All MIBs › ACC-SLOT › accSlotDialProcedure
accSlotDialProcedure
Module: ACC-SLOT
OID (symbolic): ACC-SLOT::accSlotDialProcedure
OID (numeric): 1.3.6.1.4.1.5.1.1.5.2.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Dial Procedure.
What is accSlotDialProcedure?
This enumerated setting specifies the dialing method and procedure to use when the slot interface initiates an outbound dial connection. Network engineers configure this for dial-on-demand or modem-based links to control whether the device uses touch-tone (DTMF) or pulse dialing. Setting accSlotDialProcedure to 'DTMF' tells the modem to use touch-tone dialing instead of legacy pulse dialing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.25 snmpwalk -v2c -c public <target> ACC-SLOT::accSlotDialProcedure
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.25.1 snmpget -v2c -c public <target> ACC-SLOT::accSlotDialProcedure.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.5.2.1.25.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5 | accSlot | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2 | accSlotTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1 | accSlotEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1.25 | accSlotDialProcedure | ACC-SLOT |