WWP-LEOS-MULTICAST-FILTER-MIB

All MIBs › WWP-LEOS-MULTICAST-FILTER-MIB

Organization: Ciena, Inc

Last Updated: 2008-10-02

Category: Ciena LEOS Carrier Ethernet

Description: Manages Ciena LEOS multicast traffic filter rules and group-based forwarding policy configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-MULTICAST-FILTER-MIB?

WWP-LEOS-MULTICAST-FILTER-MIB is a vendor-specific Ciena (formerly World Wide Packets, WWP) MIB that manages multicast traffic filtering and IGMP snooping on LEOS/SAOS-based Ethernet access devices. It provides global controls (wwpLeosMcastConfigState to enable/disable multicast filtering, wwpLeosMcastSnoopState for global IGMP snooping, and stats-clear objects), a per-VLAN wwpLeosMcastFilterActivationTable tracking administrative and operational state plus row lifecycle, and a wwpLeosMcastFilterServerPortTable listing authorized ports allowed to act as trusted IGMP query sources. Later revisions added rapid-recovery mode and zero-source-IP general-query discard statistics for hardening IGMP snooping against malformed or spoofed traffic. Monitoring it helps operators confirm filtering/snooping is enabled where expected, that VLANs are correctly activated, and that only authorized server ports are trusted for IGMP queries — important for preventing unauthorized multicast injection or filter bypass. It's deployed on Ciena LEOS/SAOS access and aggregation switches, and administrators can download the WWP-LEOS-MULTICAST-FILTER-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-MULTICAST-FILTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches

Monitoring Examples

An operator polls wwpLeosMcastFilterActivationTable for a given wwpLeosMcastVlanId to compare wwpLeosMcastFilterAdminState against wwpLeosMcastFilterOperState; a VLAN administratively enabled but operationally showing disabled would indicate the multicast filter failed to activate, potentially allowing unfiltered multicast flooding on that VLAN.

What Can Be Monitored

global multicast filter and IGMP snoop enable state
per-VLAN filter admin/operational state and row status
authorized IGMP server port list
rapid-recovery mode setting
multicast statistics clear controls
zero-source-IP general-query discard counters

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosMcastFilterMIB	1.3.6.1.4.1.6141.2.60.7			This MIB specifies the managed objects for Multicast filter specific to the WWP Products.
wwpLeosMcastFilterMIBObjects	1.3.6.1.4.1.6141.2.60.7.1
wwpLeosMcastFilterConfig	1.3.6.1.4.1.6141.2.60.7.1.1
INT wwpLeosMcastConfigState	1.3.6.1.4.1.6141.2.60.7.1.1.1	INTEGER	read-write	Setting this object will enable or disable multicast globally.
wwpLeosMcastFilterActivationTable	1.3.6.1.4.1.6141.2.60.7.1.1.2		not-accessible	The (conceptual) table listing the vlans on which the multicast filter can be applied. This table is used to create and delete entries in the multicast table and also to administratively enable/disable. To configure the IGMP Snooping on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in this (wwpLeosMcastFilterActivationTable) table.
wwpLeosMcastFilterActivationEntry	1.3.6.1.4.1.6141.2.60.7.1.1.2.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastFilterActivationTable.
VLA wwpLeosMcastVlanId	1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1	VlanId	read-only	The VLAN for which this multicast filter can be enabled/disabled.
INT wwpLeosMcastFilterAdminState	1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2	INTEGER	read-write	Setting this object to enable will enable multicast on then given VLAN.
INT wwpLeosMcastFilterOperState	1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3	INTEGER	read-only	The object represents the operational state of multicast on the given VLAN.
ROW wwpLeosMcastFilterState	1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4	RowStatus	read-create	Setting this object to createandgo(4) will create an entry in the multicast table for the given VLAN and will enable multicast on that VLAN. Setting this object to destroy will delete the entry from the multicast table.
wwpLeosMcastFilterServerPortTable	1.3.6.1.4.1.6141.2.60.7.1.1.3		not-accessible	The (conceptual) table listing the authorized server ports.
wwpLeosMcastFilterServerPortEntry	1.3.6.1.4.1.6141.2.60.7.1.1.3.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastFilterServerPortTable.
I32 wwpLeosMcastServerPortId	1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1	Integer32	read-only	The server port from which the IGMP query messages can be received, and joins/leaves messages can be sent.
ROW wwpLeosMcastServerPortStatus	1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2	RowStatus	read-create	This object is used to add/delete server ports from the list of authorized server ports. To add a port to the authorized server port list, a user must set this object to 'createAndGo'.
wwpLeosMcastIgmpSnoopTable	1.3.6.1.4.1.6141.2.60.7.1.1.4		not-accessible	The (conceptual) table listing the configuration parameters for the IGMP snooping.
wwpLeosMcastIgmpSnoopEntry	1.3.6.1.4.1.6141.2.60.7.1.1.4.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastIgmpSnoopTable.
T/F wwpLeosMcastIgmpSnoopEnable	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1	TruthValue	read-write	For LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this object to 'true'. The Management station should define the router IP address range and the list of server ports before snooping is enabled. SAOS (6.x) does not support setting IGMP snooping per VLAN. Instead it should be enabled globally using the wwpLeosMcastSnoopState MIB object
I32 wwpLeosMcastIgmpSnoopRobustness	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2	Integer32	read-write	The number of replies to send for each multicast group.
I32 wwpLeosMcastIgmpSnoopProxyQueryInterval	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3	Integer32	read-write	The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default will be 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval.
I32 wwpLeosMcastIgmpSnoopProxyQueryReplyTmo	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4	Integer32	read-write	The amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet.
I32 wwpLeosMcastIgmpSnoopProxyQueryDelay	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5	Integer32	read-write	The amount of time to wait before sending the next group specific query downstream. General queries are sent one port at a time.
I32 wwpLeosMcastIgmpSnoopLingerTmo	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6	Integer32	read-write	This value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the stream after all the hosts have left the group. This can tune the system as to how long the router has to remove the stream from the subnet. The minimum value is 1 second, with no maximum value.
INT wwpLeosMcastIgmpQueryEngineState	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7	INTEGER	read-write	Setting this object to disable will enable query engine on a given VLAN. Setting it to enable will enable it.
IP wwpLeosMcastIgmpProxyQuerySrcIp	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8	IpAddress	read-write	Setting this object will set the source ip address for the VLAN.
I32 wwpLeosMcastIgmpRouterQueryInterval	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9	Integer32	read-write	Setting this object will set the router query interval for given VLAN.
I32 wwpLeosMcastIgmpMinResponseTime	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10	Integer32	read-write	Setting this object will set the minimum response time for given VLAN.
I32 wwpLeosMcastIgmpDefaultRouterPort	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11	Integer32	read-write	Setting this object will set the default router port for given VLAN.
INT wwpLeosMcastIgmpInquisitiveLeaveState	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12	INTEGER	read-write	Setting this object will set the IGMP inquisitive leave state for given VLAN.
I32 wwpLeosMcastIgmpLastMemberQueryInterval	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13	Integer32	read-write	Setting this object will set the last membership query interval for given VLAN.
I32 wwpLeosMcastIgmpPriority	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14	Integer32	read-write	Setting this object will set the priority if IGMP packets for this VLAN.
IP wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15	IpAddress	read-write	The first IP Address of the router IP Address range.
IP wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16	IpAddress	read-write	The last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.
I32 wwpLeosMcastIgmpSnoopActiveLingerTimeout	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17	Integer32	read-write	The object specifies the active linger timeout in seconds.
INT wwpLeosMcastIgmpSnoopServerTopology	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18	INTEGER	read-write	The object specifies the server topology.
INT wwpLeosMcastIgmpSnoopRapidRecoveryMode	1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19	INTEGER	read-write	Specifies whether the rapid recovery mode is set to on or off. If this object is set to ON then device will generate and accept query packets with src IP = 0 else in the OFF state, it would not.
wwpLeosMcastChannelStreamTable	1.3.6.1.4.1.6141.2.60.7.1.1.5		not-accessible	The (conceptual) table listing the configuration parameters for the multicast channel stream.
wwpLeosMcastChannelStreamEntry	1.3.6.1.4.1.6141.2.60.7.1.1.5.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastChannelStreamTable.
IP wwpLeosMcastChanelStreamStartGroupAddr	1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1	IpAddress	read-only	The first IP Address of the multicast IP Address range.
IP wwpLeosMcastChanelStreamEndGroupAddr	1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2	IpAddress	read-write	The last IP Address of the multicast IP address range. If range does not need to be specified then do not set this value.
ROW wwpLeosMcastChannelStreamStatus	1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3	RowStatus	read-create	This object is used to add/delete multicast groups to the channel stream. To add a multicast group to the channel stream, a user must set this object to 'createAndGo'. Device will not allow to create entry unless 'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' with the desired group address. If device cannot create entry for any of the IP addresses within the range then no entry will be created and an error will be returned.
wwpLeosMcastFilterConfigTable	1.3.6.1.4.1.6141.2.60.7.1.1.6		not-accessible	The (conceptual) table listing the vlans on which the UPF can be applied.
wwpLeosMcastFilterConfigEntry	1.3.6.1.4.1.6141.2.60.7.1.1.6.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastFilterConfigTable.
T/F wwpLeosMcastFilterUPFActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1	TruthValue	read-write	UPF can be enabled on this VLAN by setting this object to 'true'.
INT wwpLeosMcastUnresolvedAction	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2	INTEGER	read-write	Setting this object to 'flood' will cause the device to flood all the unresolved messages to all the ports in the VLAN. Setting this object to 'drop' will cause the device to drop all the unresolved messages. If an IGMP join is received with a matching multicast group address, the multicast stream will forward to the corresponding port.
INT wwpLeosMcastFilterWKMFLocalActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3	INTEGER	read-write	Setting the object to flood will enable flooding of local WKMF on a VLAN. Setting the object to drop will enable dropping of local WKMF on a VLAN. Multicast address belonging to this object is 224.0.0.x.
INT wwpLeosMcastFilterWKMFInternetActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4	INTEGER	read-write	Setting the object to flood will enable flooding of internet WKMF on a VLAN. Setting the object to drop will enable dropping of internet WKMF on a VLAN. Multicast address belonging to this object is 224.0.1.x.
INT wwpLeosMcastFilterWKMFAdhocActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5	INTEGER	read-write	Setting the object to flood will enable flooding of adhoc WKMF on a VLAN. Setting the object to drop will enable dropping of adhoc WKMF on a VLAN. Multicast address belonging to this object is 224.0.2.x to 224.0.255.x.
INT wwpLeosMcastFilterWKMFStMulticastActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6	INTEGER	read-write	Setting the object to flood will enable flooding of st-multicast WKMF on a VLAN. Setting the object to drop will enable dropping of st-multicast WKMF on a VLAN. Multicast address belonging to this object is 224.1.x.x.
INT wwpLeosMcastFilterWKMFSdpSapActivate	1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7	INTEGER	read-write	Setting the object to flood will enable flooding of sdp-sap WKMF on a VLAN. Setting the object to drop will enable dropping of sdp-sap WKMF on a VLAN. Multicast address belonging to this object is 224.2.x.x.
wwpLeosMcastChannelStreamExPortMemTable	1.3.6.1.4.1.6141.2.60.7.1.1.7		not-accessible	The (conceptual) table listing the excluded port list per VLAN for channel stream.
wwpLeosMcastChannelStreamExPortMemEntry	1.3.6.1.4.1.6141.2.60.7.1.1.7.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastChannelStreamExPortMemTable.
I32 wwpLeosMcastChannelStreamExPortId	1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1	Integer32	read-only	The port num to be excluded from channel stream.
ROW wwpLeosMcastChannelStreamExPortMemStatus	1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2	RowStatus	read-create	Setting this object to createAndGo will add wwpLeosMcastVlanId and wwpLeosMcastChannelStreamExPortId in the excluded port list of channel stream. Setting this to destroy will remove the wwpLeosMcastVlanId, wwpLeosMcastChannelStreamExPortId membership from excluded port list.
T/F wwpLeosMcastSnoopState	1.3.6.1.4.1.6141.2.60.7.1.1.8	TruthValue	read-write	Setting this object will enable or disable IGMP Snooping globally on SAOS (6.x). LEOS (4.x) does not support setting IGMP snooping at a global level. It should be enabled on a per VLAN bases using the wwpLeosMcastIgmpSnoopEnable MIB object
INT wwpLeosMcastGlobalStatsClear	1.3.6.1.4.1.6141.2.60.7.1.1.10	INTEGER	read-write	Setting this object to clear will clear the statistics for all the Multicast-Service filter entries. We cannot set the object to none. It is for display purpose only.
wwpLeosMcastFilterStatus	1.3.6.1.4.1.6141.2.60.7.1.2
wwpLeosMcastGroupTable	1.3.6.1.4.1.6141.2.60.7.1.2.1		not-accessible	The (conceptual) table listing all the multicast groups.
wwpLeosMcastGroupEntry	1.3.6.1.4.1.6141.2.60.7.1.2.1.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastGroupTable.
IP wwpLeosMcastGroupAddr	1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1	IpAddress	read-only	The multicast group IP address.
INT wwpLeosMcastState	1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2	INTEGER	read-only	The current state of the multicast stream.
INT wwpLeosMcastType	1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3	INTEGER	read-only	The type of the multicast stream.
INT wwpLeosMcastSource	1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4	INTEGER	read-only	The source for this multicast stream.
C32 wwpLeosMcastMemberCount	1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5	Counter32	read-only	The number of ports that joined the group.
wwpLeosMcastGroupMemberTable	1.3.6.1.4.1.6141.2.60.7.1.2.2		not-accessible	The (conceptual) table listing all the port members of the multicast groups.
wwpLeosMcastGroupMemberEntry	1.3.6.1.4.1.6141.2.60.7.1.2.2.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastGroupMemberTable.
I32 wwpLeosMcastPortId	1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1	Integer32	read-only	The router port from which the IGMP query messages are received, and joins/leaves messages are sent.
I32 wwpLeosMcastPortTagId	1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2	Integer32	read-only	The Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being used as a traditional Layer 2 device, then the value of this object should be same as wwpLeosMcastVlanId.
wwpLeosMcastFilterStats	1.3.6.1.4.1.6141.2.60.7.1.3
wwpLeosMcastFilterStatsTable	1.3.6.1.4.1.6141.2.60.7.1.3.1		not-accessible	The (conceptual) table listing the multicast statistics.
wwpLeosMcastFilterStatsEntry	1.3.6.1.4.1.6141.2.60.7.1.3.1.1		not-accessible	An entry (conceptual row) in the wwpLeosMcastFilterServerTable.
I32 wwpLeosMcastStaticGrpCount	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1	Integer32	read-only	The total number of static multicast groups.
I32 wwpLeosMcastDynamicGrpCount	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2	Integer32	read-only	The total number of dynamic mcast groups.
C32 wwpLeosMcastJoinMessages	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3	Counter32	read-only	The total number of join messages received.
C32 wwpLeosMcastLeaveMessages	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4	Counter32	read-only	The total number of leave messages received.
C32 wwpLeosMcastQueryMessages	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5	Counter32	read-only	The total number of queries received.
C32 wwpLeosMcastQueryDiscards	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6	Counter32	read-only	The total number of queries discarded.
C32 wwpLeosMcastQueryTimeouts	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7	Counter32	read-only	The total number of timeouts waiting for the router to send query.
C32 wwpLeosMcastUnknownPktType	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8	Counter32	read-only	The total number of unknown (unknown type ) IGMP packets received.
C32 wwpLeosMcastRouterDiscards	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9	Counter32	read-only	The total number of messages discarded by the router. This happens when join comes in from a router port.
C32 wwpLeosMcastHostDiscards	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10	Counter32	read-only	The total number of messages discarded by the host. This happens when a join/leave comes in a port, but no router port is established.
C32 wwpLeosMcastBadChecksum	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11	Counter32	read-only	The total number of packets received with bad IP checksum.
C32 wwpLeosMcastL2L3Mismatch	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12	Counter32	read-only	The total number of IGMP Layer2 / Layer 3 mismatch packets received.
C32 wwpLeosMcastTotalMembers	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13	Counter32	read-only	The total number of group members for all groups in the given VLAN.
C32 wwpLeosMcastLingerCount	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14	Counter32	read-only	The total number of groups in linger state.
MAC wwpLeosMcastRouterSrcMacAddr	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15	MacAddress	read-only	Specifies the router's MAC address.
IP wwpLeosMcastRouterSrcIpAddr	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16	IpAddress	read-only	Specifies the router's IP address.
I32 wwpLeosMcastRouterPortId	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17	Integer32	read-only	Specifies the port from where router queries are coming.
I32 wwpLeosMcastReportSendPortId	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18	Integer32	read-only	The new value is the port number of the port where IGMP reports will be sent. Not always the same as the router port.
INT wwpLeosMcastStatsClear	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19	INTEGER	read-write	Setting this object to clear will clear the statistics for only the associated VlanId. We cannot set this object to none, it is for display purpose only.
C32 wwpLeosMcastStatsQuerySrcIpZeroDiscard	1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20	Counter32	read-only	Specifies the number of Queries discarded with Zero source IP in them
wwpLeosMcastFilterMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.7.2
wwpLeosMcastFilterMIBNotifications	1.3.6.1.4.1.6141.2.60.7.2.0
NTF wwpLeosMcastAddrOverlapNotification	1.3.6.1.4.1.6141.2.60.7.2.0.1			A wwpLeosMcastAddrOverlapNotification is sent whenever several multicast IP addresses overlap (matches the same L2 address).
wwpLeosMcastFilterMIBConformance	1.3.6.1.4.1.6141.2.60.7.3
wwpLeosMcastFilterMIBCompliances	1.3.6.1.4.1.6141.2.60.7.3.1
wwpLeosMcastFilterMIBGroups	1.3.6.1.4.1.6141.2.60.7.3.2

RFC description

Ciena multicast filter management with IGMP snooping and rapid recovery for VLAN services.

Start monitoring Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches (multicast-filter/IGMP-snooping VLAN activation status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-MULTICAST-FILTER-MIB

What Is WWP-LEOS-MULTICAST-FILTER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description