LSIRAID-IDE-MIB :: contIndex

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › LSIRAID-IDE-MIB › contIndex

contIndex

Module: LSIRAID-IDE-MIB

OID (symbolic): LSIRAID-IDE-MIB::contIndex

OID (numeric): 1.3.6.1.4.1.674.3.2.1.2.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Index of Controller Information entry.

What is contIndex?

This is the index value identifying one row in the Controllers table, corresponding to one physical MegaRAID IDE controller in the system. Management software uses it to walk contTable and correlate all the per-controller settings (BIOS version, buzzer, rebuild rate, etc.) that belong to the same card.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.1
snmpwalk -v2c -c public <target> LSIRAID-IDE-MIB::contIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.1.1
snmpget -v2c -c public <target> LSIRAID-IDE-MIB::contIndex.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> contIndex.1

Start monitoring LSI RAID controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LSIRAID-IDE-MIB::contIndex OID value, configure state conditions and alerts, and monitor any LSI RAID controllers from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.3megaIDELSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2ideLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1ideControllersLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2contTableLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2.1contEntryLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2.1.1contIndexLSIRAID-IDE-MIB