F3-POPM-MIB

All MIBs › F3-POPM-MIB

Organization: ADVA Optical Networking

Last Updated: 2011-10-10

Category: Network Monitoring (RMON), Quality of Service, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Packet Optical Performance Monitoring (POPM) of Ethernet service metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-POPM-MIB?

This ADVA F3 platform MIB implements Precision Optical/Packet Performance Monitoring (POPM) for Ethernet services on FSP150CM/CC devices, providing statistical anomaly detection on service traffic at both access and network-facing ports. It exposes configuration for per-port performance monitors, including operational high/low thresholds, statistical variance, sampling window size, and a glitch-rejection level used to filter transient noise from real anomalies. Its core purpose is performance monitoring and fault detection at the service level rather than physical hardware sensors — f3EthernetAccPortPOPMonitorState reports whether a given port's traffic pattern is currently within or outside its learned operational range, functioning as an early-warning indicator of service degradation. It works together with the other F3 platform MIBs (F3-PBB, F3-PWE3) covering the same FSP150 device rather than an external IETF performance-monitoring MIB. It is deployed by service providers on ADVA FSP150CM/CC network elements, where F3-POPM-MIB SNMP monitoring continuously validates Ethernet service quality against learned baselines.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-POPM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150CM/CC carrier Ethernet device

Monitoring Examples

An admin would poll f3EthernetAccPortPOPMonitorTable/Entry and f3EthernetNetPortPOPMonitorTable/Entry to read f3EthernetAccPortPOPMonitorState per port, and a state change to an alarmed condition combined with f3EthernetAccPortPOPMonitorVariance exceeding its configured range would flag a service traffic anomaly. Adjusting f3EthernetAccPortPOPMonitorOperRangeHi/Low and f3EthernetAccPortPOPMonitorGlitchRejectionLevel tunes sensitivity so brief legitimate bursts don't trigger false alarms, while f3EthernetAccPortPOPMonitorClearAction lets the operator reset an alarmed monitor after investigating.

What Can Be Monitored

performance monitor enable state
operational range high/low thresholds
traffic variance
sampling window size
glitch rejection level
monitor alarm state

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

PerfCounter64

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetAccPortEntry	OBJECT-TYPE
cmEthernetNetPortEntry	OBJECT-TYPE

From CM-PERFORMANCE-MIB

cmEthernetAccPortHistoryEntry	OBJECT-TYPE
cmEthernetAccPortStatsEntry	OBJECT-TYPE
cmEthernetNetPortHistoryEntry	OBJECT-TYPE
cmEthernetNetPortStatsEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3POPMMib	1.3.6.1.4.1.2544.1.12.16			This module documents the Precision Optical Power Monitoring features provided by the F3 product line of products. Copyright (C) ADVA Optical Networking.
f3POPMObjects	1.3.6.1.4.1.2544.1.12.16.1
f3EthernetNetPortPOPMonitorTable	1.3.6.1.4.1.2544.1.12.16.1.1		not-accessible	This table provides ability to manage the Precision Optical Power feature on Ethernet Network Ports.
f3EthernetNetPortPOPMonitorEntry	1.3.6.1.4.1.2544.1.12.16.1.1.1		not-accessible	A conceptual row in the f3EthernetNetPortPOPMonitorTable.
T/F f3EthernetNetPortPOPMonitorEnabled	1.3.6.1.4.1.2544.1.12.16.1.1.1.1	TruthValue	read-write	This object enables/disables Precision Optical Power monitoring on the Ethernet Network Port.
I32 f3EthernetNetPortPOPMonitorOperRangeHi	1.3.6.1.4.1.2544.1.12.16.1.1.1.2	Integer32	read-only	This object provides the higher operating range, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetNetPortPOPMonitorOperRangeLow	1.3.6.1.4.1.2544.1.12.16.1.1.1.3	Integer32	read-only	This object provides the lower operating range, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetNetPortPOPMonitorVariance	1.3.6.1.4.1.2544.1.12.16.1.1.1.4	Integer32	read-write	This object provides the maximum absolute variance, from average, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetNetPortPOPMonitorWindowSize	1.3.6.1.4.1.2544.1.12.16.1.1.1.5	Integer32	read-write	This object provides the window size (time in seconds), for Precision Optical Power monitoring.
POP f3EthernetNetPortPOPMonitorGlitchRejectionLevel	1.3.6.1.4.1.2544.1.12.16.1.1.1.6	POPMGlitchRejectionLevel	read-write	This object provides the maximum number of sequential variance violations constituting a glitch.
POP f3EthernetNetPortPOPMonitorState	1.3.6.1.4.1.2544.1.12.16.1.1.1.7	POPMState	read-only	This object provides the current state of the Precision Optical Monitoring processing.
POP f3EthernetNetPortPOPMonitorClearAction	1.3.6.1.4.1.2544.1.12.16.1.1.1.8	POPMClearAlarmsAction	read-write	This object provides the ability to clear outstanding Precision Optical Monitoring alarms.
f3EthernetAccPortPOPMonitorTable	1.3.6.1.4.1.2544.1.12.16.1.2		not-accessible	This table provides ability to manage the Precision Optical Power feature on Ethernet Access Ports.
f3EthernetAccPortPOPMonitorEntry	1.3.6.1.4.1.2544.1.12.16.1.2.1		not-accessible	A conceptual row in the f3EthernetAccPortPOPMonitorTable.
T/F f3EthernetAccPortPOPMonitorEnabled	1.3.6.1.4.1.2544.1.12.16.1.2.1.1	TruthValue	read-write	This object enables/disables Precision Optical Power monitoring on the Ethernet Access Port.
I32 f3EthernetAccPortPOPMonitorOperRangeHi	1.3.6.1.4.1.2544.1.12.16.1.2.1.2	Integer32	read-only	This object provides the higher operating range, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetAccPortPOPMonitorOperRangeLow	1.3.6.1.4.1.2544.1.12.16.1.2.1.3	Integer32	read-only	This object provides the lower operating range, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetAccPortPOPMonitorVariance	1.3.6.1.4.1.2544.1.12.16.1.2.1.4	Integer32	read-write	This object provides the maximum absolute variance, from average, in 10ths of dbm, for Precision Optical Power monitoring.
I32 f3EthernetAccPortPOPMonitorWindowSize	1.3.6.1.4.1.2544.1.12.16.1.2.1.5	Integer32	read-write	This object provides the window size (time in seconds), for Precision Optical Power monitoring.
POP f3EthernetAccPortPOPMonitorGlitchRejectionLevel	1.3.6.1.4.1.2544.1.12.16.1.2.1.6	POPMGlitchRejectionLevel	read-write	This object provides the maximum number of sequential variance violations constituting a glitch.
POP f3EthernetAccPortPOPMonitorState	1.3.6.1.4.1.2544.1.12.16.1.2.1.7	POPMState	read-only	This object provides the current state of the Precision Optical Monitoring processing.
POP f3EthernetAccPortPOPMonitorClearAction	1.3.6.1.4.1.2544.1.12.16.1.2.1.8	POPMClearAlarmsAction	read-write	This object provides the ability to clear outstanding Precision Optical Monitoring alarms.
f3POPMPerfObjects	1.3.6.1.4.1.2544.1.12.16.2
f3EthernetAccPortPOPMStatsTable	1.3.6.1.4.1.2544.1.12.16.2.1		not-accessible	A collection of Ethernet Access Port Precision Optical Power related statistics. These reflect the current data.
f3EthernetAccPortPOPMStatsEntry	1.3.6.1.4.1.2544.1.12.16.2.1.1		not-accessible	A conceptual row in the f3EthernetAccPortPOPMStatsTable. Entries exist in this table for each Ethernet interface/port.
I32 f3EthernetAccPortPOPMStatsOPR	1.3.6.1.4.1.2544.1.12.16.2.1.1.1	Integer32	read-only	Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMStatsAOPR	1.3.6.1.4.1.2544.1.12.16.2.1.1.2	Integer32	read-only	Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMStatsOPRVar	1.3.6.1.4.1.2544.1.12.16.2.1.1.3	Integer32	read-only	Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMStatsOPRMaxVar	1.3.6.1.4.1.2544.1.12.16.2.1.1.4	Integer32	read-only	Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
U32 f3EthernetAccPortPOPMStatsOPRGlitchRejects	1.3.6.1.4.1.2544.1.12.16.2.1.1.5	Unsigned32	read-only	Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMStatsOPRRTR	1.3.6.1.4.1.2544.1.12.16.2.1.1.6	Unsigned32	read-only	Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMStatsOPROOR	1.3.6.1.4.1.2544.1.12.16.2.1.1.7	Unsigned32	read-only	Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMStatsOPROOV	1.3.6.1.4.1.2544.1.12.16.2.1.1.8	Unsigned32	read-only	Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
f3EthernetAccPortPOPMHistoryTable	1.3.6.1.4.1.2544.1.12.16.2.2		not-accessible	A collection of Ethernet Access Port Precision Optical Power related statistics. These reflect the current data.
f3EthernetAccPortPOPMHistoryEntry	1.3.6.1.4.1.2544.1.12.16.2.2.1		not-accessible	A conceptual row in the f3EthernetAccPortPOPMHistoryTable. Entries exist in this table for each Ethernet interface/port.
I32 f3EthernetAccPortPOPMHistoryOPR	1.3.6.1.4.1.2544.1.12.16.2.2.1.1	Integer32	read-only	Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMHistoryAOPR	1.3.6.1.4.1.2544.1.12.16.2.2.1.2	Integer32	read-only	Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMHistoryOPRVar	1.3.6.1.4.1.2544.1.12.16.2.2.1.3	Integer32	read-only	Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetAccPortPOPMHistoryOPRMaxVar	1.3.6.1.4.1.2544.1.12.16.2.2.1.4	Integer32	read-only	Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
U32 f3EthernetAccPortPOPMHistoryOPRGlitchRejects	1.3.6.1.4.1.2544.1.12.16.2.2.1.5	Unsigned32	read-only	Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMHistoryOPRRTR	1.3.6.1.4.1.2544.1.12.16.2.2.1.6	Unsigned32	read-only	Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMHistoryOPROOR	1.3.6.1.4.1.2544.1.12.16.2.2.1.7	Unsigned32	read-only	Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetAccPortPOPMHistoryOPROOV	1.3.6.1.4.1.2544.1.12.16.2.2.1.8	Unsigned32	read-only	Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
f3EthernetNetPortPOPMStatsTable	1.3.6.1.4.1.2544.1.12.16.2.3		not-accessible	A collection of Ethernet Network Port Precision Optical Power related statistics. These reflect the current data.
f3EthernetNetPortPOPMStatsEntry	1.3.6.1.4.1.2544.1.12.16.2.3.1		not-accessible	A conceptual row in the f3EthernetNetPortPOPMStatsTable. Entries exist in this table for each Ethernet interface/port.
I32 f3EthernetNetPortPOPMStatsOPR	1.3.6.1.4.1.2544.1.12.16.2.3.1.1	Integer32	read-only	Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMStatsAOPR	1.3.6.1.4.1.2544.1.12.16.2.3.1.2	Integer32	read-only	Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMStatsOPRVar	1.3.6.1.4.1.2544.1.12.16.2.3.1.3	Integer32	read-only	Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMStatsOPRMaxVar	1.3.6.1.4.1.2544.1.12.16.2.3.1.4	Integer32	read-only	Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
U32 f3EthernetNetPortPOPMStatsOPRGlitchRejects	1.3.6.1.4.1.2544.1.12.16.2.3.1.5	Unsigned32	read-only	Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMStatsOPRRTR	1.3.6.1.4.1.2544.1.12.16.2.3.1.6	Unsigned32	read-only	Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMStatsOPROOR	1.3.6.1.4.1.2544.1.12.16.2.3.1.7	Unsigned32	read-only	Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMStatsOPROOV	1.3.6.1.4.1.2544.1.12.16.2.3.1.8	Unsigned32	read-only	Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
f3EthernetNetPortPOPMHistoryTable	1.3.6.1.4.1.2544.1.12.16.2.4		not-accessible	A collection of Ethernet Network Port Precision Optical Power related statistics. These reflect the current data.
f3EthernetNetPortPOPMHistoryEntry	1.3.6.1.4.1.2544.1.12.16.2.4.1		not-accessible	A conceptual row in the f3EthernetNetPortPOPMHistoryTable. Entries exist in this table for each Ethernet interface/port.
I32 f3EthernetNetPortPOPMHistoryOPR	1.3.6.1.4.1.2544.1.12.16.2.4.1.1	Integer32	read-only	Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMHistoryAOPR	1.3.6.1.4.1.2544.1.12.16.2.4.1.2	Integer32	read-only	Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMHistoryOPRVar	1.3.6.1.4.1.2544.1.12.16.2.4.1.3	Integer32	read-only	Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
I32 f3EthernetNetPortPOPMHistoryOPRMaxVar	1.3.6.1.4.1.2544.1.12.16.2.4.1.4	Integer32	read-only	Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
U32 f3EthernetNetPortPOPMHistoryOPRGlitchRejects	1.3.6.1.4.1.2544.1.12.16.2.4.1.5	Unsigned32	read-only	Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMHistoryOPRRTR	1.3.6.1.4.1.2544.1.12.16.2.4.1.6	Unsigned32	read-only	Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMHistoryOPROOR	1.3.6.1.4.1.2544.1.12.16.2.4.1.7	Unsigned32	read-only	Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
U32 f3EthernetNetPortPOPMHistoryOPROOV	1.3.6.1.4.1.2544.1.12.16.2.4.1.8	Unsigned32	read-only	Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
f3POPMConformance	1.3.6.1.4.1.2544.1.12.16.3
f3POPMCompliances	1.3.6.1.4.1.2544.1.12.16.3.1
f3POPMCompliance	1.3.6.1.4.1.2544.1.12.16.3.1.1			Describes the requirements for conformance to the POPM Object group.
f3POPMGroups	1.3.6.1.4.1.2544.1.12.16.3.2
f3POPMFacilityGroup	1.3.6.1.4.1.2544.1.12.16.3.2.1			A collection of objects used to manage the F3 POPM Functionality .
f3POPMStatsGroup	1.3.6.1.4.1.2544.1.12.16.3.2.2			A collection of objects used to manage the F3 POPM Functionality .

RFC description

Monitors optical power levels and glitch rejection on Ethernet ports in ADVA F3 optical networking equipment.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Precision Optical/Packet Performance Monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-POPM-MIB

What Is F3-POPM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description