LSIRAID-IDE-MIB

All MIBs › LSIRAID-IDE-MIB

Category: Domain: Storage

Description: LSI Logic RAID IDE controller MIB providing SNMP objects for monitoring disk array status, drive health, and RAID configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LSIRAID-IDE-MIB?

This is an LSI Logic (later LSI/Avago) private enterprise MIB for managing IDE/ATA-based RAID controllers, part of the broader family of LSI MegaRAID management MIBs. It exposes agent identification data along with per-controller inventory objects describing the controller model, BIOS version, firmware/driver revision, and controller identifiers. Its core monitoring value is hardware health of the storage subsystem: BIOS and driver version tracking helps confirm firmware consistency across a server fleet, and controller identity/index objects allow an agent to enumerate every RAID card installed and correlate it with array and drive status reported elsewhere in the same MIB family. It is a self-contained vendor MIB with no dependency on standard IETF storage MIBs, functioning instead alongside LSI's own RAID/array/drive sub-MIBs. It is typically deployed on servers with LSI IDE RAID controllers where storage administrators need to verify controller firmware levels and detect configuration drift or controller failures. Engineers can download the LSIRAID-IDE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LSIRAID-IDE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

LSI Logic IDE RAID controller
server with LSI RAID storage adapter

Monitoring Examples

A monitoring script could walk contIndex/contControllerId across all installed adapters and cross-reference contModel and contBIOSVersion to flag any controller running an outdated BIOS relative to the fleet baseline. contDriverVersion combined with agentModuleVersion helps confirm the SNMP agent and OS driver are compatible after an OS patch. contRevision changes between polls can indicate an unexpected hardware swap or firmware flash on a production server.

What Can Be Monitored

RAID controller model and identity
controller BIOS version
controller driver version
controller firmware revision
SNMP agent module version

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Gauge
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
lsi	1.3.6.1.4.1.674
megaIDE	1.3.6.1.4.1.674.3
ide	1.3.6.1.4.1.674.3.2
NTF trRebuildStarted	1.3.6.1.4.1.674.3.2.0.200			Rebuild was started
NTF trRebuildStoped	1.3.6.1.4.1.674.3.2.0.201			Rebuild was finished
NTF trConsistencyStarted	1.3.6.1.4.1.674.3.2.0.202			Consistency Check was started
NTF trConsistencyStopped	1.3.6.1.4.1.674.3.2.0.203			Consistency check was finished
NTF trPDriveStatusChanged	1.3.6.1.4.1.674.3.2.0.204			Drive status has been changed
NTF trLDriveStatusChanged	1.3.6.1.4.1.674.3.2.0.205			Logical Drive status has been changed
NTF trDriveNewError	1.3.6.1.4.1.674.3.2.0.206			Physical drive media error has been found
NTF trDriveSMARTError	1.3.6.1.4.1.674.3.2.0.207			S.M.A.R.T. error found
ideControllers	1.3.6.1.4.1.674.3.2.1
GAU contNumber	1.3.6.1.4.1.674.3.2.1.1	Gauge	read-only	The present number of rows in the Controllers table.
contTable	1.3.6.1.4.1.674.3.2.1.2		not-accessible	Each row describes a MegaRAID IDE Controller Information.
contEntry	1.3.6.1.4.1.674.3.2.1.2.1		not-accessible
INT contIndex	1.3.6.1.4.1.674.3.2.1.2.1.1	INTEGER	read-only	Index of Controller Information entry.
INT contControllerId	1.3.6.1.4.1.674.3.2.1.2.1.2	INTEGER	read-only	MegaRAID IDE Controller Id.
STR contModel	1.3.6.1.4.1.674.3.2.1.2.1.3	DisplayString	read-only	Model name.
STR contBIOSVersion	1.3.6.1.4.1.674.3.2.1.2.1.4	DisplayString	read-only	BIOS version.
STR contRevision	1.3.6.1.4.1.674.3.2.1.2.1.5	DisplayString	read-only	MegaRAID IDE Revision.
STR contDriverVersion	1.3.6.1.4.1.674.3.2.1.2.1.6	DisplayString	read-only	MegaRAID IDE driver version
STR contBaseAddress	1.3.6.1.4.1.674.3.2.1.2.1.7	DisplayString	read-only	Controller Bus Master Base address.
STR contInterrupt	1.3.6.1.4.1.674.3.2.1.2.1.8	DisplayString	read-only	Controller interupt.
INT contNumberOfChannels	1.3.6.1.4.1.674.3.2.1.2.1.9	INTEGER	read-only	Available IDE channels.
INT contBuzzer	1.3.6.1.4.1.674.3.2.1.2.1.10	INTEGER	read-write	Buzzer State.
INT contRebRate	1.3.6.1.4.1.674.3.2.1.2.1.11	INTEGER	read-write	Rebuild rate of physical drive(s)
INT contBIOSState	1.3.6.1.4.1.674.3.2.1.2.1.12	INTEGER	read-write	Controller BIOS State
INT contStopOnError	1.3.6.1.4.1.674.3.2.1.2.1.13	INTEGER	read-write	Stop On Error
INT contNewDevConf	1.3.6.1.4.1.674.3.2.1.2.1.14	INTEGER	read-write	How new device(s) will configured.
INT contFastInit	1.3.6.1.4.1.674.3.2.1.2.1.15	INTEGER	read-write	How initialization will performed FAST/Complete.
INT contCCState	1.3.6.1.4.1.674.3.2.1.2.1.16	INTEGER	read-write	Consistency Check Options
INT contAutoRebuild	1.3.6.1.4.1.674.3.2.1.2.1.17	INTEGER	read-write	In case of drive failure Rebuild will be started Automatically.
INT contBootLD	1.3.6.1.4.1.674.3.2.1.2.1.18	INTEGER	read-write	Boot Logical drive
INT contPDSmartStatus	1.3.6.1.4.1.674.3.2.1.2.1.19	INTEGER	read-write	SMART status for drive(s) under this controller
INT contPDSmartPollInterval	1.3.6.1.4.1.674.3.2.1.2.1.20	INTEGER	read-write	SMART polling interval in minutes
ideLogicalDrives	1.3.6.1.4.1.674.3.2.2
GAU ldNumber	1.3.6.1.4.1.674.3.2.2.1	Gauge	read-only	The present number of rows in the LD table.
ldTable	1.3.6.1.4.1.674.3.2.2.2		not-accessible	Each row describes a LD Information.
ldEntry	1.3.6.1.4.1.674.3.2.2.2.1		not-accessible
INT ldIndex	1.3.6.1.4.1.674.3.2.2.2.1.1	INTEGER	read-only	Index of LD Information entry.
INT ldID	1.3.6.1.4.1.674.3.2.2.2.1.2	INTEGER	read-only	Logical drive ID.
STR ldName	1.3.6.1.4.1.674.3.2.2.2.1.3	DisplayString	read-only	LD Name
STR ldMode	1.3.6.1.4.1.674.3.2.2.2.1.4	DisplayString	read-only	LD mode.
INT ldStatus	1.3.6.1.4.1.674.3.2.2.2.1.5	INTEGER	read-only	LD status.
STR ldStripeSize	1.3.6.1.4.1.674.3.2.2.2.1.6	DisplayString	read-only	LD Stripe size.
STR ldCapacity	1.3.6.1.4.1.674.3.2.2.2.1.7	DisplayString	read-only	LD size.
STR ldDriveLetters	1.3.6.1.4.1.674.3.2.2.2.1.8	DisplayString	read-only	Drive letters for particular LD.
INT ldNumStripes	1.3.6.1.4.1.674.3.2.2.2.1.9	INTEGER	read-only	No of stripes for this logical drive
INT ldSpans	1.3.6.1.4.1.674.3.2.2.2.1.10	INTEGER	read-only	No of span(s) for this logical drive
STR ldStartLBA	1.3.6.1.4.1.674.3.2.2.2.1.11	DisplayString	read-only	Start LBA of this LD
STR ldPDriveID	1.3.6.1.4.1.674.3.2.2.2.1.12	DisplayString	read-only	Physical drive ID(s) which are part of this LD
INT ldOperation	1.3.6.1.4.1.674.3.2.2.2.1.13	INTEGER	read-only	Operation performing on this logical drive.
INT ldOpProgress	1.3.6.1.4.1.674.3.2.2.2.1.14	INTEGER	read-only	Progress percentage for the operation.
idePhysicalDrives	1.3.6.1.4.1.674.3.2.3
GAU pdrNumber	1.3.6.1.4.1.674.3.2.3.1	Gauge	read-only	The present number of rows in the Physical Drive table.
pdrTable	1.3.6.1.4.1.674.3.2.3.2		not-accessible	Each row describes a Physical Drive Information.
pdrEntry	1.3.6.1.4.1.674.3.2.3.2.1		not-accessible
INT pdrIndex	1.3.6.1.4.1.674.3.2.3.2.1.1	INTEGER	read-only	Index of Drives Information entry.
INT pdrDriveId	1.3.6.1.4.1.674.3.2.3.2.1.2	INTEGER	read-only	Drive Id.
STR pdrConnection	1.3.6.1.4.1.674.3.2.3.2.1.3	DisplayString	read-only	Physical Drive connection.
STR pdrModel	1.3.6.1.4.1.674.3.2.3.2.1.4	DisplayString	read-only	Physical drive model.
INT pdrStatus	1.3.6.1.4.1.674.3.2.3.2.1.5	INTEGER	read-only	Drive status.
INT pdrErrorCount	1.3.6.1.4.1.674.3.2.3.2.1.6	INTEGER	read-only	Media errors count in drive.
STR pdrCapacity	1.3.6.1.4.1.674.3.2.3.2.1.7	DisplayString	read-only	Physical drive size.
INT pdrTransferMode	1.3.6.1.4.1.674.3.2.3.2.1.8	INTEGER	read-write	Transfer mode.
STR pdrSerialNumber	1.3.6.1.4.1.674.3.2.3.2.1.9	DisplayString	read-only	Drive's serial number.
INT pdrContID	1.3.6.1.4.1.674.3.2.3.2.1.10	INTEGER	read-only	Controller ID where this Device is present.
STR pdrFirmware	1.3.6.1.4.1.674.3.2.3.2.1.11	DisplayString	read-only	Drive's Firmware.
INT pdOpProgress	1.3.6.1.4.1.674.3.2.3.2.1.12	INTEGER	read-only	Progress percentage , if drive status is rebuilding
INT pdWriteCache	1.3.6.1.4.1.674.3.2.3.2.1.13	INTEGER	read-write	Write cache option
INT pdReadAhead	1.3.6.1.4.1.674.3.2.3.2.1.14	INTEGER	read-write	Read Ahead option
INT pdrSmartStatus	1.3.6.1.4.1.674.3.2.3.2.1.15	INTEGER	read-only	Is this device S.M.A.R.T. compiliant?
versionInfo	1.3.6.1.4.1.674.3.2.4
STR mibVersion	1.3.6.1.4.1.674.3.2.4.1	DisplayString	read-only	The MIB version in xx.yy.zz format
STR agentModuleName	1.3.6.1.4.1.674.3.2.4.2	DisplayString	read-only	Module Name
STR agentModuleVersion	1.3.6.1.4.1.674.3.2.4.3	DisplayString	read-only	Module Version
STR companyName	1.3.6.1.4.1.674.3.2.4.4	DisplayString	read-only	Company Name
STR releaseDate	1.3.6.1.4.1.674.3.2.4.5	DisplayString	read-only	Release Date
ideTrapInfo	1.3.6.1.4.1.674.3.2.5
INT rtContID	1.3.6.1.4.1.674.3.2.5.1	INTEGER	read-only	Controller ID for which Trap is generated.
INT rtLDriveID	1.3.6.1.4.1.674.3.2.5.2	INTEGER	read-only	Logical Drive Number for which Trap is generated.
INT rtPDrvID	1.3.6.1.4.1.674.3.2.5.3	INTEGER	read-only	Device ID of the Physical Drive for which Trap is Generated.
INT rtPDriveStatus	1.3.6.1.4.1.674.3.2.5.4	INTEGER	not-accessible	Physical drive status.
INT rtLDriveStatus	1.3.6.1.4.1.674.3.2.5.5	INTEGER	not-accessible	Logical drive status.
INT rtLDrvOPStatus	1.3.6.1.4.1.674.3.2.5.6	INTEGER	not-accessible	Last operation status for Logical drive.
INT rtDriveErrorType	1.3.6.1.4.1.674.3.2.5.7	INTEGER	not-accessible	Physical drive error types.

RFC description

LSI MegaRAID IDE/SATA controller environmental monitoring and management MIB.

Start monitoring LSI RAID controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LSIRAID-IDE-MIB

What Is LSIRAID-IDE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description