F3-ERP-MIB

All MIBs › F3-ERP-MIB

Organization: ADVA Optical Networking

Last Updated: 2012-09-13

Category: Domain: Telco/Transport, Protocol: ERPS, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Ethernet Ring Protection (ERP/G.8032) ring topology management and failover.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-ERP-MIB?

F3-ERP-MIB is ADVA Optical Networking's vendor-specific MIB for the FSP150CM/CC product line, implementing G.8032 Ethernet Ring Protection (ERP) for managing ring-topology network resilience and failover. It exposes configuration objects (ring group admin state, RAPS ring/node/VLAN IDs, VLAN priority) alongside operational and secondary state, plus dedicated statistics and notification groupings. This is squarely a hardware/software status MIB for fault monitoring: f3ErpGroupOperationalState and f3ErpGroupSecondaryState reveal whether a ring is healthy, in a protection-switching state, or has failed over, which is critical for detecting link/node faults in the ring. It explicitly builds on the ITU-T G.8032 Ethernet Ring Protection standard and its RAPS (Ring Automatic Protection Switching) PDU model. It's typically deployed on ADVA FSP150 carrier Ethernet access/aggregation devices used in metro Ethernet ring topologies. Engineers can download the F3-ERP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-ERP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA Optical Networking FSP150CM/CC carrier Ethernet device

Monitoring Examples

An operator would poll f3ErpGroupTable/f3ErpGroupEntry, checking f3ErpGroupOperationalState and f3ErpGroupSecondaryState to detect whether a ring has entered a protection-switched or failed state, which would indicate a break in the ring (e.g., a fiber cut or node failure). Cross-referencing f3ErpGroupRapsRingId, f3ErpGroupRapsNodeId, and f3ErpGroupRapsVlanId helps identify which specific ring and node reported the event. The f3ErpStatsObjects subtree would be polled for RAPS message counts to confirm the ring protection protocol is actively exchanging control PDUs as expected.

What Can Be Monitored

ring admin state
ring operational state
ring secondary (protection) state
RAPS ring ID, node ID, VLAN ID
RAPS VLAN priority and MD level
ring protection statistics

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
OperationalState
SecondaryState
VlanEthertype
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex

OBJECT-TYPE

From CM-PROTECTION-MIB

CmProtUnitState
CmProtUnitType

From IEEE8021-CFM-MIB

Dot1agCfmMDLevel

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3ErpCompliance	1.3.6.1.4.1.2544.1.12.25.3.1.1			Describes the requirements for conformance to the F3-ERP-MIB compilance.
f3ErpCompliances	1.3.6.1.4.1.2544.1.12.25.3.1
f3ErpConfigObjects	1.3.6.1.4.1.2544.1.12.25.1
f3ErpConformance	1.3.6.1.4.1.2544.1.12.25.3
ERP f3ErpGroupAction	1.3.6.1.4.1.2544.1.12.25.1.1.1.30	ERPGroupAction	read-write	User action performed on this ERP instance. For manualSwitch and forcedSwitch actions f3ErpGroupActionObject has to be specified prior to settng this object.
NUM f3ErpGroupActionObject	1.3.6.1.4.1.2544.1.12.25.1.1.1.31	VariablePointer	read-write	Object identfier used to specify the OID of a port on which f3ErpGroupAction should occur. Applicable for manualSwitch and forcedSwitch actions. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port a Network Port.
ADM f3ErpGroupAdminState	1.3.6.1.4.1.2544.1.12.25.1.1.1.2	AdminState	read-create	Administrative State of this ERP instance. INSERVICE is normal operation. MANAGEMENT suppresses alarms. DISABLED initiates blocking on ring port 0 and stops all RAPS processing and forwarding. The ERP instance must be in the MANAGEMENT or DISABLED state when modifying the following ERP instance attributes: rapsVID, ringPort0, ringPort1, ringPort0RPLRole, ringPort1RPLRole, rapsRingId, rapsMdLevel, subRingWithoutVirtualChannel, compatibleVersion.
G80 f3ErpGroupCompatibleVersion	1.3.6.1.4.1.2544.1.12.25.1.1.1.11	G8032Version	read-write	Indicates compatability with a version of G.8032 for this ring instance.
f3ErpGroupEntry	1.3.6.1.4.1.2544.1.12.25.1.1.1		not-accessible	A conceptual row in the f3ErpGroupTable.
f3ErpGroupGroup	1.3.6.1.4.1.2544.1.12.25.3.2.1			A collection of objects used to manage the ERP Group.
I32 f3ErpGroupGuardTime	1.3.6.1.4.1.2544.1.12.25.1.1.1.14	Integer32	read-create	The Guard Time value in milliseconds for this ERP instance.
I32 f3ErpGroupHoldOffTime	1.3.6.1.4.1.2544.1.12.25.1.1.1.16	Integer32	read-create	The Hold-off Time value in milliseconds for this ERP instance.
I32 f3ErpGroupIndex	1.3.6.1.4.1.2544.1.12.25.1.1.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this ERP Group within Network Element.
NUM f3ErpGroupInterconnectionErp	1.3.6.1.4.1.2544.1.12.25.1.1.1.35	VariablePointer	read-write	Oid of the associated Loop Avoidance instance at an interconnect node. Current only ERP instances are supported for this; in the future, STP instances may be as well.
T/F f3ErpGroupInterconnectPropagateTc	1.3.6.1.4.1.2544.1.12.25.1.1.1.36	TruthValue	read-write	Allows for propgation of Topology Change information in the protocol of the associated Loop Avoidance instance at an interconnect node. Derived from MI_RAPS_Propagate_TC in [G8032]
I32 f3ErpGroupMaxFpNum	1.3.6.1.4.1.2544.1.12.25.1.1.1.38	Integer32	read-write	The max number of flow point which the erp supports. This object is not supported - setting its value will not have any effect on the System.
RIN f3ErpGroupNodeState	1.3.6.1.4.1.2544.1.12.25.1.1.1.24	RingNodeState	read-only	ERP Node state.
OPE f3ErpGroupOperationalState	1.3.6.1.4.1.2544.1.12.25.1.1.1.3	OperationalState	read-only	Operational State of this ERP instance. The ERP operational state is outage when there is an equipment failure causing the ERP to be non-functional; otherwise the operational state is normal.
NUM f3ErpGroupProtectedFlow	1.3.6.1.4.1.2544.1.12.25.1.2.1.1	VariablePointer	read-only	Pointer to a Flow instance which is protected by an ERP instance. The pointer must be set to cmFlowIndex or cmMPFlowIndex instance.
f3ErpGroupProtectedFlowEntry	1.3.6.1.4.1.2544.1.12.25.1.2.1		not-accessible	A conceptual row in the f3ErpGroupProtectedFlowsTable.
f3ErpGroupProtectedFlowTable	1.3.6.1.4.1.2544.1.12.25.1.2		not-accessible	A list of entries corresponding to Flows which are protected by an ERP group instance. These flows can be access flows or multipoint flows depending on the traffic model of the ERP Ring Port.
T/F f3ErpGroupProtectMgmtTunnel	1.3.6.1.4.1.2544.1.12.25.1.1.1.23	TruthValue	read-create	Indication of whether this ERP instance is protecting management Tunnels on the ring ports.
NUM f3ErpGroupRapsInterconnectionNode	1.3.6.1.4.1.2544.1.12.25.1.1.1.39	RapsInterconnectionNode	read-create	Type of sub-ring interconnection node. PRIMARY/SECONDARY role for minimizing interconnected ring segmentation.
DOT f3ErpGroupRapsMdLevel	1.3.6.1.4.1.2544.1.12.25.1.1.1.10	Dot1agCfmMDLevel	read-create	MD (or MEG) level of the transmitted/received RAPS PDUs for this ERP instance.
RAP f3ErpGroupRapsMultipleFailure	1.3.6.1.4.1.2544.1.12.25.1.1.1.40	RapsMultipleFailure	read-create	Sub-ring interconnection node that is designated to perform the Manual Switch for minimizing interconnected ring segmentation.
MAC f3ErpGroupRapsNodeId	1.3.6.1.4.1.2544.1.12.25.1.1.1.6	MacAddress	read-create	Node ID of the local system for this ERP instance. The value is used as the Node ID in the RAPS PDU.
I32 f3ErpGroupRapsRingId	1.3.6.1.4.1.2544.1.12.25.1.1.1.5	Integer32	read-create	Ring ID of this ERP instance. The value is used in the destination address of the RAPS PDU.
NUM f3ErpGroupRapsVirtualChannelMep	1.3.6.1.4.1.2544.1.12.25.1.1.1.37	VariablePointer	read-write	ID of MEP monitoring an UP MEP Monitoring the R-APS VID.
U32 f3ErpGroupRapsVlanEtherType	1.3.6.1.4.1.2544.1.12.25.1.1.1.9	Unsigned32	read-create	VID value of the VLAN tag for transmitted/received RAPS PDUs for this ERP instance.
VLA f3ErpGroupRapsVlanId	1.3.6.1.4.1.2544.1.12.25.1.1.1.7	VlanId	read-create	VID value of the VLAN tag for transmitted/received RAPS PDUs for this ERP instance.
VLA f3ErpGroupRapsVlanPrio	1.3.6.1.4.1.2544.1.12.25.1.1.1.8	VlanPriority	read-create	P-bit value of the VLAN tag for transmitted RAPS PDUs for this ERP instance.
T/F f3ErpGroupRevertive	1.3.6.1.4.1.2544.1.12.25.1.1.1.12	TruthValue	read-create	Revertive control for the ring. Only applicable on the RPL Owner node.
NUM f3ErpGroupRingPort0	1.3.6.1.4.1.2544.1.12.25.1.1.1.17	VariablePointer	read-create	Pointer to a Port instance which represents Ring Port 0 in the ERP Group. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port is a Network Port.
NUM f3ErpGroupRingPort0MEP	1.3.6.1.4.1.2544.1.12.25.1.1.1.18	VariablePointer	read-create	Pointer to a CFM MEP instance monitoring Ring Port 0 for this ERP instance. The pointer must be set to dot1agCfmMepIfIndex instance.
RPL f3ErpGroupRingPort0Role	1.3.6.1.4.1.2544.1.12.25.1.1.1.19	RPLRole	read-create	RPL Role of Ring Port 0. When f3ErpGroupRingPort1Role is NEIGHBOR or OWNER, this value MUST be NONE.
NUM f3ErpGroupRingPort1	1.3.6.1.4.1.2544.1.12.25.1.1.1.20	VariablePointer	read-create	Pointer to a Port instance which represents Ring Port 1 in the ERP Group. The pointer must be set to cmEthernetAccPortIndex instance if the Ring Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port is a Network Port.
NUM f3ErpGroupRingPort1MEP	1.3.6.1.4.1.2544.1.12.25.1.1.1.21	VariablePointer	read-create	Pointer to a CFM MEP instance monitoring Ring Port 1 for this ERP instance. The pointer must be set to dot1agCfmMepIfIndex instance.
RPL f3ErpGroupRingPort1Role	1.3.6.1.4.1.2544.1.12.25.1.1.1.22	RPLRole	read-create	RPL Role of Ring Port 1. When f3ErpGroupRingPort0Role is NEIGHBOR or OWNER, this value MUST be NONE.
ROW f3ErpGroupRowStatus	1.3.6.1.4.1.2544.1.12.25.1.1.1.34	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3ErpGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3ErpGroupRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3ErpGroups	1.3.6.1.4.1.2544.1.12.25.3.2
SEC f3ErpGroupSecondaryState	1.3.6.1.4.1.2544.1.12.25.1.1.1.4	SecondaryState	read-only	Secondary State of this ERP instance. The ERP secondary state is supporting entity outage (SGEO) when there is an equipment failure causing the ERP to be non-functional; otherwise the sescondary state is active.
STO f3ErpGroupStorageType	1.3.6.1.4.1.2544.1.12.25.1.1.1.33	StorageType	read-create	The type of storage configured for this entry.
T/F f3ErpGroupSubRingWithoutVirtChan	1.3.6.1.4.1.2544.1.12.25.1.1.1.13	TruthValue	read-create	Indicates whether R-APS channel forms a closed loop around the ring ENABLED: no RAPS Virtual Channel (i.e., open ring) DISABLED: RAPS forms a closed loop (major ring or sub-ring with virtual channel)
f3ErpGroupTable	1.3.6.1.4.1.2544.1.12.25.1.1		not-accessible	A list of entries corresponding to Ethernet Ring Protection instance for configuration purposes.
I32 f3ErpGroupTxRapsBPR	1.3.6.1.4.1.2544.1.12.25.1.1.1.29	Integer32	read-only	Blocked Port Reference field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking.
T/F f3ErpGroupTxRapsDNF	1.3.6.1.4.1.2544.1.12.25.1.1.1.28	TruthValue	read-only	Do Not Flush field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking.
RAP f3ErpGroupTxRapsRequest	1.3.6.1.4.1.2544.1.12.25.1.1.1.26	RAPSRequest	read-only	Request/State field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking.
T/F f3ErpGroupTxRapsRplBlocked	1.3.6.1.4.1.2544.1.12.25.1.1.1.27	TruthValue	read-only	RPL Blocked field fo the last generated R-APS message on the Ring Ports. Valid when the node is blocking.
STR f3ErpGroupUserLabel	1.3.6.1.4.1.2544.1.12.25.1.1.1.32	DisplayString	read-create	User Label associated with the ERP Group.
I32 f3ErpGroupWaitToRestore	1.3.6.1.4.1.2544.1.12.25.1.1.1.15	Integer32	read-create	The Wait-to-Restore time value in minutes for this ERP instance.
I32 f3ErpGroupWTRRemainingTime	1.3.6.1.4.1.2544.1.12.25.1.1.1.25	Integer32	read-only	The time remaining (in seconds) for this ERP instance to wait to restore.
f3ErpMIB	1.3.6.1.4.1.2544.1.12.25			This module defines the G.8032 Ethernet Ring Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3ErpStatsObjects	1.3.6.1.4.1.2544.1.12.25.2
f3ErpUnitEntry	1.3.6.1.4.1.2544.1.12.25.1.3.1		not-accessible	A conceptual row in the f3ErpUnitTable.
f3ErpUnitGroup	1.3.6.1.4.1.2544.1.12.25.3.2.2			A collection of objects used to manage the ERP Unit.
I32 f3ErpUnitIndex	1.3.6.1.4.1.2544.1.12.25.1.3.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this ERP Unit within ERP Group.
U32 f3ErpUnitNumBlockedStateTrans	1.3.6.1.4.1.2544.1.12.25.2.1.1.1	Unsigned32	read-only	Total number of transitions into a blocking state for Ring Port.
NUM f3ErpUnitPort	1.3.6.1.4.1.2544.1.12.25.1.3.1.2	VariablePointer	read-only	ERP Unit's points to a facility (port). This object represents the facility Network Element port.
NUM f3ErpUnitPortMEP	1.3.6.1.4.1.2544.1.12.25.1.3.1.3	VariablePointer	read-only	Pointer to a CFM MEP instance monitoring Ring Port.
NUM f3ErpUnitPortRapsFp	1.3.6.1.4.1.2544.1.12.25.1.3.1.11	VariablePointer	read-only	Pointer to a R-APS FlowPoint associated with this Ring Port.
RPL f3ErpUnitPortRole	1.3.6.1.4.1.2544.1.12.25.1.3.1.4	RPLRole	read-only	RPL Role of Ring Port 1. When f3ErpGroupRingPort2Role is NEIGHBOR or OWNER, this value MUST be NONE.
I32 f3ErpUnitPortRxRapsBPR	1.3.6.1.4.1.2544.1.12.25.1.3.1.9	Integer32	read-only	Blocked Port Reference field fo the last received R-APS message on Ring Port.
T/F f3ErpUnitPortRxRapsDNF	1.3.6.1.4.1.2544.1.12.25.1.3.1.8	TruthValue	read-only	Do Not Flush field fo the last received R-APS message on Ring Port.
MAC f3ErpUnitPortRxRapsNodeId	1.3.6.1.4.1.2544.1.12.25.1.3.1.10	MacAddress	read-only	Node ID of the local system for this ERP instance. The value is used as the Node ID in the RAPS PDU.
RAP f3ErpUnitPortRxRapsRequest	1.3.6.1.4.1.2544.1.12.25.1.3.1.6	RAPSRequest	read-only	Request/State field fo the last received R-APS message on Ring Port.
T/F f3ErpUnitPortRxRapsRplBlocked	1.3.6.1.4.1.2544.1.12.25.1.3.1.7	TruthValue	read-only	RPL Blocked field fo the last received R-APS message on Ring Port.
RIN f3ErpUnitPortStatus	1.3.6.1.4.1.2544.1.12.25.1.3.1.5	RingPortStatus	read-only	Status of Ring Port.
U32 f3ErpUnitRapsEventPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.16	Unsigned32	read-only	Count of Event RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsEventPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.10	Unsigned32	read-only	Count of Event RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsForcedSwitchPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.15	Unsigned32	read-only	Count of Forced Switch RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsForcedSwitchPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.9	Unsigned32	read-only	Count of Forced Switch RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsInvalidOamVersionPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.17	Unsigned32	read-only	Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance and an OAM Version field other than 0 or 1.
U32 f3ErpUnitRapsManualSwitchPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.14	Unsigned32	read-only	Count of Manual Switch RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsManualSwitchPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.8	Unsigned32	read-only	Count of Manual Switch RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsNoReqPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.11	Unsigned32	read-only	Count of No Request RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsNoReqPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.5	Unsigned32	read-only	Count of No Request RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsNoReqRBPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.12	Unsigned32	read-only	Count of No Request, RPL Blocked RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsNoReqRBPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.6	Unsigned32	read-only	Count of No Request, RPL Blocked RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsPDUsDiscarded	1.3.6.1.4.1.2544.1.12.25.2.1.1.4	Unsigned32	read-only	Count of all RAPS PDUs received on the port and discarded where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.3	Unsigned32	read-only	Count of all RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.2	Unsigned32	read-only	Count of all RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsRsvdEventSubcode	1.3.6.1.4.1.2544.1.12.25.2.1.1.19	Unsigned32	read-only	Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance, an OAM Opcode field of 40 (R-APS), a request/state value of 14 (EVT) and a sub-code value that is not 0.
U32 f3ErpUnitRapsRsvdRequestPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.18	Unsigned32	read-only	Count of OAM PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsSignalFailPDUsRx	1.3.6.1.4.1.2544.1.12.25.2.1.1.13	Unsigned32	read-only	Count of Signal Fail RAPS PDUs received on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
U32 f3ErpUnitRapsSignalFailPDUsTx	1.3.6.1.4.1.2544.1.12.25.2.1.1.7	Unsigned32	read-only	Count of Signal Fail RAPS PDUs transmitted on the port where the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
f3ErpUnitStatsEntry	1.3.6.1.4.1.2544.1.12.25.2.1.1		not-accessible	A conceptual row in the f3ErpUnitStatsTable.
f3ErpUnitStatsGroup	1.3.6.1.4.1.2544.1.12.25.3.2.3			A collection of objects used to manage the ERP Unit Statistics.
f3ErpUnitStatsTable	1.3.6.1.4.1.2544.1.12.25.2.1		not-accessible	A list of entries corresponding to Ethernet Ring Protection Unit Statistics
f3ErpUnitTable	1.3.6.1.4.1.2544.1.12.25.1.3		not-accessible	A list of entries corresponding to Ethernet Ring Protection Unit

RFC description

Defines G.8032 Ethernet Ring Protection (ERP) management for ADVA Optical Networking FSP150 product lines.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (G.8032 Ethernet Ring Protection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-ERP-MIB

What Is F3-ERP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description