F3-PORTMIRROR-MIB

All MIBs › F3-PORTMIRROR-MIB

Organization: ADVA Optical Networking

Last Updated: 2013-09-20

Category: Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for port mirroring (SPAN) session configuration for traffic analysis on FSP 150.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-PORTMIRROR-MIB?

F3-PORTMIRROR-MIB is an ADVA Optical Networking proprietary MIB for the F3 platform (FSP150CM/CC service demarcation devices), defining SNMP-managed port mirroring (SPAN) sessions used to copy traffic from a source port to a monitor port for analysis. It exposes configuration objects describing each mirror session's source port, monitoring (destination) port, mirroring direction, frame truncation controls, and timestamping options, along with row-status and storage-type administrative controls. Rather than device hardware health, this is a traffic-diagnostics configuration module: it lets operators verify a mirror session's row status is correctly active so a downstream packet-capture/analyzer tool actually receives the intended traffic, revealing whether the switch's mirroring software feature is functioning as configured. It is used alongside ADVA's broader FSP150 MIB suite and standard IF-MIB interface indexing for identifying source/monitor ports. Typical deployment is in carrier-ethernet and access/aggregation networks using ADVA FSP150 CM/CC devices where operators need to non-disruptively tap live traffic for troubleshooting or analysis. Engineers can download the F3-PORTMIRROR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-PORTMIRROR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA FSP150 CM/CC (F3 platform) carrier-ethernet demarcation devices

Monitoring Examples

An admin would poll the f3MirrorSessionTable/f3MirrorSessionEntry to check f3MirrorSessionSourcePort, f3MirrorSessionMonitorPort, and f3MirrorSessionSourcePortDir to confirm which port's ingress/egress/both traffic is being copied to which analyzer port. If f3MirrorSessionRowStatus shows a session as not active, or f3MirrorSessionMirrRsrcPort indicates a resource conflict, that reveals the mirror session failed to program in hardware, explaining why no mirrored traffic is reaching the analyzer. Checking f3MirrorSessionTruncationCtrl and f3MirrorSessionTruncationLength together confirms whether frames are being truncated as expected for a bandwidth-limited capture link.

What Can Be Monitored

mirror session source port
mirror session destination/monitor port
mirroring direction (ingress/egress/both)
session row status (active/failed)
frame truncation configuration
timestamping control setting

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

PerfCounter64
TrafficDirection
VlanId

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

cmEthernetAccPortEntry

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3PortMirrorMIB	1.3.6.1.4.1.2544.1.12.29			This module defines the Port Mirror MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3PortMirrorConfigObjects	1.3.6.1.4.1.2544.1.12.29.1
f3MirrorSessionTable	1.3.6.1.4.1.2544.1.12.29.1.1		not-accessible	A list of entries corresponding to Mirror Session instance for configuration purposes.
f3MirrorSessionEntry	1.3.6.1.4.1.2544.1.12.29.1.1.1		not-accessible	A conceptual row in the f3MirrorSessionTable.
I32 f3MirrorSessionIndex	1.3.6.1.4.1.2544.1.12.29.1.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Port Mirror Session within Network Element.
NUM f3MirrorSessionSourcePort	1.3.6.1.4.1.2544.1.12.29.1.1.1.2	VariablePointer	read-create	Pointer to a Port instance which represents Monitored Port with the Mirror Session. The pointer must be set to cmEthernetAccPortIndex or cmEthernetNetPortIndex instance.
NUM f3MirrorSessionMonitorPort	1.3.6.1.4.1.2544.1.12.29.1.1.1.3	VariablePointer	read-create	Pointer to a Port instance which represents Port where mirrored frames are transmitted. The pointer must be set to cmEthernetAccPortIndex instance.
TRA f3MirrorSessionSourcePortDir	1.3.6.1.4.1.2544.1.12.29.1.1.1.4	TrafficDirection	read-create	Indicates the SourcePort traffic flow direction to be copied for transmit on the MonitorPort: 1) INGRESS: frames received by the SourcePort are mirrored to the transmit direction of the MonitorPort. 2) EGRESS: frames to be transmitted by the SourcePort are mirrored to the transmit direction of the MonitorPort.
T/F f3MirrorSessionTruncationCtrl	1.3.6.1.4.1.2544.1.12.29.1.1.1.5	TruthValue	read-write	Indicates if frame is truncated to TruncationLength before being transmitted on the Monitor Port: 1) DISABLED: the frame is transmitted on the MonitorPort without length modification. 2) ENABLED: the frame is truncated to TruncationLength before being transmitted on the MonitorPort. FCS is relaculated based on the truncated length.
U32 f3MirrorSessionTruncationLength	1.3.6.1.4.1.2544.1.12.29.1.1.1.6	Unsigned32	read-write	Length of mirrored frame truncation when TruncationControl is ENABLED. Possible values are 64 bytes to 1500 bytes. All mirrored frames transmitted on the MonitorPort will have a frame length equal to the TruncationLength where frame length is from first byte of the Destination MAC Address to last bye of the newly calculated FCS.
T/F f3MirrorSessionTimestampControl	1.3.6.1.4.1.2544.1.12.29.1.1.1.7	TruthValue	read-write	Indicates if timestamp information is added to a frame transmitted on the MonitorPort: 1) DISABLED: no timestamp information is added to a frame transmitted on the MonitorPort. 2) ENABLED: a timestamp is added to the frame frame in the 10 bytes before the FCS: - For mirrored frames ingressing the SourcePort, the timestamp is the TOD when the frame was received on the SourcePort. - For mirrored frames egressing the SourcePort, the timestamp is the TOD when the frames was transmitted on the SourcePort.
STO f3MirrorSessionStorageType	1.3.6.1.4.1.2544.1.12.29.1.1.1.8	StorageType	read-create	The type of storage configured for this entry.
ROW f3MirrorSessionRowStatus	1.3.6.1.4.1.2544.1.12.29.1.1.1.9	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3MirrorSessionRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3MirrorSessionRowStatus object may be modified if the associated instance of this object is equal to active(1).
NUM f3MirrorSessionMirrRsrcPort	1.3.6.1.4.1.2544.1.12.29.1.1.1.10	VariablePointer	read-create	Pointer to a Port instance which represents Mirror Resource Port. The pointer must be set to cmEthernetAccPortIndex instance.
NUM f3MirrorSessionFilterProfile	1.3.6.1.4.1.2544.1.12.29.1.1.1.11	VariablePointer	read-create	Pointer to a Mirror Filter Profile instance which represents Mirror Session Filter Profile. The pointer must be set to f3MirrorFilterProfileName instance.
f3PortMirrorAccPortExtTable	1.3.6.1.4.1.2544.1.12.29.1.2		not-accessible	A list of entries corresponding to Ethernet Access Port Facilities for Port Mirror configuration purposes.
f3PortMirrorAccPortExtEntry	1.3.6.1.4.1.2544.1.12.29.1.2.1		not-accessible	A conceptual row in the f3PortMirrorAccPortExtTable.
T/F f3PortMirrorAccPortExtMonitorEnabled	1.3.6.1.4.1.2544.1.12.29.1.2.1.1	TruthValue	read-write	This object allows to Enable/Disable Monitor Mode on Port.
I32 f3PortMirrorAccPortExtBufferSize	1.3.6.1.4.1.2544.1.12.29.1.2.1.2	Integer32	read-write	Applicable when port is in Monitor Mode.
T/F f3PortMirrorAccPortExtMirrRsrcEnabled	1.3.6.1.4.1.2544.1.12.29.1.2.1.3	TruthValue	read-write	This object allows to Enable/Disable Mirror Resource on Port.
f3PortMirrorStatsObjects	1.3.6.1.4.1.2544.1.12.29.2
f3MonitorPortStatsTable	1.3.6.1.4.1.2544.1.12.29.2.1		not-accessible	A list of entries corresponding to the Access Port related Monitor Port Statistics.
f3MonitorPortStatsEntry	1.3.6.1.4.1.2544.1.12.29.2.1.1		not-accessible	A conceptual row in the f3MonitorPortStatsTable.
I32 f3MonitorPortStatsIndex	1.3.6.1.4.1.2544.1.12.29.2.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Ethernet Access Port (Monitor Port) statistics
NUM f3MonitorPortStatsTailDropped	1.3.6.1.4.1.2544.1.12.29.2.1.1.2	PerfCounter64	read-only	64-bit rollover count for taildrops
f3MirrorSessionStatsTable	1.3.6.1.4.1.2544.1.12.29.2.2		not-accessible	A list of entries corresponding to the Mirror Session Statistics.
f3MirrorSessionStatsEntry	1.3.6.1.4.1.2544.1.12.29.2.2.1		not-accessible	A conceptual row in the f3MirrorSessionStatsTable.
I32 f3MirrorSessionStatsIndex	1.3.6.1.4.1.2544.1.12.29.2.2.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Mirror Session statistics
NUM f3MirrorSessionStatsMirrFilterFrameDiscard	1.3.6.1.4.1.2544.1.12.29.2.2.1.2	PerfCounter64	read-only	The number of frames dropped due to a filter having a DENY action.
POR f3MirrorSessionStatsAction	1.3.6.1.4.1.2544.1.12.29.2.2.1.3	PortMirrorStatsAction	read-write	User action performed on Monitor Port Stats.
f3PortMirrorConformance	1.3.6.1.4.1.2544.1.12.29.3
f3PortMirrorCompliances	1.3.6.1.4.1.2544.1.12.29.3.1
f3PortMirrorCompliance	1.3.6.1.4.1.2544.1.12.29.3.1.1			Describes the requirements for conformance to the F3-PORTMIRROR-MIB compilance.
f3PortMirrorGroups	1.3.6.1.4.1.2544.1.12.29.3.2
f3MirrorSessionGroup	1.3.6.1.4.1.2544.1.12.29.3.2.1			A collection of objects used to manage the Port Mirror Session.
f3PortMirrorAccPortExtGroup	1.3.6.1.4.1.2544.1.12.29.3.2.2			A collection of objects used to manage the Access Port attributes related with Port Mirror feature.
f3MonitorPortStatsGroup	1.3.6.1.4.1.2544.1.12.29.3.2.3			A collection of Monitor Port statistic objects.
f3MirrorSessionStatsGroup	1.3.6.1.4.1.2544.1.12.29.3.2.4			A collection of Mirror Session statistic objects.
f3PortMirrorFilterGroup	1.3.6.1.4.1.2544.1.12.29.3.2.5			A collection of objects used to manage the Port Mirror Session Filter functionality.
f3PortMirrorFilterObjects	1.3.6.1.4.1.2544.1.12.29.4
f3MirrorFilterProfileTable	1.3.6.1.4.1.2544.1.12.29.4.1		not-accessible	A list of entries corresponding to Mirror Filter Profile instance for configuration purposes.
f3MirrorFilterProfileEntry	1.3.6.1.4.1.2544.1.12.29.4.1.1		not-accessible	A conceptual row in the f3MirrorFilterProfileTable.
I32 f3MirrorFilterProfileIndex	1.3.6.1.4.1.2544.1.12.29.4.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Mirror Filter Profile within Network Element.
STR f3MirrorFilterProfileName	1.3.6.1.4.1.2544.1.12.29.4.1.1.2	DisplayString	read-create	Mirror Filter Profile Name
MIR f3MirrorFilterProfileDefaultAction	1.3.6.1.4.1.2544.1.12.29.4.1.1.3	MirroredFramesAction	read-create	Mirror Filter Profile Action for a mirrored frame that does not match any filter entry for the profile
STO f3MirrorFilterProfileStorageType	1.3.6.1.4.1.2544.1.12.29.4.1.1.4	StorageType	read-create	The type of storage configured for this entry.
ROW f3MirrorFilterProfileRowStatus	1.3.6.1.4.1.2544.1.12.29.4.1.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3MirrorFilterProfileRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3MirrorFilterProfileRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3MirrorFilterProfileEntryTable	1.3.6.1.4.1.2544.1.12.29.4.2		not-accessible	A list of entries corresponding to Mirror Filter Profile Entry instance for configuration purposes.
f3MirrorFilterProfileEntryEntry	1.3.6.1.4.1.2544.1.12.29.4.2.1		not-accessible	A conceptual row in the f3MirrorFilterProfileEntryTable.
I32 f3MirrorFilterProfileEntryIndex	1.3.6.1.4.1.2544.1.12.29.4.2.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Mirror Filter Profile Entry within Mirror Filter Profile.
NUM f3MirrorFilterProfileEntryFilter	1.3.6.1.4.1.2544.1.12.29.4.2.1.2	VariablePointer	read-create	Pointer to a Mirror Filter. The pointer must be set to f3MirrorFilterName.
U32 f3MirrorFilterProfileEntryPriority	1.3.6.1.4.1.2544.1.12.29.4.2.1.3	Unsigned32	read-create	Execution order for this Filter Entry within the Profile
MIR f3MirrorFilterProfileEntryAction	1.3.6.1.4.1.2544.1.12.29.4.2.1.4	MirroredFramesAction	read-create	User action performed on this Mirror Filter Profile Entryinstance: - ACCEPT: a Mirrored Frame that matches this filter entry is transmitted on the Monitor Port - DENY: a Mirrored Frame that matches this filter entry is discarded and not transmitted on the Monitor Port
STO f3MirrorFilterProfileEntryStorageType	1.3.6.1.4.1.2544.1.12.29.4.2.1.5	StorageType	read-create	The type of storage configured for this entry.
ROW f3MirrorFilterProfileEntryRowStatus	1.3.6.1.4.1.2544.1.12.29.4.2.1.6	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3MirrorFilterProfileEntryRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3MirrorFilterProfileEntryRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3MirrorFilterTable	1.3.6.1.4.1.2544.1.12.29.4.3		not-accessible	A list of entries corresponding to Mirror Filter instance for configuration purposes.
f3MirrorFilterEntry	1.3.6.1.4.1.2544.1.12.29.4.3.1		not-accessible	A conceptual row in the f3MirrorFilterTable.
I32 f3MirrorFilterIndex	1.3.6.1.4.1.2544.1.12.29.4.3.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this Mirror Filter within Network Element.
STR f3MirrorFilterName	1.3.6.1.4.1.2544.1.12.29.4.3.1.2	DisplayString	read-create	Mirror Filter Name
T/F f3MirrorFilterL2OuterVIDCtrlEnabled	1.3.6.1.4.1.2544.1.12.29.4.3.1.3	TruthValue	read-create	Object used to determine if l2FilterOuterVIDLow/High values will be applied as frame match criteria
VLA f3MirrorFilterL2OuterVIDLow	1.3.6.1.4.1.2544.1.12.29.4.3.1.4	VlanId	read-create	A Outer tag VID value to be applied as a frame match criteria to the Outer Tag of the frame when l2FilterOuterVIDControl is ENABLED.
VLA f3MirrorFilterL2OuterVIDHigh	1.3.6.1.4.1.2544.1.12.29.4.3.1.5	VlanId	read-create	A Outer tag VID value to be applied as a frame match criteria to the Outer Tag of the frame when l2FilterOuterVIDControl is ENABLED.
T/F f3MirrorFilterL2OuterPrioCtrlEnabled	1.3.6.1.4.1.2544.1.12.29.4.3.1.6	TruthValue	read-create	Object used to determine if l2FilterOuterPrioLow/High values will be applied as frame match criteria
I32 f3MirrorFilterL2OuterPrioLow	1.3.6.1.4.1.2544.1.12.29.4.3.1.7	Integer32	read-create	A Outer tag Prio value to be applied as a frame match criteria to the Outer Tag of the frame when l2FilterOuterPrioControl is ENABLED.
I32 f3MirrorFilterL2OuterPrioHigh	1.3.6.1.4.1.2544.1.12.29.4.3.1.8	Integer32	read-create	A Outer tag Prio value to be applied as a frame match criteria to the Outer Tag of the frame when l2FilterOuterPrioControl is ENABLED.
T/F f3MirrorFilterL3IPv4DstAddrCtrlEnabled	1.3.6.1.4.1.2544.1.12.29.4.3.1.9	TruthValue	read-create	Object used to determine if l3FilterIPv4DstAddr/DstAddrMask values will be applied as frame match criteria
IP f3MirrorFilterL3IPv4DstAddr	1.3.6.1.4.1.2544.1.12.29.4.3.1.10	IpAddress	read-create	A IPv4 Address value to be applied as a frame match criteria to the IPv4 Destination Address of the frame when l3FilterIPv4DstAddrControl is ENABLED.
IP f3MirrorFilterL3IPv4DstAddrMask	1.3.6.1.4.1.2544.1.12.29.4.3.1.11	IpAddress	read-create	A IPv4 Address Mask value to be applied as a frame match criteria to the IPv4 Destination Address of the frame when l3FilterIPv4DstAddrControl is ENABLED.
T/F f3MirrorFilterL3IPv4SrcAddrCtrlEnabled	1.3.6.1.4.1.2544.1.12.29.4.3.1.12	TruthValue	read-create	Object used to determine if l3FilterIPv4SrcAddr/SrcAddrMask values will be applied as frame match criteria
IP f3MirrorFilterL3IPv4SrcAddr	1.3.6.1.4.1.2544.1.12.29.4.3.1.13	IpAddress	read-create	A IPv4 Address value to be applied as a frame match criteria to the IPv4 Source Address of the frame when l3FilterIPv4SrcAddrControl is ENABLED.
IP f3MirrorFilterL3IPv4SrcAddrMask	1.3.6.1.4.1.2544.1.12.29.4.3.1.14	IpAddress	read-create	A IPv4 Address Mask value to be applied as a frame match criteria to the IPv4 Source Address of the frame when l3FilterIPv4SrcAddrControl is ENABLED.
STO f3MirrorFilterStorageType	1.3.6.1.4.1.2544.1.12.29.4.3.1.15	StorageType	read-create	The type of storage configured for this entry.
ROW f3MirrorFilterRowStatus	1.3.6.1.4.1.2544.1.12.29.4.3.1.16	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3MirrorFilterRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3MirrorFilterRowStatus object may be modified if the associated instance of this object is equal to active(1).

RFC description

Port mirror MIB for ADVA F3 (FSP150CM/CC) optical networking products defining mirror session and filter management.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (port mirroring/SPAN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-PORTMIRROR-MIB

What Is F3-PORTMIRROR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description