All MIBs › DIAMETER-BASE-PROTOCOL-MIB › dbpTransientFailureNotifEnabled
dbpTransientFailureNotifEnabled
Module: DIAMETER-BASE-PROTOCOL-MIB
OID (symbolic): DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotifEnabled
OID (numeric): 1.3.6.1.2.1.119.1.1.7.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting the value of this object to True(1) enables the dbpTransientFailure Notification.
What is dbpTransientFailureNotifEnabled?
Setting this object to true(1) enables the dbpTransientFailureNotif trap, sent whenever a peer's transient-failure counter (dbpPerPeerStatsTransientFailures) changes. An admin toggles it to get near-real-time alerts on recoverable Diameter failures rather than relying solely on polling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.119.1.1.7.2 snmpwalk -v2c -c public <target> DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotifEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.119.1.1.7.2.1 snmpget -v2c -c public <target> DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotifEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.119.1.1.7.2.1 s <value>
Start monitoring AAA server/Diameter agent (vendor-neutral, IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DIAMETER-BASE-PROTOCOL-MIB::dbpTransientFailureNotifEnabled OID value, configure state conditions and alerts, and monitor any AAA server/Diameter agent (vendor-neutral, IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.119 | diameterBasePMIB | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1 | diameterBaseProtocolMIB | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1.1 | diameterBaseObjects | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1.1.7 | dbpNotifCfgs | DIAMETER-BASE-PROTOCOL-MIB |
| 1.3.6.1.2.1.119.1.1.7.2 | dbpTransientFailureNotifEnabled | DIAMETER-BASE-PROTOCOL-MIB |