All MIBs › F3-PBB-MIB › f3PbbEthernetNetPortITagLoopback1
f3PbbEthernetNetPortITagLoopback1
Module: F3-PBB-MIB
OID (symbolic): F3-PBB-MIB::f3PbbEthernetNetPortITagLoopback1
OID (numeric): 1.3.6.1.4.1.2544.1.12.21.1.2.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object allows specification of the Itag 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if the corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set. The value to be specified should be in the form X-Y where X is the ISID and Y is the ITAG Priority. If Y is specified as a *, all Priorities (0 to 7) are looped back.
What is f3PbbEthernetNetPortITagLoopback1?
Specifies which I-SID and I-TAG priority to loop back (X-Y format, X=I-SID, Y=priority or * for all priorities) for the first loopback slot on this network port, active only when the matching bit in f3PbbEthernetNetPortITagLoopbackMask is set. Lets an admin isolate one PBB service for loopback testing on the network-facing side of the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.2.1.3 snmpwalk -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetNetPortITagLoopback1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.21.1.2.1.3.1 snmpget -v2c -c public <target> F3-PBB-MIB::f3PbbEthernetNetPortITagLoopback1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.21.1.2.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> f3PbbEthernetNetPortITagLoopback1.1
Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the F3-PBB-MIB::f3PbbEthernetNetPortITagLoopback1 OID value, configure state conditions and alerts, and monitor any ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (Provider Backbone Bridging) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2544.1.12.21 | f3PBBMIB | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1 | f3PBBConfigObjects | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.2 | f3PbbEthernetNetPortTable | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.2.1 | f3PbbEthernetNetPortEntry | F3-PBB-MIB |
| 1.3.6.1.4.1.2544.1.12.21.1.2.1.3 | f3PbbEthernetNetPortITagLoopback1 | F3-PBB-MIB |