All MIBs › AC-SS7-MIB
Organization: AudioCodes Ltd
Last Updated: 2009-12-02
Category: Telephony and VoIP, Vendor: AudioCodes
Description: Manages SS7 (Signaling System 7) protocol stack configuration on AudioCodes gateway platforms, including MTP2/MTP3 link sets, routes, and ISUP variant settings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AC-SS7-MIB?
AC-SS7-MIB is a vendor MIB from AudioCodes that manages the SS7 (Signaling System 7) protocol stack configuration on AudioCodes gateway platforms, covering MTP2/MTP3 link set configuration, SS7 routes, and ISUP variant settings used for PSTN call signaling interoperability. It exposes configuration objects defining how the gateway's SS7 stack is set up: link sets, routing between signaling points, and which national/international ISUP variant is in use. Its monitoring value lies primarily in configuration correctness and, where link/route status objects exist, in surfacing signaling-link software status such as an SS7 link set being down, which would block call establishment even if the gateway hardware itself is healthy. It depends on the ITU-T/ANSI SS7 protocol standards for its object semantics and is complementary to the AC-PM-SS7-MIB, which provides the performance-counter side of the same subsystem. It is deployed on AudioCodes gateways interconnecting with PSTN switches via SS7 signaling in carrier networks. Engineers can download the AC-SS7-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AC-SS7-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes gateway (SS7 signaling)
Monitoring Examples
No concrete sample objects were supplied for this module, so specific object names cannot be grounded; conceptually an administrator would check SS7 link set and route configuration/status objects to confirm signaling links are up and using the correct ISUP variant, but naming exact objects here would be speculative.
This MIB depends on
Related MIBs
Imported Objects
From AUDIOCODES-TYPES-MIB
| acBoardMibs | OBJECT-IDENTITY |
| acGeneric | OBJECT-IDENTITY |
| acProducts | OBJECT-IDENTITY |
| acRegistrations | OBJECT-IDENTITY |
| audioCodes | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From RFC1155-SMI
| IpAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus | |
| TAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| acSS7 | 1.3.6.1.4.1.5003.9.10.12 | |||
| acSS7AliasPointCode | 1.3.6.1.4.1.5003.9.10.12.1.4.33 | |||
| INT acSS7APCAction | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.4 | INTEGER | read-create | Management field for ACTIONS. AC INI-Param: SS7_APC_ACTION |
| INT acSS7APCActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.5 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_APC_ACTION_RESULT |
| INT acSS7APCAdminState | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.10 | INTEGER | read-only | Administrative state of Alias PC. AC INI-Param: SS7_ALIAS_PC_ADMINISTRATIVE_STATE |
| acSS7APCEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1 | not-accessible | ||
| U32 acSS7APCIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.2 | Unsigned32 | not-accessible | Second Index Field for line: Alias PC index. AC INI-Param: SS7_APC_INNER_INDEX |
| INT acSS7APCMtcBusy | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.9 | INTEGER | read-only | Manual busy status of Alias PC. AC INI-Param: SS7_ALIAS_PC_MTC_BUSY |
| STR acSS7APCName | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.8 | SnmpAdminString | read-create | String name for Alias PC parameters. Access: Online. AC INI-Param: SS7_ALIAS_PC_NAME |
| INT acSS7APCOperState | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.11 | INTEGER | read-only | Operational state of Alias PC. AC INI-Param: SS7_ALIAS_PC_OPERATIONAL_STATE |
| U32 acSS7APCPC | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.6 | Unsigned32 | read-create | Alias Point-Code of signaling node. Access: Online. AC INI-Param: SS7_APC_PC |
| ROW acSS7APCRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.3 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_APC_ROWSTATUS |
| U32 acSS7APCSNI | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.7 | Unsigned32 | read-create | SNI (Signaling Network Indicator) of Alias Point-Code. Access: Online. AC INI-Param: SS7_APC_SNI |
| U32 acSS7APCSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21.1.1 | Unsigned32 | not-accessible | First Index Field for line: Signaling Node Number. AC INI-Param: SS7_APC_SN_INDEX |
| acSS7APCTable | 1.3.6.1.4.1.5003.9.10.12.1.4.33.21 | not-accessible | ||
| acSS7Configuration | 1.3.6.1.4.1.5003.9.10.12.1 | |||
| acSS7Constants | 1.3.6.1.4.1.5003.9.10.12.2.1 | |||
| U32 acSS7ConstantsNumberOfLinks | 1.3.6.1.4.1.5003.9.10.12.2.1.2 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfLinkSetsPerSN | 1.3.6.1.4.1.5003.9.10.12.2.1.3 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfLinkSetTimerSets | 1.3.6.1.4.1.5003.9.10.12.2.1.8 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfLinksPerLinkSet | 1.3.6.1.4.1.5003.9.10.12.2.1.4 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfNodes | 1.3.6.1.4.1.5003.9.10.12.2.1.1 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfNodeTimerSets | 1.3.6.1.4.1.5003.9.10.12.2.1.7 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfRouteSetsPerSN | 1.3.6.1.4.1.5003.9.10.12.2.1.5 | Unsigned32 | read-only | AC INI-Param: N/A |
| U32 acSS7ConstantsNumberOfRoutesPerRouteSets | 1.3.6.1.4.1.5003.9.10.12.2.1.6 | Unsigned32 | read-only | AC INI-Param: N/A |
| acSS7LinkATMEntry | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1 | not-accessible | ||
| U32 acSS7LinkATMSAALLinkInterfaceNum | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1.3 | Unsigned32 | read-create | ATM SAAL link port num. Access: Online. AC INI-Param: ATM_SAAL_LINK_PORT_NUM |
| U32 acSS7LinkATMSAALLinkProfileNum | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1.1 | Unsigned32 | read-create | ATM SAAL Link profile number. Access: Online. AC INI-Param: ATM_SAAL_LINK_PROFILE_NUM |
| INT acSS7LinkATMSAALLinkType | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1.2 | INTEGER | read-create | ATM SAAL link Type PVC/SVC. Access: Online. AC INI-Param: ATM_SAAL_LINK_TYPE |
| U32 acSS7LinkATMSAALLinkVCI | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1.5 | Unsigned32 | read-create | ATM SAAL link VCI. Access: Online. AC INI-Param: ATM_SAAL_LINK_VCI |
| U32 acSS7LinkATMSAALLinkVPI | 1.3.6.1.4.1.5003.9.10.12.1.3.24.1.4 | Unsigned32 | read-create | ATM SAAL link VPI. Access: Online. AC INI-Param: ATM_SAAL_LINK_VPI |
| acSS7LinkATMTable | 1.3.6.1.4.1.5003.9.10.12.1.3.24 | not-accessible | ||
| INT acSS7LinkCommonAction | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.3 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_LINK_ACTION |
| INT acSS7LinkCommonActionResult | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.4 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_LINK_ACTION_RESULT |
| INT acSS7LinkCommonAdminState | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.6 | INTEGER | read-only | Administrative state of singnalling link. AC INI-Param: SS7_LINK_ADMINISTRATIVE_STATE |
| acSS7LinkCommonEntry | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1 | not-accessible | ||
| U32 acSS7LinkCommonIndex | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: MAX_SIGNALING_LINKS_PER_CARD |
| INT acSS7LinkCommonL2TypeSelector | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.9 | INTEGER | read-create | Link layer 2 type - defines level 2 media of signaling link. Access: Online. AC INI-Param: SS7_LINK_L2_TYPE |
| INT acSS7LinkCommonL3TypeSelector | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.10 | INTEGER | read-create | Link high layer type - defines level 3 or L2 high layer of signalling link. Access: Online. AC INI-Param: SS7_LINK_L3_TYPE |
| INT acSS7LinkCommonMonSuFilterRequest | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.14 | INTEGER | read-create | SS7 Monitoring link SU filter- Defines the type of SU message to filter. 0: Filter all types of SU messages 1: Filter LSSU and FISU messages 2: Filter only FISU messages 3: Do not filter any message. Access: Online. AC INI-Param: SS7_LINK_MON_SU_FILTER |
| INT acSS7LinkCommonMtcBusy | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.12 | INTEGER | read-only | Link local busy indicator - if set, indicates link is busy due to local mtc action. AC INI-Param: SS7_LINK_MTC_BUSY |
| STR acSS7LinkCommonName | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.5 | SnmpAdminString | read-create | String name for Link paramaters. Access: Online. AC INI-Param: SS7_LINK_NAME |
| INT acSS7LinkCommonOperState | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.7 | INTEGER | read-only | Operational state of singnalling link. AC INI-Param: SS7_LINK_OPERATIONAL_STATE |
| INT acSS7LinkCommonRdcyBoardNum | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.13 | INTEGER | read-create | Board number in which the link is physically connected. Access: Online. AC INI-Param: SS7_LINK_RDCY_BOARD |
| ROW acSS7LinkCommonRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.2 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_LINK_ROWSTATUS |
| acSS7LinkCommonTable | 1.3.6.1.4.1.5003.9.10.12.1.3.21 | not-accessible | ||
| INT acSS7LinkCommonTraceLevel | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.8 | INTEGER | read-create | Trace level of singnalling link (level 2). Access: Online. AC INI-Param: SS7_LINK_TRACE_LEVEL |
| INT acSS7LinkCommonVariant | 1.3.6.1.4.1.5003.9.10.12.1.3.21.1.11 | INTEGER | read-create | Variant (layer 2) of singnalling link (TDM). Access: Online. AC INI-Param: SS7_LINK_LAYER2_VARIANT |
| acSS7Links | 1.3.6.1.4.1.5003.9.10.12.1.3 | |||
| INT acSS7LinkSetAction | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.4 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_LINKSET_ACTION |
| INT acSS7LinkSetActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.5 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_SN_ACTION_RESULT |
| INT acSS7LinkSetAdminState | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.7 | INTEGER | read-only | Administrative state of singnalling linkset. AC INI-Param: SS7_LINKSET_ADMINISTRATIVE_STATE |
| U32 acSS7LinkSetDPC | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.10 | Unsigned32 | read-create | Destination Point-Code of singnalling linkset. Access: Online. AC INI-Param: SS7_LINKSET_DPC |
| acSS7LinkSetEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1 | not-accessible | ||
| INT acSS7LinkSetLinkAction | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.5 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_LINKSETLINK_ACTION |
| INT acSS7LinkSetLinkActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.6 | INTEGER | read-only | Management field for ACTIONS RESULT. AC INI-Param: SS7_LINKSETLINK_ACTION_RESULT |
| acSS7LinkSetLinkEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1 | not-accessible | ||
| U32 acSS7LinkSetLinkInnerLinkIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.3 | Unsigned32 | not-accessible | Third Index Field for line: Inner Link Index in Signalling Linkset. AC INI-Param: SS7_LINKSETLINK_INNER_LINK_INDEX |
| U32 acSS7LinkSetLinkLinkNo | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.7 | Unsigned32 | read-create | Physical number of signalling link which is part of the Linkset. Access: Online. AC INI-Param: SS7_LINKSETLINK_LINK_NUMBER |
| U32 acSS7LinkSetLinkLinksetIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.2 | Unsigned32 | not-accessible | Second Index Field for line: Signalling Linkset Number. AC INI-Param: SS7_LINKSETLINK_LINKSET_INDEX |
| U32 acSS7LinkSetLinkLinkSlc | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.8 | Unsigned32 | read-create | SLC number of signaling link which is part of the Linkset. Access: Online. AC INI-Param: SS7_LINKSETLINK_LINK_SLC |
| ROW acSS7LinkSetLinkRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.4 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_LINKSETLINK_ROWSTATUS |
| U32 acSS7LinkSetLinksAltMask | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.12 | Unsigned32 | read-create | Alternate mask for links within singnalling linkset. Access: Online. AC INI-Param: SS7_LINKSET_ALTERNATE_MASK |
| U32 acSS7LinkSetLinksMask | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.11 | Unsigned32 | read-create | Mask for links within singnalling linkset. Access: Online. AC INI-Param: SS7_LINKSET_MASK |
| U32 acSS7LinkSetLinkSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22.1.1 | Unsigned32 | not-accessible | First Index Field for line: Signalling Node Number. AC INI-Param: SS7_LINKSETLINK_SN_INDEX |
| acSS7LinkSetLinkTable | 1.3.6.1.4.1.5003.9.10.12.1.4.31.22 | not-accessible | ||
| U32 acSS7LinkSetLksetIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.2 | Unsigned32 | not-accessible | Second Index Field for line. AC INI-Param: SS7_LINKSET_LINKSET_INDEX |
| INT acSS7LinkSetMtcBusyState | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.9 | INTEGER | read-only | Manual busy status of singnalling linkset. AC INI-Param: SS7_LINKSET_MTC_BUSY_STATUS |
| STR acSS7LinkSetName | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.6 | SnmpAdminString | read-create | String name for LINKSET Params. Access: Online. AC INI-Param: SS7_LINKSET_NAME |
| INT acSS7LinkSetOperState | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.8 | INTEGER | read-only | Operational state of singnalling linkset. AC INI-Param: SS7_LINKSET_OPERATIONAL_STATE |
| ROW acSS7LinkSetRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.3 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_LINKSET_ROWSTATUS |
| acSS7LinkSets | 1.3.6.1.4.1.5003.9.10.12.1.4.31 | |||
| U32 acSS7LinkSetSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.1 | Unsigned32 | not-accessible | First Index Field for line. AC INI-Param: SS7_LINKSET_SN_INDEX |
| acSS7LinkSetTable | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21 | not-accessible | ||
| INT acSS7LinkSetTimersAction | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.3 | INTEGER | read-write | management Field for ACTIONS. AC INI-Param: SS7_LKSETTIMERS_ACTION |
| INT acSS7LinkSetTimersActionResult | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.4 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_LKSETTIMERS_ACTION_RESULT |
| acSS7LinkSetTimersEntry | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1 | not-accessible | ||
| INT acSS7LinkSetTimersIdx | 1.3.6.1.4.1.5003.9.10.12.1.4.31.21.1.13 | INTEGER | read-create | Timers Index of singnalling linkset. Access: Online. AC INI-Param: SS7_LINKSET_TIMERS_INDEX |
| U32 acSS7LinkSetTimersIndex | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: acSS7LKSETTIMERS_PS_PARAMETER_INDEX |
| INT acSS7LinkSetTimersIsUsed | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.2 | INTEGER | read-only | AC INI-Param: N/A |
| STR acSS7LinkSetTimersName | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.5 | SnmpAdminString | read-write | String name for Linkset timer-set. Access: Online. AC INI-Param: SS7_LKSETTIMERS_NAME |
| U32 acSS7LinkSetTimersT1 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.8 | Unsigned32 | read-write | Delay to avoid message mis-sequencing on changeover. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T1 |
| U32 acSS7LinkSetTimersT12 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.14 | Unsigned32 | read-write | Waiting for uninhibit acknowledgement. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T12 |
| U32 acSS7LinkSetTimersT13 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.15 | Unsigned32 | read-write | Waiting for force uninhibit. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T13 |
| U32 acSS7LinkSetTimersT14 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.16 | Unsigned32 | read-write | Waiting for inhibition acknowledgement. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T14 |
| U32 acSS7LinkSetTimersT17 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.17 | Unsigned32 | read-write | Delay to avoid oscillation of initial alignment failure and link restart. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T17 |
| U32 acSS7LinkSetTimersT1SLT | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.6 | Unsigned32 | read-write | Supervision timer for signalling link test acknowledgement message. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T1SLT |
| U32 acSS7LinkSetTimersT2 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.9 | Unsigned32 | read-write | Waiting for changeover acknowledgement. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T2 |
| U32 acSS7LinkSetTimersT20ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.18 | Unsigned32 | read-write | Local inhibit test timer. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T20_ANSI |
| U32 acSS7LinkSetTimersT21ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.19 | Unsigned32 | read-write | Remote inhibit test timer. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T21_ANSI |
| U32 acSS7LinkSetTimersT22ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.20 | Unsigned32 | read-write | Local inhibit test timer. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T22_ITU |
| U32 acSS7LinkSetTimersT23ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.21 | Unsigned32 | read-write | Remote inhibit test timer. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T23_ITU |
| U32 acSS7LinkSetTimersT2SLT | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.7 | Unsigned32 | read-write | Interval timer for sending signalling link test messages. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T2SLT |
| U32 acSS7LinkSetTimersT3 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.10 | Unsigned32 | read-write | Time controlled diversion-delay to avoid mis-sequencing on changeback. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T3 |
| U32 acSS7LinkSetTimersT4 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.11 | Unsigned32 | read-write | Waiting for changeback acknowledgement (first attempt). Access: Online. AC INI-Param: SS7_LKSETTIMERS_T4 |
| U32 acSS7LinkSetTimersT5 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.12 | Unsigned32 | read-write | Waiting for changeback acknowledgement (second attempt). Access: Online. AC INI-Param: SS7_LKSETTIMERS_T5 |
| U32 acSS7LinkSetTimersT7 | 1.3.6.1.4.1.5003.9.10.12.1.2.22.1.13 | Unsigned32 | read-write | Waiting for signalling data link connection acknowledgement. Access: Online. AC INI-Param: SS7_LKSETTIMERS_T7 |
| acSS7LinkSetTimersTable | 1.3.6.1.4.1.5003.9.10.12.1.2.22 | not-accessible | ||
| acSS7LinkSigTranEntry | 1.3.6.1.4.1.5003.9.10.12.1.3.23.1 | not-accessible | ||
| I32 acSS7LinkSigTranGroupId | 1.3.6.1.4.1.5003.9.10.12.1.3.23.1.1 | Integer32 | read-create | Group ID (M2UA) of signaling link. Access: Online. AC INI-Param: SS7_LINK_GROUP_ID |
| I32 acSS7LinkSigTranIfid | 1.3.6.1.4.1.5003.9.10.12.1.3.23.1.2 | Integer32 | read-create | Interface ID (M2UA) of singnalling link. Access: Online. AC INI-Param: SS7_LINK_M2UA_IF_ID |
| acSS7LinkSigTranTable | 1.3.6.1.4.1.5003.9.10.12.1.3.23 | not-accessible | ||
| INT acSS7LinkTDMBlock | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.7 | INTEGER | read-only | Link blocked indicator. AC INI-Param: SS7_LINK_BLOCKED |
| U32 acSS7LinkTDMCongestionHighMark | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.6 | Unsigned32 | read-create | Link congestion high mark of signalling link (TDM). Access: Online. AC INI-Param: SS7_CONGESTION_HIGH_MARK |
| U32 acSS7LinkTDMCongestionLowMark | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.5 | Unsigned32 | read-create | Link congestion low mark of signalling link (TDM). Access: Online. AC INI-Param: SS7_CONGESTION_LOW_MARK |
| acSS7LinkTDMEntry | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1 | not-accessible | ||
| INT acSS7LinkTDMInhibit | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.3 | INTEGER | read-only | Link inhibit indicator - if set, indicates link is inhibited.. AC INI-Param: SS7_LINK_INHIBITION |
| INT acSS7LinkTDMMtp2Atts | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.4 | INTEGER | read-create | MTP2 attributes of singnalling link (TDM). Access: Online. AC INI-Param: SS7_LINK_MTP2_ATTRIBUTES |
| acSS7LinkTDMTable | 1.3.6.1.4.1.5003.9.10.12.1.3.22 | not-accessible | ||
| U32 acSS7LinkTDMTimeSlotNumber | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.2 | Unsigned32 | read-create | Time-Slot number of singnalling link (TDM). Access: Online. AC INI-Param: SS7_LINK_TIMESLOT_NUMBER |
| I32 acSS7LinkTDMTrunkNumber | 1.3.6.1.4.1.5003.9.10.12.1.3.22.1.1 | Integer32 | read-create | Trunk number of singnalling link (TDM). Access: Online. AC INI-Param: SS7_LINK_TRUNK_NUMBER |
| INT acSS7LinkTNLAlignmentMode | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.2 | INTEGER | read-create | MTP2 Tunneling: Alignment mode of signalling links in tunnel. Access: Online. AC INI-Param: SS7_LINK_TNL_ALIGNMENT_MODE |
| INT acSS7LinkTNLCongestionMode | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.3 | INTEGER | read-create | MTP2 Tunneling: Congestion mode of signalling links in tunnel. Access: Online. AC INI-Param: SS7_LINK_TNL_CONGESTION_MODE |
| acSS7LinkTNLEntry | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1 | not-accessible | ||
| U32 acSS7LinkTNLOosStartDelayTimer | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.5 | Unsigned32 | read-create | MTP2 Tunneling: OOS start delay timer. Access: Online. AC INI-Param: SS7_LINK_TNL_OOS_START_DELAY_TIMER |
| U32 acSS7LinkTNLOtherSideLinkNum | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.1 | Unsigned32 | read-create | MTP2 Tunneling: MGC link number (MTP2 'other side' of signaling link). Access: Online. AC INI-Param: SS7_LINK_TNL_MGC_LINK_NUMBER |
| acSS7LinkTNLTable | 1.3.6.1.4.1.5003.9.10.12.1.3.25 | not-accessible | ||
| U32 acSS7LinkTNLWaitOtherSideInsvTimer | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.6 | Unsigned32 | read-create | MTP2 Tunneling: wait for other side to be in service timer. Access: Online. AC INI-Param: SS7_LINK_TNL_WAIT_OTHER_SIDE_INSV_TIMER |
| U32 acSS7LinkTNLWaitStartCompTimer | 1.3.6.1.4.1.5003.9.10.12.1.3.25.1.4 | Unsigned32 | read-create | MTP2 Tunneling: wait start complete timer. Access: Online. AC INI-Param: SS7_LINK_TNL_WAIT_START_COMPLETE_TIMER |
| INT acSS7M3UAStaticRoutingAction | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.3 | INTEGER | read-create | This parameter is used for Signaling System 7 (SS7) SIGTRAN (Signaling Transport) interface ID management, for actions. AC INI-Param: SS7_SIG_IF_ID_ACTION |
| U32 acSS7M3UAStaticRoutingActionResult | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.4 | Unsigned32 | read-only | This parameter is used for Signaling System 7 (SS7) SIGTRAN (Signaling Transport) interface ID management, for an action's results. AC INI-Param: SS7_SIG_IF_ID_ACTION_RESULT |
| U32 acSS7M3UAStaticRoutingDestinationPointCode | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.7 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_DestinationPointCode |
| acSS7M3UAStaticRoutingEntry | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1 | not-accessible | ||
| U32 acSS7M3UAStaticRoutingIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.1 | Unsigned32 | not-accessible | This parameter is used for the Signaling System 7 (SS7) interface ID index, for a line. AC INI-Param: M3UAROUTINGCLIST_Index |
| U32 acSS7M3UAStaticRoutingLowerCICValue1 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.14 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_LowerCICValue1 |
| U32 acSS7M3UAStaticRoutingLowerCICValue2 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.16 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_LowerCICValue2 |
| U32 acSS7M3UAStaticRoutingLowerCICValue3 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.18 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_LowerCICValue3 |
| U32 acSS7M3UAStaticRoutingLowerCICValue4 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.20 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_LowerCICValue4 |
| U32 acSS7M3UAStaticRoutingNetworkAppearence | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.8 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_NetworkAppearence |
| U32 acSS7M3UAStaticRoutingOPC1 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.10 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_OPC1 |
| U32 acSS7M3UAStaticRoutingOPC2 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.11 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_OPC2 |
| U32 acSS7M3UAStaticRoutingOPC3 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.12 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_OPC3 |
| U32 acSS7M3UAStaticRoutingOPC4 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.13 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_OPC4 |
| U32 acSS7M3UAStaticRoutingOwnerInterfaceGroup | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.5 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_OwnerInterfaceGroup |
| U32 acSS7M3UAStaticRoutingRC | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.6 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_RoutingContext |
| ROW acSS7M3UAStaticRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.2 | RowStatus | read-create | This parameter is used for the Signaling System 7 (SS7) interface ID row status, for a line. AC INI-Param: SS7_SIG_IF_ID_ROWSTATUS |
| U32 acSS7M3UAStaticRoutingSeriviceIndicatorList | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.9 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_SeriviceIndicatorList |
| acSS7M3UAStaticRoutingTable | 1.3.6.1.4.1.5003.9.10.12.1.5.23 | not-accessible | ||
| U32 acSS7M3UAStaticRoutingUpperCICValue1 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.15 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_UpperCICValue1 |
| U32 acSS7M3UAStaticRoutingUpperCICValue2 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.17 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_UpperCICValue2 |
| U32 acSS7M3UAStaticRoutingUpperCICValue3 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.19 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_UpperCICValue3 |
| U32 acSS7M3UAStaticRoutingUpperCICValue4 | 1.3.6.1.4.1.5003.9.10.12.1.5.23.1.21 | Unsigned32 | read-create | Routing Context list - for M3UA use. Access: Online. AC INI-Param: M3UAROUTINGCLIST_UpperCICValue4 |
| acSS7MTP2 | 1.3.6.1.4.1.5003.9.10.12.1.1 | |||
| U32 acSS7MTP2AttribAERMEmerglThreshold | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.8 | Unsigned32 | read-create | Emergency AERM (alignment error rate monitor) threshold [0 to 10]. Access: Online. AC INI-Param: SS7Mtp2Parms_AermTie |
| U32 acSS7MTP2AttribAERMNormalThreshold | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.7 | Unsigned32 | read-create | Normal AERM (alignment error rate monitor) threshold [0 to 20]. Access: Online. AC INI-Param: SS7Mtp2Parms_AermTin |
| acSS7MTP2AttribEntry | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1 | not-accessible | ||
| STR acSS7MTP2AttribErrorCorectionMethod | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.4 | SnmpAdminString | read-create | Defines the SLI error correction method. B = Basic P = PCR (Preventive Cyclic Retransmission). Access: Online. AC INI-Param: SS7Mtp2Parms_ErrorCorrectionMethod |
| U32 acSS7MTP2AttribIacCp | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.5 | Unsigned32 | read-create | Defines the number of aborted proving attempts before sending an out-of-service to MTP-3. Access: Online. AC INI-Param: SS7Mtp2Parms_IacCp |
| U32 acSS7MTP2AttribIndex | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: SS7Mtp2Parms_Index |
| INT acSS7MTP2AttribIsUsed | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.2 | INTEGER | read-only | Is the row used by alink. If it is the entrow will be read. AC INI-Param: N/A |
| STR acSS7MTP2AttribLinkRate | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.3 | SnmpAdminString | read-create | Defines the SS7 SLI Link Rate. Choose either: A = 64 kbps D = 56 kbps 0 = 64 kbps. Access: Online. AC INI-Param: SS7Mtp2Parms_LinkRate |
| U32 acSS7MTP2AttribLSSULength | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.19 | Unsigned32 | read-create | Defines the SS7 MTP2 LSSU length as 1 or 2 (bytes). Access: Online. AC INI-Param: SS7Mtp2Parms_LssuLength |
| U32 acSS7MTP2AttribOctetCounting | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.10 | Unsigned32 | read-create | Defines the SS7 MTP2 Octet received while the OCTET is in counting mode (# of Octets received - N Octets - while in Octet counting mode). Access: Online. AC INI-Param: SS7Mtp2Parms_OctetCounting |
| U32 acSS7MTP2AttribPcrN2 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.20 | Unsigned32 | read-create | This parameter is used to define Preventive Cyclic Retransmission - the number of message signal unit octets available for retransmission (ITU-T Q703 6.4 - Forced retransmission). Access: Online. AC INI-Param: SS7Mtp2Parms_PcrN2 |
| ROW acSS7MTP2AttribRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.21 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: N/A |
| U32 acSS7MTP2AttribSUERMSigUnitDThreshold | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.9 | Unsigned32 | read-create | Defines the SS7 Signal Unit error rate monitor D threshold. Access: Online. AC INI-Param: SS7Mtp2Parms_SuermSuD |
| U32 acSS7MTP2AttribSUERMThreshold | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.6 | Unsigned32 | read-create | Defines the SS7 SUERM (Signal Unit Error Rate Monitor) T threshold. Access: Online. AC INI-Param: SS7Mtp2Parms_SuermT |
| acSS7MTP2AttribTable | 1.3.6.1.4.1.5003.9.10.12.1.1.21 | not-accessible | ||
| U32 acSS7MTP2AttribTimerT1 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.11 | Unsigned32 | read-create | Defines the SS7 MTP2 T1 alignment ready timer (in msecs). Access: Online. AC INI-Param: SS7Mtp2Parms_T1 |
| U32 acSS7MTP2AttribTimerT2 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.12 | Unsigned32 | read-create | Defines the SS7 MTP2 T2 unaligned timer (in msecs). Access: Online. AC INI-Param: SS7Mtp2Parms_T2 |
| U32 acSS7MTP2AttribTimerT3 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.13 | Unsigned32 | read-create | Defines the SS7 MTP2 T3 timer aligned. Access: Online. AC INI-Param: SS7Mtp2Parms_T3 |
| U32 acSS7MTP2AttribTimerT4Emerg | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.15 | Unsigned32 | read-create | Defines the SS7 MTP2 T4e Emergency proving period timer (msec). Access: Online. AC INI-Param: SS7Mtp2Parms_T4e |
| U32 acSS7MTP2AttribTimerT4Normal | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.14 | Unsigned32 | read-create | Defines the SS7 MTP2 T4n Normal proving period timer. Access: Online. AC INI-Param: SS7Mtp2Parms_T4n |
| U32 acSS7MTP2AttribTimerT5 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.16 | Unsigned32 | read-create | Defines the SS7 MTP2 Sending SIB timer. Access: Online. AC INI-Param: SS7Mtp2Parms_T5 |
| U32 acSS7MTP2AttribTimerT6 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.17 | Unsigned32 | read-create | Defines the SS7 MTP2 Remote Congestion timer (in msec). Access: Online. AC INI-Param: SS7Mtp2Parms_T6 |
| U32 acSS7MTP2AttribTimerT7 | 1.3.6.1.4.1.5003.9.10.12.1.1.21.1.18 | Unsigned32 | read-create | Defines the SS7 MTP2 excessive delay of the ack timer (in msec). Access: Online. AC INI-Param: SS7Mtp2Parms_T7 |
| U32 acSS7MTP2M3bSlDiscardCongThreshold | 1.3.6.1.4.1.5003.9.10.12.1.1.1 | Unsigned32 | read-write | This parameter concerns feature that prevents uncontrolled increase of the MTP2 Transmit queue when the upper levels ignores the usual flow control mechanism. Any new SL_TX_MSU_RQ is discarded when the number of msu queued on the TB or RTB overtakes the threshold. Value 0, means that this feature is not activated. Access: Offline. AC INI-Param: SS7M3bSlDiscardCongThreshold |
| acSS7Nodes | 1.3.6.1.4.1.5003.9.10.12.1.4 | |||
| acSS7Redundancy | 1.3.6.1.4.1.5003.9.10.12.1.6 | |||
| U32 acSS7RedundancyBoardNum | 1.3.6.1.4.1.5003.9.10.12.1.6.3 | Unsigned32 | read-write | Defines the board number for the SS7 (Signaling System 7) MTP3 redundancy mode. Each board is allocated a unique number. All boards share a single redundancy table. Access: Offline. AC INI-Param: SS7MTP3RdcyBoardNum |
| INT acSS7RedundancyCrossLinkTraceAll | 1.3.6.1.4.1.5003.9.10.12.1.6.4 | INTEGER | read-write | When set via INI-file, activates trace output for all X-links (only when SS7 redundancy is configured). . Access: Instant. AC INI-Param: SS7M3BRdcyXlinkTraceAll |
| INT acSS7RedundancyCrossLinkTransferType | 1.3.6.1.4.1.5003.9.10.12.1.6.1 | INTEGER | read-write | Defines the cross-board connection media type for the MTP3 redundancy feature: 0 = M3BRDCY_CONN_TYPE_NONE 2 = M3BRDCY_CONN_TYPE_TCP. Access: Offline. AC INI-Param: SS7MTP3RdcyTransferType |
| U32 acSS7RedundancyKeepAliveInterval | 1.3.6.1.4.1.5003.9.10.12.1.6.9 | Unsigned32 | read-write | Defines redundancy X-link keep-alive interval in secs. (x-link between boards in Signaling System 7 (SS7) MTP3-User Adaptation Layer redundancy mode). 0 = no keep-alive mechanism is activated. . Access: Offline. AC INI-Param: SS7MTP3RdcyKeepAliveInterval |
| U32 acSS7RedundancyKeepAliveWindow | 1.3.6.1.4.1.5003.9.10.12.1.6.8 | Unsigned32 | read-write | Defines redundancy X-link keep-alive tolerance window. (x-link between boards in Signaling System 7 (SS7) MTP3-User Adaptation Layer redundancy mode). . Access: Offline. AC INI-Param: SS7MTP3RdcyKeepAliveWindow |
| INT acSS7RedundancyMode | 1.3.6.1.4.1.5003.9.10.12.1.6.2 | INTEGER | read-write | Defines the MTP3 Signaling redundancy mode: 0 = Disabled 1 = Enabled . Access: Offline. AC INI-Param: SS7MTP3RdcyMode |
| U32 acSS7RedundancyMTP3RdcyTblSyncInterval | 1.3.6.1.4.1.5003.9.10.12.1.6.5 | Unsigned32 | read-write | Defines the interval between SS7 tables automatic synchronizations, in minutes. 0 = no automatic synchronization is activated. . Access: Instant. AC INI-Param: N/A |
| INT acSS7RedundancySyncAllBoards | 1.3.6.1.4.1.5003.9.10.12.1.6.6 | INTEGER | read-write | Provide SYNC all boards command. Access: Instant. AC INI-Param: N/A |
| U32 acSS7RedundancySyncBoard | 1.3.6.1.4.1.5003.9.10.12.1.6.7 | Unsigned32 | read-write | Provide SYNC between this board and another specific board (parameter is the remote board number). Access: Instant. AC INI-Param: N/A |
| U32 acSS7RedundantSNAction | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.4 | Unsigned32 | read-create | Management field for ACTION. AC INI-Param: SS7_RDCYSN_ACTION |
| U32 acSS7RedundantSNActionRes | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.5 | Unsigned32 | read-only | Management field for ACTION RESULT. AC INI-Param: SS7_RDCYSN_ACTIONRES |
| U32 acSS7RedundantSNALCAPOPC | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.8 | Unsigned32 | read-create | Internal point-code of ALCAP instance on a given board. Access: Online. AC INI-Param: SS7_RDCYSN_ALCAP_OPC |
| U32 acSS7RedundantSNBoardIndex | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.1 | Unsigned32 | not-accessible | First index for a line: board number. AC INI-Param: SS7_RDCYSN_BOARD_INDEX |
| IP acSS7RedundantSNBoardIp | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.6 | IpAddress | read-create | IP address of the board. Access: Online. AC INI-Param: SS7_RDCYSN_BOARD_IP |
| acSS7RedundantSNEntry | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1 | not-accessible | ||
| U32 acSS7RedundantSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.2 | Unsigned32 | not-accessible | Second index for a line: SN number in the board. AC INI-Param: SS7_RDCYSN_SN_INDEX |
| U32 acSS7RedundantSNOPC | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.7 | Unsigned32 | read-create | Internal point-code of the SN (Signaling Node). Access: Online. AC INI-Param: SS7_RDCYSN_OPC |
| ROW acSS7RedundantSNRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.6.21.1.3 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: SS7_RDCYSN_ROWSTATUS |
| acSS7RedundantSNTable | 1.3.6.1.4.1.5003.9.10.12.1.6.21 | not-accessible | ||
| INT acSS7RouteSetAction | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.4 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_ROUTESET_ACTION |
| INT acSS7RouteSetActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.5 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_ROUTESET_ACTION_RESULT |
| INT acSS7RouteSetAdminState | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.7 | INTEGER | read-only | Administrative state of signalling route set. AC INI-Param: SS7_ROUTESET_ADMINISTRATIVE_STATE |
| U32 acSS7RouteSetDPC | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.9 | Unsigned32 | read-create | Destination Point-Code of singnalling routesetset. Access: Online. AC INI-Param: SS7_ROUTESET_DPC |
| acSS7RouteSetEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1 | not-accessible | ||
| U32 acSS7RouteSetIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.2 | Unsigned32 | not-accessible | Second Index Field for line: Signalling Routeset Number. AC INI-Param: SS7_ROUTESET_INDEX |
| STR acSS7RouteSetName | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.6 | SnmpAdminString | read-create | String name for ROUTESET Params. Access: Online. AC INI-Param: SS7_ROUTESET_NAME |
| INT acSS7RouteSetOperState | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.8 | INTEGER | read-only | Operational state of signalling route set. AC INI-Param: SS7_ROUTESET_OPERATIONAL_STATE |
| INT acSS7RouteSetRouteAction | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.5 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_ROUTESETROUTE_ACTION |
| INT acSS7RouteSetRouteActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.6 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_ROUTESETROUTE_ACTION_RESULT |
| acSS7RouteSetRouteEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1 | not-accessible | ||
| U32 acSS7RouteSetRouteInnerRouteIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.3 | Unsigned32 | not-accessible | Third Index Field for line: Inner Route Index in Signalling Routeset. AC INI-Param: SS7_ROUTESETROUTE_INNER_ROUTE_INDEX |
| U32 acSS7RouteSetRouteLinkSetNo | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.7 | Unsigned32 | read-create | Number of signalling linkset which is part of the Routeset. Access: Online. AC INI-Param: SS7_ROUTESETROUTE_LINKSET_NUMBER |
| U32 acSS7RouteSetRouteMask | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.10 | Unsigned32 | read-create | Mask for route within signaling routeset. Access: Online. AC INI-Param: SS7_ROUTESET_MASK |
| U32 acSS7RouteSetRoutePriority | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.8 | Unsigned32 | read-create | Priority of route within routeset. Access: Online. AC INI-Param: SS7_ROUTESETROUTE_PRIORITY |
| U32 acSS7RouteSetRouteRoutesetIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.2 | Unsigned32 | not-accessible | Second Index Field for line: Signalling Routeset Number. AC INI-Param: SS7_ROUTESETROUTE_ROUTESET_INDEX |
| ROW acSS7RouteSetRouteRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.4 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_ROUTESETROUTE_ROWSTATUS |
| U32 acSS7RouteSetRouteSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22.1.1 | Unsigned32 | not-accessible | First Index Field for line: Signalling Node Number. AC INI-Param: SS7_ROUTESETROUTE_SN_INDEX |
| acSS7RouteSetRouteTable | 1.3.6.1.4.1.5003.9.10.12.1.4.32.22 | not-accessible | ||
| ROW acSS7RouteSetRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.3 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_ROUTESET_ROWSTATUS |
| acSS7RouteSets | 1.3.6.1.4.1.5003.9.10.12.1.4.32 | |||
| U32 acSS7RouteSetSNIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21.1.1 | Unsigned32 | not-accessible | First Index Field for line: Signalling Node Number. AC INI-Param: SS7_ROUTESET_SN_INDEX |
| acSS7RouteSetTable | 1.3.6.1.4.1.5003.9.10.12.1.4.32.21 | not-accessible | ||
| INT acSS7SignalingNodeAction | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.3 | INTEGER | read-create | management Field for ACTIONS. AC INI-Param: SS7_SN_ACTION |
| INT acSS7SignalingNodeActionResult | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.4 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_SN_ACTION_RESULT |
| INT acSS7SignalingNodeAdminState | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.7 | INTEGER | read-only | Administrative state of singnalling node. AC INI-Param: SS7_SN_ADMINISTRATIVE_STATE |
| INT acSS7SignalingNodeAlcapApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.20 | INTEGER | read-create | Level 4 application that handles ALCAP traffic for this singnalling node. Access: Online. AC INI-Param: SS7_SN_ALCAP_APP |
| INT acSS7SignalingNodeBiccApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.23 | INTEGER | read-create | Level 4 application that handles BICC traffic for this signaling node. Access: Online. AC INI-Param: SS7_SN_BICC_APP |
| INT acSS7SignalingNodeBisupApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.19 | INTEGER | read-create | Level 4 application that handles BISUP traffic for this singnalling node. Access: Online. AC INI-Param: SS7_SN_BISUP_APP |
| acSS7SignalingNodeEntry | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1 | not-accessible | ||
| U32 acSS7SignalingNodeIndex | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.1 | Unsigned32 | not-accessible | AC INI-Param: SS7_SN_INDEX |
| INT acSS7SignalingNodeIsupApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.17 | INTEGER | read-create | Level 4 application that handles ISUP traffic for this singnalling node. Access: Online. AC INI-Param: SS7_SN_ISUP_APP |
| INT acSS7SignalingNodeMtcBusy | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.9 | INTEGER | read-only | Manual busy status of singnalling node. AC INI-Param: SS7_SN_MTC_BUSY_STATUS |
| STR acSS7SignalingNodeName | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.5 | SnmpAdminString | read-create | String name for SN Params. Access: Online. AC INI-Param: SS7_SN_NAME |
| INT acSS7SignalingNodeNwIndicator | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.11 | INTEGER | read-create | Network Indicator of singnalling node. Access: Online. AC INI-Param: SS7_SN_NI |
| U32 acSS7SignalingNodeOpc | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.14 | Unsigned32 | read-create | Origination (local) point-code of singnalling node. Access: Online. AC INI-Param: SS7_SN_OPC |
| INT acSS7SignalingNodeOperState | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.8 | INTEGER | read-only | Operational state of singnalling node. AC INI-Param: SS7_SN_OPERATIONAL_STATE |
| U32 acSS7SignalingNodeRdcyOpc | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.21 | Unsigned32 | read-only | Internal point-code of singnalling node - in case of SS7 shared point code. AC INI-Param: SS7_SN_RDCY_OPC |
| U32 acSS7SignalingNodeRouteSetCongestionWindow | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.15 | Unsigned32 | read-create | Routeset Congestion Size (messages) of singnalling node. Access: Online. AC INI-Param: SS7_SN_ROUTESET_CONGESTION_WINSIZE |
| ROW acSS7SignalingNodeRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.2 | RowStatus | read-create | ROWSTATUS Field for line. AC INI-Param: SS7_SN_ROWSTATUS |
| INT acSS7SignalingNodeSccpApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.18 | INTEGER | read-create | Level 4 application that handles SCCP traffic for this singnalling node. Access: Online. AC INI-Param: SS7_SN_SCCP_APP |
| INT acSS7SignalingNodeSpStp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.12 | INTEGER | read-create | Routing function of singnalling node. Access: Online. AC INI-Param: SS7_SN_SP_STP |
| acSS7SignalingNodeTable | 1.3.6.1.4.1.5003.9.10.12.1.4.21 | not-accessible | ||
| INT acSS7SignalingNodeTfc | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.13 | INTEGER | read-create | TFC function of singnalling node. Access: Online. AC INI-Param: SS7_SN_TFC |
| INT acSS7SignalingNodeTimersAction | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.3 | INTEGER | read-write | management Field for ACTIONS. AC INI-Param: SS7_SNTIMERS_ACTION |
| INT acSS7SignalingNodeTimersActionResult | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.4 | INTEGER | read-only | management Field for ACTIONS RESULT. AC INI-Param: SS7_SNTIMERS_ACTION_RESULT |
| acSS7SignalingNodeTimersEntry | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1 | not-accessible | ||
| INT acSS7SignalingNodeTimersIdx | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.16 | INTEGER | read-create | Index of SNTimers table used for this signaling node. Access: Online. AC INI-Param: SS7_SN_TIMERS_INDEX |
| U32 acSS7SignalingNodeTimersIndex | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: SS7_SNTIMERS_INDEX |
| INT acSS7SignalingNodeTimersIsUsed | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.2 | INTEGER | read-only | AC INI-Param: N/A |
| STR acSS7SignalingNodeTimersName | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.5 | SnmpAdminString | read-write | String name for SN timer-set. Access: Online. AC INI-Param: SS7_SNTIMERS_NAME |
| U32 acSS7SignalingNodeTimersT10 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.8 | Unsigned32 | read-write | Waiting to repeat signalling route set test message. Access: Online. AC INI-Param: SS7_SNTIMERS_T10 |
| U32 acSS7SignalingNodeTimersT11 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.9 | Unsigned32 | read-write | Transfer restricted timer. Access: Online. AC INI-Param: SS7_SNTIMERS_T11 |
| U32 acSS7SignalingNodeTimersT15 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.10 | Unsigned32 | read-write | Waiting to start signalling route set congestion test. Access: Online. AC INI-Param: SS7_SNTIMERS_T15 |
| U32 acSS7SignalingNodeTimersT16 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.11 | Unsigned32 | read-write | Waiting for route set congestion status update. Access: Online. AC INI-Param: SS7_SNTIMERS_T16 |
| U32 acSS7SignalingNodeTimersT18ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.12 | Unsigned32 | read-write | Timer within a signalling point whose MTP restarts for supervising link and link set activation as well as the receipt of routing information. Access: Online. AC INI-Param: SS7_SNTIMERS_T18_ITU |
| U32 acSS7SignalingNodeTimersT19ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.13 | Unsigned32 | read-write | Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR and TRA messages. Access: Online. AC INI-Param: SS7_SNTIMERS_T19_ITU |
| U32 acSS7SignalingNodeTimersT20ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.14 | Unsigned32 | read-write | Overall MTP restart timer at the signalling point whose MTP restarts. Access: Online. AC INI-Param: SS7_SNTIMERS_T20_ITU |
| U32 acSS7SignalingNodeTimersT21ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.15 | Unsigned32 | read-write | Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts. Access: Online. AC INI-Param: SS7_SNTIMERS_T21_ITU |
| U32 acSS7SignalingNodeTimersT22ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.17 | Unsigned32 | read-write | Timer at restarting SP waiting for signalling links to bacome available. Access: Online. AC INI-Param: SS7_SNTIMERS_T22_ANSI |
| U32 acSS7SignalingNodeTimersT23ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.18 | Unsigned32 | read-write | Timer at restarting SP, started after T22, waiting to receive all traffic restart allowed messages. Access: Online. AC INI-Param: SS7_SNTIMERS_T23_ANSI |
| U32 acSS7SignalingNodeTimersT24ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.19 | Unsigned32 | read-write | Timer at restarting SP with transfer function, started after T23, waiting to broadcast all traffic restart allowed messages. Access: Online. AC INI-Param: SS7_SNTIMERS_T24_ANSI |
| U32 acSS7SignalingNodeTimersT24ITU | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.16 | Unsigned32 | read-write | Stabilising timer after removal of local processor outage, used in LPO latching to RPO (national option). Access: Online. AC INI-Param: SS7_SNTIMERS_T24_ITU |
| U32 acSS7SignalingNodeTimersT25ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.20 | Unsigned32 | read-write | Timer at SP adjacent to restarting SP waiting for traffic restart allowed message. Access: Online. AC INI-Param: SS7_SNTIMERS_T25_ANSI |
| U32 acSS7SignalingNodeTimersT26ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.21 | Unsigned32 | read-write | Timer at restarting SP waiting to repeat traffic restart waiting message. Access: Online. AC INI-Param: SS7_SNTIMERS_T26_ANSI |
| U32 acSS7SignalingNodeTimersT27ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.22 | Unsigned32 | read-write | This parameter is used to define the minimum duration of unavailability for a full restart. Access: Online. AC INI-Param: SS7_SNTIMERS_T27_ANSI |
| U32 acSS7SignalingNodeTimersT28ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.23 | Unsigned32 | read-write | Timer at SP adjacent to restarting SP waiting for traffic restart waiting message. Access: Online. AC INI-Param: SS7_SNTIMERS_T28_ANSI |
| U32 acSS7SignalingNodeTimersT29ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.24 | Unsigned32 | read-write | Timer started when TRA sent in response to unexpected TRA or TRW. Access: Online. AC INI-Param: SS7_SNTIMERS_T29_ANSI |
| U32 acSS7SignalingNodeTimersT30ANSI | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.25 | Unsigned32 | read-write | Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW. Access: Online. AC INI-Param: SS7_SNTIMERS_T30_ANSI |
| U32 acSS7SignalingNodeTimersT6 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.6 | Unsigned32 | read-write | Delay to avoid message mis-sequencing on controlled rerouting. Access: Online. AC INI-Param: SS7_SNTIMERS_T6 |
| U32 acSS7SignalingNodeTimersT8 | 1.3.6.1.4.1.5003.9.10.12.1.2.21.1.7 | Unsigned32 | read-write | Transfer prohibited inhibition timer (transient solution). Access: Online. AC INI-Param: SS7_SNTIMERS_T8 |
| acSS7SignalingNodeTimersTable | 1.3.6.1.4.1.5003.9.10.12.1.2.21 | not-accessible | ||
| INT acSS7SignalingNodeTraceLevel | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.6 | INTEGER | read-create | Trace level of singnalling node (level 3). Access: Online. AC INI-Param: SS7_SN_TRACE_LEVEL |
| INT acSS7SignalingNodeTupApp | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.22 | INTEGER | read-create | Level 4 application that handles TUP traffic for this signaling node. Access: Online. AC INI-Param: SS7_SN_TUP_APP |
| INT acSS7SignalingNodeVariant | 1.3.6.1.4.1.5003.9.10.12.1.4.21.1.10 | INTEGER | read-create | Variant of singnalling node. Access: Online. AC INI-Param: SS7_SN_VARIANT |
| acSS7SigTran | 1.3.6.1.4.1.5003.9.10.12.1.5 | |||
| U32 acSS7SigTranIFGroupAckTimer | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.10 | Unsigned32 | read-create | T(ack) - wait timer for ASP_UP_ACK (in msecs) of interface group. Access: Online. AC INI-Param: SS7_SIG_T_ACK |
| INT acSS7SigTranIFGroupAction | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.3 | INTEGER | read-create | Management field for ACTION. AC INI-Param: SS7_SIG_IF_GR_ACTION |
| U32 acSS7SigTranIFGroupActionResult | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.4 | Unsigned32 | read-only | Management field for ACTION RESULT. AC INI-Param: SS7_SIG_IF_GR_ACTION_RESULT |
| U32 acSS7SigTranIFGroupBehavior | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.13 | Unsigned32 | read-create | Behavior bit of interface group. Access: Online. AC INI-Param: SS7_SIG_BEHAVIOUR |
| IP acSS7SigTranIFGroupDestIp | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.18 | IpAddress | read-create | Destination SCTP (Stream Control Transmission Protocol) IP address. Access: Online. AC INI-Param: SS7_DEST_IP |
| acSS7SigTranIFGroupEntry | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1 | not-accessible | ||
| U32 acSS7SigTranIFGroupHBTimer | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.11 | Unsigned32 | read-create | T(beat) - Heartbeat Timer (in msecs) of interface group. Access: Online. AC INI-Param: SS7_SIG_T_HB |
| U32 acSS7SigTranIFGroupId | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.5 | Unsigned32 | read-create | SS7 (Signaling System 7) SIGTRAN (Signaling Transport) Interface Group Id. Access: Online. AC INI-Param: SS7_IF_GR_ID |
| U32 acSS7SigTranIFGroupIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.1 | Unsigned32 | not-accessible | Index field for line. AC INI-Param: SS7_SIG_IF_GR_INDEX |
| U32 acSS7SigTranIFGroupMinAsp | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.12 | Unsigned32 | read-create | Minimal ASP (Application Server Process) number in interface group(minimum = 1). Access: Online. AC INI-Param: SS7_SIG_MIN_ASP |
| INT acSS7SigTranIFGroupNetwork | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.16 | INTEGER | read-create | Network variant of interface group. Access: Online. AC INI-Param: SS7_SIG_NETWORK |
| I32 acSS7SigTranIFGroupNetworkAppearance | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.24 | Integer32 | read-create | Network Appearance value for this interface group (AS). Access: Online. AC INI-Param: SS7_SIG_NETWORK_APPEARANCE |
| U32 acSS7SigTranIFGroupRdcyBoardNum | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.21 | Unsigned32 | read-create | This parameter is used to specify the SIGTRAN (Signaling Transport) group redundancy board number. Access: Online. AC INI-Param: RdcyBoardNum |
| U32 acSS7SigTranIFGroupRecovTimer | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.9 | Unsigned32 | read-create | T(r) - recovery timer (in msecs) of interface group. Access: Online. AC INI-Param: SS7_SIG_T_REC |
| I32 acSS7SigTranIFGroupRoutingContextIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.22 | Integer32 | read-create | Entry in Routing Context table, that contains the routing context rules for this interface group. Access: Online. AC INI-Param: SS7_SIG_RC_INDEX |
| I32 acSS7SigTranIFGroupRoutingContextValue | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.23 | Integer32 | read-create | Routing context value for this interface group (AS). Access: Online. AC INI-Param: SS7_SIG_RC_VALUE |
| ROW acSS7SigTranIFGroupRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: SS7_SIG_IF_GR_ROWSTATUS |
| U32 acSS7SigTranIFGroupSCTPDestPort | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.17 | Unsigned32 | read-create | Destination SCTP (Stream Control Transmission Protocol) port. Access: Online. AC INI-Param: SS7_DEST_SCTP_PORT |
| U32 acSS7SigTranIFGroupSCTPInst | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.14 | Unsigned32 | read-only | SCTP (Stream Control Transmission Protocol) instance of interface group. AC INI-Param: SS7_SCTP_INSTANCE |
| U32 acSS7SigTranIFGroupSCTPLocalPort | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.15 | Unsigned32 | read-create | Local SCTP (Stream Control Transmission Protocol) port of interface group. Access: Online. AC INI-Param: SS7_LOCAL_SCTP_PORT |
| U32 acSS7SigTranIFGroupSCTPMaxInbStreams | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.19 | Unsigned32 | read-create | Maximum inbound streams in interface group. Access: Online. AC INI-Param: SS7_MGC_MX_IN_STREAM |
| U32 acSS7SigTranIFGroupSCTPMaxOutbStreams | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.20 | Unsigned32 | read-create | Number of output streams required in interface group. Access: Online. AC INI-Param: SS7_MGC_NUM_OUT_STREAM |
| INT acSS7SigTranIFGroupSgMgc | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.6 | INTEGER | read-create | Interface Group function - Signaling Gateway (SG) or Media Gateway Controller (MGC). Access: Online. AC INI-Param: SS7_SIG_SG_MGC |
| INT acSS7SigTranIFGroupSignalingLayer | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.7 | INTEGER | read-create | UAL type of interface group: 0 = none 1 = iua 2 = m2ua 3 = m3ua 4 = m2tunnel 5 = V5ua 6 = dua 7=isdnTunnel. Access: Online. AC INI-Param: SS7_SIG_LAYER |
| acSS7SigTranIFGroupTable | 1.3.6.1.4.1.5003.9.10.12.1.5.21 | not-accessible | ||
| INT acSS7SigTranIFGroupTrafMode | 1.3.6.1.4.1.5003.9.10.12.1.5.21.1.8 | INTEGER | read-create | Traffic mode of interface group. Access: Online. AC INI-Param: SS7_SIG_TRAF_MODE |
| INT acSS7SigTranIFIDAction | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.3 | INTEGER | read-create | Management field for ACTION. AC INI-Param: SS7_SIG_IF_ID_ACTION |
| U32 acSS7SigTranIFIDActionResult | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.4 | Unsigned32 | read-only | Management field for ACTION RESULT. AC INI-Param: SS7_SIG_IF_ID_ACTION_RESULT |
| acSS7SigTranIFIDEntry | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1 | not-accessible | ||
| U32 acSS7SigTranIFIDIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.1 | Unsigned32 | not-accessible | Index field for line. AC INI-Param: SS7_SIG_IF_ID_INDEX |
| U32 acSS7SigTranIFIDM3UASpc | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.10 | Unsigned32 | read-create | This parameter is used to specify the SIGTRAN (Signaling Transport) M3UA (M3UA - SS7 MTP3-User Adaptation Layer) SPC. Access: Online. AC INI-Param: SS7_SIG_M3UA_SPC |
| I32 acSS7SigTranIFIDNai | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.9 | Integer32 | read-create | NAI of interface id. Access: Online. AC INI-Param: SS7_SIG_IF_ID_NAI |
| STR acSS7SigTranIFIDName | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.6 | SnmpAdminString | read-create | SS7 (Signaling System 7) SIGTRAN (Signaling Transport) interface ID name (text string). Access: Online. AC INI-Param: SS7_SIG_IF_ID_NAME |
| I32 acSS7SigTranIFIDOwnerGroup | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.7 | Integer32 | read-create | Owner group of interface id. Access: Online. AC INI-Param: SS7_SIG_IF_ID_OWNER_GROUP |
| ROW acSS7SigTranIFIDRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: SS7_SIG_IF_ID_ROWSTATUS |
| INT acSS7SigTranIFIDSignalingLayer | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.8 | INTEGER | read-create | UAL Type of interface id: 0 = none 1 = iua 2 = m2ua 4 = m2tunnel 5 = V5ua 6 = dua 7=isdnTunnel. Access: Online. AC INI-Param: SS7_SIG_IF_ID_LAYER |
| acSS7SigTranIFIDTable | 1.3.6.1.4.1.5003.9.10.12.1.5.22 | not-accessible | ||
| U32 acSS7SigTranIFIDValue | 1.3.6.1.4.1.5003.9.10.12.1.5.22.1.5 | Unsigned32 | read-create | SS7 (Signaling System 7) SIGTRAN (Signaling Transport) interface ID value. Access: Online. AC INI-Param: SS7_SIG_IF_ID_VALUE |
| INT acSS7SigTranM3UATrafficBehavior | 1.3.6.1.4.1.5003.9.10.12.1.5.1 | INTEGER | read-write | Defines the M3UA behavior when the SS7 links are up, but there is no association to the soft switch. 0 = NONE (no special behavior) 1 = DEACTIVATE (busy links) 2 = SIPO (LPO links). Access: Offline. AC INI-Param: SS7M3UATrafficBehavior |
| INT acSS7SigTranRoutingContextAction | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.4 | INTEGER | read-create | Management field for ACTIONS. AC INI-Param: RCAction |
| U32 acSS7SigTranRoutingContextActionResult | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.5 | Unsigned32 | read-only | RCActionRes. AC INI-Param: SS7_RC_ACTION_RES |
| acSS7SigTranRoutingContextEntry | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1 | not-accessible | ||
| U32 acSS7SigTranRoutingContextIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.1 | Unsigned32 | not-accessible | First index field for line. AC INI-Param: SS7_RC_INDEX |
| U32 acSS7SigTranRoutingContextInnerIndex | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.2 | Unsigned32 | not-accessible | Second index field for line. AC INI-Param: SS7_RC_INNER_INDEX |
| I32 acSS7SigTranRoutingContextOpc1 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.8 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context,First element of OPC list. Access: Online. AC INI-Param: SS7_RC_OPC1 |
| I32 acSS7SigTranRoutingContextOpc2 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.9 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context,Second element of OPC list. Access: Online. AC INI-Param: SS7_RC_OPC2 |
| I32 acSS7SigTranRoutingContextOpc3 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.10 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, Third element of OPC list. Access: Online. AC INI-Param: SS7_RC_OPC3 |
| I32 acSS7SigTranRoutingContextOpc4 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.11 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, Fourth element of OPC list. Access: Online. AC INI-Param: SS7_RC_OPC4 |
| ROW acSS7SigTranRoutingContextRowStatus | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.3 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: SS7_RC_ROW_STATUS |
| I32 acSS7SigTranRoutingContextSi1 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.12 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, First element of SI list. Access: Online. AC INI-Param: SS7_RC_SI1 |
| I32 acSS7SigTranRoutingContextSi2 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.13 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, Second element of SI list. Access: Online. AC INI-Param: SS7_RC_SI2 |
| I32 acSS7SigTranRoutingContextSi3 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.14 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, Third element of SI list. Access: Online. AC INI-Param: SS7_RC_SI3 |
| I32 acSS7SigTranRoutingContextSi4 | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.15 | Integer32 | read-create | This parameter is used to specify the M3UA Routing Context, Fourth element of SI list. Access: Online. AC INI-Param: SS7_RC_SI4 |
| U32 acSS7SigTranRoutingContextSnIdx | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.6 | Unsigned32 | read-create | This parameter is used to specify the M3UA Routing Context DPC SN-Index. Access: Online. AC INI-Param: SS7_RC_SN_INDEX |
| I32 acSS7SigTranRoutingContextSpc | 1.3.6.1.4.1.5003.9.10.12.1.5.24.1.7 | Integer32 | read-only | This parameter is used to specify the M3UA Routing Context DPC parameter. AC INI-Param: SS7_RC_SPC |
| acSS7SigTranRoutingContextTable | 1.3.6.1.4.1.5003.9.10.12.1.5.24 | not-accessible | ||
| acSS7Status | 1.3.6.1.4.1.5003.9.10.12.2 | |||
| acSS7Timers | 1.3.6.1.4.1.5003.9.10.12.1.2 |
RFC description
Configures and monitors SS7 telecommunications protocol (MTP2/MTP3) parameters on AudioCodes telephony gateways.
Start monitoring AudioCodes gateways (SS7 signaling) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.