F3-PBB-MIB :: f3PbbEthernetAccPortITagLoopback2

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › F3-PBB-MIB › f3PbbEthernetAccPortITagLoopback2

f3PbbEthernetAccPortITagLoopback2

Module: F3-PBB-MIB

OID (symbolic): F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback2

OID (numeric): 1.3.6.1.4.1.2544.1.12.21.1.1.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This object allows specification of the Itag 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.

What is f3PbbEthernetAccPortITagLoopback2?

Specifies which I-SID and I-TAG priority to loop back (X-Y format, X=I-SID, Y=priority or * for all) for the second loopback slot on this access port, active only when the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. Lets an admin run a second, independent PBB service-instance loopback test concurrently with the first slot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.3
snmpwalk -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback2

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.3.1
snmpget -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback2.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.3.1 s <value>

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback2 OID value, configure state conditions and alerts, and monitor any ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2544advaMIBADVA-MIB
1.3.6.1.4.1.2544.1productsADVA-MIB
1.3.6.1.4.1.2544.1.12fsp150cmADVA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2544.1.12.21f3PBBMIBF3-PBB-MIB
1.3.6.1.4.1.2544.1.12.21.1f3PBBConfigObjectsF3-PBB-MIB
1.3.6.1.4.1.2544.1.12.21.1.1f3PbbEthernetAccPortTableF3-PBB-MIB
1.3.6.1.4.1.2544.1.12.21.1.1.1f3PbbEthernetAccPortEntryF3-PBB-MIB
1.3.6.1.4.1.2544.1.12.21.1.1.1.3f3PbbEthernetAccPortITagLoopback2F3-PBB-MIB