WWP-LEOS-MULTICAST-FILTER-MIB :: wwpLeosMcastIgmpSnoopProxyQueryReplyTmo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWWP-LEOS-MULTICAST-FILTER-MIBwwpLeosMcastIgmpSnoopProxyQueryReplyTmo

wwpLeosMcastIgmpSnoopProxyQueryReplyTmo

Module: WWP-LEOS-MULTICAST-FILTER-MIB

OID (symbolic): WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopProxyQueryReplyTmo

OID (numeric): 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet.

What is wwpLeosMcastIgmpSnoopProxyQueryReplyTmo?

This configures, in seconds (10-255), how long the switch waits to receive a membership report after sending a query, a value that per the MIB's own description goes directly into the outgoing query packet. An admin tunes this to match expected host response times on the VLAN, balancing faster leave detection against false negatives on a busy network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4
snmpwalk -v2c -c public <target> WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopProxyQueryReplyTmo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4.1
snmpget -v2c -c public <target> WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopProxyQueryReplyTmo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4.1 i <value>

Start monitoring Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches (multicast-filter/IGMP-snooping VLAN activation status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-MULTICAST-FILTER-MIB::wwpLeosMcastIgmpSnoopProxyQueryReplyTmo OID value, configure state conditions and alerts, and monitor any Ciena (World Wide Packets) LEOS/SAOS Ethernet access and aggregation switches (multicast-filter/IGMP-snooping VLAN activation status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.7wwpLeosMcastFilterMIBWWP-LEOS-MULTICAST-FILTER-MIB
1.3.6.1.4.1.6141.2.60.7.1wwpLeosMcastFilterMIBObjectsWWP-LEOS-MULTICAST-FILTER-MIB
1.3.6.1.4.1.6141.2.60.7.1.1wwpLeosMcastFilterConfigWWP-LEOS-MULTICAST-FILTER-MIB
1.3.6.1.4.1.6141.2.60.7.1.1.4wwpLeosMcastIgmpSnoopTableWWP-LEOS-MULTICAST-FILTER-MIB
1.3.6.1.4.1.6141.2.60.7.1.1.4.1wwpLeosMcastIgmpSnoopEntryWWP-LEOS-MULTICAST-FILTER-MIB
1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4wwpLeosMcastIgmpSnoopProxyQueryReplyTmoWWP-LEOS-MULTICAST-FILTER-MIB