All MIBs › WWP-LEOS-MULTICAST-FILTER-MIB › wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr
wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr
Module: WWP-LEOS-MULTICAST-FILTER-MIB
OID (symbolic): WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr
OID (numeric): 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr.
What is wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr?
This configures the last IP address of the trusted router IP address range for this VLAN; per the MIB's own description, leaving the range undefined causes all leave/join messages to be forwarded to the router even from non-router sources, while defining it enables filtering, and the default should match the start address. An admin defines both ends of this range to restrict which sources the switch will trust as multicast routers on the VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16 snmpwalk -v2c -c public <target> WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16.1 snmpget -v2c -c public <target> WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16.1 a <value>
Start monitoring Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches (multicast-filter/IGMP-snooping VLAN activation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches (multicast-filter/IGMP-snooping VLAN activation status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.7 | wwpLeosMcastFilterMIB | WWP-LEOS-MULTICAST-FILTER-MIB |
| 1.3.6.1.4.1.6141.2.60.7.1 | wwpLeosMcastFilterMIBObjects | WWP-LEOS-MULTICAST-FILTER-MIB |
| 1.3.6.1.4.1.6141.2.60.7.1.1 | wwpLeosMcastFilterConfig | WWP-LEOS-MULTICAST-FILTER-MIB |
| 1.3.6.1.4.1.6141.2.60.7.1.1.4 | wwpLeosMcastIgmpSnoopTable | WWP-LEOS-MULTICAST-FILTER-MIB |
| 1.3.6.1.4.1.6141.2.60.7.1.1.4.1 | wwpLeosMcastIgmpSnoopEntry | WWP-LEOS-MULTICAST-FILTER-MIB |
| 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16 | wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr | WWP-LEOS-MULTICAST-FILTER-MIB |