All MIBs › DIAMETER-BASE-PROTOCOL-MIB
Organization: IETF dime Working Group.
Last Updated: 2007-01-28
Description: IETF MIB for managing entities implementing the Diameter Base Protocol, applicable to AAA servers and network access infrastructure
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DIAMETER-BASE-PROTOCOL-MIB?
DIAMETER-BASE-PROTOCOL-MIB is a vendor-neutral IETF standards-track MIB defined for entities implementing the Diameter Base Protocol, the AAA (Authentication, Authorization, and Accounting) signaling protocol used in telecom and IP networks. It exposes objects covering peer connection state, message statistics, and protocol-level counters for Diameter sessions. In a monitoring context it is used to verify that a Diameter node's peer connections are established and healthy and that message processing (requests, answers, errors) is proceeding normally, serving as a software/service health indicator for the AAA signaling stack rather than physical hardware sensors. It is defined as an extension of the general AAA MIB framework referenced in the Diameter Base Protocol RFC and is meant to be used alongside standard SNMP transport and notification infrastructure. It is typically deployed on AAA servers, Diameter agents, and network access infrastructure such as mobile core or broadband access gateways. Engineers implementing or auditing this functionality typically reference the DIAMETER-BASE-PROTOCOL-MIB RFC/standard documentation for the authoritative specification.
IPNetwork Monitor allows you to monitor SNMP objects defined in DIAMETER-BASE-PROTOCOL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- vendor-neutral, standards-based MIB, not tied to a specific manufacturer
- AAA servers and Diameter agents/gateways
Monitoring Examples
No specific object or table names were provided in sample_objects for this module, so a concrete instance-level polling example cannot be grounded in real names. Based on the module description, an administrator would generally expect to poll Diameter peer table entries and message/error counters to confirm that peer connections are up and that answer/error rates are within normal bounds. Because sample_objects is empty, the specific scalar and table names available are not confirmed here.
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| mib-2 |
From SNMPv2-TC
| RowStatus | |
| StorageType | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| diameterBasePMIB | 1.3.6.1.2.1.119 | The MIB module for entities implementing the Diameter Base Protocol. Copyright (C) The Internet Society (2007). This initial version of this MIB module was published in RFC yyyy; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. | ||
| diameterBaseProtocolMIB | 1.3.6.1.2.1.119.1 | |||
| diameterBaseNotifications | 1.3.6.1.2.1.119.1.0 | |||
| NTF dbpProtocolErrorNotif | 1.3.6.1.2.1.119.1.0.1 | An dbpProtocolError Notification is sent when both the following conditions are true: 1) the value of dbpProtocolErrorNotifEnabled is True(1) 2) the value of dbpPerPeerStatsProtocolErrors changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpProtocolError 'notification event' in a five second period, where a 'notification event' is the transmission of a single Notification PDU to a list of Notification destinations. If additional premanent failures occur within the five second 'throttling' period, then these notification events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsProtocolErrors to detect any missed dbpProtocolError notification events, e.g. due to throttling or transmission loss. | ||
| NTF dbpTransientFailureNotif | 1.3.6.1.2.1.119.1.0.2 | An dbpTransientFailure Notification is sent when both the following conditions are true: 1) the value of dbpTransientFailureNotifEnabled is True(1) 2) the value of dbpPerPeerStatsTransientFailures changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpTransientFailure 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional transient failures occur within the five second 'throttling' period, then these notification events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsTransientFailures to detect any missed dbpTransientFailure notification events, e.g. due to throttling or transmission loss. | ||
| NTF dbpPermanentFailureNotif | 1.3.6.1.2.1.119.1.0.3 | An dbpPermanentFailure notification is sent when both the following conditions are true: 1) the value of dbpPermanentFailureNotifEnabled is True(1) 2) the value of dbpPerPeerStatsPermanentFailures changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPermanentFailure 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional premanent failures occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsPermanentFailures to detect any missed dbpPermanentFailure trap-events, e.g. due to throttling or transmission loss. | ||
| NTF dbpPeerConnectionDownNotif | 1.3.6.1.2.1.119.1.0.4 | An dbpPeerConnectionDown notification is sent when both the following conditions are true: 1) the value of dbpPeerConnectionDownNotifEnabled is True(1) 2) dbpPerPeerStatsState changes to closed(1) It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPeerConnectionDown 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional 'transport down' events occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent. | ||
| NTF dbpPeerConnectionUpNotif | 1.3.6.1.2.1.119.1.0.5 | An dbpPeerConnectionUp notification is sent when both thefollowing conditions are true: 1) the value of dbpPeerConnectionUpNotifEnabled is True(1) 2) the value of dbpPerPeerStatsState changes to either rOpen(6)or iOpen(7) It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpPeerConnectionDown 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional 'transport down' events occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent. | ||
| diameterBaseObjects | 1.3.6.1.2.1.119.1.1 | |||
| dbpLocalCfgs | 1.3.6.1.2.1.119.1.1.1 | |||
| STR dbpLocalId | 1.3.6.1.2.1.119.1.1.1.1 | SnmpAdminString | read-only | The implementation-specific identification string for the Diameter software in use on the system; for example: 'diameterd' |
| dbpLocalIpAddrTable | 1.3.6.1.2.1.119.1.1.1.2 | not-accessible | The table listing the Diameter local host's IP Addresses. | |
| dbpLocalIpAddrEntry | 1.3.6.1.2.1.119.1.1.1.2.1 | not-accessible | A row entry representing a Diameter local host IP Address. | |
| U32 dbpLocalIpAddrIndex | 1.3.6.1.2.1.119.1.1.1.2.1.1 | Unsigned32 | not-accessible | A number uniquely identifying the number of IP Addresses supported by this Diameter host. |
| IPt dbpLocalIpAddrType | 1.3.6.1.2.1.119.1.1.1.2.1.2 | InetAddressType | read-only | The type of internet address stored in dbpLocalIpAddress. |
| IP dbpLocalIpAddress | 1.3.6.1.2.1.119.1.1.1.2.1.3 | InetAddress | read-only | The IP-Address of the host, which is of the type specified in dbpLocalIpAddrType. |
| U32 dbpLocalTcpListenPort | 1.3.6.1.2.1.119.1.1.1.3 | Unsigned32 | read-only | Diameter TCP 'listen' port. |
| U32 dbpLocalSctpListenPort | 1.3.6.1.2.1.119.1.1.1.4 | Unsigned32 | read-only | Diameter SCTP 'listen' port. |
| STR dbpLocalOriginHost | 1.3.6.1.2.1.119.1.1.1.5 | SnmpAdminString | read-write | This object represents the Local Origin Host. |
| STR dbpLocalRealm | 1.3.6.1.2.1.119.1.1.1.6 | SnmpAdminString | read-only | This object represents the Local Realm Name. |
| dbpLocalApplicationsTable | 1.3.6.1.2.1.119.1.1.1.7 | not-accessible | The table listing the Diameter applications supported by this server. | |
| dbpLocalApplicationsEntry | 1.3.6.1.2.1.119.1.1.1.7.1 | not-accessible | A row entry representing a Diameter application on this server. | |
| U32 dbpLocalApplicationsIndex | 1.3.6.1.2.1.119.1.1.1.7.1.1 | Unsigned32 | not-accessible | A number uniquely identifying a supported Diameter application. Upon reload, dbpLocalApplIndex values may be changed. |
| STO dbpLocalApplStorageType | 1.3.6.1.2.1.119.1.1.1.7.1.2 | StorageType | read-create | The storage type for this conceptual row. None of the columnar objects is writable when the conceptual row is permanent. |
| ROW dbpLocalApplicationsStatus | 1.3.6.1.2.1.119.1.1.1.7.1.3 | RowStatus | read-create | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the cdsgStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding dbpLocalApplIndex has been set. dbpLocalApplIndex may not be modified while the value of this object is active(1): An attempt to set these objects while the value of dbpLocalApplStatus is active(1) will result in an inconsistentValue error. Entries in this table with dbpLocalApplStatus equal to active(1) remain in the table until destroyed. Entries in this table with dbpLocalApplStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). |
| dbpAppAdvToPeerTable | 1.3.6.1.2.1.119.1.1.1.8 | not-accessible | The table listing the applications advertised by this host to each peer and the types of service supported: accounting, authentication or both. | |
| dbpAppAdvToPeerEntry | 1.3.6.1.2.1.119.1.1.1.8.1 | not-accessible | A row entry representing a discovered or configured Diameter peer server. | |
| U32 dbpAppAdvToPeerVendorId | 1.3.6.1.2.1.119.1.1.1.8.1.1 | Unsigned32 | not-accessible | The IANA Enterprise Code value assigned to the vendor of the Diameter device. |
| U32 dbpAppAdvToPeerIndex | 1.3.6.1.2.1.119.1.1.1.8.1.2 | Unsigned32 | not-accessible | A number uniquely identifying a Diameter application advertised as supported by this host to each peer. Upon reload, dbpAppAdvToPeerIndex values may be changed |
| INT dbpAppAdvToPeerServices | 1.3.6.1.2.1.119.1.1.1.8.1.3 | INTEGER | read-only | The type of services supported for each application, accounting, authentication or both. |
| STO dbpAppAdvToPeerStorageType | 1.3.6.1.2.1.119.1.1.1.8.1.4 | StorageType | read-create | The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. |
| ROW dbpAppAdvToPeerStatus | 1.3.6.1.2.1.119.1.1.1.8.1.5 | RowStatus | read-create | Status of the entry: creating the entry causes the application to be advertised, destroying the entry ceases advertisement. |
| dbpLocalStats | 1.3.6.1.2.1.119.1.1.2 | |||
| C32 dbpLocalStatsTotalMessagesIn | 1.3.6.1.2.1.119.1.1.2.1 | Counter32 | read-only | The total number of Diameter Base Protocol messages received. |
| C32 dbpLocalStatsTotalMessagesOut | 1.3.6.1.2.1.119.1.1.2.2 | Counter32 | read-only | The total number of Diameter Base Protocol messages transmitted. |
| TIK dbpLocalStatsTotalUpTime | 1.3.6.1.2.1.119.1.1.2.3 | TimeTicks | read-only | This object represents the total time this Diameter server has been up until now. |
| TIK dbpLocalResetTime | 1.3.6.1.2.1.119.1.1.2.4 | TimeTicks | read-only | If the server keeps persistent state (e.g., a process) and supports a 'reset' operation (e.g., can be told to re-read configuration files), this value will be the time elapsed (in hundredths of a second) since the server was 'reset'. For software that does not have persistence or does not support a 'reset' operation, this value will be zero. |
| INT dbpLocalConfigReset | 1.3.6.1.2.1.119.1.1.2.5 | INTEGER | read-write | Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state; reset(2) - command to reinitialize server state; initializing(3) - server (re)initializing; running(4) - server currently running. |
| dbpPeerCfgs | 1.3.6.1.2.1.119.1.1.3 | |||
| dbpPeerTable | 1.3.6.1.2.1.119.1.1.3.1 | not-accessible | The table listing information regarding the discovered or configured Diameter peer servers. | |
| dbpPeerEntry | 1.3.6.1.2.1.119.1.1.3.1.1 | not-accessible | A row entry representing a discovered or configured Diameter peer server. | |
| U32 dbpPeerIndex | 1.3.6.1.2.1.119.1.1.3.1.1.1 | Unsigned32 | not-accessible | A number uniquely identifying each Diameter peer with which the host server communicates. Upon reload, dbpPeerIndex values may be changed. |
| STR dbpPeerId | 1.3.6.1.2.1.119.1.1.3.1.1.2 | SnmpAdminString | read-create | The server identifier for the Diameter peer. It must be unique and non-empty. |
| U32 dbpPeerPortConnect | 1.3.6.1.2.1.119.1.1.3.1.1.3 | Unsigned32 | read-only | The connection port this server used to connect to the Diameter peer. If there is no active connection, this value will be zero(0). |
| U32 dbpPeerPortListen | 1.3.6.1.2.1.119.1.1.3.1.1.4 | Unsigned32 | read-only | The port the server is listening on. |
| INT dbpPeerProtocol | 1.3.6.1.2.1.119.1.1.3.1.1.5 | INTEGER | read-only | The transport protocol (tcp/sctp) the Diameter peer is using. |
| INT dbpPeerSecurity | 1.3.6.1.2.1.119.1.1.3.1.1.6 | INTEGER | read-only | The security the Diameter peer is using. other(1) - Unknown Security Protocol tls(2) - Transport Layer Security Protocol ipsec(3) - Internet Protocol Security |
| U32 dbpPeerFirmwareRevision | 1.3.6.1.2.1.119.1.1.3.1.1.7 | Unsigned32 | read-only | Firmware revision of peer. If no firmware revision, the revision of the Diameter software module may be reported instead. |
| STO dbpPeerStorageType | 1.3.6.1.2.1.119.1.1.3.1.1.8 | StorageType | read-create | The storage type for this conceptual row. Only the dbpPeerPortListen object is writable when the conceptual row is permanent. |
| ROW dbpPeerStatus | 1.3.6.1.2.1.119.1.1.3.1.1.9 | RowStatus | read-create | Status of the peer entry: creating the entry enables the peer, destroying the entry disables the peer. |
| dbpPeerIpAddrTable | 1.3.6.1.2.1.119.1.1.3.2 | not-accessible | The table listing the Diameter peer IP addresses. | |
| dbpPeerIpAddrEntry | 1.3.6.1.2.1.119.1.1.3.2.1 | not-accessible | A row entry representing a peer Diameter server. | |
| U32 dbpPerrIpAddressIndex | 1.3.6.1.2.1.119.1.1.3.2.1.1 | Unsigned32 | not-accessible | A number uniquely identifying the number of IP Addresses supported by all Diameter peers. |
| IPt dbpPeerIpAddressType | 1.3.6.1.2.1.119.1.1.3.2.1.2 | InetAddressType | read-only | The type of address stored in diameterPeerIpAddress. |
| IP dbpPeerIpAddress | 1.3.6.1.2.1.119.1.1.3.2.1.3 | InetAddress | read-only | The active IP Address(es) used for connections. |
| dbpAppAdvFromPeerTable | 1.3.6.1.2.1.119.1.1.3.3 | not-accessible | The table listing the applications advertised by each peer to this host and the types of service supported: accounting, authentication or both. | |
| dbpAppAdvFromPeerEntry | 1.3.6.1.2.1.119.1.1.3.3.1 | not-accessible | A row entry representing a discovered or configured Diameter peer server. | |
| U32 dbpAppAdvFromPeerVendorId | 1.3.6.1.2.1.119.1.1.3.3.1.1 | Unsigned32 | not-accessible | The IANA Enterprise Code value assigned to the vendor of the Diameter application. |
| U32 dbpAppAdvFromPeerIndex | 1.3.6.1.2.1.119.1.1.3.3.1.2 | Unsigned32 | not-accessible | A number uniquely identifying the applications advertised as supported from each Diameter peer. |
| INT dbpAppAdvFromPeerType | 1.3.6.1.2.1.119.1.1.3.3.1.3 | INTEGER | read-only | The type of services supported for each application, accounting, authentication or both. acct(1) - accounting auth(2) - authentication both(3) - both accounting and authentication. |
| dbpPeerVendorTable | 1.3.6.1.2.1.119.1.1.3.4 | not-accessible | The table listing the Vendor IDs supported by the peer. | |
| dbpPeerVendorEntry | 1.3.6.1.2.1.119.1.1.3.4.1 | not-accessible | A row entry representing a Vendor ID supported by the peer. | |
| U32 dbpPeerVendorIndex | 1.3.6.1.2.1.119.1.1.3.4.1.1 | Unsigned32 | not-accessible | A number uniquely identifying the Vendor ID supported by the peer. Upon reload, dbpPeerVendorIndex values may be changed. |
| INT dbpPeerVendorId | 1.3.6.1.2.1.119.1.1.3.4.1.2 | INTEGER | read-create | The active vendor ID used for peer connections. diameterVendorIetf(0) -- IETF diameterVendor3gpp(10415) - 3GPP |
| STO dbpPeerVendorStorageType | 1.3.6.1.2.1.119.1.1.3.4.1.3 | StorageType | read-create | The storage type for this conceptual row. None of the objects are writable when the conceptual row is permanent. |
| ROW dbpPeerVendorRowStatus | 1.3.6.1.2.1.119.1.1.3.4.1.4 | RowStatus | read-create | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the dbpPeerVendorRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding dbpPeerVendorId has been set. Also, a newly created row cannot be made active until the corresponding 'dbpPeerIndex' has been set. dbpPeerVendorId may not be modified while the value of this object is active(1): An attempt to set these objects while the value of dbpPeerVendorRowStatus is active(1) will result in an inconsistentValue error. Entries in this table with dbpPeerVendorRowStatus equal to active(1) remain in the table until destroyed. Entries in this table with dbpPeerVendorRowStatus equal to values other than active(1) will be destroyed after timeout (5 minutes). |
| dbpPeerStats | 1.3.6.1.2.1.119.1.1.4 | |||
| dbpPerPeerStatsTable | 1.3.6.1.2.1.119.1.1.4.1 | not-accessible | The table listing the Diameter peer statistics. | |
| dbpPerPeerStatsEntry | 1.3.6.1.2.1.119.1.1.4.1.1 | not-accessible | A row entry representing a Diameter peer. | |
| INT dbpPerPeerStatsState | 1.3.6.1.2.1.119.1.1.4.1.1.1 | INTEGER | read-only | Connection state in the Peer State Machine of the peer with which this Diameter server is communicating. closed - Connection closed with this peer. waitConnAck - Waiting for an acknowledgment from this peer. waitICea - Waiting for a Capabilities-Exchange- Answer from this peer. elect - When the peer and the server are both trying to bring up a connection with each other at the same time. An election process begins which determines which socket remains open. waitReturns - Waiting for election returns. r-open - Responder transport connection is used for communication. i-open - Initiator transport connection is used for communication. closing - Actively closing and doing cleanup. |
| TIK dbpPerPeerStatsStateDuration | 1.3.6.1.2.1.119.1.1.4.1.1.2 | TimeTicks | read-only | Peer state duration. |
| INT dbpPerPeerStatsLastDiscCause | 1.3.6.1.2.1.119.1.1.4.1.1.3 | INTEGER | read-only | The last cause for a peers disconnection. rebooting - A scheduled reboot is imminent. busy - The peer's internal resources are constrained, and it has determined that the transport connection needs to be shutdown. doNotWantToTalk - The peer has determined that it does not see a need for the transport connection to exist, since it does not expect any messages to be exchanged in the foreseeable future. electionLost - The peer has determined that it has lost the election process and has therefore disconnected the transport connection. |
| INT dbpPerPeerStatsWhoInitDisconnect | 1.3.6.1.2.1.119.1.1.4.1.1.4 | INTEGER | read-only | Did the host or peer initiate the disconnect? host - If this server initiated the disconnect. peer - If the peer with which this server was connected initiated the disconnect. |
| INT dbpPerPeerStatsDWCurrentStatus | 1.3.6.1.2.1.119.1.1.4.1.1.5 | INTEGER | read-only | okay - Indicates the connection is presumed working. suspect - Indicates the connection is possibly congested or down. down - The peer is no longer reachable, causing the transport connection to be shutdown. reopen - Three watchdog messages are exchanged with accepted round trip times, and the connection to the peer is considered stabilized. |
| C32 dbpPerPeerStatsTimeoutConnAtmpts | 1.3.6.1.2.1.119.1.1.4.1.1.6 | Counter32 | read-only | If there is no transport connection with a peer, this is the number of times the server attempts to connect to that peer. This is reset on disconnection. |
| C32 dbpPerPeerStatsASRsIn | 1.3.6.1.2.1.119.1.1.4.1.1.7 | Counter32 | read-only | Abort-Session-Request messages received from the peer. |
| C32 dbpPerPeerStatsASRsOut | 1.3.6.1.2.1.119.1.1.4.1.1.8 | Counter32 | read-only | Abort-Session-Request messages sent to the peer. |
| C32 dbpPerPeerStatsASAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.9 | Counter32 | read-only | Number of Abort-Session-Answer messages received from the peer. |
| C32 dbpPerPeerStatsASAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.10 | Counter32 | read-only | Number of Abort-Session-Answer messages sent to the peer. |
| C32 dbpPerPeerStatsACRsIn | 1.3.6.1.2.1.119.1.1.4.1.1.11 | Counter32 | read-only | Number of Accounting-Request messages received from the peer. |
| C32 dbpPerPeerStatsACRsOut | 1.3.6.1.2.1.119.1.1.4.1.1.12 | Counter32 | read-only | Number of Accounting-Request messages sent to the peer. |
| C32 dbpPerPeerStatsACAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.13 | Counter32 | read-only | Number of Accounting-Answer messages received from the peer. |
| C32 dbpPerPeerStatsACAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.14 | Counter32 | read-only | Number of Accounting-Answer messages sent to the peer. |
| C32 dbpPerPeerStatsCERsIn | 1.3.6.1.2.1.119.1.1.4.1.1.15 | Counter32 | read-only | Number of Capabilities-Exchange-Request messages received from the peer. |
| C32 dbpPerPeerStatsCERsOut | 1.3.6.1.2.1.119.1.1.4.1.1.16 | Counter32 | read-only | Number of Capabilities-Exchange-Request messages sent to the peer. |
| C32 dbpPerPeerStatsCEAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.17 | Counter32 | read-only | Number of Capabilities-Exchange-Answer messages received from the peer. |
| C32 dbpPerPeerStatsCEAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.18 | Counter32 | read-only | Number of Capabilities-Exchange-Answer messages sent to the peer. |
| C32 dbpPerPeerStatsDWRsIn | 1.3.6.1.2.1.119.1.1.4.1.1.19 | Counter32 | read-only | Number of Device-Watchdog-Request messages received from the peer. |
| C32 dbpPerPeerStatsDWRsOut | 1.3.6.1.2.1.119.1.1.4.1.1.20 | Counter32 | read-only | Number of Device-Watchdog-Request messages sent to the peer. |
| C32 dbpPerPeerStatsDWAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.21 | Counter32 | read-only | Number of Device-Watchdog-Answer messages received from the peer. |
| C32 dbpPerPeerStatsDWAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.22 | Counter32 | read-only | Number of Device-Watchdog-Answer messages sent to the peer. |
| C32 dbpPerPeerStatsDPRsIn | 1.3.6.1.2.1.119.1.1.4.1.1.23 | Counter32 | read-only | Number of Disconnect-Peer-Request messages received. |
| C32 dbpPerPeerStatsDPRsOut | 1.3.6.1.2.1.119.1.1.4.1.1.24 | Counter32 | read-only | Number of Disconnect-Peer-Request messages sent. |
| C32 dbpPerPeerStatsDPAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.25 | Counter32 | read-only | Number of Disconnect-Peer-Answer messages received. |
| C32 dbpPerPeerStatsDPAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.26 | Counter32 | read-only | Number of Disconnect-Peer-Answer messages sent. |
| C32 dbpPerPeerStatsRARsIn | 1.3.6.1.2.1.119.1.1.4.1.1.27 | Counter32 | read-only | Number of Re-Auth-Request messages received. |
| C32 dbpPerPeerStatsRARsOut | 1.3.6.1.2.1.119.1.1.4.1.1.28 | Counter32 | read-only | Number of Re-Auth-Request messages sent. |
| C32 dbpPerPeerStatsRAAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.29 | Counter32 | read-only | Number of Re-Auth-Answer messages received. |
| C32 dbpPerPeerStatsRAAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.30 | Counter32 | read-only | Number of Re-Auth-Answer messages sent. |
| C32 dbpPerPeerStatsSTRsIn | 1.3.6.1.2.1.119.1.1.4.1.1.31 | Counter32 | read-only | Number of Session-Termination-Request messages received from the peer. |
| C32 dbpPerPeerStatsSTRsOut | 1.3.6.1.2.1.119.1.1.4.1.1.32 | Counter32 | read-only | Number of Session-Termination-Request messages sent to the peer. |
| C32 dbpPerPeerStatsSTAsIn | 1.3.6.1.2.1.119.1.1.4.1.1.33 | Counter32 | read-only | Number of Session-Termination-Answer messages received from the peer. |
| C32 dbpPerPeerStatsSTAsOut | 1.3.6.1.2.1.119.1.1.4.1.1.34 | Counter32 | read-only | Number of Session-Termination-Answer messages sent to the peer. |
| TIK dbpPerPeerStatsDWReqTimer | 1.3.6.1.2.1.119.1.1.4.1.1.35 | TimeTicks | read-only | Device-Watchdog Request Timer, which is the interval between packets sent to peers. |
| C32 dbpPerPeerStatsRedirectEvents | 1.3.6.1.2.1.119.1.1.4.1.1.36 | Counter32 | read-only | Redirect Event count, which is the number of redirects sent from a peer. |
| C32 dbpPerPeerStatsAccDupRequests | 1.3.6.1.2.1.119.1.1.4.1.1.37 | Counter32 | read-only | The number of duplicate Diameter Accounting-Request packets received. |
| C32 dbpPerPeerStatsMalformedReqsts | 1.3.6.1.2.1.119.1.1.4.1.1.38 | Counter32 | read-only | The number of malformed Diameter packets received. |
| C32 dbpPerPeerStatsAccsNotRecorded | 1.3.6.1.2.1.119.1.1.4.1.1.39 | Counter32 | read-only | The number of Diameter Accounting-Request packets which were received and responded to but not recorded. |
| C32 dbpPerPeerStatsAccRetrans | 1.3.6.1.2.1.119.1.1.4.1.1.40 | Counter32 | read-only | The number of Diameter Accounting-Request packets retransmitted to this Diameter server. |
| C32 dbpPerPeerStatsTotalRetrans | 1.3.6.1.2.1.119.1.1.4.1.1.41 | Counter32 | read-only | The number of Diameter packets retransmitted to this Diameter server, not to include Diameter Accounting-Request packets retransmitted. |
| G32 dbpPerPeerStatsAccPendReqstsOut | 1.3.6.1.2.1.119.1.1.4.1.1.42 | Gauge32 | read-only | The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission. |
| C32 dbpPerPeerStatsAccReqstsDropped | 1.3.6.1.2.1.119.1.1.4.1.1.43 | Counter32 | read-only | The number of Accounting-Requests to this server that have been dropped. |
| C32 dbpPerPeerStatsHByHDropMessages | 1.3.6.1.2.1.119.1.1.4.1.1.44 | Counter32 | read-only | An answer message that is received with an unknown Hop-by-Hop Identifier. Does not include Accounting Requests dropped. |
| C32 dbpPerPeerStatsEToEDupMessages | 1.3.6.1.2.1.119.1.1.4.1.1.45 | Counter32 | read-only | Duplicate answer messages that are to be locally consumed. Does not include duplicate Accounting Requests received. |
| C32 dbpPerPeerStatsUnknownTypes | 1.3.6.1.2.1.119.1.1.4.1.1.46 | Counter32 | read-only | The number of Diameter packets of unknown type which were received. |
| C32 dbpPerPeerStatsProtocolErrors | 1.3.6.1.2.1.119.1.1.4.1.1.47 | Counter32 | read-only | Number of protocol errors returned to peer, but not including redirects. |
| C32 dbpPerPeerStatsTransientFailures | 1.3.6.1.2.1.119.1.1.4.1.1.48 | Counter32 | read-only | Transient Failure count. |
| C32 dbpPerPeerStatsPermanentFailures | 1.3.6.1.2.1.119.1.1.4.1.1.49 | Counter32 | read-only | Number of permanent failures returned to peer. |
| C32 dbpPerPeerStatsTransportDown | 1.3.6.1.2.1.119.1.1.4.1.1.50 | Counter32 | read-only | Number of unexpected transport failures. |
| dbpRealmCfgs | 1.3.6.1.2.1.119.1.1.5 | |||
| dbpRealmKnownPeersTable | 1.3.6.1.2.1.119.1.1.5.1 | not-accessible | The table listing the Diameter Realms and known peers. | |
| dbpRealmKnownPeersEntry | 1.3.6.1.2.1.119.1.1.5.1.1 | not-accessible | A row entry representing a Diameter Realm and known peers. | |
| U32 dbpRealmKnownPeersIndex | 1.3.6.1.2.1.119.1.1.5.1.1.1 | Unsigned32 | not-accessible | A sequential identifier number. |
| U32 dbpRealmKnownPeers | 1.3.6.1.2.1.119.1.1.5.1.1.2 | Unsigned32 | read-only | The index of the peer this realm knows about. This is an ordered list, where the ordering signifies the order in which the peers are tried. Same as the dbpPeerIndex |
| INT dbpRealmKnownPeersChosen | 1.3.6.1.2.1.119.1.1.5.1.1.3 | INTEGER | read-only | How the realm chooses which peer to send packets to. roundRobin - The peer used for each transaction is selected based on the order in which peers are configured. loadBalance - The peer used for each transaction is based on the load metric (maybe implementation dependent) of all peers defined for the realm, with the least loaded server selected first. firstPreferred - The first defined server is always used for transactions unless failover occurs. mostRecentFirst - The most recently used server is used first for each transaction. |
| dbpRealmStats | 1.3.6.1.2.1.119.1.1.6 | |||
| dbpRealmMessageRouteTable | 1.3.6.1.2.1.119.1.1.6.1 | not-accessible | The table listing the Diameter Realm-based Message Route information. | |
| dbpRealmMessageRouteEntry | 1.3.6.1.2.1.119.1.1.6.1.1 | not-accessible | A row entry representing a Diameter Realm Based Message Route server. | |
| U32 dbpRealmMessageRouteIndex | 1.3.6.1.2.1.119.1.1.6.1.1.1 | Unsigned32 | not-accessible | A number uniquely identifying each Realm. |
| STR dbpRealmMessageRouteRealm | 1.3.6.1.2.1.119.1.1.6.1.1.2 | SnmpAdminString | read-only | Realm name |
| U32 dbpRealmMessageRouteApp | 1.3.6.1.2.1.119.1.1.6.1.1.3 | Unsigned32 | read-only | Application id used to route packets to this realm. |
| INT dbpRealmMessageRouteType | 1.3.6.1.2.1.119.1.1.6.1.1.4 | INTEGER | read-only | The types of service supported for each realm application: accounting, authentication or both. |
| INT dbpRealmMessageRouteAction | 1.3.6.1.2.1.119.1.1.6.1.1.5 | INTEGER | read-only | The action is used to identify how a message should be treated based on the realm, application and type. local - Diameter messages that resolve to a route entry with the Local Action set to Local can be satisfied locally, and do not need to be routed to another server. relay - All Diameter messages that fall within this category MUST be routed to a next-hop server, without modifying any non-routing AVPs. proxy - All Diameter messages that fall within this category MUST be routed to a next-hop server. redirect - Diameter messages that fall within this category MUST have the identity of the home Diameter server(s) appended, and returned to the sender of the message. |
| C32 dbpRealmMessageRouteACRsIn | 1.3.6.1.2.1.119.1.1.6.1.1.6 | Counter32 | read-only | Number of Accounting-Request messages received from the realm. |
| C32 dbpRealmMessageRouteACRsOut | 1.3.6.1.2.1.119.1.1.6.1.1.7 | Counter32 | read-only | Number of Accounting-Request messages sent to the realm. |
| C32 dbpRealmMessageRouteACAsIn | 1.3.6.1.2.1.119.1.1.6.1.1.8 | Counter32 | read-only | Number of Accounting-Answer messages received from the realm. |
| C32 dbpRealmMessageRouteACAsOut | 1.3.6.1.2.1.119.1.1.6.1.1.9 | Counter32 | read-only | Number of Accounting-Answer messages sent to the realm. |
| C32 dbpRealmMessageRouteRARsIn | 1.3.6.1.2.1.119.1.1.6.1.1.10 | Counter32 | read-only | Number of Re-Auth-Request messages received from the realm. |
| C32 dbpRealmMessageRouteRARsOut | 1.3.6.1.2.1.119.1.1.6.1.1.11 | Counter32 | read-only | Number of Re-Auth-Request messages sent to the realm. |
| C32 dbpRealmMessageRouteRAAsIn | 1.3.6.1.2.1.119.1.1.6.1.1.12 | Counter32 | read-only | Number of Re-Auth-Answer messages received from the realm. |
| C32 dbpRealmMessageRouteRAAsOut | 1.3.6.1.2.1.119.1.1.6.1.1.13 | Counter32 | read-only | Number of Re-Auth-Answer messages sent to the realm. |
| C32 dbpRealmMessageRouteSTRsIn | 1.3.6.1.2.1.119.1.1.6.1.1.14 | Counter32 | read-only | Number of Session-Termination-Request messages received from the realm. |
| C32 dbpRealmMessageRouteSTRsOut | 1.3.6.1.2.1.119.1.1.6.1.1.15 | Counter32 | read-only | Number of Session-Termination-Request messages sent to the realm. |
| C32 dbpRealmMessageRouteSTAsIn | 1.3.6.1.2.1.119.1.1.6.1.1.16 | Counter32 | read-only | Number of Session-Termination-Answer messages received from the realm. |
| C32 dbpRealmMessageRouteSTAsOut | 1.3.6.1.2.1.119.1.1.6.1.1.17 | Counter32 | read-only | Number of Session-Termination-Answer messages sent to the realm. |
| C32 dbpRealmMessageRouteASRsIn | 1.3.6.1.2.1.119.1.1.6.1.1.18 | Counter32 | read-only | Number of Abort-Session-Request messages received from the realm. |
| C32 dbpRealmMessageRouteASRsOut | 1.3.6.1.2.1.119.1.1.6.1.1.19 | Counter32 | read-only | Number of Abort-Session-Request messages sent to the realm. |
| C32 dbpRealmMessageRouteASAsIn | 1.3.6.1.2.1.119.1.1.6.1.1.20 | Counter32 | read-only | Number of Abort-Session-Answer messages received from the realm. |
| C32 dbpRealmMessageRouteASAsOut | 1.3.6.1.2.1.119.1.1.6.1.1.21 | Counter32 | read-only | Number of Abort-Session-Answer messages sent to the realm. |
| C32 dbpRealmMessageRouteAccRetrans | 1.3.6.1.2.1.119.1.1.6.1.1.22 | Counter32 | read-only | The number of Diameter accounting packets retransmitted to this realm. |
| C32 dbpRealmMessageRouteAccDupReqsts | 1.3.6.1.2.1.119.1.1.6.1.1.23 | Counter32 | read-only | The number of duplicate Diameter accounting packets sent to this realm. |
| G32 dbpRealmMessageRoutePendReqstsOut | 1.3.6.1.2.1.119.1.1.6.1.1.24 | Gauge32 | read-only | The number of Diameter Accounting-Request packets sent to this peer that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent to this server and decremented due to receipt of an Accounting-Response, a timeout or a retransmission. |
| C32 dbpRealmMessageRouteReqstsDrop | 1.3.6.1.2.1.119.1.1.6.1.1.25 | Counter32 | read-only | The number of requsts dropped by this realm. |
| dbpNotifCfgs | 1.3.6.1.2.1.119.1.1.7 | |||
| T/F dbpProtocolErrorNotifEnabled | 1.3.6.1.2.1.119.1.1.7.1 | TruthValue | read-write | Setting the value of this object to True(1) enables the dbpProtocolErrorNotif notification. |
| T/F dbpTransientFailureNotifEnabled | 1.3.6.1.2.1.119.1.1.7.2 | TruthValue | read-write | Setting the value of this object to True(1) enables the dbpTransientFailure Notification. |
| T/F dbpPermanentFailureNotifEnabled | 1.3.6.1.2.1.119.1.1.7.3 | TruthValue | read-write | Setting the value of this object to True(1) enables the dbpPermanentFailure notification. |
| T/F dbpPeerConnectionDownNotifEnabled | 1.3.6.1.2.1.119.1.1.7.4 | TruthValue | read-write | Setting the value of this object to True(1) enables the dbpPeerConnectionDown notification. |
| T/F dbpPeerConnectionUpNotifEnabled | 1.3.6.1.2.1.119.1.1.7.5 | TruthValue | read-write | Setting the value of this object to True(1) enables the dbpPeerConnectionUp notification. |
| diameterBaseConform | 1.3.6.1.2.1.119.1.2 | |||
| diameterBaseProtocolMIBCompliances | 1.3.6.1.2.1.119.1.2.1 | |||
| diameterBaseProtocolCompliance | 1.3.6.1.2.1.119.1.2.1.1 | The compliance statement for Diameter Base Protocol entities. | ||
| diameterBaseProtocolMIBGroups | 1.3.6.1.2.1.119.1.2.2 | |||
| dbpLocalCfgGroup | 1.3.6.1.2.1.119.1.2.2.1 | A collection of objects providing configuration common to the server. | ||
| dbpPeerCfgGroup | 1.3.6.1.2.1.119.1.2.2.2 | A collection of objects providing configuration of the Diameter peers. | ||
| dbpPeerStatsGroup | 1.3.6.1.2.1.119.1.2.2.3 | A collection of objects providing statistics of the Diameter peers. | ||
| dbpNotificationsGroup | 1.3.6.1.2.1.119.1.2.2.4 | The set of notifications which an agent is required to implement. | ||
| dbpNotifCfgGroup | 1.3.6.1.2.1.119.1.2.2.5 | A collection of objects providing configuration for base protocol notifications. | ||
| dbpLocalCfgSkippedGroup | 1.3.6.1.2.1.119.1.2.2.6 | A collection of objects providing configuration common to the server. | ||
| dbpLocalStatsSkippedGroup | 1.3.6.1.2.1.119.1.2.2.7 | A collection of objects providing statistics common to the server. | ||
| dbpPeerCfgSkippedGroup | 1.3.6.1.2.1.119.1.2.2.8 | A collection of objects providing configuration for Diameter peers. | ||
| dbpPeerStatsSkippedGroup | 1.3.6.1.2.1.119.1.2.2.9 | A collection of objects providing statistics of Diameter peers. | ||
| dbpRealmCfgSkippedGroup | 1.3.6.1.2.1.119.1.2.2.10 | A collection of objects providing configuration for realm message routing. | ||
| dbpRealmStatsSkippedGroup | 1.3.6.1.2.1.119.1.2.2.11 | A collection of objects providing statistics of realm message routing. |
RFC description
Diameter Base Protocol MIB for AAA peer management, configuration, and protocol statistics.
Start monitoring AAA server/Diameter agent (vendor-neutral, IETF standard) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.