All MIBs › ACC-SLOT › accSlotResyncMode
accSlotResyncMode
Module: ACC-SLOT
OID (symbolic): ACC-SLOT::accSlotResyncMode
OID (numeric): 1.3.6.1.4.1.5.1.1.5.2.1.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Establishes operational mode of the Resync function for crypto gear. When active, a link-down condition intitiates resynchronization, which is manifested by setting the DTR (RTS) signal active (low) for 10 milliseconds.
What is accSlotResyncMode?
This setting controls whether automatic resynchronization is enabled for cryptographic or secure hardware installed in this slot when a link failure occurs. Network engineers activate this for encrypted connections that require automatic re-keying or hardware reset when the physical link goes down. When accSlotResyncMode is active and a link-down condition happens, the device automatically pulses the DTR signal for 10 milliseconds to resynchronize the crypto hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.26 snmpwalk -v2c -c public <target> ACC-SLOT::accSlotResyncMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.26.1 snmpget -v2c -c public <target> ACC-SLOT::accSlotResyncMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.5.2.1.26.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5 | accSlot | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2 | accSlotTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1 | accSlotEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1.26 | accSlotResyncMode | ACC-SLOT |