F3-PBB-MIB

All MIBs › F3-PBB-MIB

Organization: ADVA Optical Networking

Last Updated: 2012-10-08

Category: Domain: Telco/Transport, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Provider Backbone Bridging (PBB/802.1ah) service configuration and monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-PBB-MIB?

This ADVA F3 platform MIB covers Provider Backbone Bridging (PBB, IEEE 802.1ah) service configuration on FSP150CM/CC carrier Ethernet devices, which use MAC-in-MAC encapsulation to scale service provider backbone networks. It exposes per-port configuration for both access-side and network-side PBB ports, including backbone MAC address assignment and I-tag loopback test masks for each port. Its monitoring emphasis is on validating PBB service configuration and running loopback diagnostics — f3PbbEthernetNetPortBackboneMacAddress confirms the backbone MAC identity used for MAC-in-MAC tunneling, while the ITagLoopback objects let an operator run in-service loopback tests on specific I-tag service instances to confirm connectivity. It is organized alongside sibling F3 MIBs (F3-PWE3, F3-POPM, F3-JDSU) under the same ADVA FSP150 platform tree rather than depending on external IETF MIBs, since 802.1ah PBB has no standard IETF MIB. It is deployed in service provider backbone/aggregation networks using ADVA FSP150CM/CC devices to deliver scalable Ethernet services over a PBB core. Engineers can download the F3-PBB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-PBB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet device (PBB/802.1ah backbone service)

Monitoring Examples

An operator would inspect f3PbbEthernetAccPortTable/Entry and f3PbbEthernetNetPortTable/Entry to check f3PbbEthernetNetPortBackboneMacAddress assigned to each network-facing PBB port, confirming correct MAC-in-MAC backbone addressing for the service. Setting f3PbbEthernetAccPortITagLoopback1/2/3 (gated by f3PbbEthernetAccPortITagLoopbackMask) triggers an I-tag-specific loopback test, letting the operator verify that a particular backbone service instance is passing traffic correctly without needing to loop the whole physical port.

What Can Be Monitored

access port PBB configuration
network port backbone MAC address
I-tag loopback test state (per access/network port)
PBB service loopback mask

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

PerfCounter64

From CM-FACILITY-MIB

FlowTagControl
cmEthernetAccPortEntry	OBJECT-TYPE
cmEthernetNetPortEntry	OBJECT-TYPE
cmFlowEntry	OBJECT-TYPE

From CM-IP-MIB

ipManagementTunnelEntry

OBJECT-TYPE

From CM-PERFORMANCE-MIB

cmEthernetNetPortHistoryEntry	OBJECT-TYPE
cmEthernetNetPortStatsEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3PBBMIB	1.3.6.1.4.1.2544.1.12.21			This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3PBBConfigObjects	1.3.6.1.4.1.2544.1.12.21.1
f3PbbEthernetAccPortTable	1.3.6.1.4.1.2544.1.12.21.1.1		not-accessible	A list of entries corresponding to PBB function on the net port
f3PbbEthernetAccPortEntry	1.3.6.1.4.1.2544.1.12.21.1.1.1		not-accessible	A conceptual row in the f3PbbEthernetAccPortTable.
INT f3PbbEthernetAccPortITagLoopbackMask	1.3.6.1.4.1.2544.1.12.21.1.1.1.1	INTEGER	read-write	This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
STR f3PbbEthernetAccPortITagLoopback1	1.3.6.1.4.1.2544.1.12.21.1.1.1.2	DisplayString	read-write	This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR f3PbbEthernetAccPortITagLoopback2	1.3.6.1.4.1.2544.1.12.21.1.1.1.3	DisplayString	read-write	This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR f3PbbEthernetAccPortITagLoopback3	1.3.6.1.4.1.2544.1.12.21.1.1.1.4	DisplayString	read-write	This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
f3PbbEthernetNetPortTable	1.3.6.1.4.1.2544.1.12.21.1.2		not-accessible	A list of entries corresponding to PBB function on the net port
f3PbbEthernetNetPortEntry	1.3.6.1.4.1.2544.1.12.21.1.2.1		not-accessible	A conceptual row in the f3PbbEthernetNetPortTable.
MAC f3PbbEthernetNetPortBackboneMacAddress	1.3.6.1.4.1.2544.1.12.21.1.2.1.1	MacAddress	read-write	This object is mac address of backbone network port.
INT f3PbbEthernetNetPortITagLoopbackMask	1.3.6.1.4.1.2544.1.12.21.1.2.1.2	INTEGER	read-write	This object allows to specify which itag loopback has been enabled. 1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
STR f3PbbEthernetNetPortITagLoopback1	1.3.6.1.4.1.2544.1.12.21.1.2.1.3	DisplayString	read-write	This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR f3PbbEthernetNetPortITagLoopback2	1.3.6.1.4.1.2544.1.12.21.1.2.1.4	DisplayString	read-write	This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
STR f3PbbEthernetNetPortITagLoopback3	1.3.6.1.4.1.2544.1.12.21.1.2.1.5	DisplayString	read-write	This object allows specification of the Itag 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
f3PbbFlowTable	1.3.6.1.4.1.2544.1.12.21.1.3		not-accessible	A list of entries corresponding to PBB function on the flow
f3PbbFlowEntry	1.3.6.1.4.1.2544.1.12.21.1.3.1		not-accessible	A conceptual row in the f3PbbFlowTable.
FLO f3PbbFlowITagControl	1.3.6.1.4.1.2544.1.12.21.1.3.1.1	FlowTagControl	read-write	This object allows specification of the tag management operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'. and it must be none while ctagcontrol or stagcontrol is not none.
I32 f3PbbFlowITagISID	1.3.6.1.4.1.2544.1.12.21.1.3.1.2	Integer32	read-write	This object is used to specify the ITagISID. Its rang from 256 to 16777214.
I32 f3PbbFlowITagPriority	1.3.6.1.4.1.2544.1.12.21.1.3.1.3	Integer32	read-write	This object is used to specify the priority of ITag. Its rang from 0 to 7.
T/F f3PbbFlowBackboneMacDestinationEnabled	1.3.6.1.4.1.2544.1.12.21.1.3.1.4	TruthValue	read-write	This object indicates whether can assign BMAC value. When enabled, user can assign a unicast BMAC as B_DA for this EVC When disabled, 01-1E-83- will be used as B-DA.
MAC f3PbbFlowBackboneMacDestinationAddress	1.3.6.1.4.1.2544.1.12.21.1.3.1.5	MacAddress	read-write	Customer can configure the backbone MAC destination address, the default value is 01-1E-83-.
T/F f3PbbFlowA2NPbbCapableFlag	1.3.6.1.4.1.2544.1.12.21.1.3.1.6	TruthValue	read-write	When it is false, Drop PBB frames in the A2N direction (FPGA function), Allow to PUSH I-TAG on this flow; When A2NPbbCapableFlag is TRUE, Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG on this flow(normal) will not allow to PUSH S-TAG on this flow, will not allow to PUSH C-TAG on this flow, Software will allow to PUSH C-TAG/S-TAG on this flow.
f3PbbIpManagementTunnelTable	1.3.6.1.4.1.2544.1.12.21.1.4		not-accessible	A list of entries corresponding to PBB function on the mngt tunnel
f3PbbIpManagementTunnelEntry	1.3.6.1.4.1.2544.1.12.21.1.4.1		not-accessible	A conceptual row in the f3PbbIpManagementTunnelTable.
T/F f3PbbIpManagementTunnelItagEnabled	1.3.6.1.4.1.2544.1.12.21.1.4.1.1	TruthValue	read-write	This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based. By default it is disabled
I32 f3PbbIpManagementTunnelISID	1.3.6.1.4.1.2544.1.12.21.1.4.1.2	Integer32	read-write	Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG).
I32 f3PbbIpManagementTunnelIPriority	1.3.6.1.4.1.2544.1.12.21.1.4.1.3	Integer32	read-write	Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present).
T/F f3PbbIpManagementTunnelBackboneMacDestinationEnabled	1.3.6.1.4.1.2544.1.12.21.1.4.1.4	TruthValue	read-write	When enabled, we will use provisioned B-MAC for ARP and for management packets. When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response By default, it is disabled
MAC f3PbbIpManagementTunnelBackboneMacDestinationAddress	1.3.6.1.4.1.2544.1.12.21.1.4.1.5	MacAddress	read-write	User must set a valid MAC address, Only applicable when iTagEnabled = enabled By default, it is 00:00:00:00:00:00
f3PBBPerformanceObjects	1.3.6.1.4.1.2544.1.12.21.2
f3PbbEthernetNetPortStatsTable	1.3.6.1.4.1.2544.1.12.21.2.1		not-accessible	A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
f3PbbEthernetNetPortStatsEntry	1.3.6.1.4.1.2544.1.12.21.2.1.1		not-accessible	A conceptual row in the f3PbbEthernetNetPortStatsTable. Entries exist in this table for each Ethernet interface/port.
NUM f3PbbEthernetNetPortStatsPbbUniBdaDiscard	1.3.6.1.4.1.2544.1.12.21.2.1.1.1	PerfCounter64	read-only	Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
NUM f3PbbEthernetNetPortStatsPbbGroupBdaDiscard	1.3.6.1.4.1.2544.1.12.21.2.1.1.2	PerfCounter64	read-only	Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
f3PbbEthernetNetPortHistoryStatsTable	1.3.6.1.4.1.2544.1.12.21.2.2		not-accessible	A collection of pbb Ethernet Network Port related statistics. These reflect the current data.
f3PbbEthernetNetPortHistoryStatsEntry	1.3.6.1.4.1.2544.1.12.21.2.2.1		not-accessible	A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable. Entries exist in this table for each Ethernet interface/port.
NUM f3PbbEthernetNetPortHistoryStatsPbbUniBdaDiscard	1.3.6.1.4.1.2544.1.12.21.2.2.1.1	PerfCounter64	read-only	Number of PBB frames (BDA is not backbone group MAC) discarded due to receive BDA which is not matching the port's PBB MAC address when port is non-promiscuous mode.
NUM f3PbbEthernetNetPortHistoryStatsPbbGroupBdaDiscard	1.3.6.1.4.1.2544.1.12.21.2.2.1.2	PerfCounter64	read-only	Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID in backbone group MAC in the B-DA when port is non-promiscuous mode.
f3PBBConformance	1.3.6.1.4.1.2544.1.12.21.3
f3PBBCompliances	1.3.6.1.4.1.2544.1.12.21.3.1
f3PBBCompliance	1.3.6.1.4.1.2544.1.12.21.3.1.1			Describes the requirements for conformance to the PBB Object group.
f3PBBGroups	1.3.6.1.4.1.2544.1.12.21.3.2
f3PbbConfigGroup	1.3.6.1.4.1.2544.1.12.21.3.2.1			A collection of objects used to manage the F3 PBB Functionality .
f3PbbStatsGroup	1.3.6.1.4.1.2544.1.12.21.3.2.2			A collection of objects used to manage the F3 PBB Functionality .

RFC description

Defines Provider Backbone Bridging (PBB) facility management objects for ADVA F3 optical networking platforms.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-PBB-MIB

What Is F3-PBB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description