LSIRAID-IDE-MIB :: contNewDevConf

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › LSIRAID-IDE-MIB › contNewDevConf

contNewDevConf

Module: LSIRAID-IDE-MIB

OID (symbolic): LSIRAID-IDE-MIB::contNewDevConf

OID (numeric): 1.3.6.1.4.1.674.3.2.1.2.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: How new device(s) will configured.

What is contNewDevConf?

This sets how newly detected drives are handled: forceToCtrlM(1) requires the admin to configure them manually through the controller's BIOS utility, while autoConfiguration(2) lets the controller configure them automatically. An admin managing many identical servers would prefer autoConfiguration to avoid manual steps per box.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.14
snmpwalk -v2c -c public <target> LSIRAID-IDE-MIB::contNewDevConf

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.14.1
snmpget -v2c -c public <target> LSIRAID-IDE-MIB::contNewDevConf.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.3.2.1.2.1.14.1 i <value>

Start monitoring LSI RAID controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LSIRAID-IDE-MIB::contNewDevConf OID value, configure state conditions and alerts, and monitor any LSI RAID controllers from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.3megaIDELSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2ideLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1ideControllersLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2contTableLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2.1contEntryLSIRAID-IDE-MIB
1.3.6.1.4.1.674.3.2.1.2.1.14contNewDevConfLSIRAID-IDE-MIB