All MIBs › ACC-SLOT › accSlotE1FrameMode
accSlotE1FrameMode
Module: ACC-SLOT
OID (symbolic): ACC-SLOT::accSlotE1FrameMode
OID (numeric): 1.3.6.1.4.1.5.1.1.5.2.1.38
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
.
What is accSlotE1FrameMode?
This enumerated setting configures the E1 digital line framing mode (such as CRC4 or non-CRC4 frame alignment) when the slot contains an E1 interface. Network engineers adjust this to match the carrier's E1 service configuration and to ensure proper frame synchronization with the telecom provider's equipment. Setting accSlotE1FrameMode to 'CRC4' enables CRC4 frame alignment, which allows the carrier to perform performance monitoring on the E1 circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.38 snmpwalk -v2c -c public <target> ACC-SLOT::accSlotE1FrameMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.38.1 snmpget -v2c -c public <target> ACC-SLOT::accSlotE1FrameMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.5.2.1.38.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5 | accSlot | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2 | accSlotTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1 | accSlotEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1.38 | accSlotE1FrameMode | ACC-SLOT |