All MIBs › LSIRAID-IDE-MIB › contPDSmartStatus
contPDSmartStatus
Module: LSIRAID-IDE-MIB
OID (symbolic): LSIRAID-IDE-MIB::contPDSmartStatus
OID (numeric): 1.3.6.1.4.1.674.3.2.1.2.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: SMART status for drive(s) under this controller
What is contPDSmartStatus?
This enables(1) or disables(2) S.M.A.R.T. monitoring for the physical drives under this controller. An admin leaves this enabled so the controller can raise early warnings (like trDriveSMARTError traps) before a drive actually fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.19 snmpwalk -v2c -c public <target> LSIRAID-IDE-MIB::contPDSmartStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.3.2.1.2.1.19.1 snmpget -v2c -c public <target> LSIRAID-IDE-MIB::contPDSmartStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.3.2.1.2.1.19.1 i <value>
Start monitoring LSI RAID controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LSIRAID-IDE-MIB::contPDSmartStatus OID value, configure state conditions and alerts, and monitor any LSI RAID controllers from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.3 | megaIDE | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2 | ide | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.1 | ideControllers | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.1.2 | contTable | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.1.2.1 | contEntry | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.1.2.1.19 | contPDSmartStatus | LSIRAID-IDE-MIB |