All MIBs › LaserJet-Series8000-MIB › file_system_max_open_files
file_system_max_open_files
Module: LaserJet-Series8000-MIB
OID (symbolic): LaserJet-Series8000-MIB::file_system_max_open_files
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates the number of open files a personality (e.g. PCL or PostScript) is guaranteed to be able to open before the file system runs out of file handles. After writing this object, the printer must be rebooted (powercycled) before the change takes effect. This object supports any value between 32 - 512 inclusive. If a value Less then 32 then it snaps to 32 if greater then 512 it snaps to 512. The factory default value is dependent on the amount of installed RAM. The default value of 32 is when Memory <= 4MB, 128 is if the memory is > 4MB. Performing a cold reset sets this object back to the factory default value. Returns
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2 snmpwalk -v2c -c public <target> LaserJet-Series8000-MIB::file_system_max_open_files
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2.1 snmpget -v2c -c public <target> LaserJet-Series8000-MIB::file_system_max_open_files.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2.1 i <value>
Start monitoring HP LaserJet 8000 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series8000-MIB::file_system_max_open_files OID value, configure state conditions and alerts, and monitor any HP LaserJet 8000 series printer from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | system | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | file_system | CLJ8550-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1 | settings_file_system | CLJ8550-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2 | file_system_max_open_files | LaserJet-Series8000-MIB |