All MIBs › DIAMETER-BASE-PROTOCOL-MIB › dbpTransientFailureNotif
dbpTransientFailureNotif
Module: DIAMETER-BASE-PROTOCOL-MIB
OID (symbolic): DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotif
OID (numeric): 1.3.6.1.2.1.119.1.0.2
Node type: NOTIFICATION-TYPE
Description: An dbpTransientFailure Notification is sent when both the following conditions are true: 1) the value of dbpTransientFailureNotifEnabled is True(1) 2) the value of dbpPerPeerStatsTransientFailures changes It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one dbpTransientFailure 'notification event' in a five second period, where a 'notification event' is the transmission of a single notification PDU to a list of notification destinations. If additional transient failures occur within the five second 'throttling' period, then these notification events should be suppressed by the agent. An NMS should periodically check the value of dbpPerPeerStatsTransientFailures to detect any missed dbpTransientFailure notification events, e.g. due to throttling or transmission loss.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotif snmptrap -v2c -c public <manager> '' 1.3.6.1.2.1.119.1.0.2
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:52724->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (306490868) 35 days, 11:21:48.68 SNMPv2-MIB::snmpTrapOID.0 = OID: DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotif
Start monitoring AAA server/Diameter agent (vendor-neutral, IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotif OID value, configure state conditions and alerts, and monitor any AAA server/Diameter agent (vendor-neutral, IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.119 | diameterBasePMIB | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1 | diameterBaseProtocolMIB | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1.0 | diameterBaseNotifications | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1.0.2 | dbpTransientFailureNotif | DIAMETER-BASE-PROTOCOL-MIB |