All MIBs › ACC-SLOT › accSlotCompressDcs221P1
accSlotCompressDcs221P1
Module: ACC-SLOT
OID (symbolic): ACC-SLOT::accSlotCompressDcs221P1
OID (numeric): 1.3.6.1.4.1.5.1.1.5.2.1.31
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Compression Mode
What is accSlotCompressDcs221P1?
This enumerated setting selects which compression algorithm variant (such as standard DCS compression or proprietary modes) should be used for this slot interface. Network engineers configure this to match the compression capability supported by the remote device, especially on older protocols or legacy systems. Setting accSlotCompressDcs221P1 to mode '1' might activate a device-specific compression scheme optimized for older equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.31 snmpwalk -v2c -c public <target> ACC-SLOT::accSlotCompressDcs221P1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.31.1 snmpget -v2c -c public <target> ACC-SLOT::accSlotCompressDcs221P1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.5.2.1.31.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5 | accSlot | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2 | accSlotTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1 | accSlotEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1.31 | accSlotCompressDcs221P1 | ACC-SLOT |