All MIBs › LSIRAID-IDE-MIB › pdrTransferMode
pdrTransferMode
Module: LSIRAID-IDE-MIB
OID (symbolic): LSIRAID-IDE-MIB::pdrTransferMode
OID (numeric): 1.3.6.1.4.1.674.3.2.3.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Transfer mode.
What is pdrTransferMode?
This sets or reports the ATA transfer mode (e.g. udmaMode5, sata-2) used to communicate with this physical drive. An admin troubleshooting slow or unreliable drive I/O might check whether the negotiated transfer mode is lower than expected, which can indicate a cabling or compatibility issue.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.3.2.3.2.1.8 snmpwalk -v2c -c public <target> LSIRAID-IDE-MIB::pdrTransferMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.3.2.3.2.1.8.1 snmpget -v2c -c public <target> LSIRAID-IDE-MIB::pdrTransferMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.3.2.3.2.1.8.1 i <value>
Start monitoring LSI RAID controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LSIRAID-IDE-MIB::pdrTransferMode OID value, configure state conditions and alerts, and monitor any LSI RAID controllers from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.3 | megaIDE | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2 | ide | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.3 | idePhysicalDrives | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.3.2 | pdrTable | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.3.2.1 | pdrEntry | LSIRAID-IDE-MIB |
| 1.3.6.1.4.1.674.3.2.3.2.1.8 | pdrTransferMode | LSIRAID-IDE-MIB |