	read-only	An integer that uniquely identifies the card slot within the 11-Slot system chassis. This can be used as an alternate index into accCardSlotTable.
accCardInterfaceTable	1.3.6.1.4.1.5.1.1.5.4		not-accessible	A table providing interface information for each interface on the system indicating how they relate to system slots.
accCardInterfaceEntry	1.3.6.1.4.1.5.1.1.5.4.1		not-accessible	Contains a summary of objects for an interface entry.
INT accCardInterfaceNum	1.3.6.1.4.1.5.1.1.5.4.1.1	INTEGER	read-only	An integer that uniquely identifies the interface within the slot card.
INT accCardInterfaceType	1.3.6.1.4.1.5.1.1.5.4.1.2	INTEGER	read-only	The interface type - need to define enumerations here !!
INT accCardInterfaceSlotNum	1.3.6.1.4.1.5.1.1.5.4.1.3	INTEGER	read-only	The slot number that this interface resides on - corresponds to accCardSlotNum.
INT accCardInterfaceIndex	1.3.6.1.4.1.5.1.1.5.4.1.4	INTEGER	read-only	The ifIndex for this interface.
accCardCircuitTable	1.3.6.1.4.1.5.1.1.5.5		not-accessible	A table providing information for each circuit installed in the system chassis, indicating how they relate to slots and interfaces.
accCardCircuitEntry	1.3.6.1.4.1.5.1.1.5.5.1		not-accessible	Contains a summary of objects for a circuit entry.
INT accCardCircuitNum	1.3.6.1.4.1.5.1.1.5.5.1.1	INTEGER	read-only	An integer that uniquely identifies the circuit within the interface.
INT accCardCircuitSlotNum	1.3.6.1.4.1.5.1.1.5.5.1.2	INTEGER	read-only	The slot number that this circuit resides on - corresponds to accCardSlotNum.
INT accCardCircuitInterfaceNum	1.3.6.1.4.1.5.1.1.5.5.1.3	INTEGER	read-only	The interface number that this circuit resides on - corresponds to accCardInterfaceNum.
INT accCardCircuitIndex	1.3.6.1.4.1.5.1.1.5.5.1.4	INTEGER	read-only	The ifIndex for this circuit.
accCardSlotTraps	1.3.6.1.4.1.5.1.1.5.6
NTF accRmReqResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.1			This trap is generated when a particular command which is a part of feature that is set to ON from OFF using the EME feature indicating that a reload can actually bring that feature effective. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmFeatureTrap	1.3.6.1.4.1.5.1.1.5.6.0.2			This trap is generated when a particular command which is a part of feature that is set to OFF using the EME feature. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmCardRemovedTrap	1.3.6.1.4.1.5.1.1.5.6.0.3			This indicates that a Card has been removed and tried to acticvate or deactivate the respective card SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.4			When the command to activate a card is issued. This trap indicates the activation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.5			When the command to activate card is issued. This trap indicates the activation has started SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmActvFailTrap	1.3.6.1.4.1.5.1.1.5.6.0.6			When the command (set slot state) to activate card is issued. This trap is generated in case of a failure or Mismatch of the slot. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmDeActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.7			When the command (set slot state) to deactivate card is issued. This trap indicates the deactivation has started. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmDeActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.8			When the command (set slot state) to deactivate a card is issued. This trap indicates the deactivation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmCardRemvdTrap	1.3.6.1.4.1.5.1.1.5.6.0.9			This indicates that a Card has been removed after deactivating the slot using the set slot state command SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmInvStateTrap	1.3.6.1.4.1.5.1.1.5.6.0.10			If the card is BUSY and cannot be deactivated this trap is generated SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFaultHndlTrap	1.3.6.1.4.1.5.1.1.5.6.0.11			Fault Hndl, Invalid State SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFaultIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.12			Fault Indication (reason), Slot SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmDataCallTrap	1.3.6.1.4.1.5.1.1.5.6.0.13			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataEnableTrap	1.3.6.1.4.1.5.1.1.5.6.0.14			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the initiate data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataCallAccptTrap	1.3.6.1.4.1.5.1.1.5.6.0.15			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataSwitchTrap	1.3.6.1.4.1.5.1.1.5.6.0.16			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmFrmWareLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.17			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmBfrAllocTrap	1.3.6.1.4.1.5.1.1.5.6.0.18			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.19			If the file is corrupted the loading is aborted and is indicated by this trap. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 253
NTF accRmFrmwrCompatiblTrap	1.3.6.1.4.1.5.1.1.5.6.0.20			If the extension is not supported by the version of the apl file then this trap is sent. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 48
NTF accRmLoadTrap5	1.3.6.1.4.1.5.1.1.5.6.0.21			This is basically a revision mismatch. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmSwUpGradeMsgTrap	1.3.6.1.4.1.5.1.1.5.6.0.22			THIS ROUTER WILL NOT OPERATE WITH FULL FUNCTIONALITY UNTIL A VALID KEY HAS BEEN ENTERED SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInSuffRAMTrap	1.3.6.1.4.1.5.1.1.5.6.0.23			This is a memory related trap indicating that sufficient RAM is not on the borad, so that the admin can take the appropriate action of increasing the memory or replacing the memory. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmPwrSplyMalfnTrap	1.3.6.1.4.1.5.1.1.5.6.0.24			This is a TIGRIS Power supply trap indicating that the one of the Power Supply is not OK and should be replaced. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrSplyStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.25			When one of the DUAL TIGRIS Power supply is removed or inserted this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmFanStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.26			If the fan in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmDcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.27			If the AC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmAcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.28			If the DC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwr1PresTrap	1.3.6.1.4.1.5.1.1.5.6.0.29			If the power supply is removed or installed this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrFan1Trap	1.3.6.1.4.1.5.1.1.5.6.0.30			If the Tigris power supply fan fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmPwrDc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.31			If the Tigris power supply DC Component fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrAc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.32			If the Tigris power supply AC Component fails or recovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmEalm2Trap	1.3.6.1.4.1.5.1.1.5.6.0.33			Trap indicating the external 2nd alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmEalm1Trap	1.3.6.1.4.1.5.1.1.5.6.0.34			Trap indicating the external 1st alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmChasFanPresTrap	1.3.6.1.4.1.5.1.1.5.6.0.35			Trap indicating the status of the chasis fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmChasFanIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.36			Trap indicating the status of the chasis fan whether it failed or recovered. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmLowMemTrap	1.3.6.1.4.1.5.1.1.5.6.0.37			This indicates very clearly that the Memory is very low and the admin has to do some dagnostics and take a quick action on the various memory critical issues for instance like trap log size etc., SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmLanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.38			When the diagnostics on the particular LAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmWanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.39			When the diagnostics on the particular WAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmCardDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.40			When the diagnostics on the particular CARD slot fails this trap is generated. Indicating that there is some problem with that CARD. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.41			This trap is to prompt the admin to reset the router as he would have changed some settings and they will be effective only after a reset for example change/deletion in static routing entry on a particular interface. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmIdbTrap	1.3.6.1.4.1.5.1.1.5.6.0.42			SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmLdngElemManTrap	1.3.6.1.4.1.5.1.1.5.6.0.43			Browser loading Element Manager at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInterFileJavaManTrap	1.3.6.1.4.1.5.1.1.5.6.0.44			Intermediate file sent to Java Manager %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmBrowLdngSetupWizTrap	1.3.6.1.4.1.5.1.1.5.6.0.45			Browser loading Java Setup Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmConfWizLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.46			Configuration Wizard is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmPriConfScrTrap	1.3.6.1.4.1.5.1.1.5.6.0.47			Primary config script sent to Configuration Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInstAccAppLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.48			Instant Access applet is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
STR accCardSlotTrapMsg	1.3.6.1.4.1.5.1.1.5.6.1	DisplayString	read-only	Enterprise Trap Message for CardSlot

Counter (3)
CTR accSlotInPkts	1.3.6.1.4.1.5.1.1.5.2.1.11	Counter	read-only	Number of packets received on this physical interface.
CTR accSlotNumChanges	1.3.6.1.4.1.5.1.1.5.2.1.21	Counter	read-only	Number of times that this interface has changed state (either up-to-down or down-to-up).
CTR accSlotOutPkts	1.3.6.1.4.1.5.1.1.5.2.1.17	Counter	read-only	Number of packets transmitted on this physical interface.
DisplayString (5)
STR accCardSlotPortCnf	1.3.6.1.4.1.5.1.1.5.3.1.5	DisplayString	read-only	A printable ASCII string representing the interface configuration on this slot.
STR accCardSlotRevNum	1.3.6.1.4.1.5.1.1.5.3.1.3	DisplayString	read-only	A printable ASCII string representing the card rev number.
STR accCardSlotSerNum	1.3.6.1.4.1.5.1.1.5.3.1.4	DisplayString	read-only	A printable ASCII string representing the card serial num.
STR accCardSlotTrapMsg	1.3.6.1.4.1.5.1.1.5.6.1	DisplayString	read-only	Enterprise Trap Message for CardSlot
STR accSlotDialAddress	1.3.6.1.4.1.5.1.1.5.2.1.33	DisplayString	read-write	Dial Address.
INTEGER (29)
INT accCardCircuitIndex	1.3.6.1.4.1.5.1.1.5.5.1.4	INTEGER	read-only	The ifIndex for this circuit.
INT accCardCircuitInterfaceNum	1.3.6.1.4.1.5.1.1.5.5.1.3	INTEGER	read-only	The interface number that this circuit resides on - corresponds to accCardInterfaceNum.
INT accCardCircuitNum	1.3.6.1.4.1.5.1.1.5.5.1.1	INTEGER	read-only	An integer that uniquely identifies the circuit within the interface.
INT accCardCircuitSlotNum	1.3.6.1.4.1.5.1.1.5.5.1.2	INTEGER	read-only	The slot number that this circuit resides on - corresponds to accCardSlotNum.
INT accCardInterfaceIndex	1.3.6.1.4.1.5.1.1.5.4.1.4	INTEGER	read-only	The ifIndex for this interface.
INT accCardInterfaceNum	1.3.6.1.4.1.5.1.1.5.4.1.1	INTEGER	read-only	An integer that uniquely identifies the interface within the slot card.
INT accCardInterfaceSlotNum	1.3.6.1.4.1.5.1.1.5.4.1.3	INTEGER	read-only	The slot number that this interface resides on - corresponds to accCardSlotNum.
INT accCardInterfaceType	1.3.6.1.4.1.5.1.1.5.4.1.2	INTEGER	read-only	The interface type - need to define enumerations here !!
INT accCardSlotAdminState	1.3.6.1.4.1.5.1.1.5.3.1.6	INTEGER	read-write	An integer value which uniquely identifies the card administration state.
INT accCardSlotIndex	1.3.6.1.4.1.5.1.1.5.3.1.8	INTEGER	read-only	The ifIndex for this slot.
INT accCardSlotNum	1.3.6.1.4.1.5.1.1.5.3.1.1	INTEGER	read-only	An integer that uniquely identifies the card slot within the system chassis.
INT accCardSlotNum11Slot	1.3.6.1.4.1.5.1.1.5.3.1.9	INTEGER	read-only	An integer that uniquely identifies the card slot within the 11-Slot system chassis. This can be used as an alternate index into accCardSlotTable.
INT accCardSlotOperState	1.3.6.1.4.1.5.1.1.5.3.1.7	INTEGER	read-write	An integer value which uniquely identifies the card operational state.
INT accCardSlotType	1.3.6.1.4.1.5.1.1.5.3.1.2	INTEGER	read-only	An integer value which uniquely identifies the card type.
INT accSlotClockMode	1.3.6.1.4.1.5.1.1.5.2.1.23	INTEGER	read-write	Clock mode of this port
INT accSlotCompressDcs221P1	1.3.6.1.4.1.5.1.1.5.2.1.31	INTEGER	read-write	Compression Mode
INT accSlotCompressMaxStreams	1.3.6.1.4.1.5.1.1.5.2.1.35	INTEGER	read-write	The maximum number of independent data streams for this physical port. This object determines the size of the history buffer pool.
INT accSlotCompressMessageLevel	1.3.6.1.4.1.5.1.1.5.2.1.36	INTEGER	read-write	.
INT accSlotCompressMode	1.3.6.1.4.1.5.1.1.5.2.1.27	INTEGER	read-write	Establishes operational mode of Data Compression. This functionality is appropriate for serial lines.
INT accSlotCompressRevision	1.3.6.1.4.1.5.1.1.5.2.1.34	INTEGER	read-write	Indicates which data compression algorithm should be used for this physical port. If the confi gured protocol is Frame Relay, X.25 or PPP, the com pression mode must be new. If the configured protocol is LAPB, OLD indicates that the neighbor is running a release which predates 7.2 and the old compression algorithm should be used.
INT accSlotCompressV42bisP1	1.3.6.1.4.1.5.1.1.5.2.1.29	INTEGER	read-only	Number of codewords
INT accSlotCompressV42bisP2	1.3.6.1.4.1.5.1.1.5.2.1.30	INTEGER	read-only	Maximum string size
INT accSlotDialProcedure	1.3.6.1.4.1.5.1.1.5.2.1.25	INTEGER	read-write	Dial Procedure.
INT accSlotE1FrameMode	1.3.6.1.4.1.5.1.1.5.2.1.38	INTEGER	read-write	.
INT accSlotIfType	1.3.6.1.4.1.5.1.1.5.2.1.37	INTEGER	read-write	.
INT accSlotProtocol	1.3.6.1.4.1.5.1.1.5.2.1.22	INTEGER	read-write	Protocol used on this slot. note that these enumerated values match those in accBrPortProtocol.
INT accSlotQueueMode	1.3.6.1.4.1.5.1.1.5.2.1.24	INTEGER	read-write	Queuing mode for this slot Fair queuing provides per-conversation bandwidth allocation, with additional bandwidth allocated to higher priority traffic. Precedence queueing gives first-in-first-out service amongst priority queues.
INT accSlotResyncMode	1.3.6.1.4.1.5.1.1.5.2.1.26	INTEGER	read-write	Establishes operational mode of the Resync function for crypto gear. When active, a link-down condition intitiates resynchronization, which is manifested by setting the DTR (RTS) signal active (low) for 10 milliseconds.
INT accSlotSevereCongPct	1.3.6.1.4.1.5.1.1.5.2.1.32	INTEGER	read-write	Percent Congested
OCTET STRING (1)
OCT accSlotLastChangeY2K	1.3.6.1.4.1.5.1.1.5.2.1.39	OCTET STRING	read-only	Time when a state change was last detected on this physical port. The seven byte long octet string represents year 2000 compliant date and time, and is laid out in the following structured format: 2 Byte unsigned short value of year 1 Byte value of month 1 Byte value of day of the month 1 Byte value of hour 1 Byte value of minutes 1 Byte value of seconds
No type (58)
accCardCircuitEntry	1.3.6.1.4.1.5.1.1.5.5.1		not-accessible	Contains a summary of objects for a circuit entry.
accCardCircuitTable	1.3.6.1.4.1.5.1.1.5.5		not-accessible	A table providing information for each circuit installed in the system chassis, indicating how they relate to slots and interfaces.
accCardInterfaceEntry	1.3.6.1.4.1.5.1.1.5.4.1		not-accessible	Contains a summary of objects for an interface entry.
accCardInterfaceTable	1.3.6.1.4.1.5.1.1.5.4		not-accessible	A table providing interface information for each interface on the system indicating how they relate to system slots.
accCardSlotEntry	1.3.6.1.4.1.5.1.1.5.3.1		not-accessible	Contains a summary of objects for a slot entry.
accCardSlotTable	1.3.6.1.4.1.5.1.1.5.3		not-accessible	A table providing objects for each installed card in the system chassis slots.
accCardSlotTraps	1.3.6.1.4.1.5.1.1.5.6
NTF accRmAcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.28			If the DC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.4			When the command to activate a card is issued. This trap indicates the activation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmActvFailTrap	1.3.6.1.4.1.5.1.1.5.6.0.6			When the command (set slot state) to activate card is issued. This trap is generated in case of a failure or Mismatch of the slot. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.5			When the command to activate card is issued. This trap indicates the activation has started SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmBfrAllocTrap	1.3.6.1.4.1.5.1.1.5.6.0.18			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmBrowLdngSetupWizTrap	1.3.6.1.4.1.5.1.1.5.6.0.45			Browser loading Java Setup Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmCardDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.40			When the diagnostics on the particular CARD slot fails this trap is generated. Indicating that there is some problem with that CARD. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmCardRemovedTrap	1.3.6.1.4.1.5.1.1.5.6.0.3			This indicates that a Card has been removed and tried to acticvate or deactivate the respective card SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmCardRemvdTrap	1.3.6.1.4.1.5.1.1.5.6.0.9			This indicates that a Card has been removed after deactivating the slot using the set slot state command SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmChasFanIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.36			Trap indicating the status of the chasis fan whether it failed or recovered. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmChasFanPresTrap	1.3.6.1.4.1.5.1.1.5.6.0.35			Trap indicating the status of the chasis fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmConfWizLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.46			Configuration Wizard is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmDataCallAccptTrap	1.3.6.1.4.1.5.1.1.5.6.0.15			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataCallTrap	1.3.6.1.4.1.5.1.1.5.6.0.13			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataEnableTrap	1.3.6.1.4.1.5.1.1.5.6.0.14			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the initiate data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDataSwitchTrap	1.3.6.1.4.1.5.1.1.5.6.0.16			This is the trap generated in Congo Voice router which has a physical switch for Data enable. If it is OFF and the data call request has come, then this trap can be generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmDcStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.27			If the AC componemt in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmDeActvComplTrap	1.3.6.1.4.1.5.1.1.5.6.0.8			When the command (set slot state) to deactivate a card is issued. This trap indicates the deactivation was sucessfully done SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmDeActvStartTrap	1.3.6.1.4.1.5.1.1.5.6.0.7			When the command (set slot state) to deactivate card is issued. This trap indicates the deactivation has started. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmEalm1Trap	1.3.6.1.4.1.5.1.1.5.6.0.34			Trap indicating the external 1st alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmEalm2Trap	1.3.6.1.4.1.5.1.1.5.6.0.33			Trap indicating the external 2nd alarm status of the fan. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmFanStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.26			If the fan in the TIGRIS power supply fails or receovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmFaultHndlTrap	1.3.6.1.4.1.5.1.1.5.6.0.11			Fault Hndl, Invalid State SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFaultIndTrap	1.3.6.1.4.1.5.1.1.5.6.0.12			Fault Indication (reason), Slot SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmFeatureTrap	1.3.6.1.4.1.5.1.1.5.6.0.2			This trap is generated when a particular command which is a part of feature that is set to OFF using the EME feature. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmFrmWareLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.17			This is a trap which is because of a alloc failure due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmFrmwrCompatiblTrap	1.3.6.1.4.1.5.1.1.5.6.0.20			If the extension is not supported by the version of the apl file then this trap is sent. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 48
NTF accRmIdbTrap	1.3.6.1.4.1.5.1.1.5.6.0.42			SEVERITY-DEFAULT: Indeterminate EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 0
NTF accRmInstAccAppLddTrap	1.3.6.1.4.1.5.1.1.5.6.0.48			Instant Access applet is being loaded by the browser at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInSuffRAMTrap	1.3.6.1.4.1.5.1.1.5.6.0.23			This is a memory related trap indicating that sufficient RAM is not on the borad, so that the admin can take the appropriate action of increasing the memory or replacing the memory. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmInterFileJavaManTrap	1.3.6.1.4.1.5.1.1.5.6.0.44			Intermediate file sent to Java Manager %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmInvStateTrap	1.3.6.1.4.1.5.1.1.5.6.0.10			If the card is BUSY and cannot be deactivated this trap is generated SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 15
NTF accRmLanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.38			When the diagnostics on the particular LAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
NTF accRmLdngElemManTrap	1.3.6.1.4.1.5.1.1.5.6.0.43			Browser loading Element Manager at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmLoadAbortTrap	1.3.6.1.4.1.5.1.1.5.6.0.19			If the file is corrupted the loading is aborted and is indicated by this trap. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 253
NTF accRmLoadTrap5	1.3.6.1.4.1.5.1.1.5.6.0.21			This is basically a revision mismatch. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmLowMemTrap	1.3.6.1.4.1.5.1.1.5.6.0.37			This indicates very clearly that the Memory is very low and the admin has to do some dagnostics and take a quick action on the various memory critical issues for instance like trap log size etc., SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 32
NTF accRmPriConfScrTrap	1.3.6.1.4.1.5.1.1.5.6.0.47			Primary config script sent to Configuration Wizard at %s SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmPwr1PresTrap	1.3.6.1.4.1.5.1.1.5.6.0.29			If the power supply is removed or installed this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrAc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.32			If the Tigris power supply AC Component fails or recovered this trap is generated. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrDc1Trap	1.3.6.1.4.1.5.1.1.5.6.0.31			If the Tigris power supply DC Component fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrFan1Trap	1.3.6.1.4.1.5.1.1.5.6.0.30			If the Tigris power supply fan fails or recovered this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 207
NTF accRmPwrSplyMalfnTrap	1.3.6.1.4.1.5.1.1.5.6.0.24			This is a TIGRIS Power supply trap indicating that the one of the Power Supply is not OK and should be replaced. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmPwrSplyStatTrap	1.3.6.1.4.1.5.1.1.5.6.0.25			When one of the DUAL TIGRIS Power supply is removed or inserted this trap is generated. SEVERITY-VARIABLE: accTrapLogSeverityType EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 158
NTF accRmReqResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.1			This trap is generated when a particular command which is a part of feature that is set to ON from OFF using the EME feature indicating that a reload can actually bring that feature effective. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 46
NTF accRmResetTrap	1.3.6.1.4.1.5.1.1.5.6.0.41			This trap is to prompt the admin to reset the router as he would have changed some settings and they will be effective only after a reset for example change/deletion in static routing entry on a particular interface. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmSwUpGradeMsgTrap	1.3.6.1.4.1.5.1.1.5.6.0.22			THIS ROUTER WILL NOT OPERATE WITH FULL FUNCTIONALITY UNTIL A VALID KEY HAS BEEN ENTERED SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 7
NTF accRmWanDiagsTrap	1.3.6.1.4.1.5.1.1.5.6.0.39			When the diagnostics on the particular WAN slot fails this trap is generated. Indicating that there is some problem with that interface. SEVERITY-DEFAULT: Critical EVENTTYPE-DEFAULT: 4 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accCardSlotTrapMsg } PCAUSE-DEFAULT: 6
accSlot	1.3.6.1.4.1.5.1.1.5
accSlotEntry	1.3.6.1.4.1.5.1.1.5.2.1		not-accessible	A table entry providing information about a specific physical port.
accSlotTable	1.3.6.1.4.1.5.1.1.5.2		not-accessible	A list of physical port entries. The number of entries is given by the value of accSlotNum.

RFC description

Monitors ACC bridge physical port interface statistics including packet counts, state changes, and compression configuration.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-SLOT

This MIB depends on

Related MIBs

What Is ACC-SLOT?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description