All MIBs › F3-PBB-MIB › f3PbbEthernetAccPortITagLoopback1
f3PbbEthernetAccPortITagLoopback1
Module: F3-PBB-MIB
OID (symbolic): F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback1
OID (numeric): 1.3.6.1.4.1.2544.1.12.21.1.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is f3PbbEthernetAccPortITagLoopback1?
Specifies which I-SID and I-TAG priority to loop back (in the form X-Y, where X is the I-SID and Y is the priority, or Y=* for all priorities) for the first loopback slot on this access port, only effective when the matching bit in f3PbbEthernetAccPortITagLoopbackMask is set. An admin uses this to isolate a single PBB service instance for a facility/terminal loopback test without looping the whole port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.2 snmpwalk -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.2.1 snmpget -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.21.1.1.1.2.1 s <value>
Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F3-PBB-MIB::f3PbbEthernetAccPortITagLoopback1 OID value, configure state conditions and alerts, and monitor any ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.21 | f3PBBMIB | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1 | f3PBBConfigObjects | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.1 | f3PbbEthernetAccPortTable | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.1.1 | f3PbbEthernetAccPortEntry | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.1.1.2 | f3PbbEthernetAccPortITagLoopback1 | F3-PBB-MIB |